Resume - Experienced, commercially and technically aware Project / Construction Manager -...

Misco Jobs

Resume #23934

CONTACT INFORMATION:
View contact information...

EDUCATION:
University degree in civil engineering (M.S.), Bachelor degree in Economics

LANGUAGES English, German, French, Dutch and Portuguese

AREAS OF EXPERTISE
(1) Management of projects covering Design, procurement, fabrication, construction, installation, hook up and commissioning for projects involving:

(2) CALM buoys and Offshore terminals (refer to Sungai Udang, Sirte Oil, Cilacap, Upper Zakum, Girassol(deep water buoy), Erha (deepwater buoy), Ash Shirh terminal projects)

(3) FPSO's (refer to MISC FPSO, Espoir field development, Girassol and Rospo Mare projects), including topsides.

(4) Pipelines (refer to SHG, I-MNTW,SHW field development projects, Upper Zakum Main Oil Line & Loading lines, IPC-Heera trunk line project)

(5) Onshore pipelines and pump stations (refer to extension of Indian Oil terminal at Salaya and Sungai Udang projects)

(6) Jackets and decks (refer to SHG and I-MNTW projects)

(7) Hook up works (refer to SHG,I-MNTW,SHW, upgrading of BPB and wellhead platforms in Bombay high field)

In depth knowledge of contractual terms and conditions, keen commercial negociator.

Computer skills Extensive programming experience in C, FORTRAN, and Visual Basic languages.
Enthusiastic PC user, fully conversant with the use of word processing, spreadsheet, scheduling and data base software. Fully conversant with drafting programs such as AutoCad 2004, Microstation, Primavera planning package.

PROFESSIONAL EXPERIENCE
2004 September - present Pegasus Inc.
Position: Client representative
Responsibilities:
Management/Supervision of offshore pipeline installation contract on client's behalf (temporary replacement for incumbent)
Installation of Ashdod to Hadera pipeline with related onshore tie in works, offshore Israel, client Israel Electric Corporation Ltd.

The project encompasses the installation of a 30 inch pipeline, parallel to the coastline between the cities of Ashdod and Hadera, with landfall and tie-ins at 5 locations. Personal responsibilities covered interactions with authorities to secure permits for the works, coordination of IEC's (Israel Electric Corporation Ltd = Owner ) supplies with offshore works. Day to day coordination of works with the various parties involved, supervision of pipe-lay contractor.

2003- 2004 Stolt Offshore Services S.A.
Position: Deputy Project Manager
Responsibilies:
Management from engineering through field installation, including subcontract and vendor management of FPSO mooring and deep water offloading system.

PROJECTS
Erha Field, offshore Nigeria, client Exxon Mobil Exploration and Production Nigeria Ltd.
The project comprises the design, procurement, fabrication of suction mooring piles for FPSO anchoring system, CALM buoy deep water buoy providing support for off offloading lines, capable to transfer 4200 BOPH. The offloading buoy will be the largest buoy ever fabricated. Design phase was completed April 2004, fabrication started February 2004,

2002--2003 Intec Engineering SEA Sdn Bhd
Position: Construction Manager
Responsibilities:
Management of all aspects of the works performed by shipyard, topside fabricator and bow turret designer and fabricator. Starting with contract negotiations with shipyard, coordination of day to day works, interface management with contractors and suppliers. Project schedule and cost control

Projects
Conversion of MT "Bunga Kertas" to FPSO –Penara & North Lukut field, offshore Peninsular Malaysia- Malaysian International Shipping Corporation.

2001- 2002 Canadian Nexen Inc.
Position: Project Manager
Responsibilities
Management of all works related to the installation of second buoy and associated pipeline at Nexen's Ash Shihr Export Terminal. Starting project definition, budgeting followed by preparation of tender document, evaluation and contract award.

Projects
Second loading buoy and associated pipelines at Ash Shihr Export Terminal –Offshore Yemen-Canadian Nexen Petroleum Inc.

2000- 2001 Prosafe Production Pte Ltd (company formerly called Nortrans Offshore Pte Ltd. before take over early 2001)

Position: Project Manager

Responsibilities
Management of all activities related to a FPSO conversion project, covering the design, procurement & fabrication of all equipments, components for a floating production system. including its installation. Interface with client, supervision & coordination of design activities performed in house and by outside consultants, subcontractor and vendor supervision and inspection. Responsible for performance of all project activities within the budget, and in accordance with project schedule.

Projects
FPSO for Espoir field development – Espoir field offshore Ivory Coast – Client Ranger oil Cote D'Ivoire SARL – Processing capacity 45,000 BCPD and 40 MMSCF of gas per day

1998-2000 MPG – Mar Profundo Girasol – joint venture between Buoygues Offshore and Mc Dermott ETPM (Stolt Offshore)

Position: Project Manager loading buoy and FPSO mooring

Responsibilities
Management of all project activities related to the design, fabrication, transportation of an offloading system and installation of loading buoy & FPSO, both located in 1400 m water depth. Coordination and supervision of in house design work on loading lines and their interface with the loading buoy & FPSO. Contract negotiation, approval of design, site supervision and quality control of the works undertaken by the buoy manufacturer. Profit and loss responsibility for this part of the project. Emphasis was on the technically challenging aspects buoy project, the CALM buoy in the world's deepest waters, and the commercial complicated nature of this state of the art project. For the FPSO mooring system activities covered the design, procurement of the different components, and integration of these in the floater's hull. Development of detailed procedures for installation of both mooring buoy and FPSO on location.

Projects
FPSO laid out to process 200'000.-BOPD & Installation of a loading buoy and associated export lines, capable to receive 400'000 dwt tankers at MPG location offshore Angola, client Elf Exploration Angola

1997-1998 Intec Engineering, Houston, USA

Position: Construction Manager

Responsibilities

Overall management of Construction projects undertaken by Intec's regional office in Kuala Lumpur, Malaysia. Duties covered the overall coordination of the works design review & approval, contract negotiation, supervision and quality control of procurement activities and subcontracts, progress assessment, payment control, interfacing with client on a day to day basis and by formal presentation to client's board of directors. This position required a wide hands-on experience in contractual and technical matters. Training and education of local staff was part of the assigned responsibilities. Preparation of bid packages and pricing of new projects.

Projects
Installation of SPM system for 350'000 Dwt tankers at Sungai Udang (Melaka), client MRC, management of EPC contract

1995-1997 Company: GAL Offshore Services limited. Bombay, India

Position: General Manager/vice president Construction

Responsibilities
Set up from grass roots of offshore construction department Execution of all offshore works undertaken by the company.

Projects
My duties with this company started with setting up an offshore construction department to perform all activities from price preparation, commercial negotiations with client, project execution, till financial phase out of the project. Recently the company has merged with Great Eastern Shipping Company.

Installation of three replacement pipelines in the Dorood field, client Oceaneering, Owner, National Iranian Oil Company (NIOC),Location Kharg Island, Arabian Gulf

Upgrading of BPA-BPB platform's, subcontractor to Essar Oil Limited, Owner, Oil and Natural Gas Corporation, Location Bassein field, offshore India.

SHG remedial works, subcontractor to Daewooo shipbuilding and heavy Industries, Korea,, Owner, Oil and Natural Gas Corporation, Location Bombay High field, offshore India

Upgrading of wellhead platforms in Bombay High field. Subcontractor to Mazagon Docks,, Owner, Oil and Natural Gas Corporation, Location Bassein field, offshore India.

1991 - 1995 Company: National Petroleum Construction Company Abu Dhabi, United Arab Emirates

Position: Deputy Project Manager

Responsibilities
Overall project management responsibility for major Offshore Installation and Hook up Works for jackets and pipelines.

Projects
SHG Process complex client Oil and Natural Gas Commission, location Bombay High Field offshore India

The contract for these works was placed with a consortium formed between Daewoo Shipbuilding of South Korea, responsible for fabrication works, and N.P.C.C., covering all the offshore installation works. NPCC's scope of work included the installation in the Bombay High Field of the SHG platform, comprising a 8 legged jacket (weight 5500 mt), with 4 main piles and 16 skirt piles, and topsides(6 compressor modules and generator cum living quarters packages) and associated modification works on remote platforms, and laying of the related pipelines. Project management of all works involving daily management of in house departments, consultants, suppliers and subcontractors, for design, transportation, installation testing and commissioning of the platform and of 188 km of pipelines with diameters 10 through 28 inches, co¬ordination of procurement activities, interface with client and consultants, supervision of subcontractors. The contract value of 120 million US $, represented 50 percent of the yearly turnover of the company. Hook up works included modification works at 18 platforms in addition to the SHG decks. During the installation phase I was heading the Bombay based site office, with full responsibilities for client contacts, operational and logistic management of 4 installation barges spreads executing simultaneously the field works. An This project was completed on time on 31/04/1994 and within the budget.

l-MNTW infill platform project, subcontractor to Larsen and Toubro, Owner, Oil and Natural Gas commission, Location Bombay high field, offshore India

This project was run simultaneously with the SHG project described above. My personal tasks during this project were the same as for the SHG project. The project involved the installation of 4 wellhead Platforms (each 4 legged jackets, with 4 main piles and 4 skirt piles) and their topsides (one main deck and one helicopter deck) and a combined length of 78 km of pipelines in sizes ranging from 4 though 16 inches. This project was timely completed on 28/03/1994.

SHW project, Subcontractor to Daewoo Shipbuilding, Owner, Oil and Natural Gas Commission, location Bombay High Field offshore India.

Personal responsibilities were the same as described for the SHG & I-MNTW Projects. This Project consists of the installation of water injection platform and topsides, together with the laying of 16 km of pipelines of diameter. The scope of work covered by N.P.C.C. was launching, upending and setting of the jacket (weight 4500 mt) and it's associated deck. The scope of work for pipelines consisted of design, supply, coat and wrap, transportation, laying, testing and commissioning.

IPC-Heera trunk line, Client Oil and Natural Gas Commission, Location Bombay High & Heera Field, offshore India.

Installation of 120 km long 30 inch pipeline between the ICP and Heera platforms, with 5 laterals (branching),and 18 km long 22 inch branch line to the SHP platform. The water depth along the pipeline varies from 50 to 80 m. The pipeline is trenched to a cover of 1.2 M. Contractual sum was 60 mil US $.

1985– 1990

Company: Single Buoy Moorings, Monaco

Position: Manager Installation Department
Responsibilities:
Preparation of detailed procedures for installation Mooring Buoys, Floating Production Units, including loading lines and intra field pipelines. Development of Bid Packages for Installation Works, negotiation of contracts for execution of same. Monitoring of execution of offshore works, end of contract settlement and claim negotiation.

Projects
Installation of Mooring Buoy including Design, Procurement and Offshore pulling of 32 inch deballast line, Client Sumed, Location Sidi Kerir (Alexandria) Egypt

This project was carried out in co-operation with a local contractor, the technical emphasis was on the development of simplified techniques for survey and execution of the installation works(pipeline pulling, and trenching, buoy installation works with locally available barge). The project involved

The design and testing of a purpose built trenching machine that was to be used for post trenching the pipeline in the shore approach area.

Installation of spread mooring with a LPG loading line and associated vapor return line, client ENPPI location Red sea, Egypt.

Design and construction of 8 and 6 inch lines. The concrete coated pipelines were simultaneously pulled from onshore make up site to sea., with PLEM attached. The spread mooring consisted of four buoys, tied to the seabed by anchors. The contract included the installation of land lines (10 km) connecting the terminal to the onshore facilities.

Repair of 1O inch oil line at Ekpe platform client Mobil Oil Nigeria, location offshore Nigeria

Procedures and project management (including hands on offshore management of construction works) for repair of a 10 inch pipeline at Mobil's Ekpe platform The repair was carried out from a dynamic positioned diving vessel that was used to lift the pipeline to the surface where the tie in was made. During these works extensive use was made of ROV's to perform most of the subsea works.

Repair of a 6 and 8 inch pipeline, client ELF, location offshore Gabon.

Procedures and project management for repair of a 6 and 8 inch pipeline, including a study to install a lay ramp for small diameter pipelines on board of a dynamic positioned diving support vessel.

Installation SBM and 48 inch loading line at Sirte oil terminal, client Sirte oil Cy, Offshore the Libyan coast.

Design, fabrication and construction of a 48 inch loading line, installed by beach to sea pull using a subsea installed linear winch

Installation of 3O kV electrical cable at Djeno terminal client Elf Congo, location offshore Congo

Project management for installation of 30 km long electrical cable between an offshore platform and the onshore oil terminal.

Fabrication and installation of SBM, with associated extension of 42 inch oil line at ADCO oil terminal, client ADCO oil Cy, location offshore Abu Dhabi

Project management for design and construction phase of pipeline extension at ADCO's Abu Dhabi oil terminal, including the re-use of existing pipe supports and combined pipe cum plem installation from a lay barge.

1981 - 1985 Company Bouygues Offshore, Paris, France

Position: Project Manager Offshore projects

Responsibilities:
covered all aspects related to offshore contracting such as preparation of bids, design engineering, development of installation methods, follow up during execution of the works. Technical aspects included for platforms: jacket launching, upending and pile driving ;for pipelines: design (hydraulic, stability, weight coating design), detailed procedures for pipe laying riser installation, specification for all materials and services required for the project. Client relations from bid till claim settlement stage.

Projects
Installation of jacket, topsides and associated flow lines for process platforms in the Kambala and Takula fields, Client Gulf Oil Co., location offshore Cabinda.(West Africa)

Project management of the outfitting of lay ramp on the BOS 400 barge

1978 - 1981 Company: R.J. Brown and Associates Rijswijk, The Netherlands

Position: Project Engineer

Responsibilities:
Design of pipeline systems and supervision of construction activities on sealine installation works

Projects
Development of the Upper Zakum field, Client ADNOC, location Arabian Gulf offshore Abu Dhabi
48 inch pipeline across the Firth of Forth, client British Gas, location Scotland

24 inch gas line from North Rankin platform to Dampier client Woodside Petroleum Offshore Western Australia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 2493)

Go to Search Parameters...

Brief Description

Outstanding background of knowledge’s into oil and gas processing and utilities, more then 14 years experience into commissioning and process activities from which more than three years offshore, working into an multicultural team and with all disciplines engineers, proactive and disciplined

Sixteen (16) year experience in Venezuelan and international Oil Industry at Pre-commissioning, Commissioning & Operations of units, involving following areas: Oil, Gas and Multi-product Pipelines. Production: Free water knock out, Thermomecanicals treaters, Gas Heaters, Gas Lifting, Natural flow w

Over 20 years experience in LNG and Oil Refinery /Panel/Plant-Operator/Supervisor

25 years experience in LNG/Refinery plant/panel operations/commissioning

I have 15 years Lab experience such as 6 years of LNG plants, 7 years of Refineries and 3 years of Aromatic and PTA plant Labs experience with 5 new labs commissioned experience. I have a good knowledge regarding the dosing of corrosion inhibitor at wells side. I can conduct Oil & Gas analysis.

Field Acquisition QC. Over 20 Years experience in Land Seismic. 3D Design by OMNI and MESA. Field processing of 2D/3D land seismic data (MicroMax,ProMax, VISTA, APEX) . Creating and verification of SPS files. Static correction.

Working as In charge OIL/GAS LABORATORY TESTING OF LPG/C2C3/NAPHTHA/OIL ETC. PROCUREMENT/CALIBRATION/MAINTENANCE OF EQUIPMENTS

Ensure all plant/equipment/tools/materials are fit for use, and comply with the HS&E Management Plan, with regard to certification, permits and colour codes.

A four your degree holder with one year Shift Supervisor Process (SSP) and six years as a Control Room Operator on Shell Bonga offshore FPSO.Have various oil and gas experience offshore, swamp and land facilities.

Over 33 years of working experience within India and abroad as Electrical supervisor, Senior Electrical Foreman, Electrical Engineer Commissioning Engineer, Electrical specialist and Specialist Senior Consultant.

Seeking middle level management post having 17 years of experience in the field of utilites(HP Boiler(Gas/Oil fired),RO/DM PLANT,COOLING TOWERS,AIR COOLED CONDENSER AND MULTIPLE EVAPORATOR

20 years working on oil refinery as a tank farm panel operator.

Seismic field processing on Promax for 10 years and actually short experience on CGG software

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

•Worked as commissioning Engineer and Project Liaison Manager in four major Petrochemicals (Polymer) projects, worth $30 Million, $50 Million, $20 Millions and again $20 Millions.

EPC Attorney with Land Development and Regulatory Experience

B.Sc. in Geology, M. Sc. Geophysics Working as Co-coordinator & D. Geophysical Manager

HSE Advisor with 20+ years E & P Experience

30 years of professional experience. Having experience in seismic data acquisition and processing including velocity analysis, de-convolution,wavelet processing, migration velocity smoothing, VSP, Well logs, strong knowledge in computers and Seismic Unix processing. M. Sc (Exploration Geophysics).

I am a mathematics post graduate alongwith apprentice training in refiney technology. I have choosen refinery tech. as career. Approximately 17 years in Petroleum and Petrochemical industry working as a Plant Manager/superintendent/shift controller/ Supervisor / Operator including 13 year on ovseas.

I am an experienced engineer with productive employment and education in the field of processing, supervision, commissioning, start-up operations, production and design.

Petrochemical, Refinery, Oil and Gas, Processing, Oil movement and blending, Operations, Utilities, Off Sites, Construction, Commissioning, Construction, Start-up. Expatriate Supervisory and Managerial.

Pilot, mooringmaster, marine officer, marine superintendent, port captain

Having work skill in Fire Safety Engineering, Qualified in Fire & Safety

Experienced Cased Hole, Open Hole and Production Logging.

I am a chemical engineer working in Qatar Petroleum for past 10 years as a station in charge in Oil & Gas station and 8 years experience in petrochemical industry

Petroleum Technician in Drilling and Well Conditioning with expirience 23 years, in the oil industries ( Storage tanks farm and Terminal facilities).

QUALIFICATION Inorganic Chemical Process Engineering PROCESS UNIT OPERATED -Ammonia -Ammonium nitrate -Nitric acid -N.P.K. Plant -Melamine -Utilities -Boilers (gas fired) -Power plant (gas fired) -Gas turbines -Air separation -Steam turbines

I am a Well Service Supervisor with BSc in Petrochemical Science and Technology. I have 15 years specialized experience in supervision and execution of various well operations including: cementing, acidzing and matrix stimulation; fracturing; coil tubing; nitrogen handling and pumping; well kill op

Drilling Supervisor, Superintendent, Rig Manager, Operations Manager

22 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Team Oriented Land Drilling, Production and Management Professional

Oilfield Drilling or Completion Qualifications, Consultant or Foreman.

have over 14 years and 10 months experience in Refinery, Petrochemical and fertilizer fields in the area of Proces, operations, Pre commissioning and commissioning. I worked as Junior Manager –Process for 3 years in fertilizer field, as Senior Engineer and Shift engineer in hydrogen unit for 5 years

Mud Engineer

Energetic, good in communication and possess leadership quality. I am a Chemistry graduate with Masters degree in management. I have 12 plus years experience in oil and gas.

I am a petroleum engr, US citizen, with 20+ years experience as Drilling Supervisor, on & offshore, in drlg, completion, workover, testing, in the US and many other countries. Familiar with deviated drlg, horizontal, drlg underbalance, H2S, wkg in remote locs. Fluent English & Spanish.

Logistics Coordinator, Base Operations Manager, Barge Engineer, Chief Pilot

Process Technician/Chief Operator: 20+ years experience in the check out, commissioning, startup, and routine operation of the following - Oil Refinery process units, Petrochemical Plants, Gas Processing plants and Power Generation plants.

Free! Well control, safe, enviromental, health, horizontal drilling, coiled tubing completion, stimulation, multi mud programs

Free! My prospect right now is to use my combined experiences as LWD engineer and Senior directional driling engineer to manage people and equipments for field operations, main assets of the growing oil and gas business in a safe manner.

4 year Bachelor of engineering degree. 21 years total experience. Familiar with drilling/workover /fishing operations and tools. Past three years working as Company man/Drilling supervisor.

Extensive experience in the operations of oil & gas, refinery and hydrocarbon process

Experienced, commercially and technically aware Project / Construction Manager - Director. EPC project experienced for works up to 500 mil USD. Specialised in projects involving FPSO, offshore terminals (shallow and deep water), pipelines, platform fabrication, hook up and installation.

Over 19 years experience of Executive Secretarial, Administrative and Managerial services of very high professional level, in Saudi Arabia, Sultanate of Oman and India

I have twenty five years with Mobil/Duke energy in field and plant. I have three years with Northern Natural Gas as an operator

Over 25 years experience supervising the drillin of deep high pressure wells, both vertical & horizontial

Reliable and safety conscious, 41 Yrs old with 21 years plant operating experience in Oil and Gas Production, Gas Plant And petro-chemical industries within international environment

I am an aspiring and dynamic Process Plant Operations Personnel with supervisory skills and overall experience of about eighteen years in petrochemical industries, possessing a Diploma in Chemical Technology. Background includes supervision/ operation of continuous and batch process plants.

Engineering Graduate( B.Tech. Chemical Engg. – 4 years degree course) with 16 ½ Years Experience in Work Over Operations / Supervisor / Completion

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out