Resume - For the last five years I have been employed as a Research Technologist in a hyd...

Misco Jobs

Resume #25610

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
I am looking for new and exciting challenges to expand my knowledge and apply my experiences to. For the last five years I have been employed as a Research Technologist in a hydrocarbon laboratory. My background encompasses oil and gas analysis, FDA & cGMP quality control, as well as other types of analysis.

EXPERIENCE:
Research Technologist 11/2000 - 05/2005
Schlumberger Reservoir Fluids Centre; Edmonton, Alberta, Canada
- Oil & Gas phase behaviour analysis by PVT measurements
- Specialized testing such as Hydrate determination and Enhanced Oil Recovery
- Gas Chromatography analysis, calibration, and maintenance
- Software used: PVTpro, Hydrate, Sample Tracking Database
- Assisted in the development of new products and methods
- Laboratory equipment maintenance, calibration, and general upkeep
- Sampling of high and low pressure oils and gasses from production plants and pump stations

Quality Control Technician 08/2000 - 10/2000
Raylo Chemicals Ltd; Edmonton, Alberta, Canada
- Quality control of various final, intermediate, and raw pharmaceutical products
- Analysis by wet chemistry, HPLC, NMR, FT-IR, UV-Vis, TLC
- Recorded and reported all laboratory work according to FDA and cGMP guidelines
- Sampled products in clean rooms and in production plant

Research Technician 05/2000 - 07/2000
Sinnamon Brothers Ltd; Camrose, Alberta, Canada
- Developed technical reports for the development of a new product
- Examined technical information
- Assisted in research for the development of a pilot production plant

Chemical Technician 02/2000 - 05/2000
Core Laboratories Edmonton, Alberta, Canada
- Crude oil and water property analysis
- Recorded all laboratory work on Laboratory Information System
- Laboratory equipment calibration, maintenance, and housekeeping

Laboratory Technician 05/1999 - 10/1999
Alberta Research Council; Vegreville, Alberta, Canada
- Water quality analysis for an aquaculture pilot plant
- Standard, reagent, and solution preparation
- Developed and revised analytical methods
- Recorded and interpreted all laboratory work
- Laboratory equipment calibration and maintenance, pilot plant housekeeping and maintenance

Grocery / Produce Clerk 07/1994 - 08/1998
Red Deer Co-op; Red Deer, Alberta, Canada
- Attended to customer concerns and questions
- Stocked products, ordered inventory, general housekeeping

EDUCATION:
1999 Northern Alberta Institute of Technology Edmonton, Alberta, Canada
Chemical Technology Diploma

1998 Red Deer College Red Deer, Alberta, Canada
Chemical Technology - 1st Year

1996 Hunting Hills High School Red Deer, Alberta, Canada
High School Diploma

ACTIVITIES:
Golfing, Camping, Wood Working, Hockey, Fishing, Music

References:
Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 2478)

Go to Search Parameters...

Brief Description

I am an American, with over 27 years of experience in the Oil & Gas Industry, with 11 of those years worked internationally. Qualifications include postings at various organizations as Head of Field Operations, Construction Superintendent, Operations Specialist, and AWS Certified Welding Inspector.

Experianced Petroleum Graduate

Technical, Managment, communication. Skills

I have over 5 years experience in the Electronics engineering field; and I am well versed in the areas of process control and Automation issues in conjunction with Software knowledge and Hardware design guidelines

Project Management

Enviromental Process Engineer/Technician

Operations Manager; Telecommunications; Administrative; Business Development

Document Control / Project Administrator

To use and hone my technically organize skills, knowledge and experience to Attain excellence in the industry by providing total customer satisfaction in field of mechanical Industry.

Control room and plant operator, 10 + 2 +3 yrs of education, adequate computer knowledge, reciprocating,centrifugal pumps and compressors, handling DCS systems, experience-2yr 3 months in Oman,

Bachelor of Science in Mineral Engineering, eight years experience as a project/test manager for the explosives and ammunition testing industry. looking to transistion into the mining industry.

Masters Degree in Chemical Engineering

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

I am skilled in providing/developing HSE advice, HSE policies, accident/incident investigations, safety inspections, HSE training, Risk Assessments, emergency response/ evacuation procedures. I have obtained the National NEBOSH Certification in UK and the NISP - HSE certification in Nigeria

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Management, business, trading, oil and gas, adminstration, HR, petrolium

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Experience: Planning RC & DD drilling - Logging / Surveying & GIS / Sampling / Data modeling. Positions: Offshore geologist / field geologist / Project kimberlite geologist (Namibia & Angola).

I'm a well service / well intervention Supervisor

Open Crane Operator and Advanced Rigger

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

analyst

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Worked in chemical Industry for 14 years.

P&PCM, MBA, B.Arch

I am qualified as an operator for monitoring pressure, flow, temperature, gas, and liquid pipeline operations including pipeline, wells, refineries, and plants.

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

Operations Supervisor

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

10 Years Working As A Cartographer For QARUN Petroleum Company

Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Electration Engineer Trainee

Contract Administrator, Paralegal-PC/Microsoft Proficient

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

A dynamic professional with over 10 year of experience in Project Planning, Cost Control, Estimation, Quantity Surveying, Co-ordination and execution of MEI&P Projects. Proficient in Primavera Project Planner V3.1 & 6.0, Office XP/2000 and In-house soft wares for Client / Sub-contractor Billing

Electrical Engineer

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

MBA, experience in Clients relations and mutual fund industry.

For the last five years I have been employed as a Research Technologist in a hydrocarbon laboratory. My background encompasses oil and gas analysis, FDA & cGMP quality control, as well as other types of analysis.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out