Resume - Trained in handling Emerson Process Management (formerly Fisher-Rosemount System...

Misco Jobs

Resume #27752

CONTACT INFORMATION:
View contact information...

JOB DESCRIPTION AND DUTIES
* Trained in handling Emerson Process Management (formerly Fisher-Rosemount Systems) DeltaV Digital Control Systems (DCS) with Foundation Fieldbus field instruments at Emerson Process Management main Headquarters in Austin, Texas U.S.A. and Asia Pacific main Headquarters in Pandan Crescent, Singapore.
* Responsible for Installation, Startup, Testing, Commissioning & Maintenance of DCS including various process instrument field devices such as Temperature, Pressure, Flow, Level Transmitters, Analyzers and Control Valves.
* Responsible for Software Engineering & Configuration of DeltaV Digital Control Systems:
-Programming & Engineering of Process Control Logics using IEC 61131 Function Blocks Diagrams, Phase Logic Diagrams, Sequential Function Charts (SFC) & Structured Text.
-HMI/Operator Interface Display Build-Up & Modification using DeltaV's
Intellution Graphic i-Fix32.
-Commissioning and Calibration of Smart 4-20 mA / HART and Certified Foundation Fieldbus Devices Field Instrumentation Systems.
-System Integration of Real-Time process information using OPC (OLE for Process Control) and MODBUS Protocol from DeltaV DCS and non-DeltaV DCS.
-OSI PI and Sytech Report Generation Software based on customer's functional specification and project documentations.
- Configuration & Testing of DeltaV DCS Remote Workstations.
* In charge in conducting DCS Software Systems Factory Acceptance Test (FAT).
- Control Narratives
- Functional logics
- System Integration Test with other System Vendors.
* In charge in conducting DCS Hardware Systems Factory Acceptance Test (FAT).
- Cabinets Inspection
- Controllers & Power Supplies redundant test
- IO Cards channel testing
- Controller & IO Carriers inspection
- Wirings & Termination Inspection
- Network Interconnection & Testing
* Provide training, guidance and direction to Plant Operation Engineers & Instrument Technicians on the best utilization of DCS and proper installation / commissioning of Foundation Fieldbus Devices.
* Microsoft Operating System Installation (Windows NT 4.0 / Windows XP Professional, Windows Server 2003).
* Digital Control System Software installation and configuration setup.
* Onsite System Installation, Power-up, and Facility Coordination.
* In charge in preparation of project documentations and site software support.
* Provide Technical Support via Email, Fax, and Phone including Remote Connection to completed & turnover projects.

MAJOR PROJECT EXPERIENCES:

Oil & Gas Industry

SHELL PHILIPPINES EXPLORATION B.V. February 2000 – December 2003
The Malampaya Deep Water Gas to Power Project Palawan, Philippines

Designated as Process Automation Systems (PAS) Engineer on this newly installed Offshore Natural Gas Production Platform in the Philippines. Also part of the Malampaya Integrated Commissioning Team, which started in Singapore up to startup, commissioning & successful continuous Natural Gas production in Palawan. After post-project, I am still part of Secondary Health Care or Maintenance of the Malampaya Platform Digital Control & Instrumentation Systems.

The Malampaya Platform utilized the DeltaV Digital Control Systems (DCS) w/c has Intrinsically Safe System, Foundation Fieldbus Technology, OPC (OLE for Process Control), and Satellite communications which spanned communications over Ethernet. Integrated with the DeltaV DCS were Yokogawa Emergency Shutdown Systems (ESD), Fire and Gas Safety Systems, Cooper Rolls Entronics Export Gas Compression System, Cooper Cameron Sub Sea Integration, SKF Vibration Monitoring, Polar Condensate Metering System & Cadence Advanced Process Control. Each of these vendors integrates using OPC. While Allen Bradley & GE PLC of Solar Turbine were integrated on DeltaV DCS using the MODBUS Protocol.

Duties and Responsibilities

* As a PAS Engineer, I am responsible for PAS Control Logic Engineering / Programming, HMI/Operator Interface Graphics Display Build-Up, OPC Mapping & PI Report Generation based on customer's functional specification and project documentations.
* Commission and Calibrate Foundation Fieldbus Field Devices namely Fisher Fieldvue DVC5000F Digital Valve Controller, Rosemount 3051 Pressure Transmitter, 3244 Multi Variable Temperature Transmitter, 8800 Vortex Flow Transmitter, Micromotion 2000 Coriolis Mass Flow Transmitter, Rosemount Analytical OXT5000 Oxygen Analyzer and Rotork FF Motorized Valve.
* Responsible for conducting Factory Acceptance Test (FAT) on Software System Setup such as
Customers Control narratives, Functional logics and System Integration Test with other Vendors in our principal main headquarters in Emerson Process Management, Austin Texas, U.S.A.
* Responsible for conducting Factory Acceptance Testing (FAT) on Hardware System Setup such as Rittal Cabinets, DeltaV Redundant Controllers, Redundant Power Supplies, IO & Fieldbus Cards, in our principal distributor Headquarters in Puffer-Sweiven, Houston Texas, U.S.A.
* Provide training, guidance and direction to SPEX Plant Operation Engineers & Fluor-Amec Instrument Technicians on the best utilization of DCS and proper installation / commissioning of Foundation Fieldbus Technology as integrated to the DeltaV DCS.

Power & Energy Industry

UNOCAL-PHILIPPINE GEOTHERMAL INC. (PGI) January 2000 - February 2000
Bar-08 Permanent Corrosion Mitigation Setup Project Tiwi Albay, Philippines

In this project I am the Lead DCS Engineer. The DeltaV Digital Control System consisting of 20 points 9 of these were Foundation Fieldbus Transmitters and one Remote workstation for monitoring remote processes.

Duties and Responsibilities

* In this project, I am in charge of DCS Hardware/Software configuration, installation setup that also includes commissioning and calibration of Rosemount 3051 Foundation Fieldbus Pressure Transmitters.

* Control Logic design, programming of Pumps, Motorized Valves & Flow integration, Graphics Display Build-Up, & Operator Interface.

* Full responsibility of DCS customer site Installation, System Power-up, Testing & Commissioning and Facility Site Coordination.

PETROCHEMICAL INDUSTRY

BASF PHILIPPINES, INC. February 1999 - January 2000
Acrylic Dispersion Plant Project Laguna Ind'l Park, Philippines

In this project I am the only lead DCS Engineer. The DeltaV Digital Control System consisting of more than 400 points and integrated with HIMA Emergency Shutdown System (ESD) through RS232C Serial Interface using the MODBUS Protocol for communication. The processes were mainly batch sequence producing different types of Chemical Product.

Duties and Responsibilities

* Responsible for DCS Hardware and Software configuration and installation setup.

* Responsible for Control Logic Engineering / Programming, Graphics Configuration, Operator Interface, & Report Generation based on customer's functional specification and project documentations.

* Responsible for conducting Factory Acceptance Test (FAT) on Hardware and Software System Setup together with the customers in our Asia Pacific main headquarters at Fisher-Rosemount Systems, Singapore.

* Full responsibility of DCS customer site Installation, Site Acceptance Test (SAT), System Startup, Testing & Commissioning and Facility Site Coordination in Canlubang Laguna, Philippines.

* Responsible for conducting extensive DCS Training to all Plant Production Operators, Engineers, Supervisors, Managers during and after successful site commissioning at customer premises.

* Responsible for project documentations, site software support, and post project support.

Oil & Gas Industry

SHELL PHILIPPINE PETROLEUM CORP. REFINERY (SPPC) Jan 1999 - Jan 1999
SWAF Project Pililla Rizal, Philippines

Duties and Responsibilities

* In this short-term project I am responsible for upgrading of Saab Tank Radar Electronic Processing Unit (EPU) EPROMS and do online testing.

SHELL PHILIPPINE PETROLEUM CORP. REFINERY (SPPC) Oct 1998 – Dec 1998
Utilities Re-Instrumentation Phase I Project Pililla Rizal, Philippines

Duties and Responsibilities

* In this 2 months project I am responsible of installing MTL Multiplexer Systems for monitoring process temperature and pressure transmitter readings of the refinery equipments. Using third party software we were able to locate each address via MODBUS Protocol and integrated to SPPC's existing Yokogawa DCS.

PREVIOUS WORK EXPERIENCE

POSITION TITLE: TEST ENGINEER

COMPANY: ADTX Systems Inc. (formerly APTI-Philippines Inc.)
5F Citibank Fravelle Bldg. Madrigal Business Park
Alabang-Zapote Road, Muntinlupa City, Philippines 1770

INDUSTRY: Information Technology (Research & Development)

DATE EMPLOYED: January 1997 – August 1997

JOB DESCRIPTION AND DUTIES

* Responsible for high speed laser printers Hardware and Software System
Performance Test under different Networking and Operating Systems Environment.
* Responsible for testing of developed laser printer cards and reloading latest release versions of microcode.
* In charge in the preparation of database reports both printer hardware and software printouts bugs/errors and elaborate the degree of severity encountered to programmers.

POSITION TITLE: SYSTEMS & SERVICE ENGINEER
(Building Automation Systems)

COMPANY: Electro-Systems Industries Corporation
# 399 Enzo Bldg. Sen. Gil Puyat Avenue
Makati City, Philippines

INDUSTRY: Consulting (Engineering & Technical Services)

DATE EMPLOYED: July 1995 – December 1996

JOB DESCRIPTION AND DUTIES

* Responsible for the Design of Hardware and Software Systems of different client's
Building Automation System (BAS).
* Responsible for Building Automation Systems engineering / programming, graphics configuration, HMI Graphics, report generation based on customer's functional specification and project documentations.
* Full responsibility of system site installation, startup, testing & commissioning and onsite facility coordination.
* Provide Technical Support (troubleshooting, repairing, and monthly preventive maintenance) to Hardware & Software of commissioned BAS Projects.
EDUCATIONAL BACKGROUND

University: AMA Computer University
Quezon City, Philippines
Degree: Bachelor of Science in Computer Engineering (BS ComEng)
(1991 to 1995)

LANGUAGES: Filipino and English

SEMINARS & TRAININGS ATTENDED
1. Further Offshore Emergency Training (FOET)
Date: September 15, 2004
Place: IDESS, Subic

2. Personal Survival at Sea
Date: March 07-08, 2001
Place: Loyang, Singapore
Conducted by: ALERT Disaster Control

3. HELICOPTER SAFETY & EGRESS
Date: March 08, 2001
Place: Loyang, Singapore
Conducted by: ALERT Disaster Control

4. BREATING APPARATUS & SELF RESCUE
Date: March 09, 2001
Place: Loyang, Singapore
Conducted by: ALERT Disaster Control

5. FIRE –INITIAL RESPONSE –EXTINGUISHER
Date: March 09, 2001
Place: Loyang, Singapore
Conducted by: ALERT Disaster Control

6. DeltaV Digital Control Systems Version 7.2 Enhancement
(Windows XP Version)

Date: June 26 - 27 2003
Place: Emerson Global Support Center
5th Floor, San Miguel Properties Inc., Bldg.
Mandaluyong City, Philippines
Conducted by: Mr. Quay Finefrock
(DeltaV Engineer, Hawksite)
Emerson Process Management, Austin Texas U.S.A.

7. Administering Microsoft Windows NT Server 4.0

Date: May 02 -04 2001
Place: Edupro Inc., Makati City, Philippines
Conducted by: Mr. Frederick L. Perito
(Microsoft Certified Trainer)

8. DeltaV Digital Control Systems (On-the-Job Training)
a) Project Implementation b) System Network Training c) System Configuration, Integration, and Test Training d) DeltaV Implementation II (Course 7017)
e) Foundation Fieldbus Systems & Devices (Course 7032)

Date: February - August 2000
Place: Fisher-Rosemount Systems Inc.
Austin, Texas USA
Conducted by: The Malampaya Project Development Team
DeltaV Digital Control Systems

9. Rosemount Measurement Technology Training
Fundamentals of Process Control

Date: November 04-06 1998
Place: TMIC, Training Room
Conducted by: Mr. Mohd Rafi
(Process Control Lecturer)

10. Seminar on Supervisory Control System (SCADA) with
Programmable Logic Controllers (PLC)

Date: March 14, 1998
Place: UP ISSI, University of the Philippines Diliman
Quezon City, Philippines
Conducted by: Mr. Marvin Joven
(Resource Lecturer)

11. Fisher - Rosemount System DeltaV Distributed Control Systems
Certification Training Course 7011

Date: January 12 -16 1998
Place: Fisher-Rosemount Systems, Singapore
Conducted by: Mr. Vinud Vasnani
(Senior DeltaV Engineer)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 2486)

Go to Search Parameters...

Brief Description

I have experiance in sulphoric and sulphonation factories

Experienced NCCER-CSST Safety Technician,Paramedic OSHA 10,30,500, Army Corps of Engineers, Near- Miss Hazard Recognition and Root Cause Investigation Reporting, AHA/CPR Instructor,

IT professional with over 20 years of experience. He holds certifications from a international security standard - CISSP and is awaiting confirmation of his CBCP, MBCI and CCM (Business Continuity)

A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

I'm a 33 year old African (Tanzanian) male, a holder of Bachelor of science (chemistry/Botany) degree. I've over the years accumulatedgreat analytical and technical skills, excellent communication and interpersonal skills, a team player and a very fast learner able to cope and fit in fast.

Official Tendering Works regarding tender requirements, Preparing documents, Co-ordination with GSECL,Supervise the Sites of 66/132/220/400 KV Substation & Transmission Lines, O & M Works

27 years of mechanical and process engineering

Electrical / mechanical service tech

Experienced electrical contractor, foreman, and electrician, with expertise in machine/process control, motors & controls, power distribution, general wiring. Worldwide experience, including work in Antarctica, Mexico, Iraq, Taiwan, and Mongolia

Familiar with International Codes and Standards such as AWS, ASME, API, ASTM, BS, ASNT, JIS and good knowledge in welding processes like GTAW, SMAW, SAW, FCAW/GMAW with specialization in aluminium / titanium welding process and procedure.

Responsible of Logistic, Warehouse, Purchase for Inter. Infrastructure Works Contractors

NACE INTERNATIONAL Recognised CIP III Qualified Coating Inspector

A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player

Camp, facilities, catering Management

I am a graduate of Eastern Michigan University and enthusiastic to work in my field. I am a hard worker, efficient, accurate, knowledgeable and I am eager to continue my education both through job experience and additional classroom learning

6 Years experience in PVT oil and condensate sampling, analysis, simulation, calculation, interpretation, flow assurance and EOR studies, Extensive field and laboratory experience; operations and supervisory.

Over six years experience as a professional geologist with training in petroleum geology, mining geology and geochemistry

Fire, Emergency Services, Trainer/Instructor, OPITO, NEBOSH

911 Paramedic with 10+ years in emergency medicine to include former Army EFMB medic and USAF medical technician.

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 Production trains to 4 marine offloading systems

Ex Firefighter 18 years, Breathing Apparatus, Confined Spaces, Fully Qualified Pllease view my CV

I&C ENGINEER - 9 years experience. Control Valves, flowmeters, shutdown systems, proximity sensors, and PLC programming. Oil Production, Refineries, Power Plants.

Master Mariner, Class 1: Graduate doing MBA: Employed as Planning Manager with a Container Company

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

As site Geophysicist/ project coordinator in UNICEF (United Nation Children and Education Funds), Geologist for GABIMO ENGINEERING CO LTD and National Water Resources Institute my principal responsibilities were to ensure that all projects were carried out in consonance with requirements and standar

Trained in handling Emerson Process Management (formerly Fisher-Rosemount Systems) DeltaV Digital Control Systems (DCS) with Foundation Fieldbus field instruments at Emerson Process Management main Headquarters in Austin, Texas U.S.A. and Asia Pacific main Headquarters in Pandan Crescent, Singapore.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

CMIOSH - Sr. Industrial Hygienist : Expertise in writing & implementing OH Procedures, conducting HSE Training, Inspection, Audits, Risk & Industrial hygiene Exposure Assessment & Monitoring etc. Able to work with little guidance, hold good inter-personal relations & transparent communication skill.

Sales operations manager/ Account manager

Fire Prevention, Job Safety Analysis, Hazard Analysis, TOR,

CAT parts logistics supervisor with five years experience in supply chain management and 8 years experience in Multinational organizations. I hold a bachelor degree in Commerce, political science, commercial representation certificate from the ministry of foreign trade & a certified Java programmer.

I have 5 years experience in power station operation and maintenance Gas turbine(GE LM 6000 PC&PD),steam turbine(Mistubishi 300MW)

Projects Management / Technology Consultant / Business Development & Management of Information Systems

HND holder in Mechanical Engineering Technology. Have Experience in Offshore Equipment Maintenance and Services. Pipeline design and Construction. Design of Machine elements and Petroleum Drilling and Production.

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

Possess a background in Security including BS Justice Studies, US Military, Federal Law Enforcement, and Int'l Security Mgmt experience.

My skills include operation of a voriaty of heavy equipment in the areas of enviromental, paving, dirt and utility work

Specialist in Security, Safety and Risk management

I have completed Masters degree in Geological Sciences from Jahangirnagar University, Bangladesh in 2002. I am citizen of Bangladesh. Now I working as an Assistant Manager(Training) in Gas Transmission Company Limited in Gas sector of Bangladesh Government. But as a background of Geological sciences

Detailed experience within the Barnett Shale, including title research, abstracting, lease composition, surface and mineral acquisition.

I am an exploration geologist ,4year degree,of 3 years old field experience in gold exploration,grassroot to target delination including project management

Entry Level Electrical/Instrumentation Engineer. Senior Field Engineer LWD/MWD with Schlumberger in different countries. Strong prepartion for projects and Jobs will lead to over expected results.

HSE ENGINEER

With a Chemical Engineering degree and 5 years experience in Oil & Gas, Water Treatment, Quality Control and Project Management, I possess strong analytical, quantitative, communication, management and problem–solving skills. My initial objective is to build on these skills, gaining full chartered

I am keen to be considered for Graduate Mechanical Engineer, I have recently completed a Masters in Mechanical Engineering at University of South Australia. I have seven months experience worked for Praga Tools Ltd, India, as a Junior Production Engineer,

Senior Process Engineer with 13 years of Experience in Petrochemical and LNG process

Im a highly qualified Gas turbine operator/ I have worked on Construction/Commissioning/Operation Of Alstom GT13E2, TM 2500,GE Frame 9,6, and Solar Gas Turbines

To obtain a 2nd class welder/boilermaker position that utilises my vast experience as a welder and my experience with steel fabrication.]

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out