Resume - I have extensive experience in Production Operations in the oil and gas industry...

Misco Jobs

Resume #312

CONTACT INFORMATION:
View contact information...

POST APPLIED FOR: Snr Production Engineer

OBJECTIVE
To work in a dynamic and challenging organization with opportunity to make reasonable contributions.

EXPERIENCE
Nov 2004 – Date Addax Petroleum Development (Nig) Limited,
Senior Production, Victoria Island, Lagos, Nigeria.
Engineer
* Production Surveillance and Project Management Measure.
* Pressure Transient tests Review.
* Well-by-Well Production Performance Analysis.
* Tracking/improving facility performance.
* Gas Lift Optimization and Performance Review.
* Production Accounting and Allocation Systems.
* Carry out schedule safety checklist (Including PSV and SSV integrity test).
* Production Deferment Tracking and proffering reduction plan.
* Production Data Management using ADDWELL software.
* Carry out Monthly/Quarterly/Annual Technical Review.

May 1997 – Oct 2004 ConocoPhillips Nigeria Limited,
Production Operations Thro: Overseas Technical Service, Lagos.
Engineer
* Surveillance and Daily Accounting of Crude oil Production.
* Maximum Efficiency Rate (MER), Pressure Transient tests data acquisition and basic Reservoir Engineering Practice.
* Maintain sound Production Management measure; evaluate Production and water injection data (using DCS), equipment simulation and root cause failure analysis. Tracking/improving facility performance.
* Carry out wellhead activities: including using 'Data Buddy' software to retrieve real time downhole parameters. Gas processing and metering.
* Carry out schedule safety checklist (Including PSV and SSV integrity test).
* Produced water treatment and Emulsion problem resolution.
* Developed Job Hazard Analysis database for Ukpokiti field facilities.
* Involved in the commissioning, Startup, Turn Around Maintenance and design modifications of Ukpokiti field Facilities with FPSO.
* Use 'Omni View' software for Crude oil lifting, meter proving and Positive Displacement meter calibration.
* Maintain & Prove the Bi-lateral Prover-Loop using Master meter method.
* Basics of well completion, workover, IPR and stimulation.
* Prepare morning report, Operations meeting and work with interdisciplinary team as well as a team player.

Jan. 1997-May1997. Petroscan Nigeria Limited, Trans Amadi Ind. L/Out, Port Harcourt.
Waste Mgt. Engineer
* Drilled cutting treatment and oil field waste re-injection as a means of environmental control.
* Maintenance of related environmental control equipment.
* Involved in the pioneering work of the cutting re-injection Project in Nigeria (SPDC well Bonny 8).

Apr 1995 – Dec.1996 Geoservices Nigeria Limited, P. O. Box 5133, Port Harcourt.
Production Engineer
* Crude oil Separation for test analysis.
* Well test data acquisition using 'Geobase' software
* Surface oil and gas sampling.
* Calibration of gauges and coil tubing operations.
* Maintenance of Separator, Manifold and other Production facilities.

Jun.1994 – May 1995 Shell Petroleum Development Company, Box 230 Warri, Delta State.
Production Engineer. (NYSC)
* Monitoring of Operation at Forcados Terminal.
* Evaluation of crude oil parameters.
* Receiving and lifting of crude oil.

May 1992 – Dec.1992 Shell Petroleum Development Company, Box 263, Port Harcourt
Wellsite Petroleum Engr.(Industrial Trainee)
* Assist in Execution of Wellsite Operations; drilling, workover, well testing and lots more.

SCHOOLS ATTENDED WITH DATES
1997 – 1999. University of Port Harcourt, Masters of Engineering in
PMB 5323, Port Harcourt, Petroleum Engineering
(Production Engineering Option)

1988 – 1993 University of Port Harcourt, Bachelors of Engineering in
PMB 5323, Port Harcourt, Petroleum Engineering
(Second Class Honors)

1981 – 1986 Govt. Sec. Sch., Borokiri, West African School Certificate
Port Harcourt.

1975 – 1981 Holy Trinity State School, First School Leaving Certificate.
Port Harcourt

SEMINAR/RESEARCH
* Evaluation of Water Flooding Injectivity
Ukpokiti Field Experience (M.Eng. Thesis)
* Permeability and Porosity correlation – Niger Delta Case study.
(B.Eng. Project)
* Optimizing Recovery Using A Good Work-over Fluid.
(SPE Paper, Warri '93)
* Sand deposit level detection in Separator using thermal gradient approach.
(Research Work at Conoco)

TRAINING
* Basic Terminal (Floating, Production, Storage and Off-taking vessel) Operation at Conoco Energy.
* Surface Production Facilities Operation.
* Basic Instrumentation and Controls.
* Training on 'CASHES', First Aid, Sea Survival, Social Responsibilities, CPR, Fire Appreciation. (STCW '95 Convention)
* Weekly Fire Fighting/Abandon Drills, Spillage Containment and Pollution Prevention. Seminar on Permit To Work issues.
* Process For Continuous Safety Improvement (PCSI).
* Passed SHELL and CONOCO Energy Swimming Proficiency Test.

PROFESSIONAL AFFILIATION
Corporate Member (no: 11475),
Nigerian Society of Engineers,
Engineering Close, V/I, LAGOS

Graduate Member (No 156800)
Society of Petroleum Engineers
Richardson, TX, United States.

COMPUTER LITERACY
Able to use basic (MS Word & etc) and menu driven software packages

HOBBIES
Dxing, Football, Swimming, Chess, Music, Reading, Current Affairs,
Meeting People and Having Responsibility

EXTRA CURRICULAR ACTIVITIES
The Executive President (1992/93 Session)
Society of Petroleum Engineers
University of Port Harcourt

The General Secretary (1991/92 Session)
Nigerian Universities Engineering Students' Association
University of Port Harcourt

REFEREES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 2478)

Go to Search Parameters...

Brief Description

operation and monitoring

I have wide industry experience in leadership, engineering, commissioning, maintenance and production mainly in the Oil and Gas industry. This experience includes both onshore and offshore production facilities including 7 years on an offshore production and drilling platform.

Throughout more than 18 years of Field/Head office experience in petroleum engineering.

I have 19 years experience in petrochemical plants since 1986, as a SENIOR PROCESS OPERATOR. Please read my cv and give me reply immediately. Present I am working the Andhra petrochemical plant as a senior process operator.

Multi-talented, goal driven manager/engineer with a broad base of technical know-how and skills that allows driving fast-track projects from all the angles required to ensure parallel development of safety, cost control, EPC, procedures and implementation.

i have 9 years experience in well testing as well test operator and well testing supervisor and have tested all kind of well and reseviors

Oil and Gas processing Engineer

Process Assistant Shift Supervisor, Maintenance Coordinator, Turnaround Coordinator, Process Control Room Operator

I am a post graduate in Chemistry as well as Ecology and Environment. I have worked with Petrochemical industries for the past 18 years. Presently I am working with Veba oil Operation, Libya for the last 2 years as water treatment specialist. I am well experienced in DCS operated production also.

09 years of experience in an oil refinery as field operator at coke handling unit with Kuwait National Petroleum

Seismic data processing, acquisition.

Senior Drilling Supervisor for 12 years. 19 years in oil industry. •Enthusiastic, determined, adaptable and focused with a good sense of humor. •Excellent management and team working skills, experienced in a wide range of cultures and environments.

working as senior production trainer refinery at petrosa south africa. was shift supervisor commissioned 3 refinery units from scratch as shift supervisor, see resume

To obtain a job in the in the Oil and Gas Industry that will challenge my abilities.

I,m familiar to operate with various analytical Instruments Laboratory such as Gas Chromatograph, AAS, Spectrophotometer (Visible, UV,IR) , bomb calorimeter, viscosity meter, flash point meter, pH meter, turbidity meter, conductivity meter, glass ware apparatus for titrimetric method.

Coil Tubing , 18 yrs worldwide, Coordinator, CT Drilling Systems, Project Engineering/Manager

Can setup run &standardise petroleu testing lab. Familiar with all petrleum product testings, full acquainted with ISO-9002 Quality assurance system & with MS Office & email/internet applications. Accredited as Petroleum Inspector from IFIA, UK. Neatness, accuracy, thoroughness in work

Operates processes in the plant and handled control room DCS or PLC, mostly equipment such waste gas treatment plant, waste water treatment plant, chiller, air compressor, kneader, calciner, cooling tower, furnace and knowledge in the tank farm activities, some analysis required in the process

Control Room Operator (DCS)Honeywell Chief Operator/Step-up Chief Operator Honeywell TDC2000/3000/Plantscape Refinery Unit Trainer - Classroom/OJT Technical Writer/Author (Procedures) Refinery Unit Start-up/Shut Down Commission New Equipment/Processes Precommissioning Coordinator Safety

Dear Sir/Madam: My goal is to obtain a entry level position in a drilling crew in offshore, anywhere around the world.

1997 I am joint as schlumberger company in batam.as warehouse man.2001 transfer to jakarta this same company as field operator.2003 as crew barge for java sea for other job:cementing job,stimulation job,and filtration job.

Production/Process/Panel Operator in Oil & Gas upstream Industry.

10 YRS EXP IN TERMINAL OPERATIONS

Iam an innovative, dedicative, initiative and dynamic HSE person. I have experience 15 years in HSE OIL and Gas Industry, especially in develop HSE Management System, Environmental Management System ISO 14001 and Contractor HSE Mnagement System.

Experienced Rig Safety Officer capable of performing Audits to verify compliance to company’s Policies and Procedures. Conduct SMS audits on Rigs to. Conducted Training sessions to rig personnel in Safety and Emergency Procedures. Cooperate with all disciplines to improve effectivness of the SMS.

DCS OPERATOR

Process / Systems / Operations

Drilling Superintendent - Senior Drilling Supervisor, International Positions Only

Objective: To share knowledge on Best Practices on Health, Safety and Environment (HSE) in the development and implementation of HSE Management System and promote a culture of Continuous Improvement.

I have extensive experience in Production Operations in the oil and gas industry.

Experience in Exploration and Development Geology, having involved in exploration of new areas and Enhancing of Oil Recovery in the fields of Northern Potwar Deform Zone and Middle Indus Basin of Pakistan. Day to day duties include studying the current reservoir properties via interpretation of geop

Oil and gas Utilities Senior Operator, start up, power plant shift enginner

My name is Garry Jennings and I would like to introduce myself as a possible candidate for the fulltime Operations Technicians positions.

TECHNICAL QUALIFICATIONS:

Master Degree Of Science Major In (( Synthesis of cascaded refrigeration systems)), *PUBLICATION:F. Rabea, S. aly and M. awad," Fuzzy approach for cascade Refrigeration Synthesis ", HYDROCARBON PROCESSING March 2008.VOL.87 NO.3,** HYSYS PROCESS SIMULATOR , Word – Excel – Power pointInternet,windows*

Oil wells,oil process,gas dehydration,control room DCS,storage & dispatching etc

i am chemical engineer and have 11 years experience

Logistics /Material Controller

Batchelor Degree, Chemistry with 17 years of exeperince in Process Industry

Business unit management to include multiple sites

Wellsite Geologist onshore and offshore drilling rigs.

I have experience in mud logging since 7+ years, both national and international, presently working in gabon as data engg in geolog international company, i have studied MSc., Applied geology, i was work in vertical/directional/drain hole.

I am a Petroleum Engineer with BSC degree. I am working at Oasis( Waha) Oil company for about 14 years. I worked in many section drilling & Workover as Company man on rigs, supervisor at Waha office, Production operator, foreman, Prod Supvr. 28 weeks Drillg & Prod. in U.K, 4 weeks Hor. Drlg Canada

Graduate in chemistry having 17yrs experience in the field of refinery operation including 12yrs overseas experience,currently working SaudiAramco-ExxonMobil refinery in yanbu,saudi arabia,having experience in precommissioning,commissioning and start up of the refinery, looking for a suitable job.

I currently hold the position of Marine Superintendent for BP Americas. I have an OIM license with Barge Supervisor endorsement.

I have four Years of experience in Desert at the Yemen. 1. Maintenance automatic systems at the Oil &Gas Field, Oil &Gas processing, pipelines and terminals.Maintenance CAMP equipment. 3. I make the orders on spare parts for Equipment.

Control-Room Panel operation involving, supervision of continuous operations and experience in monitoring and control operations involving production and process control in petrochemical and Oil & Gas production facilities using DCS (Distributed Control System).

Flexible, skilled mechanical engineer, specialised in high safety Operations like the Ariane 4 Launcher Assembly, Team leader, excellent English and French, search for job from Companies interested to increase business abroad

PETROLEUM ENGINEER, WORK OVER SUPERVISOR, WELL SERVICE, FACILITY ENGINEERING, WELL TESTING, ARTIFICIAL LIFT, ONSHORE/OFFSHORE OPERATIONS

Offshore and land rig maintenance(18years experience, mechanical & electrical). College Grad. Naval Nuclear Power - Mechanical Operator - Submarines Diesel overhauls on CAT D-399's (27). Many SCR schools and numerous technical schools.

1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out