Resume - Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochem...

Misco Jobs

Resume #36450

CONTACT INFORMATION:
View contact information...

SR. PROCESS ENGINEER WITH EXPERIENCE IN OIL AND GAS, PETROCHEMICAL

Key Functional Skills

* Unit Engineering Specialist for LNG plant.

* Review of PFD, P&IDs, Process circuit hydraulics, Heat exchanger design, safety valve sizing, Control valve sizing and process calculations.

* Skilled in use of process engineering simulation models and other software packages, computer tools.

* HAZOP studies, Preparation of operating manuals, Generation of technical concepts and reports, etc.

* Man-hour estimation, Planning and scheduling of activities, input to Planning, execution of activities as per Company procedures and Quality Assurance.

* Techno-economic feasibility studies for new projects including basis of design.

Brief Profile
* Bachelor of Technology ( B.Tech.) in Chemical Engineering.

* Certified Energy Manager.

* 14 Years experience in process of Petrochemical and Gas plant in Operations and Process engineering discipline.

* Proficiency in English language and expertise in technical report writing.

Work Experience
Technip Middle East, Doha, Qatar
(Deputed to RasGas Company Limited, Ras laffan, Qatar)

SENIOR PROCESS ENGINEER
Jan 2007 - Till Date
Job Profile:

„« Provide quality engineering services to LNG plant Operations. Review summaries prepared by Process Engineers. Discuss irregularities/ deviations with Process engineer, Operations and provide suggestions as required. To assist in smooth and efficient operations of plants.
„« Identify problem areas and propose solutions and check similar proposals submitted by process engineers. To provide suitable and cost effective solutions for process¡Vrelated problems.
„« To carry out effective trouble shooting of process abnormalities. Effective tuning of Selexol system to produce on-spec gas resulting in minimisation of flaring and increase in sales volumes.
„« Facilitate Risk Assesments for Change in Facility, Operations, Process parameters to quantify the risk and communicate to the management for approval.
„« Proficient in usage of FMEA tools like Meridium. Performed the role of Principle analyst for process related Root Cause Failure Analysis and have been member of RCFA and Bad Actor analysis Teams.
„« Review Profit Improvement Program items, yields, catalyst, chemicals, operating conditions and initiate changes as required to assist in improving profitability. As a team successfully completed the High Rate Test of Gas plant resulting in 16% increase in capacity. Acknowledged by the Asset Manager by awarding SUHKRAN.
„« Conceptualise and review plant modifications, checking of data, design basis for new projects, reviewing of PFDs, P&IDs data sheets, drawings, participate in HAZOP, commissioning and performance tests. Process discipline representative for LNG asset re-Hazop. Took part in new initiatives like Alarm Rationalisation, Control loop tuning, etc.
„« Effective communication and leadership qualities to align discipline engineers with the Asset team objectives and priorities.
„« To review process feasibility of proposed plant modifications. To check project objectives, compatibility with existing facilities are met. Ensure changes are made through Management Of Change procedures. Co-ordinator of Asset Team Opportunity Management System.
„« Recommend timing, schedule and review operating conditions for catalyst regeneration, test runs. Ensure guarantees are met. Submit Technical report on test run results with recommendations for management approval. Conducted breakthrough test of LPG treaters molecular sieve beds and submitted results to the licensor for evaluating residual life time.
„« Support operations in shutdown planning and execution. Member of the Asset Shutdown team and executed shutdown on lines of EXXON MOBIL shutdown management system. Ensured Quality and Quantity in activities like Chemicals (Dehydration unit Molecular sieves) loading, replacement of Knock out drum demisters with High Performance Mist Eliminators. Carried out vessel inspections from a process engineering perspective.
„« Asset representative in POBP team for analysis of Volumetric Downtime and Benchmarking of Asset based on performance.
„« Review existing technology while keeping abreast of new developments to determine its suitability/ feasibility. To ensure that pre-feasibility studies are undertaken in an optimum manner prior to replacing existing facilities, revamping them or adopting new technology to provide cost effective solutions.
„« Review process-related capital and operating budgets taking into account past and present performance of the plants and processes and new technological developments. To enhance reliability, availability and performance of plants and processes.
„« Utilise process engineering simulation models and other software packages, computer tools to ensure that optimum performance is achieved.
„« Mentor of fresh National graduate engineers.

CHIYODA CORPORATION JAPAN
PROCESS ENGINEER- PROJECTS
Jul 2006 - Dec 2006
Job Profile:
As a member of the Project engineering team
„« Involved in all the activities of HAZOP study of the LNG project such as Node identification, marking on P&ID and listing of Nodes. Take part in Hazop Sessions, preparation of Hazop report, discipline wise listing of open action items. Co-ordinate with discipline lead engineers to close out open action items, communicate the close out comments to the client, finalise and publish HAZOP report with Close out report.
„« Prepared report for submission to client for compliance of P&IDs of LNG plant to SHELL's isolation and maintainability philosophy. Verification done on equipment and system basis for confirming to isolation, provision of vents and drains, provision for connection of utility streams for inertisation.
„« Verified list of Process and Utility header interconnections for correctness as per stream connection number, line size and material specification.
„« Co-ordination with site field engineering team for preparation of equipment list as per empty weight for erection schedules and crane availability.
„« Prepared preservation checklist for Lines, Equipments and skids as per standard norms and vendor requirement.

INDIAN PETROCHEMICAL CORPORATION LTD., MAHARASHTRA, INDIA
POLYETHYLENE - DEPUTY MANAGER
Sep 1995 - Jun 2006
Job Profile:

„« Perform thermal and material balance to benchmark the plant performance.

„« Tuning of various process parameters to conduct different trials of catalysts, additives etc and evaluation of the same considering overall impact.

„« Understanding the philosophy of process technology for capacity expansion.

„« Critical analysis of Process licensor's recommendation with a view of future operations as well as past experience of operation.

„« Responsible for identification of process control requirement, trouble shooting and rectification of existing CL program to accommodate new process requirements.

„« As a member of the Butene-1 revamp team
I have done P&ID review and HAZOP study, Involved in pre-commissioning and commissioning activities and was responsible for stabilization and test run of the plant.

„« As a member of the TIE-IN group of the project team in the LLDPE/HDPE expansion project with INNOVENE Technology
I have done finalization of retrofitting tie-in points, checking of actual hook ups, preparation of check list, as-built checking of the plant, preparation of checklist for mechanical completion of plant and identification of various loops for pre-commissioning activity like line purging, sheet blasting, line flushing etc.

„« Manage operation with key focus on achieving pre-determined production targets with prime grade product quality.

„« Maintaining safety in all aspects of plant operation and maintenance jobs and create a culture of safe practices across all functional groups.

„« Planning and coordinating maintenance requirements of annual turnarounds including statutory jobs.

„« Subordinate development through training and delegation of responsibility with proper guidance.

„« I was a contributing member of the Six Sigma team in the project for improving the ON-Grade production during Grade changes.

„« Recognised by the management through excellent performance award.

NEYVELI LIGNITE CORPORATION LTD
ENGINEER TRAINEE
Apr 1995 - Sep 1995
Job Profile:

„« On the job training, safety orientation, Organisational skills development.

„« Worked as trainee engineer reporting to production manager in the Coal Briquetting plant which is a preparation unit for the coal gasification plant.

„« Experience in operation and principles of belt conveyors, bucket conveyors, chain conveyors, hammer mills, large open tray sieves, rotary steam jacketed tubular driers, electrostatic precipitators.

„« Gained experience in maintenance planning and co-ordination with external and internal customers.

TANFAC INDUSTRIES LIMITED, TAMILNADU, INDIA
GRADUATE ENGINEER TRAINEE
Jan 1995 ¡V Apr 1995
Job Profile:

„« Shift Engineer for CRYOLITE (Sodium Aluminium Flouride) manufacturing unit.

„« Experience in preparation of batch sheets, addition of chemicals in batch reactors. Operation of vacuum driers, oil fired rotary kiln driers and bag filters.

„« Gained experience in maintaining process parameters to ensure quality.

„« Monitoring of bagging and loading section with inventory management.

„« Manpower management.

„« Ensure safety in all aspects of operation.

Education
UG: B.Tech/B.E. (Chemical) from NIT/REC, Tiruchirappalli, India.

Certification: Certified Energy Manager, Certified Energy Auditor.

Training
Discipline Topic Trained by

Control system US/AMC Implementation Tata Honeywell, Pune

Energy Pinch Technology Developers of Aspen PINCH

Process safety Hazop Workshop Tata AIG

Process safety Risk Assessment - Level 2 Faculty from Exxon Mobil

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 2726)

Go to Search Parameters...

Brief Description

Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan

Operations Supervisor - Overseas experience

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

Environmental Consutlant/ Management - International Experience

I'm working in Pakistan PTA Plant (ICI). I have one year working experience.

Field Project Manager (Crosswell Seismic). Highly motivated, enthusiastic Borehole Seismic Project Manager with 11 years of wireline and seismic experience. Successfully managed numerous projects in diverse locations around the world.

I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial

Chemical/Process/Project/Field Engineer/Chemical/Process/Project/Field Engineer

HSE Specialist

Operations, coordinations, MIS, Advanced Excel, Customer service

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

Senior Instrumentation Specialist / Designer

Incharge for operation and maintenace of Diesel Generators and Aux. boilers. And also responsible for inventory and requistion management for these eqpts. In total i have 3 years of sailing exp. Presently sailed as 3rd engr. Recommended for promotion by senior engineers.

Working as Commissioning/project engineer in Kim Heng Shipbuilding & Engineering

been in oil field for 2 years, been in some type of managment for over 7 years

Project Planning, Scheduling and Forecasting, Progress measurement and reporting, Man-hour tracking and control, Project Control, Project and Maintenance Management/Planning/Scheduling. HND Computer Science, EMsc Project Management

SIR I am mechanical engineer,if my qualifation are suitable for any job please contact me.i can give good results and new method for doing any work.

Diverse experience in the fields of failure analyses, corrosion of steels, protective coatings and paint film systems, welding and materials selection, complemented by a strong background in mechanical engineering. Excellent communication and organization skills, dedicated to quality and accuracy wi

CCNA, CCVP ,C, C++, HTML, DHTML, ASP, JavaScript 1.2, Java 1-2, CGI-PERL, MS Office, MS Exchange Server, windows, Windows NT 4.0, windows 2000,2003,SQL Server, MS Access

Geologist

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

MSc Engineerign Geology, experienced in geotechnical engineering designs and SI

Senior Systems Analyst experienced in managing cross-functional projects with a high focus on customer satisfaction seeking a challenging position as a Project Engineer/ Manufacturing/ General Engineer.

As a compboss experiouns 5 years in pipeline contracting company

Strong communication and leadership attributes. Have led more than 20 commissioning/start-ups on chemicals plants in numerous countries.

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

Materials and logistics supervisor and controller.Warehouse and Inventory supervisor.

Rotating Equipment Engineer, Maintenance Engineer, Vibration Engineer, Reliability Engineer, Mechanical Engineer

Logistics, Technology, Transport and Management Professional

Over 10 years in the environmental industries with planning skills, I currently manage over 20 staff involved in a variety of projects focussing on land management, sustainable land use projects, visitor information, media liaison and implementation of national objectives for federal government.

6++ years experiences of Yokogawa & Honeywell DCS

Highly motivated Ph.D. Chemist with a broad range of skills looking for a position that involves challenge and innovation.

A seasoned, highly organized construction professional with over 39 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in all major industries worldwide

Unlicensed Engineer, Diesel Mechanic

Instrumentation supervisor - QP refinaries, Qatar

QA/QC Project Execution Engineer With more than 3 yrs of experience in construction industries

16 years experience as a Safety professional and Paramedic, NREMT-P, Texas EMT-P, Colorado EMT-P, ACLS, ITLS, PEPP, CPR

Any related to GIS

Project Manager, Business Systems Analyst, and Information Developer

Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering

I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

My wish would be to integrate a team of safety, contractor or in the respective specialty . My family circumstances having found stability durable. The formation that I received in this field pushes me to gain this environment in which I smell myself much more at ease. Indeed, the hostile sec

Good at learning and implementing, target oriented, flexible and can work under any conditions

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

Fitter Including Machining and Diesel Fitting

Supply Chain and Customer Service Manager - Looking for relocation in Australia or Africa.

A globally-certified procurement professional with extensive Asia-Pacific experience

LPG/LNG Operations - Bottling & Bulk Supply & Distribution, Project Management, Primavera & MS-Projects

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out