Resume - I am an experienced engineer with productive employment and education in the fie...

Misco Jobs

Resume #4451

CONTACT INFORMATION:
View contact information...

PROFESSIONAL PROFILE
Process and Commissioning Engineer with experience in:
* Managed process and plant operations for upstream oil facilities, gas treatment and processing, heavy petrochemical and refinery,fertilizers and utilities plants
* Hands-on experience with the Process plant simulators (HYSYS, PROII, ChemCad, Design II) and pipe-network simulators(PipeSim, PipePhase)
* Commissioning, Start-up, Operation and maintenance of large utility and gas processing systems (water and waste water treatment, air separations, steam producing and distribution, gas treatment, processing and sweetening systems)
* Plants revamping, Field Engineering, Material Requisition and feasibility and bottleneck analysis
* Engineering supervision of process improvements, troubleshooting, optimization and design enhancements
* Technical interfaced between management, constructor and vendors
* Dealing with routine monitoring of the technical aspects of plant operations: process pre-commissioning, commissioning, start-up and normal running
* Experience with state of the art control equipment (DCS, Honeywell TDC, PLC)
* Training of technical staff and operating personnel

PROFESIONAL EXPERIENCE
AGOCO Lybia – Operation Department May.2003 – present
Senior Process Engineer
* Report to the Operation General Manager for all operations activities with concentration on process optimization and economics to achieve highest safety standards and best efficiency at reasonable cost.
* Propose process improvements, troubleshooting, optimization and design enhancements and bottleneck studies for company upstream oil and gas field on-shore facilities;
* Prepare detailed mass and energy balances; perform piping system hydraulics calculations using PipePhase and PipeSim simulators; also involve in relief and flare systems design evaluations and enhancements.
* Run process simulations using HySys 3.1 and ChemCad 5.2 so that process performance design checks can be completed and to evaluate whether off the shelf equipment can be incorporated into the process flow scheme.
* Assist Field Superintendent in development of work scope and execution of plant turnarounds including: develop procedures for work while down, ensure proper isolation of equipment prior to maintenance activities, maintain timelines and be flexible and creative as problems occur.

Karachaganak Process Complex, Aksai KAZAKHSTAN Nov.2002 - May.2003
Process Engineer
* Involved in many Upstream Oil and Gas projects in this capacity work independently and handle process activities on projects, like going for site visit, handling Client comments, client co-ordination, participation preparing process study reports, preparing process drawings etc.
* Performed performance process simulations using HYSYS for gas plant (Amine regeneration, Glycol units and Sale Gas dew point checking); Prepare of heat and mass balances, process flow diagrams, P&ID's, pipeline calculations and equipment sizing (HySys, PipeSim, ChemCad simulators)
* Also, involved on the commissioning and start-up operations for Process water treatment, Condensate stabilisation, Dew Point Control, Fuel gas sweetening and dehydration and amine regeneration
* Participated in the Start Valve by Valve Write-up of Commissioning and Start-up Procedures; Coordinate Hydro and Pneumatic Field Tests;
* Supervision activities in Line and Equipment Chemical Cleaning and the Punch List; Prepare System Hand Over/Acceptance List;
* Participate to plant start-up; Involve in plant day to day operations.

Shurtan Gas Chemical Complex Project, Shurtan, UZBEKISTAN Aug. 2000 – Oct.2002
Commissioning/Startup and Operation Specialist for Utilities Plant
* As a commissioning specialist, I was involved in elaboration of procedures, and supervision for precommissioning works made by subcontractors for following areas Utilities and Off-Sites, for following activities:
- washing, blowing of the units circuits
- chemical washing of compressors circuits and equipment's
- equipment inspection: vessels, columns and tanks
- instrument loops checking and testing of PLC, ESD,DCS logic's for compressors, dryers system, boilers furnaces and other equipment's (pumps, fans etc);
* I have participated effectively at start-up and normal operation, operating on panel, DCS Honeywell TDC 3000
* Responsible for the on-shift operations and troubleshooting of the Utilities Plant
* Managed and controlled the water treatment plant;
* Monitoring of clarifier operations, water filtration and chemical addition systems.
* Operating Atmospheric towers, vacuum distillation towers, and flash recovery tower, steam generators, natural gas heaters, exchangers, vapor recovery systems, chillers, waste water treatment, scrubbers, and pumps

ENDO FOOD TECHNOLOGIES INC. TORONTO Jun.1997 - Mar.1999
Plant Supervisor
* Reviewed all process parameters and finalized the operating procedures for the automated food grade production facility
* Initiate, following up, and interpreting results of lab evaluations used to improve product performance, develop new formulations, prepared statistical process reports

CANADA COLORS and CHEMICALS LTD. TORONTO Oct.1996 – Mar.1997
Quality Control Advisor
* Prepare technical product documentation as per ISO 9002 requirements
* Assess company's product analysis methods against ASTM / ISO test methods
* Operate lab equipment (GC, titrators) for wet product analysis as per ASTM

CHIYODA CORPOPATION (Japan) Mar.1994 May.1996
ELEME PETROCHEMICAL COMPLEX–SHELL, Nigeria, Utilities Section
Plant Shift Supervisor / Process Engineer
Responsible for the following utility systems:
Water Treatment and Supply System for steam generation boilers
Recovery Water Cooling System (10 draft cooling towers and chemical processing)
Nitrogen Generation System (liquid air separations), Sludge Incineration Unit
Waste Water Treatment, Instrument Air, Fuel Gas, and Flare Systems
* Supervised two technical teams during the commissioning of the above systems
* Trained and then supervised the operators of the systems under responsibility
* Executed back up operations and finalized the Operation Procedures for the Commissioning Manager approval
* Prepared process reports and production sheets for the systems during operation
* Performed simulation of processes using DCS software on Yokogawa PLC system

BRAZI PETROCHEMICAL COMPANY - Romania 1985 1994
Petroleum refinery and petrochemical production complex (6M Tons/y crude)

Petrochemical Division Dimethyl Terephtalate Plant Oct.1991 - Mar.1994
Plant Superintendent / Revamp Engineer
* Responsible for 4 foremen and 40 operators on a DMT throughput of 150 tons/d
* Developed the issue for revamp stage the Process and Utility P&ID's, performed hydraulic calculations, PSV and PSE mechanical sizing and line designation Tables
* Prepared statistical reports and maintenance scheduling for Plant Manager approval
* Leader of the Operation Review Team during the implementation of these plant improvements
* Responsible for the training programs of technical staff and operators

Petrochemical Division Phenol and Acetone Plant Oct.1987 – Oct.1991
Production Engineer/Process Engineer
* Responsible for the plant operation and the monitoring of solid, liquid and gaseous waste discharges (100 tons/d plant output)
* Carried out the design upgrading plant activities
* Coordinated production activities related to the replacement of an analog control system with a digital one (Honeywell TDC 2000)
* Involved in identifying the relief loads and bottlenecks, PSV's size checking for new loads, sizing discharge laterals and checking plant relief header for the revised loads.
* Lines sizing and piping class selection. Produced the line designation tables

Petrochemical Division Technical and Marketing Department Dec.1985 – Oct.1987
Process / Application Engineer
* Responsible for the technical review of projects during the implementation of major plant/process modifications
* Produced process data sheets for equipment, vendor packages, control valves and pressure relief valves.
* Coordinated with the other involved disciplines and performed technical bid evaluation for the equipment.
* Field data obtaining and evaluations.
* Provided technical support AV presentations to a team of sale people marketing pilot size petrochemical plants rendered obsolete by the start up of large scale units

ISALNITA CHEMICAL FERTILIZER COMPANY 1982 1985
Process Engineer - N.P.K. Complex Fertilizer Manufacturing Plant
* Monitor the process (control room and production area) and maintained inventory status for the complex (150 tons/d of various fertilizers)
* Produce the preliminary design (process flow diagram and material and energy balance) of a phosphoric rock grinding plant

EDUCATION
* Master degree in Chemical Engineering. Major: Technology of organic substances University of Timisoara, Romania
* Analyst programmer and DB management training course 1991-1992,
National Institute for IT, Bucharest Romania

INDUSTRIAL TRAINING
D.C.S. Training on YOKOGAWA 100 Accident Control for Supervisors
Analytic Troubleshooting Flammable Liquids Firefighting
Permit Systems and Gas Testing Haz/Op Training

* References supplied upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 2461)

Go to Search Parameters...

Brief Description

Sixteen (16) year experience in Venezuelan and international Oil Industry at Pre-commissioning, Commissioning & Operations of units, involving following areas: Oil, Gas and Multi-product Pipelines. Production: Free water knock out, Thermomecanicals treaters, Gas Heaters, Gas Lifting, Natural flow w

Over 20 years experience in LNG and Oil Refinery /Panel/Plant-Operator/Supervisor

25 years experience in LNG/Refinery plant/panel operations/commissioning

I have 15 years Lab experience such as 6 years of LNG plants, 7 years of Refineries and 3 years of Aromatic and PTA plant Labs experience with 5 new labs commissioned experience. I have a good knowledge regarding the dosing of corrosion inhibitor at wells side. I can conduct Oil & Gas analysis.

Field Acquisition QC. Over 20 Years experience in Land Seismic. 3D Design by OMNI and MESA. Field processing of 2D/3D land seismic data (MicroMax,ProMax, VISTA, APEX) . Creating and verification of SPS files. Static correction.

Working as In charge OIL/GAS LABORATORY TESTING OF LPG/C2C3/NAPHTHA/OIL ETC. PROCUREMENT/CALIBRATION/MAINTENANCE OF EQUIPMENTS

Ensure all plant/equipment/tools/materials are fit for use, and comply with the HS&E Management Plan, with regard to certification, permits and colour codes.

A four your degree holder with one year Shift Supervisor Process (SSP) and six years as a Control Room Operator on Shell Bonga offshore FPSO.Have various oil and gas experience offshore, swamp and land facilities.

Over 33 years of working experience within India and abroad as Electrical supervisor, Senior Electrical Foreman, Electrical Engineer Commissioning Engineer, Electrical specialist and Specialist Senior Consultant.

Seismic field processing on Promax for 10 years and actually short experience on CGG software

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

•Worked as commissioning Engineer and Project Liaison Manager in four major Petrochemicals (Polymer) projects, worth $30 Million, $50 Million, $20 Millions and again $20 Millions.

EPC Attorney with Land Development and Regulatory Experience

Bachelor of Commerce, Budgetary Control, Inventory Control, Planning & Analization of materials, setting up new storage system, Vendor development, Administration skills.

An experienced superintendent with the necessary skills required for the safe commissioning and operation of oil and gas treatment plant

20 years Experience in the Acquisition of Oil and Gas Leases, Title Examination, Title Curative and Management of Small, Medium or Large Scale Projects within the Rocky Mountain Region

B.Sc. in Geology, M. Sc. Geophysics Working as Co-coordinator & D. Geophysical Manager

HSE Advisor with 20+ years E & P Experience

30 years of professional experience. Having experience in seismic data acquisition and processing including velocity analysis, de-convolution,wavelet processing, migration velocity smoothing, VSP, Well logs, strong knowledge in computers and Seismic Unix processing. M. Sc (Exploration Geophysics).

I am a mathematics post graduate alongwith apprentice training in refiney technology. I have choosen refinery tech. as career. Approximately 17 years in Petroleum and Petrochemical industry working as a Plant Manager/superintendent/shift controller/ Supervisor / Operator including 13 year on ovseas.

I am an experienced engineer with productive employment and education in the field of processing, supervision, commissioning, start-up operations, production and design.

Master Mariner, Offshore FPSO Marine Supervisor

Served over 20 years in the armed forces with 14 years as a supervisor.

Petrochemical, Refinery, Oil and Gas, Processing, Oil movement and blending, Operations, Utilities, Off Sites, Construction, Commissioning, Construction, Start-up. Expatriate Supervisory and Managerial.

Pilot, mooringmaster, marine officer, marine superintendent, port captain

Having work skill in Fire Safety Engineering, Qualified in Fire & Safety

Experienced Cased Hole, Open Hole and Production Logging.

I am a chemical engineer working in Qatar Petroleum for past 10 years as a station in charge in Oil & Gas station and 8 years experience in petrochemical industry

Experienced drilling consultant, superintendent, foreman and rig manager.

Petroleum Technician in Drilling and Well Conditioning with expirience 23 years, in the oil industries ( Storage tanks farm and Terminal facilities).

QUALIFICATION Inorganic Chemical Process Engineering PROCESS UNIT OPERATED -Ammonia -Ammonium nitrate -Nitric acid -N.P.K. Plant -Melamine -Utilities -Boilers (gas fired) -Power plant (gas fired) -Gas turbines -Air separation -Steam turbines

I am a Well Service Supervisor with BSc in Petrochemical Science and Technology. I have 15 years specialized experience in supervision and execution of various well operations including: cementing, acidzing and matrix stimulation; fracturing; coil tubing; nitrogen handling and pumping; well kill op

Drilling Supervisor, Superintendent, Rig Manager, Operations Manager

22 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Team Oriented Land Drilling, Production and Management Professional

Oilfield Drilling or Completion Qualifications, Consultant or Foreman.

have over 14 years and 10 months experience in Refinery, Petrochemical and fertilizer fields in the area of Proces, operations, Pre commissioning and commissioning. I worked as Junior Manager –Process for 3 years in fertilizer field, as Senior Engineer and Shift engineer in hydrogen unit for 5 years

Mud Engineer

Energetic, good in communication and possess leadership quality. I am a Chemistry graduate with Masters degree in management. I have 12 plus years experience in oil and gas.

I am a petroleum engr, US citizen, with 20+ years experience as Drilling Supervisor, on & offshore, in drlg, completion, workover, testing, in the US and many other countries. Familiar with deviated drlg, horizontal, drlg underbalance, H2S, wkg in remote locs. Fluent English & Spanish.

Logistics Coordinator, Base Operations Manager, Barge Engineer, Chief Pilot

ROV pilot / team leader - subsea shift supervisor - cable officer - DP officer - Field engineer - jumpers installation - mud matts concret protective mattresses -

As a Wellsite Geologist with over 14 years of experience I have worked on various Oil/Gas and Coal Bed Methane exploration & development projects (400+ wells) in Canada as well as International work in the country of Qatar.

Process Technician/Chief Operator: 20+ years experience in the check out, commissioning, startup, and routine operation of the following - Oil Refinery process units, Petrochemical Plants, Gas Processing plants and Power Generation plants.

Well control, safe, enviromental, health, horizontal drilling, coiled tubing completion, stimulation, multi mud programs

Free! My prospect right now is to use my combined experiences as LWD engineer and Senior directional driling engineer to manage people and equipments for field operations, main assets of the growing oil and gas business in a safe manner.

4 year Bachelor of engineering degree. 21 years total experience. Familiar with drilling/workover /fishing operations and tools. Past three years working as Company man/Drilling supervisor.

Familiar with: -Separation, stabilisation,-Gas compression,- dehydration,-Gas injection.-Storage and shipping-Heater, Gas turbines- Water treatement-DCS-Propane refrigeration loop.

Extensive experience in the operations of oil & gas, refinery and hydrocarbon process

Over 19 years experience of Executive Secretarial, Administrative and Managerial services of very high professional level, in Saudi Arabia, Sultanate of Oman and India

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out