Resume - Process Assistant Shift Supervisor, Maintenance Coordinator, Turnaround Coordina...

Misco Jobs

Resume #44982

CONTACT INFORMATION:
View contact information...

EMPLOYMENT:

PETRON CORPORATION - Refining Division
Alangan, Limay, Bataan
Philippines 2103
February 16, 2006 - present
Process Assistant Shift Supervisor - Operations Department
January 1996 - February 2006
Process Control Room Operator Level II - Operations Department
July 1992 - January 1996
Process Area Field Operator Level II - Operations Department

ASSIGNED UNITS/ CAPACITY:

1. Atmospheric Pipestill #1, APS#1 - 8,745 klpd (55 MBSD)
2. Atmospheric Pipestill #3, APS#3 - 3,975 klpd (25 MBSD)
3. Vacuum Pipestill, VPS - 5,088 klpd (32 MBSD)
4. Gas Oil Hydrofiner Unit, GOHF - 2,862 klpd (18 MBSD)
5. Gas Oil Desulfurizer Unit, GODU - 2,862 klpd (18 MBSD)
6. Kerosene Hydrosweetener Unit, KHS - 960 klpd (6 MBSD)
7. Solvents Plant - 960 klpd (6 MBSD)
8. Diethanolamine Facilities, DEA System
9. Hydrogen Recovery Facilities, HRF
10. Gas Oil Hydrofiner Treater, GOHT – 3,498 klpd (22 MBSD)

Process Assistant Shift Supervisor - Operations Department

PRIMARY FUNCTION:
Responsible to and advises and assists the Process Services Head on matters pertaining to the technical aspects of the overall refinery process operations, operating data analysis, environmental protection and pollution control, energy efficiency, safety operations, environmental impact and/or support additional requirements in terms of production, new product or enhanced product quality.

DUTIES AND RESPONSIBILITIES:
1. Reviews day-to-day process operations to spot and correct potential problems or deviations from operating plans.
2. Compiles and analyses daily operating data and prepares routine reports.
3. Maintains and updates refinery data on equipment and processing set-up.
4. Constantly reviews product qualities to ensure adherence to standard manufacturing specifications without sacrificing blending optimization. Renders assistance on product blending problems.
5. Provide technical assistance in trouble-shooting refinery operating difficulties.
6. Conducts technical studies, prepares process design and recommends measures to reduce costs and improve operations, safety, energy efficiency, product quality, environmental protection and pollution control.
7. Plans, follow-up and evaluates process unit test runs and makes recommendations to reduce costs and improve operations, safety, energy efficiency, environmental protection and pollution control and product quality.
8. Conducts surveys/ studies and makes necessary recommendations to improve yield and product quality, oil loss, cost reduction, energy conservation, environmental protection and pollution control posture of the refinery.
9. Other activities:

a) Conducts studies to guide Operations Department in optimizing product blending.
b) Conducts special studies to evaluate economic incentives in implementing major changes in refinery operating plans.
c) Follow-up all process unit turnaround schedules and work items.
d) Prepares material for technical committee meetings and activities, operating manuals, safety reports and other technical papers.
e) Attends pertinent refinery meetings.
f) Participates in various committee dealing with refinery operations, safety sports, social and public relations.
g) Trains other refinery and affiliate company personnel.
h) Attends company management and technical courses as well as non-company professional or technical seminars as advantageous.
i) Keeps abreast with developments in his field, selecting those that may have company application.
j) Process Control Room Operator Level II – Operations Department
Process Area Field Operator Level II - Operations Department

PRIMARY FUNCTION:
In charge of safe and efficient operation of all equipment and facilities associated with processing crude oil into various petroleum products. Specifically assign to do field works and/or workstation operation in any of the major process unit covering Atmospheric Pipestill #1 and #3, Gas Oil Hydrofiner Unit, Gas Oil Desulfurizer Unit, Vacuum Pipestill Unit, Hydrogen Recovery Facilities, Kerosene Hydrosweetener Unit, and Solvent Plant.

DUTIES AND RESPONSIBILITIES:
1. Work according to publish shift schedule or assigned tasks.
2. Reports his presence for work his Shift Supervisor before the start of the shift.
3. Advises his Shift Supervisor or his absence, the Shift Superintendent or Process Assistant Manager in adequate time before the start of the shift if he is unable to attend to work.
4. At the start of the shift, a technician checks with his Supervisor on-duty if he is a member of the firefighting team and assumes the duties of a firefighter for the shift accordingly. As a firefighter, it will be his duty to respond in firefighting activities should there be a fire in any part of the refinery.
5. Stays on the job until properly relieved and does not leave the general area of responsibility or work without the permission of the Shift Supervisor or Shift Superintendent on-duty.
6. Properly relieves the outgoing Process Technician on the job and assumes the duties thereof. At the time of changeover, he obtains all relevant information for his area or section and transmits same upon being relieved at the end of the shift.
7. Familiarizes himself at the beginning of his shift with operating requirements, product specifications/characteristics, etc. by checking or referring to the Process Technician he is relieving the order book, logbook, runsheets, computer printouts, computer data trend, alarm summary, etc.
8. As Process Technician, he maybe assigned as Fieldman or Control man in any of the Process Units in the Process Block I Area.
9. Checks and inspects that the work station he is operating is in order and that it is for automatic back up on its assigned back up work station. Knows manual switching to back up workstation if automatic switching fails. Ensures adequate supplies of consumables for SCC/DCS equipment and reports to Shift Supervisor the requisition material needed.
10. Checks and inspects all equipment in the field as well as the Control Room as early as possible in the shift and as often as possible during the shift.
11. Corrects faulty operations or line-up of equipment and immediately reports to the Shift Supervisor any defective equipment for repairs and maintenance.
12. Keeps turbines, pumps, compressors, gearbox, valves, etc. properly lubricated. Checks and inspects lubrication twice per shift or more often and reports unusual observation if any to the Shift Supervisor.
13. Checks frequently all heaters and furnaces in his assigned unit for oil/gas steam leaks, tube flame impingement, excess air, coke-up burners, hot spots, flue gas leaks, etc. and adjusts when necessary. Sootblows convections and preheater (where sootblower are provided) once per day or more often as required. Ensures adequate spare of clean burners for immediate use.
14. Draws samples from routine laboratory test or for special tests as required. Undertakes sample laboratory tests (local test) as required.
15. Start-up, maintains, operates or shut down equipment per Standard Operating Procedures, sees to it that such operations are carried out efficiently and safely, and in no way endanger personnel or equipment either by operating beyond limits of flow, temperature, or pressure by uninformed or unclear instructions.
16. Adjust equipment to change conditions of temperature, pressure, or flow as required or directed.
17. Prepares equipment, lines or facilities for safe maintenance and turnaround according to established procedures.
18. Conserves petroleum products, lubricating oils, chemicals and utilities.
19. Ensures right quality/amount of inventory of lube oils, chemicals and catalyst. Advises his Shift Supervisor of the need to replenish stock to maintain proper inventory.
20. Switches pumps, compressors, etc. to spares as scheduled. Ensures that all spare equipment are operable and available for immediate use.
21. Knows the location of the firefighting and safety equipment in his area, and ensures that the same are in good condition and available for immediate use in case of emergency.
22. Takes reading of operating conditions that are not hooked-up in SCC or DCS.
23. Thoroughly familiarizes himself with the proper operations of all equipment in the Process Area including safety and new fire protection facilities installed in the Process Control Room.
24. Keeps the Process Control House and Process Unit clean and free of unsafe conditions. Observe proper housekeeping in all areas of work.
25. Keeps watch on local conditions where instruments in the DCS may not be indicating or recording properly. Performs level comparison as scheduled or as required/directed. Advises his Shift Supervisor of abnormalities observe so that defect may be corrected.
26. Keep watch on drums, knockout pots, etc. for presence of unusual water which could upset unit operation. Advises his Shift Supervisor so that corrective actions and/or maintenance work can be instituted immediately.
27. Reports any oil, chemicals, water or steam leaks and defective steam traps to his Process Shift Supervisor so that corrective actions and/or maintenance work can be instituted immediately.
28. Familiarize himself in the various relieving devices in the unit and be completely aware of the emergency procedures in his area of responsibility.
29. Coordinates with his Process Shift Supervisor and with other sections of the refinery and informs them of any changes in the units that may affect their areas of responsibility.
30. Keeps the Process Shift Supervisor well informed on all development in the unit operation.
31. Investigates immediately sources of gas release to flare and hydrocarbon liquid to condensable blow down and takes immediate corrective action.
32. Performs any other duties that are work related as directed by his Shift Supervisor, Shift Superintendent or Process Assistant Manager Records important events that occur in his unit by printing a hard copy of instruments indications or trends before, during and after the event.

TRAININGS/SEMINARS:
Year Dates Attended Training Program
2006 02/10/06 Firefighting Refresher Training
06/15-16/06 Technical Writing for Business
06/13-14/06 Leader by Choice
2005 02/16/05 GOHT-3 Regeneration Procedures
04/12/05 Safety Orientation Training
06/20/05 Power Distribution/ Utilities
2004 01/08/04 Firefighting Refresher Training
02/26/04 APS-1 Modification Training
03/29-30/04 Safety Orientation Training
04/02/04 LIMS On-Site Training
09/06-08/04 Centum CS3000-R3 Training
2003 03/04/03 Firefighting Refresher Training
04/15-16/03 Basic Safety Training
04/22-23/03 Achieving Better Results Everyday Seminar
05/22/03 Overhead Corrosion Control & Desalter Operation
06/17-18/03 Labor-Management Relations Seminar
10/30/03 Performance Management System Seminar
2002 01/07/02 Liquid Caustic Handling Orientation
01/31/02 Hazard Identification Workshop
02/02/02 GODU Presulfiding and S/U Procedures
02/14/02 VPS Chemical Cleaning, H-105 Decoking
03/08/02 VPS S/U Review
04/12/02 APS #1 S/U Procedure Refresher
05/29/02 SCBA Orientation/Training
10/14/02 Total Plant Shutdown Orientation
10/05/02 ISO Procedures Orientation
11/25-26/02 Personal Effectiveness Training
2001 03/20/01 Hazard identification Training
04/20/01 GODU S/D, S/U & Regeneration Procedures
10/09/01 Hydrogen Recovery Facilities Training
10/15/01 APS #1 / GODU Refresher Training
2000 04/10/00 Review of GOHF S/D, S/U and Regeneration
10/09/00 GODU S/D, S/U & Regeneration Procedures
1999 05/26/99 Plant Integration - Water Treating and BFW System
08/26/99 KHS Modification–Commissioning Procedure
09/29/99 KHS Normal/Emergency Shutdown

1998 06/10/98 ISO Awareness-Refresher
09/08/98 RMPCT-Advanced Process Control
1997 07/23/97 Metrication
08/07/97 Hazard Identification Workshop
08/12/97 Metrication
11/06/97 Centum-CS Training
12/19/97 Refresher Course on S/U & S/D of APS-1/VPS
1996 01/11-12/96 Quality Management System
01/31/96 ISO-9000 Awareness
06/19/96 Orientation on Performance Appraisal
11/19-21/96 Quality Improvement Tools and Techniques
1995 01/09/95 C-2802 Pre-Commissioning
01/18/95 VPS Shutdown Procedure
03/06/95 Gas Oil Desulfurizing Unit
03/07/95 Hydrogen Recovery Facilities
04/04/95 KT-Analytic Troubleshooting
05/16/95 Advanced Process Control
11/24/95 Fire Control Training
1994 03/10/94 Substation/MCC
08/22/94 Basic Instrumentation
08/26/94 Tower Operation
10/11/94 F-101 Operation
10/27/94 APS-1 Shutdown Procedure
1992 05/31/92 Pumps
05/14/92 Compressors
05/15/92 Steam Turbines
05/17/92 Heat Transfer
11/20/92 Hydraulics

EDUCATION:
COLLEGE UNIVERSITY OF SAN CARLOS
Cebu City
1986 – 1991
BS Electronics and Communications Engineering

SECONDARY UNIVERSITY OF SAINT LA SALLE
Bacolod City, Negros Occidental
1981 – 1985

PRIMARY UNIVERSITY OF SAINT LA SALLE
Bacolod City, Negros Occidental
1972 – 1980

EXTRA-CURRICULAR ACTIVITIES:
Institute of Electronics and Communication Engineers - Member

SPECIAL SKILLS:
Usage of Computer Software - Microsoft Office (Word, Excel, Power Point)
Performs Turnaround-Maintenance Coordinator - Year 2004-2005
Performs Acting Shift Supervisor - Year 2005-2006

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 2722)

Go to Search Parameters...

Brief Description

College Study with 13 years oil & gas Logistics Experience

Certified Lead Auditor in ISO9001 and coversant with 14001, Trainer of ISO QMS, Plastic Technologist and expert in Quality Control of entire production, In-charge of resolving customer complaints and overall expertise in devoloping new furniture and engineering plastic products

Chemical Engineer, Project Manager, Process Operator in oil and gas

I have oilwell service experience with wireline, swabb have ing, fishing and rental tools. I24 years experience with manufacturing and machine work on oilfield equipment. I am an hands on hard working man with good hand eye coordination that likes the challange of working on oilwells.

I have over 19 years of experience in Procurement area including over 3 years of reservoir management and production management for oil company. I possess good knowledge in Purchase Order Processing, Inventory, Quality Assurance, Expeditor, Production (both Surface and Sub-surface).

A successful, experienced and qualified Commissioning and Production Operations Start up Shutdown Coordinator and Start up Specialist with over 17 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Operational, process, construciton, commissioning jobs

I have more than 27 years of petrochemical experience in a very wide field, including Methane Reforming, Air Separartion, LNG Storage, Tank Farm and Despatch (pipe line, rail, road and ship), Process design and Utilities (water treatment). Also extensive construction and commissioning experience.

Consultant Night Drilling Supervisor / Drilling Supervisor. Available for immediate employment. Minimum $650 USD per day (more for hardship/dangerous locations).

I have experience with several major international oil companies. I also have expertise in drilling, production, maintenance, construction, projects and operations. My experiences have been found at a local and international level.

Experienced in Management, operations and administration at upper levels in business related to Marine Operations, Business Development, Contracts Matters, Private Business and Coordination of Marine Repair and Refurbishment projects.

PROFESSIONAL SUMMARY Over 20 years of proven expertise in direct oil and gas operations. An experienced trouble-shooter and problem solver.

Extensive experience in the Gulf Coast and Gulf of Mexico in all phases of drilling, completion, remedial & production operations.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

Managed and implemented product, equipment, and process design/modifications in manufacturing. Developed and managed concurrent design engineering initiatives, proto-typing, product development/validation (NPI), manufacturability, preparation of specifications and operational documents.

Public Affairs, Public Relations, Training, Cross Cultural emphasis. Managerial, Technical, Supervisor, Trouble-shooting and Training expertise in Oil/Gas production operations, one offshore. Proficient Macintosh/IBM PC comp. International work. Cross-cultural training, work and personal exp.

B.Sc. Chemistry degree and having 9 years experience in petrochemicals and refinery in process department

Free! Core Competencies: Project Management, Operations, Reliability & Integrity Improvement Process(ORIP), Drilling & Production Startups, Well & Pipeline Operations, Team Leadership & Collaboration, Process Improvements, Operational Performance Benchmarking, Oil & Gas Production Optimization, Drill Stem

Plant operator

Well test supervisor / engineer with Reservoir experience

I am having 17 years of experience in Pre commissioning/Commissioning /Start up and Operation of different Oil/Gas/Refinery/petrochemical/ plants/units/off sites/Utilities

I have been working at Mudlogging Operation more than 15 years. And have responsibility as:

Skills and Qualifications: 20+ years in the Oil & Gas Industry, Presently working as Operations Supt. in Kuwait, my goal is to move out of the Drilling Company side and into Production

To obtain a job in the in the Oil and Gas Industry that will challenge my abilities.

Logistics Coordinator - Offshore/Onshore, Base Operations Mgr. [2009]

I have over 25 years of experience in the petroleum industry, primarily focused in drilling operations and engineering. My diversity includes US domestic and international experience offshore and onshore. I am seeking any challenging opportunities to further my career.

Over 12 years of rich and extensive experience in Oil and Gas, Refinery and Petrochemical and currently serving at PETROFAC INT LTD. Kuwait in KUWAIT OIL COMPANY.

Drilling consultant with 15 years experience on land rigs.

I am an Engineering graduate with 13 years of operational as well as commissioning experience.currently working with Qatar LNG plant

+13 yrs exp in Well site geologist , Data Engineer

cnc machinist, edm die sinker, wirecut operator

Over 14 years of experience in wide range of core refinery operations like pre-commissioning, commissioning, operating ,optimisation, handling start up and shut downs etc of various process plants like FCCU ,SRU, Naptha HDS, CRU ,CO Boilers/ Meroxes/ N2 /benzene/toluene/Hexane extraction plants

Last 5 years employed rig manager, unit drilling, 19 years in drilling,texas panhandle

Dedicated professional with a strong background in Wireline operations, planning and support. Currently working as a Petrophysics supporting Wireline field data acquisition, real time data monitoring and QC, processing and interpretation.

Good knowledge of international QHSE regulations and standards as well as oil and gas operations and business.

Global experience in Supply Chain, Logistics, and Project Management

More than 20 years practical experience in the field. Preference is given to a position in AFRICA, ASIA or MIDDLE-EAST.

I am a drilling supervisor with more than 19 years experience. Great experience with all drilling operations running casing/liner cementing fishing hole problems like losses & pipe string stuck. Great experience with different base mud also heavy weight mud over 17.7ppg and different bits & PDC

Instituted and formulated the safety and health program for the Company in accordance with the guidelines prescribed for this purpose

A competent professional with over 8 years of experience in Plant Operations, Erection & Commissioning & Process Improvement.

Currently seeking a challenging & demanding position that allows me to acquire new skills and use of my unique skills and experience. Do desire a work environment that fosters teamwork & encourages independent responsibilities and challenges.

I am a experience plant operator seeking for a full time position in a goal oriented company

Rich experience in LNG panel operations.

Chief QC Geophysicist, Seismic Data Processor, Up Hole Observer

operation and monitoring

I have wide industry experience in leadership, engineering, commissioning, maintenance and production mainly in the Oil and Gas industry. This experience includes both onshore and offshore production facilities including 7 years on an offshore production and drilling platform.

Throughout more than 18 years of Field/Head office experience in petroleum engineering.

I have 19 years experience in petrochemical plants since 1986, as a SENIOR PROCESS OPERATOR. Please read my cv and give me reply immediately. Present I am working the Andhra petrochemical plant as a senior process operator.

Multi-talented, goal driven manager/engineer with a broad base of technical know-how and skills that allows driving fast-track projects from all the angles required to ensure parallel development of safety, cost control, EPC, procedures and implementation.

Process Assistant Shift Supervisor, Maintenance Coordinator, Turnaround Coordinator, Process Control Room Operator

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out