Resume - Production supervisor/production operator/ on job trainer

Misco Jobs

Resume #45010

CONTACT INFORMATION:
View contact information...

JOB OBJECTIVE
Control Room Operator/Field Supervisor/On Job Trainer

TOTAL EXPERIENCE 18 Years India: 7 years Abroad: 11years

Permanent Address B104 Sanket, Ujjwal Nandadeepco-Op Hsg Society, Evershine Nagar, Off Link Road Malad West; Mumbai-400064. India.

EDUCATIONAL QUALIFICATION
N.C.T.V.T. Certificate Course on Plant operations, Ministry of Labour, Govt of India. (3 years - in Grade I)
TECHNICAL COURSES ATTENDED First Aid, H2S Permit, Work Permit (Hot/Cold) Course, Gas Testing, Confined Vessel Entry Course. Basic Sea Survival training. Shell Nigeria On Job Trainer Course.

OTHER INFORMATION
L.M.V. Indian Driving License available.International Driving License Available Working knowledge of Computers like MS office 97
Commissioning experience of FPSO.
Salary expected: Negotiable

WORK EXPERIENCE:
1. Production Operator / Production Field Supervisor (Well Head) Total Fina Elf Iran
June 2005 to Feb 2006
Responsibilities As Production Supervisors Are:
a) Involving in the commissioning of Oil, Gas and Water Injection wells b) Coordinating with the rig activities like SIMOPS (Simultaneous Operation), Preparing Daily reports and attending daily production meetings. Coordinating with SIMOPS activities of ESD1, PSLL & PSHH test on the wellheads. Coordinating with the commissioning of new wells including Flow line Hook-up, perforation, acidizing and clean-up. Training of Local Iranian well head operators.
c) Weekly testing of the safety systems of the well heads.

Sincejan 2005 To June 2005
Responsibilities As Production Operators Where:
a) Involved in the commissioning of the Oil and Gas facilities like Amine treatment Unit, Glycol Gas conditioning unit using TEG, Oil separation and Stabilization unit producing oil 80000 barrels /day and Gas Compression Unit.
b) Training of local Iranian operators.

2. Production Operator (Offshore)
Adma Opco (Abudhabi U.A.E)
May 2004 to Sept 2004 (Short term commissioning contract)

Responsibilities are:
a) Coordinating the commissioning activities of Gas Injection Plant Phase 3. Monitoring the process in CSP (collector Separation Plant which is Oil gathering Plant); GG2 (Gas Gathering Plant which is also gas injection plant which has 3 Rolls Royce Avon Gas Turbines and 3 Dresser Rand Gas Compressor injecting 90mmscf gas per day) and GIP (gas injection plant) which take its gas from GG2 and injection it at 5000psi pressure. Gip has 3 Rolls Royce Compressors and injects 100mmscf gas per day). Also have to do coverage in Water Injection Plant injecting water to water wells at 3500psi pressure using the DCS (distributed control System) of Bailey.

b) Reporting of abnormalities to the Superiors. Training of the local Operators.
Coordinating with permit to work activities of the plant such as mechanical, electrical and instrumentation jobs in the plant.

3. Control Room Operator (Offshore)
Shell Petroleum Development Company (Nigeria)
From May 2001 to Jan 2003

Responsibilities Are:
a) Commissioning and Monitoring of the oil gathering Station and Associated Gas Plant (For Flare Reduction Project) using the DCS system of FOXBORO I.A.
b) Commissioning and Monitoring the Equipments such as the Gas Compressors and Power generators and turbines (Nuovo Pignone) using the DCS system.
c) Training of the Nigerian Operator trainees

4. Process Operator (Offshore)
Ras Laffan L.N.G. Company (State Of Qatar)
From September1998 To July 2000

Responsibilities Are
a) As process operator monitoring of gas production from Well heads (Gas wells).
Monitoring Glycol Dehydrating system using D.C.S (FOXBORO I.A.).Monitoring the Operation of Typhoon Gas Turbine Generator Sets.
Logging production data and reporting any abnormalities to the production supervisor. Coordinating with Mechanical, Instrumentation, Electrical, Well services and Safety departments for day-to-day plant activities.

5. Production Operator/ Well Head Operator

a) Petroleum Development Oman, (Shell), Oman.
September 1993 to April 1994, June 1995 to November 1995.
b) Al Furrat Petroleum Company (Shell Petroleum Co.) Syria,
Jan 1996 to Dec 1996.
c) Petroleum Development Oman, (Shell), Oman.
From March 1997 to Jan 1998.

Responsibilities Included
a) As Production Operator in Oil gathering stations operating the facility which includes Well Heads, Gas Lift, Water injection, Oil Gathering Stations, PIG Launching / Retrieving, Glycol Dehydration, Propane Chilling, NGL Recovery and Gas Sweating (SULPHEROX) and LNG Plants.
b) Monitoring of crude oil production by maintaining the required station backpressure.
c) Monitoring the gas lift to the individual injection well.
d) Monitoring of water injection to individual water injection wells using the latest SCADA technology and RTUs.
e) Testing of individual oil wells using Daniel Senior orifices for oil, BSW periodically and reporting of abnormalities in production to the supervisor and preparing test sheets for the wells being tested. Also testing of Oil wells using the Multi Component flow meters.
f) Periodic monitoring of Chemical injections like corrosion inhibitor injections, Demulsifier injection & scale inhibitor injections.
g) Periodic monitoring of individual well heads for abnormalities and well output.
h) Checking the annulus pressure of individual wells for communication between annulus for the casing.
Monitoring the well head safety conditions and coordinating with the wire line crew for jobs such as flowing gradient survey using Amerada, static survey, build-up survey, acid stimulation job, well kill job, Gauge Cutter Runs, Well Unloading etc., i) Monitoring safety of the plant and the safety of the hot work / cold work job going on in the plant and logging of plant conditions. Also handled Hot Tapping jobs.
Well versed in Oil and Gas separation process and testing of individual well production using latest D.C.S. of TDC 3000 of Honeywell, U.S.A.
Well versed with Solar Centaur, Ruston TB5000 and Rolls Royce Avon Gas Turbines.
Handled multi-stage gas compressor (Nuovo Pignone) having capacity of 62500 NM3/hour and also handled DEMAG Booster Compressors and Dresser Centrifugal Compressors, Multi stage Babcock Borsig Centrifugal compressors and also related equipment's such as gas scrubbers and Fin-Fan coolers.
Handled emergency and normal start-up and Shutdown activities of the oil gathering Stations.
Preparing daily production reports on PC and reporting to the supervisor concern.
Training of Local operators and trainees.

6. Plant Operator
Saudi Iron and Steel (Hadeed, Al-Jubail).
March 1992 to June 1993

Responsibilities Included
a) Worked as Plant operator in-plant for producing iron from iron oxide by reduction using carbon monoxide and hydrogen.
b) Worked in Natural Gas Pre-treatment plants.
c) Well versed with reforming process and Shaft furnace.
d) Well versed with Control systems TDC-3000 of Honeywell, U.S.A.
e) Well versed with Cryogenic distillation of Methane.
f) Handled the shut down and start up activities in the plant.
g) Training of local trainee operators.

7. Distillation Operator - Grade A
Reverse Osmosis Desalination Plant
Ministry Of Works, Power And Water, State Of Baharain.
August 1989 to August 1991.
Responsibilities Included:
a) Keeping the plant in proper running condition.
b) Monitoring equipment's such as heavy duty submersible centrifugal pumps (capacity 6000 cubic meters per hour); Dual media filters controlled by P.L.Cs (programmable logic controllers); timely logging of plant conditions; controlling the plant parameters such as pressure, flow etc. Using modern Digital Control Systems (CENTUM of YOKOGAWA, Japan)
c) Reporting of any abnormalities of the plant equipment's and process to the foreman concerned.
d) Cleaning the permeater membrane chemically according to laboratory requirements and specifications, using chemicals like sodium sulphate, citric acid, ammonia, detergents, tannic acid and formalin.
e) Re-coating the inner membrane parts to give better output.
The total output was 10 million gallons per day)
Lubrication of equipment's.
f) Training of local operators.

8. Process Technician
Bharat Petroleum Corporation Ltd., Refinery Division,
Bombay, India. (Former SHELL Refineries)
August 1982 to August 1989
Worked as a trainee operator from August 1982 to August 1985. On completion of the training period and successful completion of the N.C.T.V.T. examination conducted by the Govt. Of India was confirmed as Process Technician (Refining Division).

Responsibilities Included
Worked as Process Technician at the aromatics unit of the refinery, which manufactures Benzene and Toluene using Naphtha as raw material. The Benzene output was 85000 MT per year and Toluene output was 17500 MT per year.
Performed assignments in various units of the Oil Refinery such as:

a) Crude Distillation Units having processing capacity of 20000 tones of crude per day. The Crudes include Bombay High crude, Iranian heavy and light and Middle East Crudes like Royal Saudi Crudes. The products of CDU are L.P.G., Wild and treated Gasoline, High-Speed Diesel oil, LDO (Light Diesel Oil), Kerosene and Aviation Turbine fuel.
b) Vacuum Distillation units producing Waxy distillates for Cracking unit.
c) Bitumen Blowing Unit producing Bitumen.
d) Catalytic Cracking Unit using Silica Alumina as Catalyst producing L.P.G, Light Cycle Oil, and Heavy Cycle oil clarified oil and high Octane Gasoline as end products.
e) Sulphur Recovery units to recover H2S from Refinery off-Gases by using Claus process.
f) Platinum Reforming Unit used for producing higher Octane Gasoline.
g) Tank age and Blending Units for dispatching the products such as Gasoline, Diesel (H.S.D.), L.D.O, ATF and LPG.
h) Utilities section including Demineralising plant and Water softening plant, Boilers (BABCOCK and WILCOX make and Cross Tube Marine Type), cooling water system using Turbo set pumps.
Handled the Refinery equipment's like pumps of Centrifugal types and Reciprocating types (positive displacement types) Absorbers, Separators, Air drying units, Reboilers, Distillation columns, Vaporizers, Heaters or Furnaces, Coaelcers, Thomassen Gas Compressors, Atlas Copco Air Compressor and Steam Turbines. Experienced in Plant monitoring using Distributed Control Systems of CENTUM of YOKOGAWA Japan, HONEYWELL, USA (TDC 3000) and FOXBORO, USA.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 2461)

Go to Search Parameters...

Brief Description

Introduction &Objective A petrochemical industry professional with 20 years of extensive experience in the plant operation. Proven ability to lead and motivate project teams to ensure successful plant operation.

Well testing Senior Operator.

Make a Job Safety Analysis and Standart Operational Procedure and Permit Works.

Well Testing with Data Aqusition Supervisor with 10 years experience in Schlumberger and MB petroleum compaqny.

16 years in Oil & Gas Offshore/Onshore production cum Process operations

Professional Engineer, Degree (AMIE Mechanical), with (14 years of International and domestic experience) in operations of large thermal, gas and combined cycle power plant in India, Dubai and Sudan

Free! Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.

DCS Operator for Fractination/Distillation of Fatty Acid,Distillation of Glycerin,Pretreatment of Oil,Splitting Column,Pretreatment of Glicerin Water,Boiler,Steam Turbine,Oil Thermal Heater,Hydrogen Production by Steam Reformer and Methanol Reformer

I am well trained to handle terminal operations, stores / materials management and Engineering / Maintenance activities related to Oil terminals / Petroleum retail outlets. I am 38 years old and have no problem in relocating to a suitable location / posting.

Drilling Foreman / Engineer (onshore) with 14 years on-site drilling supervision experience and 5 years engineering/planning experience (office).

I have robust bases in the quantitative and qualitative expertises of oil productions raw product and refined, the controls of expeditions by pipe, vessels or lorries. This experience(experiment) allows me to transpose my knowledge in sectors of industry as the mining extraction.

13 years experience of operating different kinds of plant as a control room operator,senior operator,and plant operator at oil and gas and petrochemical plants.

With 7 years of rich experience in Plant Operations, Production. Presently working with Niko resources Ltd., as a Lead Production Operator.Functional expertise in handling the production operations with key focus on bottom line profitability by ensuring optimal utilization of resources.

US Citizen, Petroleum E&P Support Advisor/Team Lead /Managing Consultant with superior Vendor-Certified Petro-Computing skills and extensive experience in Multi-Vendor/Multi-Applications User Support, Training and Mentoring for Exploration, Appraisal & Production

Production supervisor/production operator/ on job trainer

Chemical Engineer 1990 NIT Raipur ,Continuous Polymerization,Black Belt Six Sigma,Lead Auditor ISO 9001,14001

Experienced Petroleum Engineer (Drilling and Completions) + Project Management Professional

I hold a master degree in geophysics and bachelor degree in geology and having around four years experience in geophysical data acquisition and processing(mainly in processing).Looking for a job as geophyscal interpreter preferably.

Water chemistry - boilers, Actiflow, and maintenance

I am an Experience British engineer with over 15 years of diverse engineering experience, currently working for SHELL, as an Interface Manager for the Bonga SW, 7BUSD Project. I do have strong analytical and judgemental skills, strong team player. Capable of organizing and motivating technical emplo

Senior field operator with more than 13 years experience in oil&gas field, holding three year diploma in chemical engineering and 1 year technician apprenticeship. Experience in SULFUR RECOVERY UNIT, AMINE REGENERATION UNIT,GAS-AMINE TREATER ,DIESEL/VGO HYDROTREATER, HYDROGEN GENERATION UNIT

Well engineering, daily drilling operations supervision, services coordinator

A time-served Marine Pipefitter with experience of mechanical servicing & maintenance, plant operation and staff supervision & training. A highly motivated and flexible team player.

GAS SCHEDULER OR PRODUCTION TECH

Engineer with 14+ solid years of domestic onshore and offshore O&G experience; drilled or lengthened 30+ horizontal wells; expertise in cost control, field practices, safety training, RRC permits and reporting

plant operations/project management in power, petrochemical industry

I am working with Reliance Industries Ltd. [ Refinary Division ] since 2001. My responsibility is Panel operaton.

Work as HSE supervisor

Coil Tubing/ Petroleum Engineer/Supervisor )

I have 15 years experience inpetrochemical plant.

Faculty of Science, Cairo.B. Sc. Chemistry (Grade Good).

Operations Manager, Barge Master, Barge Captain, Master Mariner, Rigging and Scaffolding Supervisor, Crane Operator.

Ops., Eng. and Field Service Manager: experienced in technical, project and operations management; strong and extensive record in managing engineering & operation personnel teams; implementing from start to finish of corporate technology programs provided to diverse clients around the world.

See resume body

SUMMARY Over 25 years international experience in engineering and supervisory/management positions in the exploration and production of oil and gas for offshore and land drilling/coil-tubing/work over/completion operations.

25 years experience operator / contractor positions willing to relocate status: single

To gain a position that will utilise my knowledge and skills gained through extensive professional experience.

I’m a Power Control Systems Operations Specialist with 20 years operational / supervisory expertise and experience in High Voltage distribution / generation. I’m available for immediate placement, willing to relocate and I will make myself available at your convenience for an interview.

I have worked in different parts of the world in management positions and field operations.My strengths lie in my ability to communicate and work with people of different cultures and producing a team to reach the common goal of excellance by not reducing quality over quanity.

My duties as a Rig Mechanic have included the installation, repair, maintenance, and commissioning, of the rig and all equipment associated with, and involved in the drilling operation.

logistics supervisor, supply chain, rig manager, transportation dorector

Working with GS Eng. & Const. Co. as Commissioning Superintendent for Ras Laffan Refinery project, QATAR.I have strong expertise in the area of pre-commissioning, Commissioning, Initial start up, stabilization of the process and operations, trouble-shooting & achieving production tgt

Geological Asset Manager

Refinery / Utility Plant Operator

NG reforming, Shift convertion, Syn gas production, Diffferent types of pumps and compressors, heat exchangers, catalytic reactor operation

Mechanical / Electrical experience in Boilers, pumps, HVAC Systems, Compressors, steam systems and ancillary services, DHW skids, Chillers, Cooling Towers, Clean steam Boilers, Purified Water Systems, waste water, Low voltage Electrical Systems, Preventive Maintenance Systems.

Plant operator

I 'am a highly skilled Sr. Lead Operator, with a strong English language, highly motivated, always exceed my employers expectation, hold a 2 years Oil & Gas Handling diploma, various computer skills " SAP, Lotus, Excel, Access, Word, Process Net a semi HMI Building Progam.

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

WORKING AS ASSISTANT MANAGER - PRODUCTION / SHIFT INCHARGE IN A LEADING PETROCHEMICAL COMPANY AT IMPORT, STORAGE & HANDLING TERMINAL

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out