Resume - A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional...

Misco Jobs

Resume #4684

CONTACT INFORMATION:
View contact information...

GEOSCIENTIST
Cross-functional Experience in Oil and Gas

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience. Result oriented and effective team player with proven ability at troubleshooting. Ability to proactively identify and solve problems-reverse negative trends, maximize productivity and deliver cutting-edge solutions. Strengths in:

* Exploration and production Geotechnical Evaluation
* 2D,3D Seismic data acquisition, Prospect Generation & Risk Analysis
* processing & Characterization
* Directional drilling/Trajectory Plot Seismic Inversion & Rock property
* Reservoir Modeling Well Log Analysis
* Production Log Analysis Well Site Collaboration
* Geological & Geophysical Mapping Strategic Field Planning
* Design of Oilfield development Plan Project management

PROFESSIONAL EXPERIENCE
Energygate Limited-Warri, Nigeria. 2000-present
(an indigenous service company)
Development Geologist (2004- )
Field Operations Officer (2001-2003)
Well Site geologist (2000-2001)

Recruited initially to coordinate well site operations for Chevron's drilling program as a well site geologist. Interface with drilling contractor, other service providers and client to provide geologic input adjustable to field scenario leading to highly successful cost-effective drilling program.

Elevated to oversee all field service operations in Eastern Niger delta. Advanced later to a development Geologist to pursue strategic service alliance with newly licensed marginal operators and indigenous producers.

Currently pursues all new business development initiative of marginal field operators throughout Nigeria. Provides leadership for a 30-person workforce and holds full business development responsibility.

Selected Results.
Used rock property prediction and wellbore pressure behavior to identify a highly productive pay zone which delivered on completion and testing an excess of 2000bopd.

Proactively reviewed wellbore path with drilling staff to identify cause of deviation leading to a quick redesign of trajectory; achieving target as scheduled.

Analysis of Mud logs and Drill logs to identify possible trouble spots and provide advice on completion and testing.

Improved client liaison leading to a better working relationship and performance rating

Introduced process improvements that maximized output per unit of work done by decreasing lag time 20%, slashed required labor and reduced redundancy 15% while delivering a 18% increase in service performance.

Chinese National petroleum Corporation, - Warri, Delta State 1999-2000
Assistant Processing Seismologist

A contractor with Shell Petroleum Development Company (SPDC). CNPC- party 5168- Seismic Exploration in Isoko Local Government Area of delta State. I was charged with the design and field planning of acquisition parameters, seismic data characterization, Depth imaging/inversion, wave field modeling, AVO analysis, albeit in a team- using Geoquest and Landmark applications.

Texaco Overseas (now Chevron Texaco), Ekpan, Warri 1998-1999
Assistant development Geologist (NYSC)- Field Development Team

Review daily drilling and production report, prepare weekly reservoir performance report. Create production maps, pay zone correlation maps, wellbore trajectory plot, and core data analysis. Monitoring of reservoir performance decline curves. Represented Texaco as a well site geologist during development program of Funiwa, Madu/Ayala fields. Participated in Reservoir characterization study for Pennington field in Lagos; modeling processes of primary to secondary enhanced recovery.

SOFTWARE SKILLS

* Unix/Linux administration, C/C++, IDL, SQL programming
* VIP, Eclipse, Stratamodel, Geolink, Autocard 2D/3D, 3Dmax, WEM, Excel/Acess/Powerpoint, Aries, Grape, Agip (Pres)

EDUCATION

Masters of Business Administration (MBA)
University of Uyo, Akwa Ibom state

Bachelors of Science (B.Sc) – Geology
University of Calabar

Diploma in Information management Systems
International management & Finance Institute, Uyo

Diploma in Autocard Engineering
McRam Learning- Lagos.

PROFESSIONAL MEMBERSHIPS

National Association of Petroleum Explorationists (NAPE)
American Association of Petroleum Geologists (AAPG)

AGE
29 years

REFERENCES
Can be provided on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 2699)

Go to Search Parameters...

Brief Description

WITH profil of graduted technician in electromecanichs and an hight experience in petrochimical industry

Chem Analyst - Laboratory Technician

Working as Petroleum Engineer since 17 years. Engineer, Supervisor and Manager roles in drilling, wellcompletion, production and workover operations in oil and gas E& P .

Experienced oil and gas operations manager with proven record of production optimization, safety and personnel development. Experience in pipelines, gathering, compression, NGL, amine, automation, shale as well as conventional oil and gas operations including drilling, completions and workovers.

Type 65 wpm, Microsoft Excel, Microsoft Word, QuickBooks Enterprise, PowerPoint, Delorme XMap, excellent phone skills, highly organized work habits, accounts receivables, accounts payables, reconciliations, volume discrepancies, allocations, etc.

I am an enthusiastic dedicated person. I have the ability to work alone or in a team environment to complete any given task with utmost care and competency. Ensuring that all tasks are properly planned, to achieve the highest level of safety as so the tasks can be execute incident free

Time served Mechanical fitter with 20+years experience on a variety of petro-chem processes.DCS control room operator. PPO2 in processv technology. Nvq3 in mechanical fitting.

Project oriented, cost cutting manufacturing professional with 15 years of progressive experience in Procurement, Materials Management and Project Management. Specializing in Supply Chain management to include outside processing. Completed APICS certification courses in 2002. Passport obtained in

Free! I am an electrical engineer with over six years of professional experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, Computer Systems, and SCADA systems. Officially certified in Project Management by the PMI.

Diploma of Associate Engineer (Electrical) Working in boc gases as E&I shift engineer.

§ Over 12 years experience in offshore well cum process platforms in the Oil & Gas processing industry. § Extensive experience in production planning & process control room operations

ROV Supervisor with 15 years experience.

Dear Sirs, As you can see on my resume, all my experience is on Marine and Oil related Bussines, if any additional information is needed, please do not hesiate contact me.

Operate fractionation plant, lean oil extraction plant, refigeration plant, instumentation work, maintenance work.

I have total 24 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinary production supervisor, oil terminal incharege etc. I worked on various International companies.

Inlet gas system,TEG Regeneration and Treating system,Amine Regeneration and Treating unit..

Oil Drilling & Production (Quality-Inspection & Maintenance and Auditing)

HSE Training,Risk Assessement,Management,Field Safety,Loss Prevention

Level 1 OGPO looking for work in northeastern B.C.

Petroleum Geologist with 20 years international experience

stat engineer (oil and gas exploration) , drilling rig move fishing

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

Special Skills in DCS Operations

Electrical/Controls/Instrumentation Engineer, Commissioning and Design.

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.

Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.

U.S Navy Aviation Gas Turbine Jet Mechanic

Acquisition and title research

Having more than 9 years of experience in petrochemical, oil & gas process plants and utilities. Having experience in commissioning, pre-commissioning activities in Field, DCS & SCADA. (FOXPORO & Emerson Delta-V Systems)

33+ years in the oil and gas service industry. His portfolio includes (but is not limited to) field operations and supervision, sales, marketing, business development, and management.

Familier with oil refining process an simulations:HYSYS,Flare net - Familiar with CDU (Crude Distilation Unit) /VDU (Vacume Distilation Unit) /HCU (Hydro Craker unit) /NHT,Unifiner,CCR /LPG /VBU (Visbreaker Unit) /AMINE /SWS (Sure Water Stripper Unit) /SRU (Sulphur recovery unit)

Wireline senior field engineer

Proven General Manager, Asset Manager, M&A Evaluator/Negotiator

Drilling Engineer & Manager (on & offshore with deep water) some completions

I have total 9 years experience as production/process operator in the petrochemical industries.

Sales and Operations Officer targeting Productivity and Organizational Development

Production Engineer with strong IT skills and over 6 years experience in oil and gas production engineering and operations, with expertise in surface operations, plant start up, well services, planning, training, HSE coordination and community liaison.

British MSci petroleum geology 1998-2002

Well Service Supervisor or Coil Tubing Supervisor

Degree from "College for chemical technologies".

Solid organizing and planning skills

I have 2 years’ experience within the Upstream oil and gas industry. This has afforded me the opportunity to develop a good knowledge and understanding, of a Production background. I have recently gained a NVQ level 3 in Process operations and would like the opportunity to enhance my experience.

Monitoring production and running diagnostics on well performance, maintaining flow lines, scheduling and supervising wireline/swabbing programs, optimizing plunger lift systems, monitor pressure and flow readings, identify any safety or environmental issues.

Experienced Assistant Driller with 5 + years drilling in Wyoming for Nabors Drilling.

I have 8 yers exp in oil ands gas terminal opertions

To pursue a challenging position which enables me to utilize my communication and technical skills in providing professional knowledge and support to the Oil and Gas and Energy industry

I am currently working for Aker Kvaerner as a Production Technician on the Tiffany platform in the North Sea for the client CNRI UK, in the Tiffany, Toni and Thelma fields. Previous to this I was a CCR/production technician for Maersk Contractors on the FPSO Curlew a 50,000bbl/day vessel in the Shel

I have over 15 years in the production field and consider myself a specialist. I am confident that I can prove to be an asset to your company. I am an “out of the box” thinker, capable of solving problems on all levels.

Directional Drilling Engineer with 8 years of experience working with an important International Oil Service Company, also experience in MWD / LWD, directional well planning and directional drilling services coordination. High motivated, QHSE oriented

Experienced Manager in the Combined Cycle Power Plant Operations

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out