Resume - Process engineer / production supervisor in oil/gas/petrochemical company.

Misco Jobs

Resume #47662

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Process or Production Engineering (chemical) position in oil and Gas Company and Petrochemicals Company.

PROFESSIONAL EXPERIENCE
PT. Styrindo Mono Indonesia (Ethyl Benzene & Styrene Plant)
Process/Technical Engineer 2001 – Now

Scope of Duties:

1. Monitor plant and process equipments performance, provides technical service to other departments on a regular basis. Includes identifying problems and submitting reports with recommendations for a reliable and safe solution.
* Unit consumption
* Efficiency of furnace, compressor, pump, etc
* Deactivation rate of catalyst of dehydrogenation, alkylation and transalkylation
* Heat transfer coefficient of low velocity heat exchanger
* Performance of cation anion exchanger resin
* Performance of adsorbent on IA drying unit
* Etc

2. Provide trouble-shooting service for potential problems. Includes studies related to process problems, preparing test programs, analyzing results and submitting recommendations for solutions or presenting his findings and conclusions to parties concerned.

3. Review routine test and analysis results from laboratory, identifies and analyses deviations and unusual trends, interprets reasons in terms of operations and submits conclusions to Production Department.

4. Define a project or optimize unit operation to save energy and reduce operating cost.

5. Assigned to a task force to work on a project.
* Engineering requisition
* Bid evaluation
* Vendor document review and delivery
* Construction
* Commissioning or performance of equipment

6. Reviews and proceed management of change of feedstock, chemical, catalyst, operating condition, including modification or new equipment or minor changes initiated by our department and or other Departments and recommends approval or suggest alternative solutions. Continue to monitor modifications from conception through to commissioning. Basis for the change are process improvement, operability improvement, reliability improvement, cost reduction and health/safety/environmental.
* Feasibility study
* Process design definition
* Process engineering check to ensure that design standard are being maintained
* Technical safety requirements are met
* Design is to recognized industrial standards and codes
* Materials comply with company standard
* Plant trial program
* Hazops
* Pre-commissioning check on the completed work to ensure the design is to original proposals
* Responsible for discussing any comments or queries arising from the approval issue of the modification package
* P&ID updating

7. Prepares P&ID for HAZOPS and introduces the proposal to HAZOPS committee for Hazard and Operability Study. Takes an active part in HAZOPS proceedings as a process specialist. Acts as secretary to the HAZOPS meetings and action of HAZOPS findings.

Technical Saving Cost Project:

* Ethylene Feed Gas Online from CAPC, 2006~2007
* Fuel Conversion Project I~III, 2005~2007 (Fuel Oil Blending Facility, New Coal Boiler Installment, Conversion to Natural Gas)
* BTM Tank Rearrangement and Relocation of EB Feed Pump, 2005
* Install MS transfer line from PP1 to PP2, 2005
* Condensate Recovery from No.1 Plant EB-1 Unit, 2005
* EB Direct Feed at No.1 Plant, 2005
* Installation of Demineralization Unit at No. 2 Plant, 2004
* Replacement N2 Liquid to N2 Gas as N2 Back Up, 2004
* Styrene Monomer Plant Revamping Project, 2002
* DM Line Interconnection Between SM1 & SM2, 2001

Technical Process Modification:

* Upgrade Material for 2EA-407 (EB Recovery Column Condenser), 2006
* Relocation of NaOCl Injection Point, 2006
* Connecting Demin-1 Outlet to 2FB-710 (water tank of Demin-2), 2006
* Permanent Injection Line for EC-1108A (New Polymer Inhibitor), 2006
* Changing Valve & Install Flow Indication at BZ Diverting Line, 2006
* ERP2-Flow Meter for Replacement and Additional, 2005
* Relocate Tar Rundown Line to FB-693, 2005
* Install Flow indication at Outlet of Air Dryer (FF-861 & 2FF-861), 2005
* Replace and size up CCW line to jacket GB-301, 2005
* Transfer line from FB-302 to PP2, 2005
* Install flow meter at FA-303 blow down line, 2005
* Material upgrade of EA-312 from CS to SUS 304, 2005
* Establish Permanent Facility for EC-3335A, 2004
* Install Oil Transfer Line from IDO Pit Separator to CPI EB-1 Plant, 2004
* Material Grade Up of EA-411 (SM Product Cooler), 2004
* Replace Sampling Cooler SC-402, 2004
* Cutting Concrete Wall of Check Pit, 2004
* Recycled Benzene Treatment at No.2 Clay Treatment, 2004
* New open ditch at 2BF-600 area, 2004
* Additional steam trace at LPG line to 2BA-201/202/203, 2001
* Pressure Gauge for Monitoring 2GA-500A/B Suction Line, 2001
* Modification of ethylene sampling line (2SI1-501), 2001

Technical Report:

* Dehydrogenation Catalyst of No.2 Plant SM Unit for next SDM, 2006
* Economical review of re-operating desalination unit
* Review of using nitrite base chemical at cooling water system
* Review of activated alumina Alcoa F200 on IA drying unit
* Change of corrosion inhibitor type in cooling water system from molybdate to nitrite base chemical
* Performance test of new TBC product
* Investigation of low PH at demineralization unit product
* Hydrazine replacement in boiler water treatment
* Feasibility study to increase ratio of PA to N2 in the blanketing gas of Styrene tank
* Feasibility study to stop one of air compressor
* Vendor Selection for Coal Loader, 2006
* New Coal Boiler Installation, 2005
* Unloading/Loading Catalyst Activity at Dehydrogenation Reactor ASDM 2005
* Countermeasure for corrosion problem at low velocity heat exchanger, 2004
* Dehydrogenation catalyst of no.1 plant SM Unit for next SDM, 2004
* Unloading/Loading Catalyst Activity at 2DC-101/102 ASDM 2002
* EBZ-500 Catalyst Regeneration (Final Study), 2002
* Tonsil 616 GL Performance evaluation, 2002
* EBZ-500 Catalyst Regeneration (Toward 120% capacity after revamping project 2002), 2002
* 2DC-201 Performance Evaluation, 2002
* Estimate quality of ethylene loss for purging 2GA-500A,B suction line, 2001

HSE Management:

* Member of ISO & SMK3 Auditor Team
* Safety & Lost Prevention Representative
* HAZOPS for Demineralized Water Project 2004
* HAZOPS for Fuel Blending Facility 2005
* HAZOPS for New Coal Boiler Installation, 2006

PT. Styrindo Mono Indonesia (Ethyl Benzene & Styrene Plant)
Production Supervisor 1994 – 2001

Scope of Duties:
1. Operating different plant units and or process equipments in utility area and process area with high standard of quality and safety.
* Boiler
* Air compressor
* IA drying unit
* Cooling tower
* Cooling water system
* Desalination
* Demineralization unit
* N2 generator
* Tank Yard system
* Chilled water system
* BOG system
* Pump
* Compressor
* Furnace
* Column distillation
* Reactor
* Heat exchanger
* Etc

2. Understanding control board instruments to indicate, record, and control process variables.
* Dealing with DCS system
* Cascade control
* Tuning controller

3. Preparing standard operating procedure of process equipments operation manual as guidance operator to operate and trouble shoot the process equipments.

4. Preparing schedule of annual shutdown and idle shutdown

PT. Bening Khatulistiwa (Waste and Water Treatment Consultant) 1993 – 1994
Technical Service Engineer

* Re-establishing and enhancing positive relationship with all customers.
* Having knowledge of water treatment chemicals: PH controller, oxygen scavenger, scaling inhibitor and anti foam.

PT. Badak NGL Company (LNG Plant) 1990
On The Job Training

* Condensate recovery unit
* Mercury removal
* Carbonat & DEA system
* Dehydration
* Scrubber system
* Liquefaction

EDUCATION
Bachelor degree in Gas and Petrochemical Engineering, 1986 – 1992, University of Indonesia.

TRAINING
* Management Training Series "Workshop-KAIZEN", July 2005.
* Management Training Series "Workshop-Management of Change", November 2004.
* Management Training Series "Changing & Innovation", October 2004.
* Safety Training Series "Incident Report & Investigation", September 2003.
* Computer Training Series "AutoCAD 2000", May 2003.
* Process Simulation Software Training Series "Chemcad 5.2", April 2003.
* Safety Training Series "HAZOPS & Risk Assessment", April 2003.
* Computer Training Series "Networking & Database System", March 2003.
* Safety Training Series "SMK3 Audit", September 2002.
* ISO Training Series "Understanding ISO-9001: 2000", November 2001
* Management Training Series "Advance Supervisory", October 2001.
* National Seminar "Operation & Chemical Process Technology Development", March 2001.
* National Seminar "Save Energy Building", March 1997.
* Graduated from LB-LIA English Courses, Jakarta (Basic Level Certificated), 2004.

REFERENCES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 2540)

Go to Search Parameters...

Brief Description

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

Process engineer / production supervisor in oil/gas/petrochemical company.

Industrial Electrician by trade who is now working as a Commissioning Operations Maintainer in Explosives and LNG facilities.

Degreed individual with a team oriented attitude. Previous experience in a foreign market working extended hours seven days a week. Possessed a supervisory role with accountability for multi-million dollar assets. Willing to start at the bottom, apply myself willingly to any given task.

Supervised main LNG works from Administration and Utility Area

A qualified engineer with an exceptional and extensive track record in managing large maintenance infrastructures systems for diverse industrial setups

30 years in worldwide Operations, Sales, Engineering (Cementing Specialist) & Management with leading international service companies - principally Dowell Schlumberger & BJ Services.

Position held : Production Technician

Have sound understanding in Geology. Graduate in Geology. Doing Post Graduation(final year) in Geology. Done field work. Computer-friendly.

I am an Mfg/Pro ERP techno-functional consultant working with a reputed MNC as an offshore team lead.

* PROJECT / PROGRAM MANAGEMENT * OPERATIONS * ENGINEERING *

I have fifteen years of experience, with a strong focus in the mining industry. Key areas of expertise include socio-economic risk and impact assessment, stakeholder engagement, policy development, social and environmental corporate reporting, due diligence and social auditing. This experience has b

24 years in oilfiled \ Safety Rep.\ EMT

Strategic thinker and forward, proficient at working with financial controls, experienced in QHSE, Operations audit, breath of Oilfield services and technical knowledge.

Power engineer with post graduate diploma in thermal power plant engineering. Handling emergencies and restoring the plant stability in short time. Trouble shooting the problems in a short span.

Logistics, Procurement and Materials Manager (Supply chain)

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Contracts Manager in switchgear environment (ABB) - manage 5 Project Managers - Engineers in switchgear and associated equipment projects.

Contracts & Global Procurement Manager, Change Agent, Systems Initiation, Strategic Sourcing, Seasoned Negotiator, Proven Organizational & Team Leadership, Collaborative Mgmt. Style, Broad knowledge of OEMs & Suppliers, Contractor Oversight, Systems & Procedures, Middle East Mega-Project Experience.

Supply Chain, Manufacturing Manager with 14 years of experience. MBA and Industrial Engineering degrees

I am a mining engineer and also has a masters degree in urban and regional planning.

Over 16 years experience in the field of I&E and telecommunications more focus on project preparations, execution and commissioning. oil & gas industry projects and operations (UAE), power plants, telecommunications and bio-medical equipment. Having 6-yrs are on the supervisory level capacity, 8 on

I am a pet. eng. working as drlg rig supervisor for petrobel in egypt.

To resume a career in the slickline / wireline area (or other associated areas) in the oil and gas industry. To be considered for further slickline / wireline training, so as to provide your company with the asset of a well trained, reliable and intelligent employee.

20+ years in administrative field, ie. human resources, managerial, recruiting, exec. assist, proficient in Microsoft Office 2007

He has more than 25 years of experience; from his current work in hydrogeological and hydrochemical assessment, environmental monitoring, and capacity building. He has managed many projects as well as acted as team leader on various project components.

I am a Project Controls Manager currently based in Saudi Arabia with over 20 years experience in the Oil and Gas, Construction, Mining and Property Development industries. Now looking to relocate to Malaysia, or Singapore.

ESP, PCP, SRP Application Engineer

A time served Instrument Technician with over 5 years experience as a Production Technician/Control Room Operator on an operational production installation, and as part of the operations team on a major project.

Maintenance Manager Engineer Middle East Experience, Looking for work in UAE

6 Years in Power Generation, Steam Generation(HRSG) & Desalination (MSFE).

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Tim Sweeting has been working in environmental and HSE management since 1994, mostly in oil & gas developments. His broad expertise design, construction and operations, auditing, waste management, pollution prevention and managing client/contractor relationships. MSc and professional memberships.

Experience driving loading shovels, Excavators, Dumpers. Managing quarrys and concrete plants

An Experienced HSE Supervisor having worked with many Multi national companies and being recognised by those companies for the excellent job done. The Clients include Exxon Mobil, Single bouy Moorings (SBM), Qatar Gas II, British Petroleum (BP), Anadarko, Saudi Aramco, ARCO Dubai, DPC, RAKGAS, etc.

I am a machinist by trade, got into service tech., then field machining and enjoyed it.

I am a highly motivated Operations Manager and am always ready for a challenge. I have extensive experience in management and I am actively seeking a position that fits my skills and experience. Please review my resume to see further details of my experience. I am self moti

Commissioning

Handling key customers like Saudi Aramco, Sabic Affiliates, Saudi Electricity Company, Saline Water Conversion Corporation, etc in the western region of Saudi Arabia related to Sealing Solutions.

MECHANIC/WELDER/GENERAL MAINTENANCE & REPAIRS

BSc, 10 years field/management experience in pipeline integrity, pipeline inspection, direct assessment, risk models, project management, surveys, non destructive testing etc.

Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors

I have 25 years of multi disciplined, design, engineering, and project management experience with very strong automation skills. I am highly experienced with specialize, automated process equipment systems for Oil & Gas, Petrol Chemical, Power Generation, Semiconductor,Pharmaceutical,Water & Waste

My skills make me a leader no matter what job or position, I'm successful........thanks!

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

PLM Degreed Registered Landman with more than 9 years of land related experience & 12 years in the oil industry. MBA degree. AsTeam Leader, supervise landmen of varying levels of experience. Duties include full title abstracting, curative, lease acquisition, due deligence, etc.

A results-oriented Analyst combining hands on management consulting, project finance, market analysis and mining operations experience, I provide actionable advice for the key business decisions that enhance competitive positioning.

I have worked in the Petrochem/Oil and Gas industry for 20 years. Vast knowledge of all support qualifications, document control, purchasing, expediting and subcontracts work.

Process Operations Manager with extensive overseas experience in oil, gas, petrochemical and pigment industry. Have managed and trained work forces. Have excellent IT skills, is a PTW issuer, possess extensive planning and administrative capabilities and has issued technical manuals and reports.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out