Resume - I had more than 12 years experience in field of Instrumentation, through Mainten...

Misco Jobs

Resume #48852

CONTACT INFORMATION:
View contact information...

OBJECTIVE: Instrument Engineer / Lead Instrument / Electrical Technician

QUALIFICATION:
- I had more than 12 years experience in field of Instrumentation, through Maintenance, Project Engineering, Construction, Commissioning and Start up of Oil and Gas and Petrochemical Plant. (Off Shore and On Shore)
- Extensive experience in DCS Engineering, Installation and Start Up.
- Fully experience in instrumentation design, operation, hook up, calibration, loop checking, fault finding and repair.
- Well understand Emergency Shutdown System, Fire and Gas System, Gas Turbine Control, Compressor Control, Well Head Control, Oil/Gas Separation and Utilities Equipment Packages.
- Excellent understanding of Function Block Diagram, Cause & Effect Chart and Complex Control.
- With excellent experience in this brand of DCS (Yokogawa / Honeywell), PLC (Modicon, Allen Bradley, Siemens), Safe Guarding System (Triconex, Yokogawa Prosafe, Honeywell FSC), Vibration System (Bentley Nevada, Bruel & Kjaer).
- Well understand communication protocol like Hart, Fieldbus, Modbus, Profibus, RS and Lan Network.
- Well experience in SAP program.
- Certified Instrumentation and Control Engineer by Philippines Instrumentation and Control Society.
- My Basic Offshore Safety Induction and Emergency Training (BOSIET) are valid until June 2008.
- Certified Technician for Electrical Equipment For Hazardous Area by Australian Authority
- Fully understand HSE and Permit to Work System

WORKING EXPERIENCE:
Amec Services Ltd., Philippines Branch Office
9th Floor Asian Star Building, Asean Drive,
Filinvest Corporate City, Alabang, Muntilupa City

Conoco Phillips Australia
Bayu Undan Gas Field, Timor Sea (Off Shore)
June 2004 to Present
Position: Instrument / Electrical Technician

Duties and Responsibilities:
- Responsible in maintaining the plant in normal condition and support operation in their day to day production.
- Performed preventive and corrective maintenance of all Process Instrument like Transmitter, Control Valve, Analyzers and Ultrasonic Metering System. (brand like, Yokogawa, Fisher Rosemount, Valtek, Flowserve, Bifold, Panametrics, Micro Motion, K-Tek, Krohne BM 70A, Omni)
- Used and maintain Honeywell DCS (TDC3000) and FSC System.
- Maintained Gas Turbine Generator (Mars), Flash Gas Compressor (Taurus) by Solar Turbine with Allen Bradley PLC and Re-Injection Compressor (RB211) by Rolls Royce.
- Carryout maintenance of Vibration Management System (Bruel & Kjaer, Bently Nevada and Compass Monitoring System)
- Maintained Fire and Gas System, with Optima Gas Detector, Excel Gas Detector, IR Flame Detector, Series 2000 H2S Detector, MR300 & Aspirated Smoke Detector. (Zellweger, Detronics)
- Perform maintenance in Water Mist, Energen System and Deluge System.
- Familiar in Fire Water Pump and Air Compressor Package.
- Perform UPS maintenance and Other Low Voltage Equipment.
- Used SAP program in maintenance management.
- Well understand gas production operation (Condensate, Propane, Butane, Methane).
- Perform Gas Test using Impact Pro, Minirae, Vrae and Jerome Meter during process equipment maintenance.

Yokogawa Philippines Incorporated
# 3 Topy Industries Bldg. Calle Economia, Bagumbayan
Libis, Quezon City
Feb. 17 1997 to June 2004
Position: Senior Engineer I (Supervisory Level)

Duties and Responsibilities
- Executes Project Engineering, Installation of Field Instrument, PLC and Distributed Control System (DCS). Specifies DCS Hardware, Cable Sizing, Power Supply, Breaker and other materials as per project specification and requirement.
- Task included site supervision, System Start Up, Hot Cut Over and Commissioning.
- Develop and Construct Engineering Document, Project Schedule, Test Procedure and Instrument / Electrical Drawing.
- Engineering Document like, P & ID, System Configuration, DCS Hardware Specification, Panel Specification, Instrument Data Sheet, Power Consumption & Heat Dissipation, Grounding Scheme, I/O Data Base, Panel Layout Drawing, Termination Drawing, Loop Drawing, and Hook Up Drawing.
- Conducting / attending technical clarification meetings for precise customer requirements.
- Execute Factory and Site Acceptance Test to ensure the designed are free from error.
- Prepares and compiles As-Built documents so that all engineering works are documented for future references.

Project Accomplishments:
Costumer: Schering-Plough Ltd. Singapore Branch Project Duration: Jan 2003 to Mar 2004
Position: Project Engineer Project Generation: Singapore
Project: Multi Product Plant Phase 2

Costumer: Universal Robina Milling Corporation Project Duration: June to Dec 2002
Position: Project Lead Engineer Project Generation: Negros Or., Phils.
Project: Boiler #3 Automation Project

Costumer: Schering-Plough Ltd. Singapore Branch Project Duration: Oct 2000 to June 2002
Position: Project Engineer Project Generation: Singapore
Project: Tank Farm, Multi Product Plant, R&D Facility

Costumer: Petron Refinery Corporation Project Duration: March 2000 to Oct 2000
Position: Project Lead Engineer Project Generation: Bataan Phils.
Project: Lightning Protection

Costumer: Abu Dhabi Gas Industries Ltd Project Duration: August 1999 to April2000
Position: Project Engineer Project Generation: Singapore
Project: Gasco Ruwais Project

Costumer: Kertih Aromatics Project Duration: March 1998 to April 1999
Position: Project Engineer Project Generation: Singapore
Project: Kertih Aromatics 2 Project

Costumer: Caltex Refinery Project Duration: Feb. 1997 to March 1998
Position: Instrument Technician Project Generation: Batangas, Phils.
Project: Re-Instrumentation and Modernization

PETCON / FAFCO
Dammam, K S A
Jan. 1995 to Dec. 1996

Project Accomplishments:

BROWN AND ROOT SAUDI LIMITED
Sadaf Expansion Projects
CA / EDC, MTBE, and UOC Project
Madinat Al-Jubail, Al-Sinayah, K.S.A.
Dec. 1995 to Dec. 1996
Position: Instrument Lead Technician

Duties:
- Responsible for Bench Calibration and Physical check of all Instruments before installation, instruments like Flow, Pressure, Level, Temperature and Magnetic transmitter of Honeywell brand using Smart Field Communicator Model 102 and 103.
- Calibrate and commission Micro-motion and Control Valve by Fisher Rosemount were using SFC model 275, also Yokogawa vortex transmitter, and pneumatic controller.
- Lead group of technician for loop checking; loop acceptance, Commissioning and Start-up in CA/EDC Area.
- Check and verify the operation of all Complex Loop as per specification and writes up, this include Interlock checking for Emergency Shutdown and Brine Filtering System.
- Here I expose in Honeywell TDC 3000, Triconex System, Compressor Controls CCC, and Modicon PLC for automation of Brine Filters Unit, Bently Nevada vibration system for all compressor.

SNAMPROGETTI ARABIA LIMITED
IBN HAYYAN / PETROKEMYA
PVC Paste Plant Project
Madinat Al-Jubail, Al-Sinayah, K.S.A.
Contract No. PVV-CO-CT-200003
Jan. 1995 to Dec. 1995
Position: Instrument Technician

Duties:
- Responsible in Commissioning, Start-Up and Maintenance of PVC Paste Plant.
- Task include calibration of field instrument like Control Valve, Flow, Level, Pressure, Temperature, Ultrasonic Level, Magnetic Flow and Micro Motion transmitter using hart field communicator model 260.
- Simulate and monitor all interlock of the VCM Reactor, up to the Maxon Dryer for emergency shutdown system.
- Here I expose to Fisher RoseMount field instrument, Provox System, (DCS), Elliot Air Compressor System, Siemens Sematic S5 (PLC) and Bently Nevada.

TELEFUNKEN Micro-Electronic, Phil. Inc
FTI State, Taguig, Metro manila, Phil
June1993 to Jan. 1995
Position: Line Technician

Duties:
- Responsible maintenance and preventive maintenance of bonding, die attach, auto assembly machine like K/S 1470 etc.

Coca Cola Bottlers Philippines
Machine and Equipment Rehabilitation Services Department
Pulo, Sta Rosa, Laguna, Phil.
Jan. 1993 to Jun. 1993
Position: Instrument / Elect. Technician

Duties:
- Responsible for corrective maintenance and modification of all machines in the bottling process.
- Performed calibration and servicing of bottling instrument like controller, recorder, pressure and level gauges, digital counter, control valve, ammonia compressor, motor, rewiring of control panel.
- Machine like soaker, filler, packer, carbo cooler and boiler.

FORMAL EDUCATION:
Don Bosco Technical College
Diploma of Instrumentation Technology
Major in Process Control Instrumentation

CERTIFICATION:
Certified Instrumentation and Control Engineer by PICS
Certified Technician of Electrical Equipment for Hazardous Area

COMPUTER LITERATE:
Proficient in Microsoft Office, AutoCad, Visio, SAP

GROUP:
Philippine Instrumentation and Control Society (Member)
Instrumentation Society of Don Bosco (Member)

TRAINING / SEMINAR ATTENDED:
Basic PLC
Conducted By PICS
Distributed Control System, CENTUM CS
Conducted By Yokogawa Philippines Inc.
Explosion Protection by Means of Intrinsic Safety
Conducted By Pepperl + Fuchs
Analyzer Seminar
Conducted By Yokogawa Philippines Inc.
Distributed Control System, CS 3000
Conducted By Yokogawa Philippines Inc.
Gas Chromatograph (GC2000)
Conducted By Yokogawa Philippines Inc.
GAMP 3 Good Automation Manufacturing Practice for Pharmaceutical and Food Industries
Conducted By Eutec and Yokogawa UK
Yokogawa Philippines Inc. Supervisory Development Program
Conducted By HR Approaches, Inc. (HRAI)
Basic Offshore Safety Induction and Emergency Training (BOSIET)
Conducted By Consolidated Training System Inc.
Electrical Equipment For Hazardous Area Training
Conducted By MOXI Skills and Training Australia

PERSONNAL REFFERENCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 2722)

Go to Search Parameters...

Brief Description

Precommissioning, commissioning, operation process engineer

Two years of oilfield experience as floorhand, relief motorman and relief derrickman

5 years Exp in Artificial lift design and operations , production optimization , equipments sales and proposals

19 years of experience as a Camp / Accommodation-Facilities Management (Staff Welfare Operation and Maintenance) in Oil & Gas, EPCC, Company (Road & Bridge, Electro-Mechanical Contractor.

6 years of experience as Drilling Engineer for Major Operator company in Denmark (North Sea Project) and as Drilling Supervisor for operator company in Turkmenistan.

Planner, scheduler, Teamwork, time manangement, lead, excellent communnication

Twenty five years experience in ten manufacturing sites with four integrated major and three independent oil companies. Responsibilities include Unit Operator through Refinery Manager, and span operations, maintenance and technical departments. Steady promotion and career growth.

LPG,NAPHTHA,FUEL OIL, AMMONIA STORAGE TERMINAL AND UNLOADING FROM SHIP IN CALTEX-SPIC LIMITED,INDIA- LPG,AMMONIA STORAGE TERMINAL. UNLOADING FROM THE VESSEL USING RMCA UNLOADING ARM.

I'm Algerian, 37 years old 15 years experience in oil and gas field

Three Years Diploma holder in Mechanical with 5-years experience in an Oil & Gas E&P Inc. as "PRODUCTION OPERATOR", Seeking prospect to utilize my knowledge, experience, skills and exceptional ability for the post of "PRODUCTION/FIELD/PROCESS/FACILITY OPERATOR" in an Oil and Gas organization.

SAP knowledge,Material engineer,controller.Thorough knowlege of Isometric drawing,fabrication,material manual,and inventory.oil and gas field,gulf and offshore experience.

Monitor Equipments and Products to ensure the Plant runs smoothly

I have completed my graduation in mechanical engineering and parallel to that i did a diploma in industrial safety ( distance mode) . I am looking for a job in oil field as a trainee graduate engineer in the drilling department to begin my career as a drilling engineer

An MBA Finance with strong knowledge of Hedge Accounting and Derivatives valuations and experience with a Big 4 and Financial Software company.

Crawler Crane Operator

Air Separation Operator with 10+ years in the cryogenic field. Started in the Marine Corps and now working for a major bulk gas supplier, operating a 400 ton liquifier.

Fully qualified analytical chemist. 4 1/2 years experience in the offshore industry on a FPSO, offshore Angola. Recently promoted to supervisor.

I already have an expirience as a M/LWD Field Engineer during my internship program.

Over 6+ years experience in Content Management. Professional Proofreading, Editing, Writing, Documentation using various editing tools as Framemaker, Latex, MS-Word.

: 25 Years experience inLicensor selection for SRU / DCU/ HCU /FCCU/ DHDT/CRU units

I am petroleum engineer having more than six years working experience in oil and gas exploration and production company

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

Hard working, Honest, Reliable

My major responsibilities are Core Photography, Core Slabbing ,Core reservation and Storage Services ,Lithology rock description ,Real time monitoring of drilling parameters, preparation of formation evaluation logs, identification and classification of samples

Offshore Installation Manager with 25 years experience in the Oli and Gas industry

Development of Lab analysis procedure using ASTM, APHA, UOP & Shell reference methods to minimize the cost.

Deepwater Completions Consultant

5 years experience in obtaining Leases, title searching, etc...

Has the experience and skills required to manage, supervise, handle and monitor all job related aspects of Safety, Health and Environmental protection. Capable and knowledgeable in the process, development and application of different Safety measures that are vital in Offshore & Marine Safety,

Panel Operator or Senior Operator

Experienced New Technology Key Account Manager

PLC,SCADA,HMI/MMI,DCS,Temperature Instruments

Drilling Engineer with experience in drilling and completions operations in Saudi Arabia and South America (Exploratory wells, H2S and gas wells, directional and vertical wells up to 17000 ft)

I have thirty eight (38) years in the oil and gas industry as a Landman. During my career I have worked in over thirty (30) states here in the United States. At this point in my career I would consider myself a "Senior Landman."

Production plant operator

Supervisor, Health, Safety and Environmental. Responsibilities to include: asset management; quality, health and safety initiatives; implementing innovative solutions to practical problems; motivating and development of personnel.

MSc. Eng. (Canada); 17 years experience; Photogrammetry, Surveying, Mapping (all production aspects), GIS (ArcGIS/ArcSDE, MGDM); Production/Project Management, Software Development; System Design, Data Integration, Support, Training, Research, Geomatics

Offshore Experienced

I had more than 12 years experience in field of Instrumentation, through Maintenance, Project Engineering, Construction, Commissioning and Start up of Oil and Gas and Petrochemical Plant. (Off Shore and On Shore)

Experienced Refinery Operator

I have experiences gas plant, good skill, attitude and knowledge about the production process in Gas Company. I had experiences with acid gas (CO2 & H2S) removal by potassium carbonate absorption and MDEA absorption system, Regeneration absorbent, Dehydration unit, Gas chilling & Liquefaction unit.

M.TECH. in Applied Geophysics, Acquisition,Processing & Interpretation of Seismic data, 3-d modelling of subsurface,petrophysical interpretation,Attribute extraction,synthetic generation, Software Testing.

Advanced Process Control and Optimization: Multivariable Control Modeling, Inferential Modeling, APC Online tuning and commissioning and step testing. Product Honeywell Profit Suite. Process experience: VDU, heater pass balance and MSDW/HDT

Petroleum Engineering from Pune University/Sub Surface Open Hole Data Digitizer and Processor/Well testing, Sand filtration, Slickline/Production Technologist

I'm Geophysicist with 3 years field experience

11 years experienced field QC/Geophysicist, polish citizen, MSc diploma in physics, 2D and 3D land seismic prospect design, infield data processing - up to the time migrated 3D volume, shallow refraction and up hole programs, QA/QC of all aspects of seismic data acquisition.

Total Experience : Eleven years in Refinery & Petro-Chemical Industry

Dear sir, I have experience of unit start ups, shutdowns and commissioning. I have eleven years experience as a petrochemical operator. I have recently been working for a catalyst company which has included installing trays and filters etc.

One year of site investigation experience including gas & water monitoring, soil/water sampling/testing, drilling supervision (Rotary, Shell & Auger, Window and Non-window sampling), trial pit supervision, logging (BS: 5930). Also factual and interpretative report writing.

Graduated Professional Chemical Engineer I have many years project engineering experience and this in a number of positions and countries.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out