Resume - Fully qualified analytical chemist. 4 1/2 years experience in the offshore indu...

Misco Jobs

Resume #4963

CONTACT INFORMATION:
View contact information...

Personal Information
Marital status: Single
Nationality: Dutch
Date of Birth: 25 February 1973
Place of Birth: Heeswijk – Dinther, The Netherlands

Position Production Technician/Control Room Operator/Production Supervisor

Education
2003 – 2004 City & Guilds
Petroleum Processing Technology, Petroleum Open Learning (10 modules).

1993 – 1998 Hogeschool Zeeland (Zeeland Polytechnic), Technical and Maritime Faculty "De Ruyter", Higher Education and Scientific Research, Vlissingen
Full-time four-year study programme Chemistry.
Direction of qualification: Analytical Chemistry.Entitled to the degree of Ingenieur (Ing), equivalent to Bachelor of Science (B.Sc.).

1991 – 1993 Hogeschool Zeeland (Zeeland Polytechnic), Technical and Maritime Faculty "De Ruyter", Higher Education and Scientific Research, Vlissingen
Propaedeutic degree obtained in 1992 and second study-year also finished successfully.
Direction of study: Maritime Officer (Nautical).

1985 – 1991 Zwijsen College, VeghelHAVO (higher general secondary education).

Professional Experience
Jan. 2004 – present SBM Production Contractors, FPSO Kuito, Angola, client: CHEVRONTEXACO
Production Supervisor
On 4/4 week-rota. With main activities:
* Permit Coordinator.
* Preparation of plant for intrusive maintenance.
* Preparation of operating procedures/guides.
* Ensure safe and efficient operation of the process facilities.
* Supervision of production technicians and laboratory technicians.
à Completed STOP for employees and commenced with STOP for supervisors training.

Dec. 1999 – Dec. 2003 SBM Production Contractors, FPSO Kuito, Angola, client: CHEVRONTEXACO
Production Tech Grade 3 and Control Room Operator
During start-up setting up the laboratory (BS&W, API, RVP, Viscosity and Salt in crude) and assisting on plant. As a production technician/CRO with main activities:
* Area accountable for all work in designated process areas.
* Starting up and operating of oil separation facilities, gas compressors, glycol dehydration and water injection plant.
* Monitoring the correct operation of all plant and equipment.* Undertaking first line maintenance.
* Operating and optimising of daily requirements for chemical dosing associated with the process system.
* Control Room Operator (DCS – Moore's).
* Fully conversant with safe operating practices and compliance with permit to work systems.

Jul. 1998 – Nov. 1999 SBM Production Contractors, Monte Carlo, Monaco
Technical Document Controller
Recording, organising, making available to all company personnel and maintaining in proper order the technical documentation/vendor data books for equipment installed on marine units. Receiving from group-associated companies all technical documentation when a new marine unit is handed over.

Apr. 1998 – Jul. 1998 DSM Andeno, pilot plant, Venlo
Process-operator
Involved in the test production of a semi-product for a new medicine for MERCK. Mixing ingredients (acids, powders, cyanide, etc.) and performing test analysis during the process. (5-shift system)

Jan. 1998 – Mar. 1998 Waterschap (polder-board) Zeeuwse Eilanden, Laboratory – heavy metal department, Sluiskil
Analytical Chemist
Determination of chrome, copper, nickel, cadmium and lead in water and surface water using GFAAS. Receiving, preparing and analysing samples and reporting results into LIMS.

Jul. 1997 – Jan. 1998 NV Delta Nutsbedrijven (public utilities), Laboratory, Terneuzen
Graduate Analytical Chemistry
Project: Quality guarantee of the method for analysis of water for dinitrophenols, triazines, chlorophenoxcarbonacids and bentazone (pesticides) using SPE followed by GC/MS-analysis.

Jul. 1996 – May 1997 Hoechst Holland NV, Central Laboratory – radiography department, Vlissingen
Trainee Analytical Chemistry
Training: Routine analysis and setting up a measure programme for gypsum-cake, by-product of the production of phosphor, at the XRF.

Jul. 1996 Hoechst Holland NV, Central Laboratory, Vlissingen
Analytical Chemist
Performing routine analysis on the production process (2-shift system).

Training
Jul. 2000 Basic Offshore Safety Induction and Emergency Training (OPITO approved), DHTC, Den HelderValid until: 07 July 2004

Jul. 2000 Fire Fighting and Rescue Team Basic (NOGEPA 2.6A/B), DHTC, Den HelderValid until: 14 July 2004

Languages
* Nederlands/DutchLevel: mother tongue.
* EnglishLevel: good.
* Français/FrenchLevel: some knowledge (following a course).
* Deutsch/GermanLevel: some knowledge

Visa
AngolanValid until April 2004.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 2462)

Go to Search Parameters...

Brief Description

A senior-level environmental, safety, security and health professional who has worked in the manufacturing as well as EHS functions for private firms as well as large corporations and consistently contributes to corporate goals. A proven trouble-shooter, problem solver and innovator with a strong t

I am working as a Executive Engineer in SIEMENS PAKISTAN LTD IN Engineering, Construction & Maintenance Department (Oil and Gas Projects). Currently working on a Project of Lasmo ENI Pakistan Limited working as a field engineer & had gained a experience of Construction of Structure & Piping.

BS in Petroleum Geology.

Key Technical Skills

Drilling Fluids Engineer / Consultant with expertise in all drilling fluids including Silicates, Glycols and syntetics. Expertise in deep water, ERD and HPHT enviroments. Skills in operations, coordination, tendering, well site, marketing and presentation

IIT Chemical Engr with 23 yrs exp in Sales & Marketing of Downstream Petroleum & Petrochemical Products in Fortune-500 Oil & Gas Company

Communicates well at all levels, high integrity and personal commitment.Good organisation and leadership skills.

Work Over and completion for onshore rig

Pre sales consultant, product consultant, business analyst

APICS (CPIM) certified, Graduate diploma in Production Engineering

Petrochemical Process Operator dealing with Polypropylene and Polyethylene production. More than ten years experiences with processing, treating materials, handling of product, pre-commissioning, commissioning activity and start-up the new plant.

EXPERIENCED MARINE SUPERINTENDENT - MASTER MARINER, FPSO / TANKERS / SHIPYARD / OFFICE BASED

Was involved in the pre-commissioning of Utilities system through close liaison with construction and subcontractor personnel.

Guager, Consultant, Production

14yrs oil and gas experience covering pipeline pigging operations, pipeline inspection activity, fpso production operations in crude oil plants, water reinjection plants, gas reinjection plants, gas dehydration plants, produced water handling and discharge, safety management and implementation

Experienced truck pusher, driver manager, frac. tanks and vacuum trucks

More than 30 years of experience in Control & Instrumentation field, out of which 28 years in a leading Engineering Consultancy organization MECON Ltd. (Govt. of India Undertaking) in Steel, Non-Ferrous, Chemical, Petrochemical & Power

Sir, as I am working since couple of decades in oilfield both onshore and offshore I have come across all sorts of jobs related with mobile land and offshore rigs, jackup self elevated platforms, barges heavy lift ships upto 2ooo ton crane capacity, engines cat, GM, cummins, mudpumps,bop,X" valves

PRODUCTION PLANNER,PRODUCTION CONTROL 25+YEARS EXPERIENCE

B, Tex/ch chemical engineer having experience in Oiland gas with 14 years

HSEQ manager, management system development, auditing, safety case development

Very good experience in the mechanical maintenance of various oil fields, gas companies and refineries. Familiar with day to day maintenance planning, shutdown planning , CMMS and IPP syatems.Familiar with Primavera P3-e, MS Project, SAP-R3, MAXIMO&TEROMAN. Budget preparation&cost control

Machanical & Auxiliary Operator power plant in Wartsila 18V46 & 20v32 Engines Exhaust Gases Boilers, Aux. Boilers, Oily Water Treatment, Membrain Water Treatment & Wesfalia Separators &11Kv cable installation Drill jumbos shotcrcat equipment & submersible pumps working in the Excavation and Linin

Training

To put my best possible efforts by applying my professional qualification and expertise in order to enhance the image of the organization in which I am working.A challenging position requiring creative and innovative approach to Oil industry , Quality control of sales oil, Crude oil process, Laborat

I am a Diploma Mechanical Engineer and am an oil & Gas production / plant operator, having Ten Years experience. Now I am working for OXY (Occidental Petroleum of Qatar ltd) and QP as Well Completion Assistant and Well-head Operator through SOS (Specialized Oil Services)

Diploma in mechanical Engg and at present working in QATAR STEEL as DR plant operator

I have Bachelor Dagree in Chemical Technology and have 6 year working experince in refining field in operation

NQF, National Qualification Forum, Qualified as Production Artisan Grade 4

experienced professional seeking work as facilities engineer

Commissioning engineer of C2-cracker plant, Operation engineer of c2-cracker plant,operation engineer of gas refinery and SRU

Engineer / Supervisor Oil Industry upstream production, maintenance & construction. Large field oil production supervision, light & heavy crude oil, well ops & monitoring. Tank farm & ppln construction. Budgeting & Contracting Eng

Seismic data Interpretation is a complex yet challenging aspect of geophysical sciences. Getting this work write not only requires patience but needs a knack of enthusiasm and adventurism along with a sense of responsibility. Same experiences you will find in my CV.

I am a professional mechanical engineer, with 18 years hands on experience of pre-commissioning, commissioning, startup, and operation in oil & gas facilities and power plant generators.

I am looking for a field operator position! I have just under 6 yrs in production testing where i preformed completions of all sorts, as well as work overs, pump changes abondenments inline tests, etc. Im working on my 4th class power engineering.

Offshore Crane Operator currently seeking equivalent position w/ proven potential for advancement to BCO

Looking for work opportunities preferably in the area of Completions database administration/Punchlist/Handover. Work experience of over 10 years with 5 years in the Oil and Gas commissioning sector. My skills are multi-tasked mostly in project documentation and completions database administraton.

Precommissioning, commissioning, operation process engineer

I have exposure of Process engineering,Project & commissioning .Also exposure of Operations, manufactring of Chemical, Fine Chemicals, Agrochemicals plant.

Planner, scheduler, Teamwork, time manangement, lead, excellent communnication

LPG,NAPHTHA,FUEL OIL, AMMONIA STORAGE TERMINAL AND UNLOADING FROM SHIP IN CALTEX-SPIC LIMITED,INDIA- LPG,AMMONIA STORAGE TERMINAL. UNLOADING FROM THE VESSEL USING RMCA UNLOADING ARM.

I'm Algerian, 37 years old 15 years experience in oil and gas field

A Mechanical engineering bachelors degree holder with twelve years experience in the oil industry with three years Refinery operations experience at the Mombasa Kenya Petroleum Refineries Limited (KPRL). Six years as Terminal Operations Superintendent and three years as a Training Specialist.

Three Years Diploma holder in Mechanical with 5-years experience in an Oil & Gas E&P Inc. as "PRODUCTION OPERATOR", Seeking prospect to utilize my knowledge, experience, skills and exceptional ability for the post of "PRODUCTION/FIELD/PROCESS/FACILITY OPERATOR" in an Oil and Gas organization.

I have completed my graduation in mechanical engineering and parallel to that i did a diploma in industrial safety ( distance mode) . I am looking for a job in oil field as a trainee graduate engineer in the drilling department to begin my career as a drilling engineer

Oil/Gas Refinery Safety Supervisor/Engineer

Crawler Crane Operator

Air Separation Operator with 10+ years in the cryogenic field. Started in the Marine Corps and now working for a major bulk gas supplier, operating a 400 ton liquifier.

Fully qualified analytical chemist. 4 1/2 years experience in the offshore industry on a FPSO, offshore Angola. Recently promoted to supervisor.

I am a hardworking trustworthy individual who has been working in the tourism industry for the last 10 years. I have managed food and beverage operations as well as horseback guiding camps. I believe that my skills working in this industry would be transferrable to the oil industry.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out