Resume - All aspects of mineral processing plant construction

Misco Jobs

Resume #50013

CONTACT INFORMATION:
View contact information...

Objective:
Seeking a Construction Manager or Project Engineer position where I can offer an extensive hands-on experience in administrative and technical knowledge on commercial and industrial projects.

Education:

B.S. Building Construction Virginia Polytechnic Institute
Graduate Studies Structural Analysis University of New Mexico

Languages:
Fluent in English, French and Spanish.

Qualifications:
Feasibility's studies. Estimating. Bidding.
Contractor's evaluation and selection.
Experienced in site development and all structures.
Experienced in mechanical equipment and piping installation.
Competent in coordinating and scheduling construction phases.
Resolve engineering problems or find solutions in consultations with engineering groups. Knowledge of mechanical manufacturing and investigation of plant production capacity.
Experienced in concrete pre-cast yards and concrete pre-cast erection.
Research Engineer experienced in the use of strain, pressure gages and accelerometers

Management and Engineering experience:

Gammon Lakes, Ocampo, Chihuahua, Mexico.
Contract Engineer, Civil and Mechanical. Directed the construction and start-up of 2 crushing and grinding circuits. A 6,000 tpd circuit to feed a leach pad and a 1,200 tpd circuit for a merrill crowe process.

Constellation Copper, Tonopah, Nevada and Lisbon Valley, Utah.
Manage contractors for the dismantling of an SX/EW copper mill and for the future re-construction of this plant at a new location.

PDX Deice-Storm Water Project-$13 millions
Prepare, review and transmit Submittals and Request for Information to Port of Portland as well as track through internal & external processing, maintain database for Submittals; Keep directories and reports current. Participate in construction meetings. Prepare construction drawings for submittals, field supervisors and for fabrication of pre-cast concrete and piping. Order materials.

Portland Bureau of Environmental Services Tanner Creek Diversion Project-$12 millions
Maintain database for Submittals; Prepare, review and transmit Submittals to City of Portland, Bureau of Environmental Services as well as track through internal & external processing. Keep directories and reports current. Prepare construction drawings for field supervisors, order materials and log ground displacement data.

Placer Dome, Newmont Mining, and Santa Fe Pacific Gold.
Construction of mineral processing plants and ore handling facilities in the U.S.A and overseas. Projects of $50 to 250 millions.
Constructed mineral processing plants, grinding circuits, flotation lines, carbon circuits, autoclave systems for oxidation of slurries, tailing ponds and leach pads
Prepared contract documents; visited and evaluated steel fabricators and material suppliers.
Responsible for all facets of the on site works, coordinated and scheduled contractors and vendors. Resolved engineering problems with engineering groups and Owners Representative.
Evaluated cost of engineering changes.
Supervised construction of leach pads and dam in Peru for gold ore leaching. Coordinated the construction activities of contractors with a workforce of approximately 400 supervisors and operators. Responsible for decisions on disposal sites, borrow pits and haul roads.

Universal Studios, Orlando, Florida
Pre-cast concrete Parking Structures, $80 millions
Checked rebar detailing and scheduled deliveries for 2 thousands tons of reinforcing steel. Responsible for QA/QC of pre-cast plant and construction surveying. Supervised reinforcing steel placement and concrete placement.

U. S. Air Force Weapons Lab, Albuquerque, NM
Conducted tests of a shock tube to study the effects of shock waves on soils and structures.
Provided written analysis and interpreted results. Designed and built modifications to the test facility to accommodate various agencies. Supervised technician crews and shop fabrication for the experiments and modifications. Performed structural, dynamic and fracture analysis to integrate new equipment to existing facility.

Phillips Petroleum, Gulf Minerals, FMC, KY, NM, WY
Project Engineer for the sinking of deep mine shafts (3,400 foot) along with decline tunnels and the construction of pumping stations. Performed extensive pressure grouting of aquifers with silica gels or cement grouts. Coordinated and supervised mining and construction operations. Responsible for all surveying, explosive rounds design, concrete formwork design and construction. Also worked as Estimator of underground projects for mining, road tunnels, hydroelectric projects and subways stations.

Work History:

Kappes Cassiday And Associates (11/2005 - 7/2006)
Reno, Nevada

Merit consultants International Inc.
Vancouver, BC
Position: Construction Superintendent (3/1/2004 to 6/2004)

Brundidge Construction Inc. (10/2001 – 12/2002)
Clackamas, OR 97015
Position: Project Engineer

Robison Construction Inc. (8/2000 – 9/2001)
Sumner, Washington Position: Project Engineer

Merit Consultants Ltd. (1989-1995)
Vancouver, BC (10/1996-3/2000)
Position: Construction/Project Engineer

A. T. CURD (1/96 to 9/96)
Glendale, CA
Senior Construction Engineer

NMERI/ University of New Mexico (1982-1986)
Albuquerque, NM
Research Engineer

Harrison Western Corporation (1975-1981)
Lakewood, Colorado.
Shaft Engineer

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 2721)

Go to Search Parameters...

Brief Description

WellSite Supervisor

Experienced process control professional skilled in both Onshore and Offshore Oil/Gas operations. Worked in the UK and overseas. A versatile team player with excellent organisational and interpersonal skills. Proven record in Construction, Commissioning and Start up projects.

Warehouse/Supply Management,/Logistics co-ordination and purchasing skills.

OBJECTIVE Seeking career opportunities in challenging environment of the upstream sector of oil and gas industry, where my skills and result oriented analytical approach can be utilized effectively for organizational profitability and personal growth.

Electronic/ Mechanical Tech

Work experience Education Additional information Skills Abilities Hobbies

I am working with Engro Chemical Pakistan Ltd., since start of 1999, as a Chemical Plant Operator at Urea Unit, and wish to join else where in the world.

Safety, Environment, Industrial Hygiene, Loss Prevention, Security Program Management

Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engineering or Operation side job

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.

Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.

Five years increasing responsibility and leadership in Power Plant, Analytical Chemistry, Mechanical Operations and Maintenance. Expert in the fields of Water Sampling , Maintenance Planning, and Record Audits

ROV Pilot Training, BOSIET, HUET. Offshore Medicals, STCW 95

Machinist,C.N.C. / Manual 20+yrs. experience

Chemical Engineer, Project and Quality-Security-Environmental Management

Qualified Geologist (Hons Applied Science) 10 years exploration experience in Soft and Hard rock Geology,( Gold and base metals) (Victoria Western Australia and Queensland experence. Also hold a Masters in Commerce Uni of NSW. Looking for a position in China as wife is from Beijing.

Bachelor of Chemical Engineering and Bachelor of Geology degrees, over 10 years field experience in the oil /gas industry around the world. Worked offshore and onshore. Valid IADC Supervisors Wellcap certificate. Vaild OPITO offshore card.

I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

All aspects of mineral processing plant construction

3 yrs Oil and gas production operator

Safety Management Diploma, Health and Safety at Work Certificate,Medic,Aviation,Military

High - educated, experienced construction engineer. 10 years construction experience in civil building, high voltage electric lines, substations. Company management, team management, consulting.

Key word : Power Plant Engineer, Boiler Operation Engineer, Boiler Maintenance Engineer, Turbine Operation Engineer, Turbine Maintenance Engineer,Field Service Engineer, Field Supervisor, Boiler Estimate Engineer, Boiler Shift Supervisor, Boiler Operator,Boiler Performance Engineer,Start up Engineer

I have done Diploma in Chemical Engineering with total experience of 8 years & about 4 years experince in Oil & Gas field.

I am working as Process Operator in Crude/Vacuum Distillation unit of Refinery and having 5.2years experience

Exploration, Prospecting,Quality Control,Mapping,Surpac Mine Planning software, survey & Autocad

Dynamic, creative, and results-driven Materials Management Professional with a total over 18 years of experience.

My qualifications include City & Guilds Chemical Plant Operation, ONC & HNC Mechanical & Production Engineering. Refinery Operations/Commissioning/Planning/Inspection and Safety roles

I am a certified electrical engineer with 15 years experience

As an, QC/ R&D Professional in Laboratory & Process areas with 17Yrs of Extensive experience in Plant operation, Chemical analysis by classical & instrumental methods in chemical, cement ,Ores , minerals, Ceramics Refractories & Metal industries ,wishing to work with the professional

Results-driven business/systems analyst with 10 years of diversified experience in the successful identification and management of high-level business development strategies and large-scale IT solutions with extensive expertise in developing critical design requirements and functional specifications

Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc

A multidiscipline Engineer with over fourteen years experience within the petrochemical, Oil and Gas industry. I have extensive hands on experience on a variety of machinery and have managed multi ethnic; multi disciplined teams on a variety of jobs. I can work to strict timescales and budgetary con

Operations, Purchasing, and Sales Manager

mining foreman and operator: 11 years experience; Mine operator Certification; Miner's Safety Training Fire and Aide Crew; Emergency Medical Technician; Experience running hydraulic excavators, motor graders, bull dozers, front end loaders, electric shovels, etc...surface mining

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.

Completion - Well Testing supv, Wireline logging engineer

HSE 6 years experience in the field of oil and gas industries, petrochemical industries :operation and construction .worked as COW ( control of work coach ) , PERCO (Permit To Work Coordinator ), safety Advisor , And Safety Inspector Able to work in Site Supervision, preparing reports, coordinati

Over Two years of experience in Petroleum Refining & Downstream process, and Chemicals in the Field of Continuous Process plant Operations as a Asst. Manager and Shift Feild Engineer, Troubleshooting of process and equipments handling, vendors co-coordinating, and Commissioning and Trunaround Exp.

Engineering

Experienced involved problem solver with more than nineteen years of progressive experience, offering significant expertise in project management, manufacturing and oil and gas accounting management, and focused on management operations and am able to continue to learn new processes and apply them.

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

Very flexible, Diverse experience. Looking for a place to excel.

I have over 10 years as a driller and derrickhand

Experience in pipeline, Power Plat Installation

Technical Writing with 15 Years of Experience in the UAE

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Chief Enineer, Limited, Oceans, Unlimited HP

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out