Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #5131
next resume »»
CONTACT INFORMATION:
View contact information...
Objective To obtain a challenging position as an air separation plant operator, with potential for advancement.
Work experience „X 2002 - Present M.G. Industries Waxahachie, TX
Plant Operator
* Daily operation of ASU, start up, shut down. Monitor purities during all stages of operation including the loading of product into bulk transports. Medical release specialist and batch release specialist. Daily monitoring of cooling tower. Perform PM's on all equipment within the plant. Transferring of product to back up storage tanks. Data entry of production numbers and daily review of product purities and lot numbers of product shipped. Calibration of analyzers. ISO 9000 trained. Current in cGMP¡¦s.
1999 - 2002 Roberts Oxygen Co. Gaithersburg, MD
Cylinder Fill Plant Operator
* Daily filling of compressed gas cylinders. Member of Quality team. Medical release as well as batch / lot number assignment. Trained employees on procedures for filling of medical and commercial gas mixtures using gravimetric filling. Managed and distributed labels for compressed gas cylinders as well as liquid dewars. Managed daily log of bulk shipments received and corresponding lot numbers. Performed routine calibration of all product release analyzers.
1992 - 1999 United States Marine Corps MCAS Kaneohe Bay, HI
Cryogenic Operator
Cryogenic shop supervisor. Supervised use, repair, and maintenance of cryogenic gear used by Marine Corps. Member of the quality team, assigned title of collateral duty inspector. Instructor for Marine Corps base Hawaii for cryogenic gear use and operation. Calibration program monitor. Technical publication program monitor. Monitored and troubleshoot the production, repair, and maintenance of the GGU9-M self contained (PSA) O2 / N2 generator. Supported five flying squadrons and numerous medical facilities aboard MCAS Kaneohe Bay.
Education „X 1990 Fredericksburg High School Fredericksburg, TX
* 1992 -1999 United States Marine Corps
* Aviation Support Equipment Course, Millington, TN
* Expeditionary Oxygen / Nitrogen System 16000 hour Maintenance Course, Cherry Point, NC
* Expeditionary Oxygen / Nitrogen System Intermediate Maintenance Course, Cherry Point, NC
* Liquid / Gaseous Oxygen / Nitrogen Trailers Intermediate Maintenance Course, Jacksonville, FL
* Aircraft and Support Equipment Basic Weld Certification Course, Cherry Point, NC
* Aviators Breathing Oxygen Contaminate Analyzer 40 Hour Course, Lakehurst, NJ
Accreditations Medical Product Release Specialist and Batch Release Specialist for M.G. Industries.
Quality Assurance Representative for Roberts Oxygen Co.
Tool Control Program Manager (USMC)
Calibration Program Manager (USMC)
Technical Publication Manager (USMC)
Licensing Supervisor (USMC)
Awards received Naval Achievement Award for implementing servicing schedule for Marine Corps Base Hawaii, and for cost saving gaseous oxygen servicing for C-20 Squadron, saving the Marine Corps over $16,000 annually.
References References available upon request.
Computer Skills Windows 3.x
Windows 95
Windows 98
Windows NT
Lotus Approach, Smart Suite, Word, Ami pro
Microsoft Excel
Microsoft Office
Microsoft Word
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1251 to 1300 of 2726)
Go to Search Parameters...
Brief Description
Precommissioning, commissioning, operation process engineer
Two years of oilfield experience as floorhand, relief motorman and relief derrickman
5 years Exp in Artificial lift design and operations , production optimization , equipments sales and proposals
19 years of experience as a Camp / Accommodation-Facilities Management (Staff Welfare Operation and Maintenance) in Oil & Gas, EPCC, Company (Road & Bridge, Electro-Mechanical Contractor.
6 years of experience as Drilling Engineer for Major Operator company in Denmark (North Sea Project) and as Drilling Supervisor for operator company in Turkmenistan.
Planner, scheduler, Teamwork, time manangement, lead, excellent communnication
Twenty five years experience in ten manufacturing sites with four integrated major and three independent oil companies. Responsibilities include Unit Operator through Refinery Manager, and span operations, maintenance and technical departments. Steady promotion and career growth.
LPG,NAPHTHA,FUEL OIL, AMMONIA STORAGE TERMINAL AND UNLOADING FROM SHIP IN CALTEX-SPIC LIMITED,INDIA- LPG,AMMONIA STORAGE TERMINAL. UNLOADING FROM THE VESSEL USING RMCA UNLOADING ARM.
I'm Algerian, 37 years old 15 years experience in oil and gas field
Three Years Diploma holder in Mechanical with 5-years experience in an Oil & Gas E&P Inc. as "PRODUCTION OPERATOR", Seeking prospect to utilize my knowledge, experience, skills and exceptional ability for the post of "PRODUCTION/FIELD/PROCESS/FACILITY OPERATOR" in an Oil and Gas organization.
SAP knowledge,Material engineer,controller.Thorough knowlege of Isometric drawing,fabrication,material manual,and inventory.oil and gas field,gulf and offshore experience.
Monitor Equipments and Products to ensure the Plant runs smoothly
I have completed my graduation in mechanical engineering and parallel to that i did a diploma in industrial safety ( distance mode) . I am looking for a job in oil field as a trainee graduate engineer in the drilling department to begin my career as a drilling engineer
An MBA Finance with strong knowledge of Hedge Accounting and Derivatives valuations and experience with a Big 4 and Financial Software company.
Crawler Crane Operator
Air Separation Operator with 10+ years in the cryogenic field. Started in the Marine Corps and now working for a major bulk gas supplier, operating a 400 ton liquifier.
Fully qualified analytical chemist. 4 1/2 years experience in the offshore industry on a FPSO, offshore Angola. Recently promoted to supervisor.
I already have an expirience as a M/LWD Field Engineer during my internship program.
Over 6+ years experience in Content Management. Professional Proofreading, Editing, Writing, Documentation using various editing tools as Framemaker, Latex, MS-Word.
: 25 Years experience inLicensor selection for SRU / DCU/ HCU /FCCU/ DHDT/CRU units
I am petroleum engineer having more than six years working experience in oil and gas exploration and production company
HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection
Hard working, Honest, Reliable
My major responsibilities are Core Photography, Core Slabbing ,Core reservation and Storage Services ,Lithology rock description ,Real time monitoring of drilling parameters, preparation of formation evaluation logs, identification and classification of samples
Offshore Installation Manager with 25 years experience in the Oli and Gas industry
Development of Lab analysis procedure using ASTM, APHA, UOP & Shell reference methods to minimize the cost.
Deepwater Completions Consultant
5 years experience in obtaining Leases, title searching, etc...
Has the experience and skills required to manage, supervise, handle and monitor all job related aspects of Safety, Health and Environmental protection. Capable and knowledgeable in the process, development and application of different Safety measures that are vital in Offshore & Marine Safety,
Panel Operator or Senior Operator
Experienced New Technology Key Account Manager
PLC,SCADA,HMI/MMI,DCS,Temperature Instruments
Drilling Engineer with experience in drilling and completions operations in Saudi Arabia and South America (Exploratory wells, H2S and gas wells, directional and vertical wells up to 17000 ft)
I have thirty eight (38) years in the oil and gas industry as a Landman. During my career I have worked in over thirty (30) states here in the United States. At this point in my career I would consider myself a "Senior Landman."
Production plant operator
Supervisor, Health, Safety and Environmental. Responsibilities to include: asset management; quality, health and safety initiatives; implementing innovative solutions to practical problems; motivating and development of personnel.
MSc. Eng. (Canada); 17 years experience; Photogrammetry, Surveying, Mapping (all production aspects), GIS (ArcGIS/ArcSDE, MGDM); Production/Project Management, Software Development; System Design, Data Integration, Support, Training, Research, Geomatics
Offshore Experienced
I had more than 12 years experience in field of Instrumentation, through Maintenance, Project Engineering, Construction, Commissioning and Start up of Oil and Gas and Petrochemical Plant. (Off Shore and On Shore)
Experienced Refinery Operator
I have experiences gas plant, good skill, attitude and knowledge about the production process in Gas Company. I had experiences with acid gas (CO2 & H2S) removal by potassium carbonate absorption and MDEA absorption system, Regeneration absorbent, Dehydration unit, Gas chilling & Liquefaction unit.
M.TECH. in Applied Geophysics, Acquisition,Processing & Interpretation of Seismic data, 3-d modelling of subsurface,petrophysical interpretation,Attribute extraction,synthetic generation, Software Testing.
Advanced Process Control and Optimization: Multivariable Control Modeling, Inferential Modeling, APC Online tuning and commissioning and step testing. Product Honeywell Profit Suite. Process experience: VDU, heater pass balance and MSDW/HDT
Petroleum Engineering from Pune University/Sub Surface Open Hole Data Digitizer and Processor/Well testing, Sand filtration, Slickline/Production Technologist
I'm Geophysicist with 3 years field experience
11 years experienced field QC/Geophysicist, polish citizen, MSc diploma in physics, 2D and 3D land seismic prospect design, infield data processing - up to the time migrated 3D volume, shallow refraction and up hole programs, QA/QC of all aspects of seismic data acquisition.
Total Experience : Eleven years in Refinery & Petro-Chemical Industry
Dear sir, I have experience of unit start ups, shutdowns and commissioning. I have eleven years experience as a petrochemical operator. I have recently been working for a catalyst company which has included installing trays and filters etc.
One year of site investigation experience including gas & water monitoring, soil/water sampling/testing, drilling supervision (Rotary, Shell & Auger, Window and Non-window sampling), trial pit supervision, logging (BS: 5930). Also factual and interpretative report writing.
Graduated Professional Chemical Engineer I have many years project engineering experience and this in a number of positions and countries.
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
[ 26 ]
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Operations;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com