Resume - B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nucl...

Misco Jobs

Resume #56711

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
The main objective of my career is to excel in the industry and strive towards excellence.
SUMMARY:
* B-Tech (Mechanical Engineering) with Honors an aggregate of 73.4% from N.I.T. kurukshetra (Haryana).
* Total work experience of 3 years in Nuclear Power Corporation of India Limited.
EXPERIENCE:
* Presently working as Scientific Officer-C in Nuclear Power Corporation of India Limited (Department of Atomic Energy).
Duration: Since Sep 2003.
Designation: Scientific Officer-C.
Company profile:
Nuclear Power Corporation of India limited is a public sector enterprise under the department of atomic energy (DAE), Government of India. It was incorporated in September 1987 as a public limited company under the companies' act 1956 with the objective of operating the atomic power station and implementing the atomic power projects for generation of electricity in pursuance of schemes and programs of the Government of India under atomic energy act. The present total nuclear power capacity is 3270Mwe.

AREA OF EXPERIENCE:
1. Power production, planning and control of process carried out in the Plant.
(One year experience in above area in operating unit of Rajasthan Atomic Power Station-3&4)
Job profile:
* To control the power production related activities are going smoothly, there should be no transient in plant parameters.
* To make proper planning to carry out various testing of safety related equipments and system by following ALARA and STAR principle as per AERB
* To motivate the subordinates towards their duties and responsibilities so as to increase the overall efficiency of the plant.
* Radiological dose management for the Operators and supervisors so that radiation dose of each person should be as per international standards.

2. COMMISSIONING OF SYSTEMS

{Experience in above area, since Aug-05, in Tarapur Atomic Power Project (now Station)-3&4 and RAPP-5&6)
SYSTEM COMMISSIONED:
* VENTILLATION SYSTEM AND TURBINE-AUXILIARY SYSTEM IN TARAPUR ATOMIC POWER PROJECT-3&4
* WATER SYSTEM (IN PROGRESS) IN RAPP-5&6

Job profile:
* To check installation of equipments and related piping and power supply are as per flow sheets and documents
* To check performance of equipments by running the equipment for prescribed period
* To check various parameters (operational) and compare it with design and operating limits
* To check related logics

SOFTWARE EXPOSURE:

Operating system worked on: MS-DOS.Windows 98, 2000, XP
High-level language: C, C++, Fotron

ACHIEVEMENTS:

* Gate qualified in 2002 with 90.28 percentile
* Gate qualified in 2003 with 99.66 percentile
* Cleared BARC interview in 2003..

extra information: i am citizen of india and currently working for nuclear power corporation of india ltd, an interprises of govt. of india.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 2461)

Go to Search Parameters...

Brief Description

I am skilled in providing/developing HSE advice, HSE policies, accident/incident investigations, safety inspections, HSE training, Risk Assessments, emergency response/ evacuation procedures. I have obtained the National NEBOSH Certification in UK and the NISP - HSE certification in Nigeria

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Management, business, trading, oil and gas, adminstration, HR, petrolium

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

I'm a well service / well intervention Supervisor

Open Crane Operator and Advanced Rigger

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

analyst

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Worked in chemical Industry for 14 years.

P&PCM, MBA, B.Arch

I am qualified as an operator for monitoring pressure, flow, temperature, gas, and liquid pipeline operations including pipeline, wells, refineries, and plants.

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

Operations Supervisor

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

10 Years Working As A Cartographer For QARUN Petroleum Company

Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Electration Engineer Trainee

Contract Administrator, Paralegal-PC/Microsoft Proficient

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

A dynamic professional with over 10 year of experience in Project Planning, Cost Control, Estimation, Quantity Surveying, Co-ordination and execution of MEI&P Projects. Proficient in Primavera Project Planner V3.1 & 6.0, Office XP/2000 and In-house soft wares for Client / Sub-contractor Billing

Electrical Engineer

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

For the last five years I have been employed as a Research Technologist in a hydrocarbon laboratory. My background encompasses oil and gas analysis, FDA & cGMP quality control, as well as other types of analysis.

Bachelor degree in Economics(First Class Honours), Associate of the Institute of Certified Cost Management of Nigeria, Associate of the Institute of Certified Economists of Nigeria, National Diploma in Statistics(Distinction)

Desired employment / Occupational field Financial & Economic / Project Analyst

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

20 + Years Experienced Heavy Equipment Operator / Haul-Truck Driver Supervisor to Relocate Anywhere. I desire to work for a well established yet growing company.

I am a young energetic Mechanical Engineer with hands-on experience in Upstream Oil and Gas industries and Masters degree in Project Management from National University of Singapore. I came to Singapore to gain the best of knowledge of the industry and the field exposure so as to increase my profess

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Bachelor’s Degree in Mining Engineering, Faculty: Petroleum Geology and Geophysics, and Chicago Oakton Community College Faculty: Computer Science.

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

I am a holder of first class honours in Mining Engineering from UMat, Ghana,. Knowledgeable in the Microsoft Office Suite (Microsoft Word, Excel, PowerPoint, Access). I am also familiar with some General Mining Packages such as; SURPAC AutoCAD, and WHITTLE. I am a fast learner with the zeal to learn

Field sales representative collection/ credit investigation drafting edge

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out