Resume - Petroleum Engineer, 4 years industry experience in Logging, reservoir and drilli...

Misco Jobs

Resume #59494

CONTACT INFORMATION:
View contact information...

2007 – 2006 M-I SWACO, A Smith/Schlumberger Company
(Present – Jul) Drilling Fluids Specialist/Sales Engineer
* Provide complete Drilling Fluids Solutions for oil company (client).
* Recommend and supervise daily fluids treatment for successful drilling activities for oil and gas drilling.
* Support in Drilling Fluids design and testing in field and laboratory.
* Provide Technical support in drilling fluids, minimize cost to total operating with proper implementation of drilling fluids products for best results.
* Experience in Drilling Fluids Waste Management and Solids Removal/Control.
* Implementation of Solids control equipment, shakers, de-gasser, desander, mud cleaner, centrifuges for volume accounting.

2006 - 2005 Halliburton Energy Services
(Mar – Apr) Associate Field Professional, Open-Hole Wireline Logging and Perforation
* Perform open-hole logging service for client; make well log of formations.
* Implement logging service to operating company at location and complete field professionals duties for equipment preparation, calibration and utilization at oil and gas well sites. Ensure well log quality.
* Check logging equipment prior to logging and after logging operations, either on remote oil and gas locations or in the shop location.
* Preparation of logging equipment for jobs and follow-up of equipment readiness. Maintain logging tools.
* Rigging up and down service line equipment on location. Practice safety procedures during jobs and at all times.
* Continuous Interaction with Client Company towards every job.

2005 – 2004 Selman & Associates
(Apr – May) Field Geologist
* Interpret formation geology from rock cuttings for finding oil and gas zones.
* Conduct analysis of rock samples for hydrocarbon detection.
* Prepare logs, communicate to clients about hydrocarbon areas and lithology.
* Using software and hardware tools with chemical tests to perform extensive formation study.
* Monitor daily drilling activity, work areas in state of Texas and Wyoming

2004 – 2001 New Mexico Institute of Mining & Technology, USA
(Jan – Aug) Graduate Research Assistant, Petroleum Department
* Performed reservoir simulation to aid decisions in developing future infill wells.
* Used Schlumberger's Eclipse simulation package to develop reservoir simulator for tight gas reservoirs in San Juan basin, NM.
* Collected and examined production / well data and implemented into reservoir model construction.
* Analyzed geological data and used reservoir characterization tools to build simulation model.
* Digitized and interpreted well logs (open / cased hole).
* Production forecasting and reserves estimation.

2000 – 1999 Oil and Natural Gas Corporation (ONGC), Gujarat, India
(Jan 00') Reservoir Simulation, Institute of Reservoir Studies (IRS)
* Concepts, types and development of reservoir simulation along with using IMEX simulator.
* Introduced and later implemented functionality of Eclipse simulator.
(Jun – Jul 99') Field Intern, Well Logging Services (WLS)
* Successfully worked with logging teams to carry out open and cased hole logging operations.
* Logging jobs executed with Halliburton's Excel – 2000 well logging truck.
(Dec 99') Field Intern, Agni Bhavan.
* Worked under supervision in oil field operations.
* Studied laboratory process in drilling, reservoir, logging and enhanced oil recovery

EDUCATION

New Mexico Institute of Mining & Technology, USA
MS Petroleum Engineering 2004, Overall GPA – 3.90/4.00

Nowrosjee Wadia College, University of Pune, India
Masters of Science in Petroleum Technology (Applied) 2000, Result – First Class

Fergusson College, University of Pune, India
Bachelors of Science in Geology 1997, Result – First Class

SOFTWARE & TECHNOLOGY SKILLS

- Halliburton CLASS v5.8 logging software
- Open Hole Logging Tools - Gamma, Resistivity, Density, Neutron, Sonic
- Reservoir simulation packages: Eclipse® 2001A, Merlin and IMEX
- Well log analysis tools: LESA, NeuroLog, Logit ®, Log plot 2003
- Drilling Fluids Packages: One-Trax, PC-MOD, Virtual Hydraulics.
- GIS tools: Arc view 3.2a, Arc Explorer
- Petroleum database management: IHS Energy Power Tools 5.0a, Dwight's PI
- Reservoir characterization tools: Gviz, wingslib, Grid Stat
- Microsoft tools: Excel, Word, PowerPoint, Access and Outlook
- Programming software's: Object oriented programming in java and oracle Jdeveloper 3.0
- Operating systems: Windows NT/XP, Mac OS X/Unix/Linux.
- PC Hardware and troubleshooting

HONORS & ACTIVITIES

* Awarded 'Outstanding Graduate Student' by New Mexico Tech, Dept of Petroleum Engineering, SPE Student Chapter (2002-03)
* Vice President, New Mexico Tech SPE student chapter (2002-03)
* Placement coordinator of M.Sc Petroleum Technology (Applied)
* Member, Society of Petroleum Engineers (SPE)
* Member, American Association of Petroleum Geologist (AAPG).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 2494)

Go to Search Parameters...

Brief Description

To pursue a career that will give me the opportunity to fulfill my ambition, acquire the training and experience necessary for professional and personal growth, to be able to share my competent, skills, knowledge, hard work and discipline in this company.

Senior Professional Geologist

Business Development Executive with over 7 years of experience

Attended Service Training for Stack/Process Gas Analysers at M/s SICK Maihak AG Hamburg,Germany (5.09.05 to 9.09.05) for Models S700 Series .(NDIR,Paramagnetic,Thermor,Finor)

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

At the present time, I am working as assistant unit controller at PT. PowerGen Jawa Timur ( Private Power Project Phase II Coal Fired Thermal Power Plant 2 x 610 MW ).

I am a Quality Health and Safety Management Consultant with more than 16 years experience in Middle East . I am a Lead Auditor for ISO9001:2000; ISO14001:2004 and OHSAS18001:2007. Apart from this I am NEBOSH-UK Certified HSE Advisor . Has rich exerience in evaluating Management systems

Highly Skilled Civil Engineer

Training/HR Professional, Accredited Vocational Assessor with experience in the areas of Performance Consultancy, Personnel Development, Recruitment, Competence Based (NVQ) Training Systems and Certification, Training Needs Analysis and Evaluation within Oil/Gas, Nuclear, Defense and Railway Industr

manager/worhop/service/electrical

Senior management professional with extensive experience in Management & Operations of IT & Telecom Networked Infrastructure and Systems, Managed Services, Information Security, Process Modeling, SAP Implementation, Consultancy etc across industry segments.

MWD/LWD Field Service Engineer (4 yrs), Drill Bits Evaluation & Sales Engineer (2 yrs)

Technical assistance, as control system field engineer (speedtronic MKV specialist), during installation of two Gas Turbine model PGT-25-DLE compressor driving. Training, as control system field engineer during performance test of Steam Turbines and Centrifugal compressors also training course on Ga

I am Electronics and Communication Engineer and I have more than Three and half years experience in marketing and business development in Dubai and Indian subcontinent.

4 years experience in Land Logistics and Petroleum Transportation Handling

I have been in the construction industry for 16 years. 7 years in in the Drywall trade, all phases, including owning a Drywall Company. I have framed houses, poured concrete, and been a general laborer. Most recently I have been in the glass industry. Estimating, ordering, installing and managing.

Project Manager, BPO Mobilization Lead, SAP Consultant, ERP tool Administrator

IT/Business/Analytical professional with experience in the Gas, Safety, and Welding industries as well and inventory planning and forecasting in the auto industry.

Amos RAST Database builder, PMS Engineer, Marine Engineer Liscensed, Support, Maintenance, Planning

I am an experienced medic, with some 16 years offshore experience in the offshore Oil & Gas industry, both on floating and fixed installations in the UK sector of the North Sea, ROV construction and support and, most recently, offshore wind farm construction vessels off the UK coast.

Offshore/abroad experience

Safety & Environmental Specialist with excellent knowledge and experience. Please refer my resume with complete details available.

Experienced Ops Engineer

Petroleum Engineer, 4 years industry experience in Logging, reservoir and drilling fluids.

Performing the day-to-day maintenance activities of the oil and gas plants in coordination with DCS Technicians and Sr technicians.

Programming VB6, ASP,COBOL,Oracle,MS SQL server,MS Access, Lotus Notes R5,

Senior Process Operator

Well site supervisor with southeastern New Mexico/West Texas drilling experience. Experienced with PDC bits, High pressure, Drilling with brine and weighted mud, Lost circulation/ seepage issues, Have current well control card. I am a safety leader and apply my knowledge to every task.

Electrical Engineer with 16 years experience in the field of Electrical & Instrumentation. Engineering and Project Management

„« Project Erection & commissioning in Pidilite Industries Ltd, Vapi ¡VGujarat having FOXBORO DCS (Micro I/A Series ) as control system.

CV for AutoCAD Operator, Document Controller & Technical Assistant

Yokogawa DCS & Instrumentation professional with over 13.11 years of Experience entailing achievements in Erection, Installation, commissioning & Maintenance of DCS & Field instrumentation systems

High School Graduate- Entry Level

Graduate in chemical engineering having 11 years of expereince in Projects and Production.In depth knowledge in Sulphuric and Phosphoric acid technology for production and implementation of projects.Having overseas experience for handling project activities.

A versatile, adaptable and confident person who has gathered a range of knowledge and skills through practical experience in a range of different sorts of jobs.

Deep knowledge of refinery process, engineering development and construction expertise. I have experience as Plant and Project engineer in the direct coordination of the execution of the work during start-up, commissioning and operation stage, control of contracts, administration and engineering.

MDT field specialist

Bachelor Degree & especial training in Plant Operation from Institute of Engineering & Technology (National Fertilizer Corporation) Pakistan

Worked in Honeywell Automation india Ltd as Engineer. Trained in Honeywell Automation India Ltd for DCS EXP R210,SCADA,PLC

Field Engineer , 2 years experience with Schlumberger Wireline.

I have 2 1/2 years experience in the pumping industry working as an acid and cement pumper operator and 4 1/2 years experience as an acid and cement supervisor. I am knowledgeable in acidizing primary and remedial cementing. I am looking forward to furthering my career internationally.

Diverse technical back ground including hydraulic power plant technician ,fresh water analyst, pump mechanic, maintenance coordinator, maintenance mechanic, and valve installation repair

Instrumentation

Ability to identify the client’s needs, to provide an intervention of quality, to encourage human development and to train junior consultants. The developement of my communication and natural leadership skills help me to innovate and to implement new ideas.

I attended German Malaysian Institute & Malaysia Komax Institute. Besides I attended Helicopter underwater Escape Training, Safety Survival Course for nature of work purposes.

Great Technical and problem solving skills

I am a Chemical Engineering graduate having 17+ years experience in the field of Safety, Occupational Health &Environment.

Mechanical design engineer (Prepare Design & Development plan for new product)Bachelor of Engineering (mechanical)

38 years old, Civil Chemical Engineer 4 years of experience in operational activities in Chemical Mining Industry, including leaching process management, SX and special chemical process.

LOOKING FOR JOB IN ANY POSITION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out