Resume - Instrumentation

Misco Jobs

Resume #59964

CONTACT INFORMATION:
View contact information...

DATE OF BIRTH: 4/3/1964
MARITAL STATUS: Married.
LANGUAGE KNOWN: English, Hindi, & Malayalam.
DRIVING LICENSE NO.: Yes
GENERAL EDUCATION: SSLC, BA Arts
TECHNICIAL: Multi Discipline

EDUCATION: Diploma in Instrumentation, Electronics, Electrical. (6YEARS)
COMPUTER LITERACY: MS OFFICE, MS WORD, MSEXCEL, WINDOWS 95,98,2000 ETC.
TRAINING
(1) Suvimac II and CCC from GE Nuovo Pignone.
(2) Operation of survival capsule of Survival Systems.
(3) Programming and Maintenance of SLC 500 and PLC 5 series of controllers of Allen Bradley Rockwell International
(4) H2S and Respiratory protection, Practical Approach to Operation, T2 training for safety system of OSI. Texas, USA.
(5) Survival at sea training from Maritime Training Institute of Shipping Corporation of India. Bombay.
Award:-
Special award from Conocophillips Syria CSDGL project

WORK EXPERINECE
PRESENT EMPLOYER: OIL & GAS EXPLORING COMPANY KAZAKHSTAN
DEPARTMENT: INSTRUMENTATION
DESIGNATION: INSTRUMENTATION HEAD
JOB PROFILE: More than 17 YEARS OF EXPERIENCE IN ON/OFFSHORE
Presently I am working with OIL & GAS Exploring COMPANY KAZAKHSTAN
AS AN INSTRUMENTATION HEAD. Our Project is over. Now I am ready to join your organization
Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems (Total Instrumentation). project is over
Plant Design (Utilities, Mechanical, Piping, Cryogenic Plants, Water Injection Plants, Facilities, Revamping & Upgrading Plants).Production System Design (Oil & Gas Processes & Facilities, Life Cycle and Production System Engineering).
Process Engineering (Process Design, Oil & Gas Process Treatment). Project Management & Project Feasibility.
(1) I had worked with oil & Gas Company on, AS AN SENIOR INSTRUMENTATION SPECIALIST/SUPERVISOR ON rotational basis of 28/28 ON/OFF. My project commissioning in Yemen has been completed. Jan 2006 to February2007
(2) Specialist (Instrumentation) for CONOCO Syria Dez Gas Ltd, Syria rotational basis of 28/28 which is a joint venture of CONOCOPHILLIPS USA &Total Fina Elf France and Syrian Petroleum Corporation from Jan 1999 to Dec 2005.
(3) Senior Instrument Technician for ONGC Oil & Gas Corporation, Through GEO Services at SHP oil & gas production complex on rotational basis of 28/28, Bombay high from January 1993 to November 2000.
(4) Senior Instrument Technician for GASCO from February 1992 to December 1992.
(5) Instrument Technician for QGPC Qatar from January1991 to December 1991.
(6) Instrument Technician for Aramco KSA from June 1989 to November 1990.
EXPERIENCE
(1) 10 years in offshore oil & gas platforms including commissioning and maintenance.
(2) 7 years in petroleum & Gas refining facility including commissioning and maintenance
(3) Total more than 17 years of process instrumentation.
Upstream Business, Downstream
I have experience in Upstream, with operations that include the exploration, development and production of crude oil and natural gas, LPG, LNG etc. All instruments related to well head operation, Xmas tree's i.e. SSV, SSV, remote operated systems like RTU, control panel, and production process, refining etc.
Relevant experience in Installation, Commissioning, Start up, Operation and Maintenance at OFFSHORE Production Platforms, Oil & Gas sectors etc. Experience Including Xmas Trees (oil wells), Injectors, Separation, Water Injection, Gas Injection, Gas Compression and Storage.
I have Multi Task Talented discipline experience & Multi-skilled OFFSHORE roles on Instrumentation, DCS, Electronics, Electrical, Mechanical, and Operation.
I have hand some experience in CMMS (computerized maintenance management software systems.
Mechanical Instruments:
All type of control valves, Safety valves, Relief valves, Bleed valves, SSV, SSSV, Smith positive displacement type flow metersWith Autocon panel operation,
Instrumentation:
All type of Instruments calibrations likes Flow, Level, Temperature, Pressure, etc
Rotating equipments:
Involved in overhauling of all type compressors, turbines, etc
Operation:
Starting of compressors & Turbine related activities.
Nature of work
CONOCOPHILLIPS SYRIA DEZ GAS LTD, SYRIA.

Rotating assignment - 4 weeks On/Off. Planning and carrying out routine maintenance and trouble shooting of the instruments and systems used in the remote compressor stations which is equipped with GSI compressors controlled by Honeywell PlantScape. Also having hands on experience on Nuovo Pignone gas turbines, which are used for gas compression. Well versed with the control System of turbines Suvimac II which includes Bentley Nevada 3500 Series Vibration Monitoring system and CCC Antisurge control Systems.
Independently handling the Honeywell PlantScape DCS/SCADA systems, LACT (Custody transfer system) and doing monthly validation of metering system, which include Omni, flow computers, Daniel chromatograph, Honeywell Smart Transmitters and Solartron densitometer. Taking care of Laboratory chromatograph of Varian and other lab equipments.
Able to do programming of Allen Bradley and Modicon PLCs. Carrying out the modifications of Control schemes and display pages of the DCS/SCADA according to operational requirements.
AT ONGC OIL & GAS PRODUCTION COMPLEX, BOMBAY HIGH OFF SHORE LTD.

Rotating assignment - 4 weeks On/Off, looking after the maintenance of instruments and systems of all unmanned platforms. The responsibility includes planning and carrying out routine maintenance and trouble shooting Well head shut down panels of Haven automation/ Autocon/ Ruelco/ Baker/ and Mid south controls, Fire water pump control panel, Toxic & Combustible gas detection systems of Sieger/ General monitors/ Crowcon, Inst. air compressor control panels, and Test separator. Well versed in operation of 2500 series DANIEL FLOW COMPUTERS used for calculating quantities of oil, water, and gas during testing of wells. Also familiar with the programming of SEMR unit of Geophysical Research Corporation, USA which is used for measuring and storing down hole pressure and temperature of wells Also performing the routine maintenance of various field instruments at the production complex including calibration, trouble shooting and loop checking. The production complex is having two trains of separators, oil treaters, hydrocyclones, water skimmers for oil and water separation and glycol de-hydration system, amine sweetening for gas conditioning. Well versed in the operation and maintenance of SOLAR TURBINES TAURUS - 60, which are used for, power generation, MARS - 100 which drives the 3-stage rotary gas compressor. Familiar with the control system of the turbines 'TURBOTRONIC' which uses the Allen Bradley 500 series PLC including Bentley Nevada vibration monitoring system. Also worked on RUSTON GAS TURBINES - 5000 series that are used for power generation of power in SHP Complex. Having hands on experience on the control system of the turbine 'RUSTRONIC'. Having good knowledge of Relay control panel which includes GE Fanuc PLC, Tulsa Heat medium heater which is controlled by Allen Bradley PLC, LACT unit used for proving the Sales meters (PD Meters), OMNI FLOW COMPUTER used for oil & gas measurements, Daniel 2350 series gas chromatograph, Air Dyne Inst. air compressor, Fire water Pump control panels, and Fire & Gas panels of Crowcon / Detection Instruments. Hands on experience with software's including LM90, IPDS, RSLogix5, RSLogix500, RSLinx, Omnicom, Omniview, Mon and Cimplicity used for SCADA. Familiar with P&I Drawing, Relay logic both electric and pneumatic, SAFE charts, and Loops diagrams. Knowledge of utility equipments likes HVAC, water maker. Also worked on the ACBs and MCCs during training in Electrical department. Well versed with safety standards compliant with the offshore working conditions including the usage of safety equipment. Played an active role in the hook up & commissioning of well head platforms of ONGC at Bombay High Offshore and Bombay High Modification Project.

Commissioned the test separators of SHG. Other responsibilities were calibration of instruments, preparation of calibration reports and getting it signed from higher authorities, loop checking, installation and commissioning of calibrated instruments, and preparing the job schedule for the next day.
During my service for Baker Hughes & Serk Baker for their up grade project of water injection systems in WIN & WIS Platforms, I was assigned to perform the calibration, refurbishment and commissioning of the instruments used in the system.

For GASCO Ruwais
Rotating assignment - 3 Month On/One Month Off, looking after the maintenance of instruments and systems worked as a Senior Instrument Technician at GASCO maintenance project. Experienced in the calibration and routine maintenance of different types of control Instruments in a LNG plant. Familiar with the calibration using SMART and HART field communicators. Knowledge in Triconex (TMR) Shutdown logic and Modicon, Allen-Bradley PLC systems, and HIPS for shut down logics. Worked on control instruments for GE gas compressors, Crowcon fire Control panel equipped with SLAEM panel and FM 200. Worked on control instruments and Burner management system of Water tube boilers of Stork Kettles Worked in the SRU and AGR related control instruments of Sulphur and Liquid incinerators, reaction furnace and air blowers. Worked on flow meters of Coriolisis type (Rosemount Micro motion, Smith) Vertex (shedder) flow meters. Pressure and Temperature transmitters, control valves (Valtek), IR Remote control MOVs (Rotork), and Valve positioners of Valtek logix 1000. Various methods of level gauging like, Leveltroll (Displacer), DP type (wet and dry leg), Radar and purge type. Responsibility also covers the routine check up of online analyzers includes, Gas Chromatograph of Yokogawa GC 1000, Siemens Maxim GC, Panametrics Moisture analyzers, Total vapour pressure analyzers of Precision scientific, Density analyzers of Micro motion and Solartron. H2S Photometry analyzers, H2S /SO2 (Tail Gas) ratio analyzer, Zirconia flue gas O2 analyzer of Ametek and Servomex. Hydrocarbon, O2 and CO2 analyzers of Teledyne, Rosemount-pH and conductivity analyzers etc. My responsibilities also includes in getting permit for work, Inter lock bypassing where necessary and getting spare parts and maintain log book supporting to SAP software

For QGPC Qatar
I had been worked as an Instrument Technician, for installation, loop check, functional test and Logic test of INFI90 Bailey DCS System. Pre-commissioning system by Simulating all permissive for satisfied the logic and inter lock. I worked myself up to functional cards used for I/O, analog and digital modules I had been familiar in Yokogawa excel, and Honeywell. Systems. I am familiar in Allen-Bradley, Triconic PLC systems, to force the digital inputs. Modify (Add & Remove) the ladder logic and commends. Glanding, Tubing, Planning for field modification. Installation, Calibration, loop checking commissioning as per production and other responsible supervisor. Have good experience in well head actuators, spring loaded actuators control valves Samplers, smart transmitters, electronic & pneumatic controllers
For Aramco KSA
Servicing of electronic and pneumatic for flow, pressure, level, temperature, transmitters, switches, control valves, shutdown valves MOV's, vibration instruments, Have good experience in well head actuators, spring loaded actuators control valves Samplers, smart transmitters, electronic & pneumatic controllers. fire and gas safety instruments. I have experience in installation of instruments, cable glanding termination and tubing, as per FMR with safety standards. Preparing daily maintenance record and equipment history. Planning, preparation, and carryout Shutdown jobs. Maintaining the record for instrument at store. Maintaining the record for instrument history

SYSTEMS AND INSTRUMENTS WORKED ON
Competency Item Comments
Siemens/Moore APACS & QUADLOG DCS System SUVIMAC II +
Flow Computers, OMNI, DANIEL 3000 & 6000, Daniel 2500
HONEYWELL DCS System, SCADA, ESD System,Bailey Infi90DCS PLANTSCAPE, FSC (fail safe controller)
Allen-Bradley PLC Systems:- 5/20C, 5/20, 5/30, SLC 5/01, 5/02, 5/03 PLc 5/40C, & SLC 150
OPERATING SOFTWARES: - GC: MON, PLC
Flow Computer: OMNIVIEW & OMNICOM, SCADA Lm90, RSLogix5, 500, 5000 & RSLinx
CIMPLICITY, ROClink, Insite
GE PLC Systems, GE FANUC 90/70, 90/30, 505 SeriesPLC's SIEMENS
MAITANANCE SOFTWARE: - MAXIMO, Manta, SAP, Bench mate etc
Other PLC Systems (List) MODICON
GAS CHROMATOGRAPH DANIEL 2350, VARIAN 3600
Solar Turbotronic Turbine Controls MARS, TB500 Turbine Controls Ruston
Solar Relay Turbine Controls SATTELITE
GE Speedtronic Turbine Controls (Mk II, Mk VI, etc.) MARK II,Frame III & VI, York
Compressor Anti-surge Controls (List manufacturer) CCC, HONEYWELL
Bentley-Nevada vibration monitoring(Machinery Protection System) 3500, 3300, 7200
Fire detection and suppression systems DET-TRONIC, SEIGER
Fire & Gas detection and ESD systems: - GENERAL MONITORS,
CROWCON, DET-TRONIC, SEIGER, CERRIBUS, PYROTRONIC
Heat, Smoke, UV/IR sensors DET-TRONIC, SEIGER
TURBINES: - TB5000 Turbine Controls RUSTON, SOLAR, ROLLS - ROYCE, NUVO PIGNONE, ABB
NUVOPIGNONE Turbines: -PGT10, Fr5-1, Fr5-2, Fr6, Fr7,
Fr9 centrifugal, axial & reciprocating
Comp
Pressure Safety Valves-Fisher, Crosby, Consolidated FISHER YES
Annunciator panels- Allen-Bradley, Ronan
PRESSURE SWITCHS: - DWYER, SOR, BAKER CAC, HLR
LEVELSWITCHES:- ITT NEODYNE, HONEYWELL MAGNETROL, K TEK
Furnace and boiler burner controls - Honeywell HONEYWELL 7800 BMS
Waste Heat Recovery systems HONEYWELL 7800 BMS
Potable water and Instrument Air systems AIR DYNE, ATLASCOP
RADAR tank gauging systems SAAB, ENRAF
Process control valves of all types:MASNOLIAN, FISHER TAYLOR, ABB KENT, VALTEK FLOW SERVOR
Valve actuators-hydraulic, pneumatic, electric:- VALTEK, BIFFI, BITTIS, AIUMA, FLOWSERVOR
Pneumatic and electronic controllers-flow, pressure, level, temperature:-: ITT BARTON, ROSEMOUNT, FISHER, HONEYWELL, MASNOLIAN
TAYLOR, FOXBORO, YOKOGAWA
Process control switches, electric & pneumatic SOR, VERSSA, MAGNETROL, ETC
Electronic and pneumatic transmitters:-ROSEMOUNT, ABB KENT, HONEYWELL, FISHER, MAGNETROL
Pneumatic control panels / Shut Down Panel: -
HAVEN AUTOMATION, BAKER 1000, CNC, AUTOCON, MID SOUTH CONTROLS, Bristol Controls etc
Turbine meters- Custody Metering& Flow Measurement Daniel, Halliburton, Invalco, Smith Meters
Positive Displacement Meters- A.O. Smith (FMC)
DENSITOMETER:- SOLARTRON
Orifice Meters: Daniels
SHUT DOWN VALVES: - ROTA ROCKS, GH BETTIS, BIFFI, BITTIS, AIUMA

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 2726)

Go to Search Parameters...

Brief Description

I have 2 1/2 years experience in the pumping industry working as an acid and cement pumper operator and 4 1/2 years experience as an acid and cement supervisor. I am knowledgeable in acidizing primary and remedial cementing. I am looking forward to furthering my career internationally.

Diverse technical back ground including hydraulic power plant technician ,fresh water analyst, pump mechanic, maintenance coordinator, maintenance mechanic, and valve installation repair

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Instrumentation

Instrumentation and Control Engineer

Shipping Supervisor

I am graduated with M.Sc.Applied Geology with Specialization in Geophysics. I have completed my Internship with Oil and Gas development company (O.G.D.C) in geophysical data interpretation of oil well. I have also worked on different softwares like Golden software (surfer 8), Didger, QuickSyn.

A professional LNG Technician/Engineer is looking for a position where his skills and education will add value to operations.

Education:B.Tech (Civil), Pondicherry Engineering College, Pondicherry Univercity, in 1997. Skills: AutoCAD, MS Office, MS Project and Primavera. Trainings Undergone: Green & Red Code Accrediation program by CED, JAFZA

LOOKING FOR JOB IN ANY POSITION

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

QA/QC Engineer & Inspector for (Welding, NDT, Piping, Structure, Mechanical, Painting, Coating, Storage Tank, Electrical & Instrument) , Construction Supervisor and Field Engineer

Safety, Health, Quality, Environmental, Waste management, training, investigations, incidents, orientations,contractors, oil and gas, chemicals, construction, hazop, hazards, emergency response, job observations, near misses, safety alerts, hazard communications

Procurement & Supply Chain Management

Seeking Chemist, Laboratory, or Quality Control Position

MS-GIS, International MBA, Fluent english and spanish, basic Arabic

1Diploma in petrochemical engineering ,Kerala

Over +3 years of Operation experience in OIL & GAS industry with includes Pre-commissioning, commissioning operation.

Sr.Document Controller

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

Looking for suitable operation. vacancy

High Skills in Plant Management, Maintenance, Engineering, Training &Technical Support.

Project Engineer/ Program Manager/ Controls Engineer

Process Design and Simulation Engineer

PE in Mining, Environmental & Civil Engineering with 26+ years experience in surface coal mining management, engineering & environmental. I've held positions up to and including Vice-President of Operations. Well experienced in open pit dragline & truck/shovel operations. Well organized.

Project Management, Oil & Gas Industry, Civil Costing, Planing and Estimation

Oil field experience as field engineer, total of 10 plus years, 7 years in Middle East, worked in Kuwait, Oman, Egypt & UAE, Electronics Engineer, good exposure to IT, with driving license of GCC countries.

Project Engineer

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Mechanical Technician for oil and gas rotating equipment Electro Mechanic Technician for Domestic and Industrial HVAC Equipment.,NDT UTI and MTI LEVEL – II (Welding non destructive testing),

Apprenticed rigger with vast skills gained over 28 years,qualifications = resin socketing,crane/winch operator deck foreman,lifting gear coding,inspection ,certification.rig mechanic,rigging instructor

Over 14 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 6 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

Post Graduate Diploma in Indstrial Engineering, INDIA with past 4+ years exp. in Oil & Gas Industry

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

maintanance,welding,supervisor,fork lift,fabrication,roustabout,

I have ten years experience as operations/process technician in varying roles

Power Plants Commissioning , Operation, HRSG Commissioning

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Miner

Cost Estimating, Project and Contract Management, Planning/Scheduling, Project Controls and Finance

A Certified Instrumentation and Control Engineer. Experienced and trained professional as an Instrumentation and Process Control Specialist, Operations Supervisor and Telemetry Specialist. Maintains, calibrates and troubleshoots all field and process instrumentation, analyzers, PLC, SCADA, DCS.

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Geologist/Project management professional with determination to pursue and develop a professional career in a competitive and challenging environment

Nanagement engineer power utilities oil gas construction

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

I am working with Gujarat Narmada valley Fertiliser company ltd which is a fertilizer and petrochemical complex and produces Ammonia, Urea, Acetic acid, Formic acid, Weak Nitric acid, Concentrated nitric acid, Ammonium Nitro phosphate, Calcium ammonium Nitrate, Aniline, TDI, Methanol.

Natural Gas Resume

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out