Resume - Over Fourteen and half years of experience in Petroleum Refining & downstream pr...

Misco Jobs

Resume #60026

CONTACT INFORMATION:
View contact information...

Objective

To attain expertise in field of Oil & Gas thus contributing my best for the organization I serve

Experience Summary: 14+ Years Experience.
S.no Employer Duration Post Held
6 Essar Oil Limited, Jamnagar February 2006
to till date Manager (Process & Operation)
5 Reliance Industries Limited, Refinery Division, Jamnagar August 2002 to January 2006 Senior Engineer (Operation & Commissioning Engineer)
4 Mangalore Refinery & Petrochemicals Ltd., Mangalore February 1999 to August 2002. Control Room Technician

3 Kothari Petrochemicals Ltd, Karaikal, Pondicherry.
January 1997 to February 1999 Control Room Technician

2 Chem Fab Alkalis Ltd, Kalapet,
Pondicherry – 11
March 1994 to April 1995 Technician
1 JBF Industries Ltd, Kirumampakkam,
Pondicherry-14
August 1991 to April 1994
Control Room Technician

Details of Experience

Over Fourteen and half years of experience in Petroleum Refining & downstream process, Petrochemicals and Chemicals in the Field of Continuous Process plant Operations, Troubleshooting and Commissioning. Well versed in Normal Operation and Unit revamps, Gross root & Expansion of Crude Refinery Erection & Commissioning of CDU/VDU/SGU/VBU & LMU/KMU/Gasoline Treating units.

Details of Erection & Commissioning Experience in Essar Oil Ltd.

Experience in Erection & Commissioning of Crude distillation unit (14.5MMTPA), Visbreaker unit and LPG & Kero merox unit. Created DCS graphics, control group& trend group in the panel, simulation yield calculations. P& ID Checking and punch list preparation, Rotating Equipments trail run, Pipe lines & Columns pressure testing, Vessels & Columns Internal Inspection and other Start up preparations of the Systems.

Operation & Commissioning

Involved in FEED review of Crude Distillers unit (14.5 MMPTA). The Unit comprises of Crude desalters, Fired heaters, Atmospheric distillation column and vacuum distillation column, Net gas compressor, Product strippers, LPG column, Heat exchangers, Steam jet ejectors, and its utilities
Exposure to continuous Process Plant, hands on experience in the field. My responsibilities include Monitoring and control of process parameters through DCS in various unit operations and equipment's. Making the products at required specification & shift calculus relevant to plant efficiency and production. Active participation in trouble shooting and co-ordinate with the Technical & Maintenance service departments to solve the problems. Allocation of work to man power for various units, safety and fire fighting

Responsibility In Project & Process

* Review of PFD'S/P&ID'S/Equipment data sheet
* Prioritizing the system readiness for unit commissioning
* Review of P& IDs and Heat & Mass balance sheets
* Review of control philosophy with respect to new commissioning strategy
* Preparation of Hydro test packs, Flushing loops and its procedures for identified systems and checking of ISO's with respect to P& IDs

Reliance Industries Limited & Mangalore Refinery & Petrochemicals Ltd.

Involved in normal operation of Crude Distillers unit (650 KBPSD)& 6.5 MMTPA. The central control facility is DCS. The Unit comprises of Crude desalters, Fired heaters, Atmospheric distillation column and vacuum distillation column, Net gas compressor, Product strippers, LPG & Kerosene treating units, Heat exchangers, Steam jet ejectors, and its utilities

Responsibility in Operation & Commissioning

* Responsible for smooth and safe operation of plant and ensuring strict compliance of safety procedures and standard operating procedure
* Monitoring and Controlling critical parameters as per daily operating instructions
* Taking corrective action for any deviation in operating parameters in consultation with Production manager
* Coordination with Maintenance crew for routine and non routine maintenance activities
* Maintaining the equipment's in safe and healthy condition and conducting periodic Tripod meetings and ensuring reliability of equipments
* Co-ordination with quality assurance department for analysis and taking corrective action of unit parameters
* Inspection and troubleshooting of equipments during shut down
* Handling of planned and emergency shutdown and subsequent startup activities
* Conducting Job risk analysis and assessment for carrying out any modification in equipments while plant is running and keep contingency plan ready
* Analysis of unit problems in Aspen process explorer for process related issues

Revamp

* Activities related to revamp of crude distillers from 590 Kbpsd to 650 Kbpsd
* Review of PFD'S/P&ID'S/Equipment data sheet
* Preparation of Hydro test packs, Flushing loops and its procedures for identified systems and checking of ISO's with respect to PID's
* Segregation of job scope to pre shutdown and shutdown jobs and execution of jobs
* Participated in HAZOP studies & PSSR audits
* Preparation & updating work progress of unit systems during pre shutdown.
* Involved in conceptualization of decontamination process of pipelines, equipment for safe handing over of equipments for construction activities.
* Commissioning of New facilities like additional Chemical Dosage system, Pumps, Turbines, Ejectors, Heat exchangers to achieve the revamp objective
* Conducting test run of newly commissioned facilities and taking corrective actions if any

Kothari Petrochemical Ltd & Chemfab alkalis Ltd.

Inducted in Various Plants Viz Membrane cell caustic soda, HCL acid, Chlorine and Sodium hypo chlorate and other Utilities Involved in normal operation plant (100 TPD) The central control facility is DCS ( Fischer Rosemount's & Yokogawa micro XL).

JBF Industries Ltd

Inducted in Tetra chloro ethane, Tri chloro ethylene & Per chloro ethylene and its utilities, Involved in normal operation & Trouble shooting.

Additional Technical Training

* Two weeks simulation training programme Conducted by M.R.P.L.
* One week DCS (YOKOGAWA) Training programme conducted by YBL

Handled DCS control Systems

* Tata Honeywell 3000
* ABB Controls
* DCS Yokogawa – centum CS
* Fisher – Rosemount system 3

Erection & Commissioning

* 10.5 MMTPA Petroleum Refinery project ( ESSAR OIL LIMITED)
* 6 MMTPA Petroleum Refinery project(MANGALORE REFINERY&PETROCHEMICALS LTD)
* Caustic soda project ( CHEM FAB ALKALIES LTD & KOTHARI PETROCHEMICAL LTD )

Educational qualification

Qualification Level
Name of the institute /University
Grade
Year
Bachelor of Chemical Engineering Annamalai University
Tamilnadu, India. First Class. 1998
Diploma in Chemical
Technology Tamil Nadu Technical
Education Board High Second
Class 1992.

Field of interest
* Refineries
* Petrochemical industries.
* Process & Design House

Personal profile
D.O.B: 09-Jun-1971
Nationality: Indian
Gender: Male
Marital Status: Single
Language: English, Hindi and Tamil
Nationality: Indian
Joining Time: 45 Days

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 2462)

Go to Search Parameters...

Brief Description

I have twenty five years with Mobil/Duke energy in field and plant. I have three years with Northern Natural Gas as an operator

Over 25 years experience supervising the drillin of deep high pressure wells, both vertical & horizontial

Reliable and safety conscious, 41 Yrs old with 21 years plant operating experience in Oil and Gas Production, Gas Plant And petro-chemical industries within international environment

I am an aspiring and dynamic Process Plant Operations Personnel with supervisory skills and overall experience of about eighteen years in petrochemical industries, possessing a Diploma in Chemical Technology. Background includes supervision/ operation of continuous and batch process plants.

Engineering Graduate( B.Tech. Chemical Engg. – 4 years degree course) with 16 ½ Years Experience in Work Over Operations / Supervisor / Completion

DCS operator/panel operator/plant foreman / supervisor

Experienced Process Operator who has worked on a multitude of Process Plants and with many different types of equipment. Have various qualifications in Industry, highest being HNC in Chemical Engineering. I have experience in DCS control room operations, outside operations.

I have three years shift incharge experience and five years operating experience of PLC / DCS CENTUM CS 3000 Panel, having best control in normal operation, trouble shooting, startup / shut down and Turnaround activities.

I here by submit my application for the Toolpusher position in your esteemed organization. I posses about 19+yrs. rigorous, qualitative experience having been associated with leading oil exploring companies. I have experience in directional drilling & under balanced.

Locate of lines, pigging, maintance, gas flow,

Currently I am employed as a Senior Process Technician in the Luboil Unit at SAPREF (Shell & BP SA Petroleum Refineries) a 180 000 bbls/d refinery situated in Durban on the east coast of South Africa. I have just over eleven years oil refinery experience mainly in the Production/Operations Departmen

Powerplant operations including400/1500psi boiler/steam turbines/gtg/water treating

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

Day Engineer of Ammonia Plant, Shift Coordinator ( FFC-2, Fauji Fertilizer Company Ltd. Sadiq abad Rahimyar Khan ) 2003 to Date ),Shift Engineer Urea plant (2001 to 2002) Ammonia & Utility Plants, DCS operation ( FFC-2 ) (1996 to 2001) ,Pre-Commissioning & Commissioning Engineer Polymer plant, IF

Most of my experience is in the gas field production. I have worked on a variety of gas compositions including 55 Mcm/d with 34000 ppm H2S and W/H pressure 4200 psi; familiar with well completion, actual maintenance and repair of W/H valves and actuators.

OHSAS 18001, ISO 9000, ISO 14001, Operation troubles shootings DCS Control room operations. Plant start up & shut down activities.

I am an accomplished Asset Integrity Manager with the Oil & Gas industry, with extensive experience in the areas of asset integrity, operations, maintenance and offshore support.

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

I am currently unemployed. I was Well Services Supervisor with Total NIGERIA, previously I was working with Total ABK Main office c/o Almansoori, providing well supervision and coordination in Slickline, Well integrity management and Well servicing. I also have 25 years experience as a Slickline Sup

Motivated drilling/completion engineer, with considerable hands-on experience and excellent credentials, seeks opportunity to perform at peak potential for an aggressive company. Has achieved a solid reputation for managing challenging technical operations efficiently and economically.

Master Mariner with experience of LPG/C and LNG/C

Bachelor of Science(chemical) /Diploma in Industrial Safety/Diploma in Process control and Instrumentation

Operation manager/Coordinator Fluids

SUMMARY OF EXPERIENCE: Diversified experience over 20 years in various fields. The first few years of this period included tertiary studies where I successfully completed 2 diploma courses; Management Development Programme, Principles of Production and Inventory Management,

Wellsite Supervision , specializing in Completion and Workovers, I am 49 years of age , in good physical and mental health. I have 28 plus years experience in the Oil and gas services industry with 22 of that being internationally, mainly in the former Soviet Union republics and North Africa

Drilling Supervisor

Consulting from start to completion of oil well, to ToolPushing and Driller, to Supervisor and Foreman.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

I am writing to your goodselves wishing a reply to my present request. I would like to apply for the post of Production Operator or any other Board man . I enclose my resume with the name of referees.

Power plant project, O&M professional

12 plus years experience in the operation of various Hydrocarbon processing units located offshore (production platforms, and FPSO) and EPC company. My current position is that of Snr. Production Operations Lead with Sunlink Petroleum

Wellsite /Operations Geologist with Internation experince more than 18 years with sound operation knowledge on Deep water HPHT , Predrill & Realtime Pore pressure studies with exposure ot OBM & Air Drilling

I have had near 20 years of experience in the marine industry, currently a technical superintendent in a company with accomodation workbarges servicing the oil industry. All these barges are fitted with 8 point anchoring units, have worked on engine driven types such as Skagit & Amcon and electric

I am a Mechanical Engineer from Madras University in the year 1981. I have over 18 years of Offshore oil fields experience in production Operations of oil & gas and water injection.

Monitors meters, gauges and other instruments attached to equipment and makes adjustments whenever necessary

Experienced Permit to Work Co-ordinator with HSE and Operations experience

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

More than 20 years land mark f/R/b to tool pusher

27 Years Crude Oil Refinery and Manufacturing experience

At Present im a lead contol room operator of a 400 mmcf gas processing plant in wyoming

Gas Plant Operator, Process Operator , Control Room Operator

B.Sc. first class with 12 years of experience in petrochemicals/oil and gas field

Machinist for CNC & general. I want to apply for CNC Machinist

dcs panel operation for terminal and plant

Having 13+years of experience in refinery,fertilizer & petrochemical field which includes 5years in india and 8+yearsin kuwait.

-I worked offshore in Nigeria and Brazilia on CCR Operator position

Over Fourteen and half years of experience in Petroleum Refining & downstream process, Petrochemicals and Chemicals in the Field of Continuous Process plant Operations, Troubleshooting and Commissioning. Well versed in Normal Operation and Unit revamps, Gross root & Expansion of Crude Refinery Erect

I an am executive with 24 yrs of experience with success in start up, strategic planning, product management, sales and marketing, cost control, technology transfer of engineering/equipment /turnkey system being part of global cross functional team for strategy building and success in the region.

Twenty five years in managing remote area field construction and logistical operations through out Asia. Construction of air strips, heli-pads, camp facilities, drilling location. Subsea Fiber Optic cable landing operations and post lay burial operations on and off shore.

Dear sir, I would like to submit my application form for a suitable post of production engineer. Here is my CV below. If you want other document or information, please let me know.

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out