Resume - Petrochemical Process Operator dealing with Polypropylene and Polyethylene produ...

Misco Jobs

Resume #6136

CONTACT INFORMATION:
View contact information...

CAREER HISTORY AND EXPERIENCES
1.November 1992 to October 1993.
Production Operator PT.Lautan Otsuka Chemical, Indonesia, an Azo Di-
carbonamida Plant.
2.November 1993 to November 1994.
Junior Production Operator PT. Hamparan Rejeki, Indonesia.
3.December 1994 to February 2003.
Senior Process Leader at PT.Tri Polyta Indonesia Tbk, the first and largest
Polypropylene company in Indonesia.
4.January 2003 to present.
As Polyethylene Finishing Operator in PETROKEMYA, Arabian Petrochemical
Company (Wholly owned by SABIC), Kingdom of Saudi Arabia.

JOB EXPERIENCES
My career has been started from November 1993 when I was worked at PT. Lautan Otsuka Chemical, that produce AZ (Azo Di-Carbonamida). My second field was PT. Hamparan Rejeki, an acrylic fiber plant Rejeki, an acrylic fiber plant with DUPPONT technology as Junior Field Operator, until November 1994.

Then, since December 1994 to February 2003, I worked at PT. Tri Polyta Indonesia Tbk. Cilegon - Indonesia, a petrochemical company of polypropylene plant with UNIPOL Technology that produces Homopolymer, Random Copolymer, and Impact Copolymer; with catalyst Shac 103, Shac 201, Lynx 1000, Lynx 1010, Mitsui TK 360 and Mitsui RK 300 series; as Shift Leader.

From January 2003 to present I was working at PETROKEMYA, Arabian Petrochemical Company, a leading multinational company in Petrochemical in eastern province of Kingdom of Saudi Arabia; as Polyethylene Field Operator.

JOB DETAIL
November 1992 to November 1993 as Production Operator at PT. Lautan Otsuka Chemical
-Operate all equipments.
-Responsible for produces of Azo Di-Carbonamida.
-Trouble shooting on field and Control Room.
-Keep work area in clean, safe and tidy.
-Reporting to Lead man.

November 1993 to November 1994 as Junior Field Operator at PT. Hamparan Rejeki
-Operate all equipments.
-Responsible for produces of Acrylic Fiber.
-Trouble shooting on field.
-Keep work area in clean, safe and tidy.
-Reporting to Lead man.

December 1994 to December 1996 as a Vent Recovery and Purification operator at PT. Tri Polyta Indonesia Tbk.
-Recover as much monomer as possible that is contained in the vents from the resin degassing system and reactor vents.
-Treat light components and sent it to the flare or recycled it to reactor.
-Monitor distillation system in order to maximize separation of monomer propylene from any impurities, purified it and then sent it back to reactor as feed stream.
-Prepare raw materials such as ethylene, propylene, hydrogen, nitrogen, catalyst, co-catalyst, and SCA handling.
-Responsible for raw materials purification such as Ethylene, Propylene, Nitrogen, and hydrogen purification.
-Start and stop purification, distillation system and vent recovery unit.
-Prevention maintenance equipment such as compressor, blower and pump.
January 1997 to December 1998 as a Reactor and Extrusion operator
-Start up and stop unit based on order.
-Responsible for finishing product handling, prepare solid and liquid additives, for keep best last product quality.
-Keep equipment such as mixer, melt pump, pelletizer, blower and conveying system.
January 1999 to February 2002 as a Board man/ DCS operator
-Responsible for controlling all units to run in smooth condition.
-Prepare to start up and to stop all units.
-Prepare all product transitions based on order.
-Coordinate field operator in all units.
-Operate DCS-PLC System (Yamatake-Honeywell TDCS 3000).
March 2002 to February 2003 as Shift Leader/Acting Shift Supervisor
-Coordinate all operators in all section: Reactor/Extrusion, Distillation/VR & Purification
-Trained new employee in Polypropylene production.
-Make daily report.
-Cross coordinate with other department that relates, like Utility, Jetty, Product Handling and Maintenance.
January 2003 to present as Polyethylene Field Operator in Petrokemya.
-In Product Finishing section which has responsible of keep best last product quality
-Operate Pump, Blower, Compressor, and Mixer/Extruder with KOBE technology.
-Operate DCS with Yokogawa Centum 3000 DCS Series in order of Polyethylene production.
-Trained information to the new local employee (Saudi's) of Unipol and Kobe technology.
-Writing and reporting to shift supervisor

PROFESSIONAL TRAINNING ATTENDED

1.GENERAL ENGLISH AND CONVERSATION
September 24th 2001 to June 24th 2002, LB-PP LIA Cilegon.

2.PRE-EMPLOYMENT for OPERATION TECHNICIAN
December 1st 1994 to March 1st 1995, PT. Tripolyta Indonesia Tbk. Cilegon.

3.CARDIAC PULMONARY RESSUSCITATION
October 26th 1996 to October 30th 1996, PT. Tripolyta Indonesia Tbk, Cilegon.

4.FIRST AID TRAINNING
July 1st 2000 to July 5th 2000, PT. Tripolyta Indonesia Tbk, Cilegon.

5.TPI-P/P PROCESS OPERATION AND REMEDIAL TRAINNING
June 1st 1997 to September 15th 1997, PT. Tripolyta Indonesia Tbk, Cilegon.

6.FORKLIFT OPERATOR TRAINNING
September 29th 1997 to October 3rd 1997, LPK ALKON, Cilegon.

7.FIELD FIRE FIGHTING TRAINNING
November 27th 1997, PT. Krakatau Steel, Cilegon.

8.EMERGENCY RESPONSE TEAM MEMBER
January 20th 1996 to June 30th 1998, PT. Tripolyta Indonesia Tbk, Cilegon.

9.SUPERVISORY DEVELOPMENT PROGRAM
June 18th 2002 to July 23rd 2002, PT. Tripolyta Indonesia Tbk, Cilegon.

10.FUNDAMENTAL YOKOGAWA CENTUM 3000 TRAINING
January 25th to 29th 2003, Yokogawa Middle East Training Center, K.S.A.

11.KOBE STEEL Ltd.Co. JAPAN TRAINNING ( Mixer/Extruder LCM-450 H)
August 30th to September 4th 2003, PETROKEMYA Training Center, Al-Jubail, K.S.A

PERSONAL

Age: 29 years old
Citizen: Indonesian
Status: Single
Health: Excellent

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 2500)

Go to Search Parameters...

Brief Description

Please Contact ASAP

Over 13 years experience as an Advanced Care paramedic. Extensive remote area paramedic coverage-Pipeline construction and oilfield exploration rig. Helicopter rescue/retrieval.

AIR SEPARATION PLANT Operator

Education qualifications: July 2005 - B.Sc of chemistry & geology

I am a chemical diploma holder and having 02 years apprinticeship as plant operator from fertilizer (Ammonia Plant) FFBL and having round about 06 years oil and gas processing plants experience.

Functioning in a project/program management consulting role for MAXAM and CYANCO Companies on highly sensitive processes. In these assignments, I assembled high-performing teams that delivered a complex project plan ahead of schedule, despite a demanding timeline and aggressive business objectives

A senior-level environmental, safety, security and health professional who has worked in the manufacturing as well as EHS functions for private firms as well as large corporations and consistently contributes to corporate goals. A proven trouble-shooter, problem solver and innovator with a strong t

I am working as a Executive Engineer in SIEMENS PAKISTAN LTD IN Engineering, Construction & Maintenance Department (Oil and Gas Projects). Currently working on a Project of Lasmo ENI Pakistan Limited working as a field engineer & had gained a experience of Construction of Structure & Piping.

BS in Petroleum Geology.

Twenty-two years experience in detailed FEED - mechanical, thermal and process design of pressure vessels, direct fired process heaters, hot oil heaters, boilers, pressure pipework, heat exchangers, reactors, incinerators, furnaces and associated ancillary equipment for petrochemical plants.

Key Technical Skills

Drilling Fluids Engineer / Consultant with expertise in all drilling fluids including Silicates, Glycols and syntetics. Expertise in deep water, ERD and HPHT enviroments. Skills in operations, coordination, tendering, well site, marketing and presentation

IIT Chemical Engr with 23 yrs exp in Sales & Marketing of Downstream Petroleum & Petrochemical Products in Fortune-500 Oil & Gas Company

Three years apprentiship as plant operator in pakistan oilfields ltd

More than 6 years experience in Oil and Gas Production field. And Educational Qualification is Diploma in Mechanical Engineering

Communicates well at all levels, high integrity and personal commitment.Good organisation and leadership skills.

Work Over and completion for onshore rig

Pre sales consultant, product consultant, business analyst

APICS (CPIM) certified, Graduate diploma in Production Engineering

Petrochemical Process Operator dealing with Polypropylene and Polyethylene production. More than ten years experiences with processing, treating materials, handling of product, pre-commissioning, commissioning activity and start-up the new plant.

EXPERIENCED MARINE SUPERINTENDENT - MASTER MARINER, FPSO / TANKERS / SHIPYARD / OFFICE BASED

Was involved in the pre-commissioning of Utilities system through close liaison with construction and subcontractor personnel.

14yrs oil and gas experience covering pipeline pigging operations, pipeline inspection activity, fpso production operations in crude oil plants, water reinjection plants, gas reinjection plants, gas dehydration plants, produced water handling and discharge, safety management and implementation

Experienced truck pusher, driver manager, frac. tanks and vacuum trucks

More than 30 years of experience in Control & Instrumentation field, out of which 28 years in a leading Engineering Consultancy organization MECON Ltd. (Govt. of India Undertaking) in Steel, Non-Ferrous, Chemical, Petrochemical & Power

Sir, as I am working since couple of decades in oilfield both onshore and offshore I have come across all sorts of jobs related with mobile land and offshore rigs, jackup self elevated platforms, barges heavy lift ships upto 2ooo ton crane capacity, engines cat, GM, cummins, mudpumps,bop,X" valves

PRODUCTION PLANNER,PRODUCTION CONTROL 25+YEARS EXPERIENCE

B, Tex/ch chemical engineer having experience in Oiland gas with 14 years

HSEQ manager, management system development, auditing, safety case development

Very good experience in the mechanical maintenance of various oil fields, gas companies and refineries. Familiar with day to day maintenance planning, shutdown planning , CMMS and IPP syatems.Familiar with Primavera P3-e, MS Project, SAP-R3, MAXIMO&TEROMAN. Budget preparation&cost control

Machanical & Auxiliary Operator power plant in Wartsila 18V46 & 20v32 Engines Exhaust Gases Boilers, Aux. Boilers, Oily Water Treatment, Membrain Water Treatment & Wesfalia Separators &11Kv cable installation Drill jumbos shotcrcat equipment & submersible pumps working in the Excavation and Linin

Training

To put my best possible efforts by applying my professional qualification and expertise in order to enhance the image of the organization in which I am working.A challenging position requiring creative and innovative approach to Oil industry , Quality control of sales oil, Crude oil process, Laborat

I am a Diploma Mechanical Engineer and am an oil & Gas production / plant operator, having Ten Years experience. Now I am working for OXY (Occidental Petroleum of Qatar ltd) and QP as Well Completion Assistant and Well-head Operator through SOS (Specialized Oil Services)

3rd Class Power Engineer with sour gas and oil operating experience. Currently involved in start-up and commissioning large hydrocarbon upgrader.

Diploma in Petro-Chemical Technology

10years of in depth and rich experience with various reputed organizations; currently serving at Essar Oil Ltd, Vadinar Refinery.Possess domain expertise in plant operations (Air separation plant)/safety/Pre-Commissioning & Commissioning including conceptualization, planning and execution of project

I have Bachelor Dagree in Chemical Technology and have 6 year working experince in refining field in operation

NQF, National Qualification Forum, Qualified as Production Artisan Grade 4

experienced professional seeking work as facilities engineer

Capt Amit Bhandari, DPO. Experienced on offshore supply and deep sea anchor handling vessels. 220 T bollard pull. Carried out towing operations, rig moves, pipelaying assistance. Holding DP courses and certification

Working at Syncrude Upgrader, operating hydrotreater units for 2.5 years. Working on turnaround projects, catalyst changeouts, start up and commissioning. I have a 4th class Power Engineer certificate as well as a Process Operator Technician certificate.

Commissioning engineer of C2-cracker plant, Operation engineer of c2-cracker plant,operation engineer of gas refinery and SRU

IT- Co ordinator,Help-desk manager

Engineer / Supervisor Oil Industry upstream production, maintenance & construction. Large field oil production supervision, light & heavy crude oil, well ops & monitoring. Tank farm & ppln construction. Budgeting & Contracting Eng

Seismic data Interpretation is a complex yet challenging aspect of geophysical sciences. Getting this work write not only requires patience but needs a knack of enthusiasm and adventurism along with a sense of responsibility. Same experiences you will find in my CV.

A Mechanical Engineer who’s very fortunate, always in jobs that were challenging. Resourceful, analytical and detail-driven individual with capabilities in completing multiple tasked with competing deadlines. Aggressive in identifying and resolving inefficient operational processes.

Chemical Engineer with 10 yrs 4 months experiences in Refinery Operations, Process, Commissioning, hazop and safety

Offshore Crane Operator currently seeking equivalent position w/ proven potential for advancement to BCO

Looking for work opportunities preferably in the area of Completions database administration/Punchlist/Handover. Work experience of over 10 years with 5 years in the Oil and Gas commissioning sector. My skills are multi-tasked mostly in project documentation and completions database administraton.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out