Resume - HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

Misco Jobs

Resume #62725

CONTACT INFORMATION:
View contact information...

EUROPEAN
CURRICULUM VITAE
FORMAT

WORK EXPERIENCE
* Dates (from – to) October 2006
* Name and address of employer SAIPEM S.p.A. – SAIPEM Portugal
Via M. di Cefalonia, 67, San Donato Milanese (MI) - Italy
* Type of business or sector Oil & Gas
Saipem (controlled by ENI) is leader in providing engineering, procurement, project management and construction services both in offshore and onshore industry.
* Occupation or position held HSE Eng. / Safety Construction Officer
* Main activities and responsibilities Contribution to the Company and site development and execution system, following the evolution of the health, safety and environment rules supplying applicatory consultancy for the operational requirements and improvements. Maintaining awareness of current Health, Safety and Environmental legislation. Assisting with the implementation of the planned health, safety and environmental audit program to monitor conditions and practices and advising on remedial actions when required. Preparing detailed and periodical reports for the Company/Client and ensuring that any remedial actions identified are closed out within an appropriate timeframe. Maintain procedures and work instructions updated, including Emergency Response Procedures, together with Marine Safety Officer. Monitor all accidents/incidents on the project and follow-up of investigations. Preparation and periodic analysis of accidents/incidents statistics. Liase with the Company on HSE matters and represent the HSE function at Safety Meetings as required. Co-ordinate HSE training requirements and ensure all project personnel training needs are met. Perform internal audits and inspections. Revision of internal HSE procedures and providing personnel with the training necessary to implement the Safety and Environment System. Managing and monitoring, performance indicators and third party safety training. Coordination and follow up of JSA and RA. Ensuring the knowledge of operating safety standards and relevant regulations applicable to the Site, workers and operating equipment and machinery. Ensuring that the safety management system conforms to certification standards and Company policies. Planning and supervising safety procedures in the operative activities. HLO and HRO (Helicopter Refueling Officer) duties.
Integral management team member in offshore activities based on S7000, a Semi Submergible Crane Vessel previously engaged in Mexico (Pemex) and North Sea (Statoil, Total, BP, Maersk).

* Dates (from – to) June 2005 – October 2006
* Name and address of employer C.S.C. Security and Air conditioning Centre s.r.l.
Via. T. Tasso 120/122, Palermo- Italy
* Type of business or sector Procurement and installation of technological and security systems.
* Occupation or position held Appointed technical responsible (in compliance with law 46/90)
* Main activities and responsibilities Supervision of activities, co-ordination of work teams. Acting as consultant in safety matters (compliance with d.lgs. 626/94 and amendments) and in the implementation of a quality management system in compliance with ISO 9001.

* Dates (from – to) May 2005 – October 2006
* Name and address of employer EUROSISTEMI s.r.l.
Via Croce Rossa 28, Palermo
* Type of business or sector Technological installations and construction firm.
* Occupation or position held Appointed technical responsible (in compliance with law 46/90)
* Main activities and responsibilities Consultant and advisor at the planning stage, both for electrical and fire proof systems.

* Dates (from – to) July 2004 – January 2005
* Name and address of employer PROTECO s.c.a.r.l.
Via. Mons. Pottino 3, Palermo
* Type of business or sector Naval Construction
* Occupation or position held Stage – Quantity Surveyor
* Main activities and responsibilities Auditing and revising of the management quality system in compliance with ISO 9001:2000. Supporting the technical office during the "maintenance of equipments for Fincantieri", production planning and management of supplies (budgeting, selection of certified suppliers, checks incoming goods). Planning of material requisition orders for planned distribution systems (water distribution, fire fighting system).

* Dates (from – to) June 2004 – December 2006
* Name and address of employer "Frigotecnica" di Bruccoleri Stefano
Bagheria (PA)
* Type of business or sector Coach building fitting out of special vehicles for food distribution
* Occupation or position held Appointed technical responsible
* Main activities and responsibilities Industrial planning and supervision. Design and implementation of company website.

* Dates (from – to) January 2003 - October 2006
* Name and address of employer ISVIM s.a.s -TECNOCOM di Vaccaro Alfredo
Via Resuttana 352/b, Palermo
* Type of business or sector Professional Advising
* Occupation or position held Free lance worker
* Main activities and responsibilities Advising companies and sites in the development of personnel in fire fighting systems. Preparing bespoke safety training courses in noise protection, manual handling, chemical/asbestos awareness, visual display stations, fire fighting and emergency preparedness plans, according to d.lgs. 626/94 and amendments.
Internal auditor of quality management systems in compliance with ISO 9001.
Design and development using AutoCAD software. Redesign of non compliance machinery to comply with current legislation.

* Dates (from – to) 2000- 2006
* Name and address of employer Private tutor
* Type of business or sector Private tutor to students studying mathematics, physics and chemistry.

EDUCATION AND TRAINING

* Dates (from – to) 22-06-2007
* Name and type of organisation providing education and training StS Stillasservice AS
* Principal subjects/occupational skills covered "Fall Protection Training Course" based on Norwegian legislation and regulations"

* Dates (from – to) October 2006 – May 2007
* Name and type of organisation providing education and training A1 SAFETY TRAINING CONSULTANTS (1995) Ltd
* Principal subjects/occupational skills covered "Banksman/Slinger and Lifting safety Training Course" to BS7121 Part (Eleven)
"COSHH Awareness training Course"
"Safe Use and course awareness on Abrasive Wheels"

* Dates (from – to) 27/03/06-05/04/06
* Name and type of organisation providing education and training PETANS LTD Professional Training Centre – Norwich - UK
* Principal subjects/occupational skills covered "Helicopter Refuelling"
"Offshore Emergency Helideck Team Member" (OPITO Course)
"CAA Helideck VHF (Restricted) Radio Course" (CAP 413 & CAP 452)
"Offshore Helicopter Landing Officer" (OPITO Course)
* Title of qualification awarded Helicopter Landing Officer, Helicopter Refuelling Officer, Helideck Team Mamber/Leader, United Kingdom CAA Offshore Operator

* Dates (from – to) 18/10/2006 – 20/10/2006
* Name and type of organisation providing education and training APT Professional Training Center - Bornasco (Pavia)
* Principal subjects/occupational skills covered "Basic Offshore safety induction & emergency training included HUET and EBS" (OPITO 1)

* Dates (from – to) 09/01/04 – 18/03/05
* Name and type of organisation providing education and training Ministry of Italian education - Osservatorio Regionale Siciliano dell' Ambiente (ORSA)
* Principal subjects/occupational skills covered Master in Environmental management, Quality and Safety (MEQUAS)

* Title of qualification awarded - "Construction Safety Coordinator" in compliance with D.Lgs. 494/96 and amendments.
- "Auditor/Lead Auditor of Quality (ISO 9001) and Environmental management systems (ISO 14001)" in compliance with ISO 19011.
Knowledge of EMAS regulations, Ethic Certification (SA8000), Safety management systems (OHSAS 18001), HACCP.

* Dates (from – to) 19/04/2004
* Title of qualification awarded Charted Engineer n°7137

* Dates (from – to) July 17th 2003
* Name and type of organisation providing education and training University of Palermo
* Title of qualification awarded Master's Degree in Mechanical Engineering (passed with honors)

PERSONAL SKILLS
AND COMPETENCES

MOTHER TONGUE ITALIAN

OTHER LANGUAGES

ENGLISH
* Reading skills FULLY COMPETENT
* Writing skills FULLY COMPETENT
* Verbal skills FULLY COMPETENT

SOCIAL AND ORGANISATIONAL SKILLS
And competences i'm an outgoing fun loving person with excellent communication skills and natural leadership qualities. highly competent in all aspects of customer and people management, with the ability to work within, lead and develop a team to maximum effect in an ever-changing environment along with the ability to diversify into new roles quickly.
My education and skills that i have obtained has afforded me an excellent foundation towards becoming a successful candidate for future employment.

TECHNICAL SKILLS
And competence excellent knowledge of windows (98/xp) and microsoft office applications.
autocad, html and visual basic programming.

ARTISTIC SKILLS
And competences i have a passion for music in which drew me to learn to play the guitar which developed into becoming lead guitarist and singer in a band with friends.

DRIVING LICENCE(S) Full

ADDITIONAL INFORMATION REFERENCES AVAILABLE ON REQUEST.

Confidentiality notice: I authorize the use of my personal data according to national laws.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 2492)

Go to Search Parameters...

Brief Description

With a Chemical Engineering degree and 5 years experience in Oil & Gas, Water Treatment, Quality Control and Project Management, I possess strong analytical, quantitative, communication, management and problem–solving skills. My initial objective is to build on these skills, gaining full chartered

I am keen to be considered for Graduate Mechanical Engineer, I have recently completed a Masters in Mechanical Engineering at University of South Australia. I have seven months experience worked for Praga Tools Ltd, India, as a Junior Production Engineer,

Senior Process Engineer with 13 years of Experience in Petrochemical and LNG process

Im a highly qualified Gas turbine operator/ I have worked on Construction/Commissioning/Operation Of Alstom GT13E2, TM 2500,GE Frame 9,6, and Solar Gas Turbines

To obtain a 2nd class welder/boilermaker position that utilises my vast experience as a welder and my experience with steel fabrication.]

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

Document Control

College Degree, Supply Process Development & Continuous Improvement, Sourcing & Procurement Strategies, Bid & Proposal Evaluation, Negotiations, Supplier Selection, Contracts, Equipment/ Materials/ Components & Services, Cost Reductions, Training, Presentation of Results.

EPC/EPL Manager, Rehab & startup projects. Polished broad based o/seas tech & mgmt skills

Professional with Ten years of total work experience out of which Seven years in cost estimating, cost control, and project management. Proven record of success analyzing all aspects of a project or area of responsibility, project scheduling investigating and improving efficiencies of operations.

Certified security supervisors trainer from SITO. Certified courses on Fire fighting, First Aid and different courses on security operations.

Operations engineer on aviation refuelling operations, design and maintenance management in the airport depots, quality assurance manager on SHE issues, supply management for aviation fuels

Greenhand Roustabout course (Manual Handling, Safety Observation Systems, Risk Assessment, COSHH Awareness, Helideck Assistant). BOSIET (Basic Offshore Safety Induction & Emergency Training). NOGEPA. OPITO Approved Slinging and Lifting Operations' course. UKOOA Medical.

Expertise in handling instrumentation systems like Inlet Gas Metering Systems, ABB & DANIEL Gas Chromatographs, Analyser Management and Data Acquisition Systems, Process Gas Analysers, Process Monitoring Field Instruments and Custody Transfer Equipment. with proven abilities in reducing downtime.

I am a Metallurgical Engineer with knowledge in Technology Management. I have developed skills either through training or work experience in Failure Analysis, Metallography, SEM, Thermal Treatments, Power Tools, Mineral Processing, Microsoft Office Suite, Costin, Estimates and Business Development.

I am Vaka Vasavi, at the verge of finishing my Masters in GIS at UT Dallas. Currently working on my Master Project which will conclude my course work at UTD, at the same time I am looking for an internship/Fulltime position in a organization which would benefit from my GIS knowledge, skills and

Humility, Availability, dynamism, versatility and team spirit are my main assets

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Rigger position

MECHANICAL ENGINEER HAVE MORE THAN 9 YEARS EXPERIENCE WITH WITH RANGE OF EQUIPMENTS . IN MY RECENT JOB, I AM RESPONSIBLE ABOUT SCHEDULING AND PERFORMING TH PREVENTIVE AND CORRECTIVE MAINTENANCE OF TWO VESSELS AND OIL POLLUTION CONTROL EQUIPMENTS .

Geotechnical Engineer specializing in rock/soil engineering and numerical modelling, based in Vancouver, Canada. Looking for a challenging career opportunity worldwide in natural resources sector, civil/mining geotech consulting or academia.

Career in logistics management during the past ten years. Operational background from the ground up with cargo airline, third party logistics provider, freight forwarding, marine and air cargo charter, and oil & gas industry experience in remote locations, namely Alaska and Russia / FSU.

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

BSc + Fire + Safety + Experienced

ACZ Licence. I am looking for a new career and a better future for my family.

B.E (Mechanical) with 3 years of experience in automobile industry (sheet metal), good working knowledge of Pro/Engineer, Pro/intralink and exposure to Catia V5.

Project Control, Corporate Treasury, ERP Application Consultants

Thirty years as city of Winnipeg Fire Paramedic Service working through the ranks to a position of Captain . Knowledge of field and operation within emergency field.Experience in organizing and directing personnel. Extensive training in safety sector as National Construction Safety Officer and Consc

hnician/manager with over 15 yrs experience in train scheduling and safety. Expertise in train circulation graphing, train scheduling, and statistical analysis of safety and performance. Strong mathematical, analytical and problem-solving skills; demonstrated leadership; sharp eye for detail.

A B.S Chemistry graduate of University of the Philippines in the Visayas; research team-member on “Ecological Assessment of Iloilo River. Phase I: Identification and Quantification of Pollutants of Iloilo River” for the year 2003-2005; had OJT at the National Pesticide Analytical Laboratory, Dept.

Over 7 Years Military Experience in the Petrolum Supply Specialist Role. Have succeeded at various jobs in Sales, Marketing, Insurance and Mailroom Processing.

I am a Mechanical Engineering working in a Service company. I have two Msc one of them in Oil and Gas Engineering. I consider myself as a multi skilled Engineer

I have a cumulative of 5 years field work experience and my experience varies from manufacturing/processing environment to Information Technology and Oil & Gas.

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

Experienced construction project manager with heavy background in petrochemical production operations

Electrical Technician

I am seeking a challenging and promising professional career in the field of Electrical Engineering in which I can utilize, practice and build on both the theoretical knowledge I gained through my academic studies and the accumulated practical experience

A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore: - Jack-Up platform (as Barge Master, Rig Mover ) - DynamicPositioning (DP2 Dive/ROV) - Heavy-Lift Constrcution/Offshore Installation/Platform removal/Pile Driving - SEMISUBMERSIBLE Units (as Barge Master)

Result-driven in Civil Engineer with seven (7) years technical experience in Construction of Oil and Gas, Petrochemical, Industrial Oil Petroleum Refinery, LNG trains onshore facilities and Residential/Multi-Storey Buildings Development Projects.

Graduate with Bachelor Degree in Science Surveying and Geomatics (Hons) from Universiti Teknologi Mara Shah Alam

Petroleum Technician

Experienced in Procurement, Supply & Engineering Management

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

BTech Electronics and Communication Engineer having 4 years experience in Operation and maintenance of Power Substation.Also have Post Graduate Diploma in Advanced Computing.Knowledge of PLC Programming and Applications and SCADA Programming and Applications.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

Professional bilingual Engineer with, mining, constuction, and maintenance experience

Looking for Entry Level Job Into Oil Industry

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out