Resume - To become employed as a Process Operator

Misco Jobs

Resume #6376

CONTACT INFORMATION:
View contact information...

To become employed as a Instrument Technician, Instrument Designer or Process Operator which will allow me to use my degree in Instrumentation Technology and skills to be able to contribute to the success and help the company to meet and exceed the future goals of the company.

Experience:

EnGlobal Engineering Inc.
Beaumont, TX
Instrument Designer
23 April 2003 - 12 May 2004

Participated in all aspects of Instrument Design on the Exxonmobil Congeneration project and the revamp of the water treatment and power plant 2 and 3. Work with Designers and Lead Designers in the production of Design deliverables for the Instrumentation & Control System. This projects had greater than 1000 instruments to be purchased and several thousand "I/O" (inputs and outputs), going to the control system to be managed. Use Microstation for all deliverables.
Installation Details of the Control and Safety Systems
Physical Design of Control Panels, Junction Boxes, Instrument Racks and Control Consoles.
Wiring and powering of all Instrument and Control Systems.
Coordinate design efforts with all other design disciplines.
Timely production of all assigned Instrument Design deliverables
Accurate record keeping of technical information used in design.
Maintain master stick files with up to date deliverables.
Reports to the Lead Instrument Designer
Reports to the Instrument Design Supervisor

DMC Orange, TX
Instrument Technician
25 September 2000 to 6 November 2001

Maintained records and produced reports for supervisor concerning the condition of control valves at the beginning of repair until the delivery date.
Inspected, tested, adjusted and repaired electric, electronic, mechanical and pneumatic instruments and systems.
Inspected meters, indicators and gauges to detect abnormal fluctuations-
Tested accuracy of flow meters, pressure gauges, temperature indicators, controllers.
Used test equipment, such as pressure gauges, pulse generators, oscilloscopes, ammeters, voltmeters and watt meters.
Removed defective instruments from system.. Replaced defective parts, using hand tools.
Lubricated instruments and replaced defective wiring and tubing. Calibrated readings on instruments according to standards and adjusted phasing.
Recorded the calibrations made, the parts and the components used and the inventory of parts on hand.
Maintained inventory of control valve parts, electronic and pneumatic instruments and cleaning material.
Assisted Instrument Technician supervisor in planning and execution of repairing control valves and ordering new supplies.
Maintained high standards of excellence.
Successfully handled the packaging and delivery of control valves to the proper refinery.

Spherion Nederland, TX
Customer Service Professional
12 June 2000 to 25 September 2001

Talked with customers by phone and in person.
Reviewed complaints concerning billing and service rendered, referring complaints of service failures to designated departments for investigation.
Responded to written and telephone requests for Cellular Service
Maintained high standards of excellence.

United States Navy San Diego, CA
Hospital Corpsman
20 February 1996 to 10 May 2000

Took and recorded temperature, pulse and respiration rate.
Gave medication as directed by physician and in accordance with approved nursing techniques.
Maintained calibration checks on accu-check machine.
Notified supervisor and physician of patient condition and reaction to drugs, treatments and significant incidents.
Took temperature, pulse, blood pressure and other vital signs to detect deviations from normal and assess condition of patient.
Served as leader for group of personnel rendering nursing care to number of patients.
Executed daily operations of preparing immunizations for that clinic.. Sterilized equipment and supplies, using germicides, sterilizer and autoclave. Maintained high standards of excellence.
And Many other duties.

Education:

AAS in Instrumentation Technology
Lamar Institute of Technology
Beaumont, TX
December 2002
GPA 3.4

Electronic Instrumentation
Certificate
Lamar Institute of Technology
December 2002

Hospital Corps School
Great Lakes, IL
Rate of HM
United States Navy 1996

West Brook Sr. High School
Beaumont, TX
High School Diploma 1995

Achievements and Membership:

Phi theta Kappa Honor Society Member Deans List Fall 2001
Honorable Discharge (U.S.N.)
3 Year Good Conduct Award (U.S.N.)
4 Year Service Strip (U.S.N.)

References: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 2461)

Go to Search Parameters...

Brief Description

Oil and gas exploration consultant with twenty years worldwide experience seeks project, contract, or position

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

A qualified Mechanical Engineer with 10 years of diversified experience in Pipeline and Plant Installation and commissioning as well as Polymer production and Structural Repair of components.

Planning, implementation and supervision of exploration activities in the field

Environ and social impact expert, sustainable development project planner, monitoring and evaluation, stakeholders mgt, computer literate, B.Ag econs, M.sc, Ph.D (Rural sociology)

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

I have more than 7 years experience in Offshore and onshore rigs in Pearsian Gulf and west and south of iran as drilling supervisor in Exploration, Workover and development wells and 1 year in AFD project as drilling Engineer, I familiar with high tech drilling tools such as power drive, auto trac

Retail supermarket management operations: employee relations, customer service, safety, inventory levels/ordering, profit/loss, legal requirements, building maintenance

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

Bachelor in Petrochemical Engineering from Dr. B. A. Technological University, Lonere, India with first class distinction in the year 2000.

Field Engineer - UBD

: 8 yers experience in pre-commissioning & commissioning and normal operation of refinery and petrochemical operation

Engineer with land and offshore oil and gas experience. Diverse knowledge of safety, drilling rigs, drilling equipment, casing, down hole expertise, completion, workovers, coil tubing, production, operations and cost control.

I'm a Lead Mechanical Technician with over 15 years experience with a major Oil and Gas Company and with considerable background in production engineering work. Served a mechanical engineering apprenticeship with a diploma in process engineering.

Cost Controller with strong accounting background. Over 2 years experience as cost controller and 14 years as accountant with multinational companies. Technical skills include preparation of project cost control plans, budgets and forecasts, cost tracking, cost and revenue analysis etc.

I am a qualified fourth class power engineer , who is quite mechanically inclined. I able to work well independently or in a team atmosphere. I am a hard worker who is happy to take on new challenges. I am good at troubleshooting problems , and am a very safety conscious worker.

Pipeline Commissioning, Maintenance & Decomissioning Engineer

Experienced Safety & Security management professional with 21 years of experience and benefitted from ISO, NEBOSH and military background. Management experience with large workforce.

I am a high-energy enthusiastic and dependable individual who excels in challenging and competitive environments.

qualification: bachelor degree in mechanical engineering, skills: Spares Planning, Man power planning Breakdown & Cost reduction by Productive maintenance/ Preventive maintenance. Working in team for achieving the targeted goals of organization. .

A highly motivated, professionally determined Petroleum Engineer with more than four years working experience with oil and gas exploration and production Company. Presently working with Petroleum Exploration (Private) Limited and independently handling production activities from all wells .

Mariner (Oil) with over 10 years of high quality shipping experience, now available and armed with Australian MBA, Six Sigma Green Belt, ISO 9001 Lead Auditor Certification, plus all other valid STCW'95; courses.

Installation, Operation and Maintenance Engineer (Mechanical)

International analytical chemist, expert in gas chromatography and continuous emission monitoring with an emphasis on the analysis of chemical agents and explosives, refinery and natural gases, and raw and finished petroleum products.

Field engineer in ge oil and gas

12 + Years HSE experience, 27 + years overall experience on International Oil & Gas projects, dedicated professional with a hands on approach to maintaining the highest possible levels of safety. Effective organizational and good training skills; Experienced in onshore & offshore Middle East; Asia

Experience in Oil & Gas Production and Petrochemical (Ethylene Plant)

Diploma of oil industry, hi diploma computer programing Many courses were taken in Training & development Department to improve work ability.

Worked in all phases of the industrial plants. In commisioning, start up and debotlenecking. As a process engineer, with experiencie in process, production, facilities and process control systems. Supervised group of 12 people, implement ISO 9000/1400, Osha 18000, economic evaluations and management

Chemical Engineer with 3 years Experience need a suitable job in Petrochemical/Chemical field

To become employed as a Process Operator

TO SECURE A POSITION IN WHICH MY EXPERIENCE AND SKILLS AS A REFINERY/CHEMICAL PLANT PROCESS TECHNICIAN WILL BE OF VALUE TO YOUR ORGANIZATION.

Ambitious, enthusiastic and career-conscious, I am keen to acquire new skills and form part of a successful team. I would like to travel and apply the skills learnt during my Geophysical Sciences degree. Seeking to embark on a long and successful career in geophysics.

To pursue an excelling career in an organization that provides challenging and responsible opportunities where my analytical and functional skills and abilities will be an asset.

Mainenance Operation Engineer.Experienced/ exposed to the activites like, QA/QC,SMS,ISM,ISO 14001 auditing,Environmental Regul's,ISPS and Insurance survey's.Trained and certified to Work in Dangerous cargo (Crude oil carrier) ships.Various kind of fire fighting system and techniqs are known.

I’m a Geoscientist with over 5 years of experience in the areas of: Seismic Exploration and Operations and Subsurface Geology in the field of Oil and Gas Exploration. I have master’s degree in Geophysics (Seismology) and Bachelor’s degree in Geology.

Drilling & work Over Supervisor, Master degree, 5 years experience in Offshore & Onshore operations

I’ve worked offshore in the South Pars gas reservoir in Iran as a Drilling and Production Engineer on board the Sagadril-2 /SPD-10 & Sagadril-1 /SPD-11

Senior Telecoms Technician, radio, satellite, rigger, cisco, networking, cabling, management, hf, vhf, uhf, microwave, tracking, it skills, wireless

5 years of experience as Drilling Engineer for Major Operator company in Denmark (North Sea Project) and as Drilling Supervisor for operator company in Turkmenistan.

PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

Environmental, permitting, regulatory compliance work. Mining, power plants, and transmission permitting work. Academic background in range science and ecology. Reclamation experience. Operations, corporate, and international experience.

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s

Seismic Data Processing (Up to PSTM, using Promaxtm &Vistatm),Quality control of Seismic Data Acquisition (using Promaxtm & Vistatm).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out