Resume - In-service / shutdown inspection of most of the static equipments in a plant, su...

Misco Jobs

Resume #64374

CONTACT INFORMATION:
View contact information...

Qualifications
------------------------------------------
Diploma in Mechanical Engineering (Passed in 1989)
ASNT Level-III in UT, RT, MT, PT & VT (ASNT, USA)
CSWIP 3.2 Senior Welding Inspector (TWI, UK)
BGAS Painting Inspector Gr. 2 (TWI, UK)
API 510 Pressure Vessel Inspector (API, USA)
API 570 Pressure Vessel Inspector (API, USA)
API 653 Above Ground Storage Tank Inspector (API, USA)
Diploma of European Welding Inspection Practitioner (EWF)
AWS CWI (Certificate validity expired)
Passed ISO 9001 Lead Auditor Course (1999)
Passed Radiation Protection Supervisors course
Vibration Technology Level-I by Entek-IRD-Bombay
(* pursuing B.S. Metallurgy thru' distance learning program)
---------------------------------------------------------------------------------------
Courses Attended
--------------------------------------------------------------------------------------
BOSIET (Warm Water Tropical) – OPITO approved (valid until 2010)
Breathing Apparatus Wearer / Confined Space Entry
Managing Hazards at the Workplace
Permit to work for Supervisors
Radiation Safety Course
(All the above courses are approved by Brunei Shell Petroleum Co.)
Risk Based Inspection Course conducted by DNV, Singapore (July 2007)

===================================================
Employment History
---------------------------------------------------
Period APRIL 2007 – AUGUST 2007 Employer PTAS Inspection & Testing Services, Brunei
Position QC Engineer Client BSP, BLNG
Reported to Contact Manager

Responsible to maintain and monitor company's quality system.
Preparation, updation, and maintainance of inspection procedures,
Responsible for maintaining inspection personnel qualifications in the company and to ensure all personnel are familiar with all quality requirements.
Trained and certified company personnel in general NDT, MT, PT, UT, VT and in On-stream Inspections.
Responsible to maintain all functions of the equipment calibration system.
Randomly audit and verify results of tests by NDT/Inspection staff at site.

Period MARCH 2001 – MARCH 2007 Employer PTAS Inspection & Testing Services, Brunei
Position SENIOR INSPECTOR (OFFSHORE) Client Brunei Shell Petroleum Co

Worked for Brunei Shell Petroleum in offshore platforms and in workboats, and carried out the following tasks:
Acted as company's site technical / administrative representative, and focal point for the company and liaising with client site representative.
Supervision of NDT / Inspection team, responsible for planning and distributing tasks to Rope Access Teams, Multi-discipline Inspectors and Radiographers on a day-to-day basis and ensuring that the work scope is completed in a safe and timely manner.
Planned and executed Corrosion / Erosion monitoring & Base Line Surveys on flow lines, pressure vessels.
Performed on-stream inspection of pipe works, vessels, structures, risers, tanks & other static equipments / valves / accessories using visual, ultrasonics, magnetic, penetrant and radiographic testing at shell's onshore / offshore facilities.
Identified, reported and assessed anomalies for further action or monitoring.
Supported Shell Plant Inspectors by providing technical guidance on every day issues.
During shutdown campaigns / modification projects, monitored contractors' repair / modification works on behalf of client.
Planned resources (man-power and equipments) for the execution of all kinds of inspection tasks in my area.
Worked and familiar with PACER / CIRRAS system.
Acted as Radiation Protection Supervisor for my area and HSE site representative.
Identified structural anomalies and prepared work scope on-site for the workboat crew.
Monitored and inspected contractors' repair works, carried out / monitored required NDTs as per BSP requirement.
Prepared QC documents and certified contractor's works after completion of the scope as per BSP requirement.
Assisted engineering and construction section for modification repair / renew welding and painting / coating of plant equipments. Pre-commission verification and coordinate with commissioning team.
Monitored subcontractor painting & coating activities and inspection of surface preparation, monitoring of weather condition, paint application, film thickness, visual, adhesion test, pinhole & holiday detection.

Period Dec1999 – Feb 2001 Employer Consolidated Contractors International Co. (CCIC), Abudhabi
Position Senior Inspector (Welding/Piping) Project ADNOC–OGD II Project, Abudhabi UAE
JOB DESCRIPTION
Welding inspection of Carbon steel and LTCS pipe works and structural steel works both at Shop and field.
Prepared daily welding reports, monitoring welders' performance.
Coordination with NDT/PWHT personnel.
Witnessed NDEs and PWHT.
Responsible for QC release of prefabricated spools for painting / erection at site.
Line check prior to pressure testing, making as-built drawings and witnessed Hydro tests.
Verification of ITPs and piping QC isometrics.

Period November 1998 to May 1999 Employer Chiyoda-Foster Wheeler & Co
Position QC Inspector (Piping/Welding) Project Oman LNG

JOB DESCRIPTION

Monitored subcontractor's piping fabrication and erection activities at shop and site. Materials handled – CS, LTCS, SS.
Surveillance of welding parameters for various SS materials.
QC release of prefabricated spools to painting / PWHT depending on the requirement.
Witnessed NDEs, PWHT, PMI Testing, Leak Tests, etc.
Verification of materials used during fabrication.
Review and approval of QC isometric packages and test packages.
Reported non-conformances.

Period JULY 1993 – OCTOBER 1998 Employer Southern Petrochemical Industries Corporation, India
Position QC Inspector (Mechanical) Project Various clients in India (ONGC, GNFC, GSFC, IFFCO, NFCL, DFCL, various,)
JOB DESCRIPTION

Inspected ammonia storage tanks, pressure vessels in ammonia / urea plants.
Shut down inspection of pressure vessels, storage tanks, reformer tubes, heating coils, etc. Inspection techniques used – visual, MT, PT, UT, RT, Metallography, vacuum box, hardness, etc.
Performed welding inspection and NDEs (UT, MT, PT) on new fabrications and on maintenance / repair welding on static and rotating equipments' parts.
Materials handled – CS, Cu-Ni, SS, DSS.
Prepared Welding procedures, conducted / witnessed procedure / welder qualification tests.
Prepared NDE procedures.
Performed Dynamic Balancing of turbine, compressor, pump rotors and crank shafts.
Performed vibration measurement, monitoring, diagnosis/trouble shooting on rotary equipments such as turbines, centrifugal compressors, centrifugal pumps, blowers, fans, etc.
Actively involved in getting ISO 9002 certification. Written Level-3 Work Procedures/ Instructions, assisted the company in preparing Level-1 (Quality Manual) and Level-2 (Departmental System and Procedure) manuals, designed Inspection report formats.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 2726)

Go to Search Parameters...

Brief Description

Project Management / Production Control

Dynamic professional Process Engineer with fours years of experience in production, planning and control, process optimisation and man management in base metals refinery. Proven technical capabilities in hydrometallurgy, electrowinning, pyrometallurgy, process control and management of new process

I have been working for the same company for 10 years in different divisions. Right now I am a crane driver/operator. Who is always up for a challenge.

A results-oriented Analyst combining hands on management consulting, project finance, market analysis and mining operations experience, I provide actionable advice for the key business decisions that enhance competitive positioning.

Iam an Indian National . Iam sailing as 2nd Officer In P.S.V in Gulf Offshore. I Hold COC issued in U.K

Extensive and progressively responsible hands-on management experience.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

BE,MBA graduage having 13+ years experience in Sales & Marketing of Engineering, Flow Control & Instrumentation Process Products

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Over 20 Years experience in International and Domestic assignments in the Electrical and Instrumentation Fields. Assignments internation-ally have been in Project/Construction management, Supervision, QA/QC and commissioning. Project experience is diverse and in-cludes mining and extraction/ recov

In-service / shutdown inspection of most of the static equipments in a plant, such as pipe works, pressure vessels, hydrogen crackers, reactor vessels, storage tanks, reformer tubes, risers, topside structures, well head parts, valves, etc. , Inspection of all plant construction related activities

I could do a job that deal with Operation Geologist and Development Geologist

12 Years Maritime Experience • Crew Training and Management implementing. Marine Safety, Salvage, Port and Offshore Operations • Policy and Procedure Enforcement/Compliance

Engineering graduate experienced in installation ,pre-commisiioning ,commissioning

Geologist

Application for Heavy Equipment operator and mechanics.

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

A dynamic professional with over 18 years of rich experience in Procurement, Vendor Development and Inventory Control.

Controls I&C Engineer

Project Controls Cost Engineer / Analyst (EVMS, Change Management, Cost Forecasting Planning and Budgeting)

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

29 years experience in all phases of building trades construction. I have specialized in residential plumbing, new construction, repair, renovation and commercial pipefitting.

Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.

To obtain a challenging position that utilizes proven experience and skills.

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

Electrical engineer (electronics) experience in the equipment of the Processing and quality control Activity area: Petroleum (2D & 3D land seismic data acquisition), skills: problem solving, self motivated, able to work under pressure in a challenging and a diverse cultural environment

PLC, HMI, SCADA, SENSORS

To your team I bring business, economic and industrial development knowhow. To complexity I provide logical reasoning and cultural competency. I apply monitoring and evaluation research methods and tools. My thought-work enables decision-making. It maximizes impacts, outcomes, and change.

Have certificate in Mechanical Engineering drafting with 12years experience in handling Autocad programme. currently based in Riyadh, KSA and handling drawing for Architectural, C&S & MEP.

I am an experienced gas plant operator and a well test night operator and have been in the oilfield for almost 6 years. I have 3 years of sour service experience

B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.

Drilling professional for 20+ years; extensive international well construction supervisory experience; directional, drilling engineering and management experience; drilling project manager of China’s first horizontal multilateral CBM well.

Telecommunications Engineer, with Bsc. In Telecommunications and Electronics, present occupation on Telecommunications Network Resource Management, Planning & Design Telecommunication Circuits Serving Electrical Networks. Consultant Engineer: Alarabi Engineering Consultants.

Senior Electrical Engineer with over 20 years of manufacturing, industrial, chemical, and power plant field experience.

I have extensive experience in Environmental Sciences. I wrote my Thesis between the Universities of Zaragoza and Bordeaux 1 (France), which gave me the ability to work with people from different countries.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

Previously I work offshore with SEDCOFOREX (M) as a Trainee Driller. I was under the training program which was called Apprenticeships Training Programs. I experienced working on the barge and drilling platforms. The job's scope involved was Rousabout and Floorman.

Nace level 3 coating inspector, CINI certified insulation inspector & Chartek certified fireproofing inspector.

Specialise in safety valve and Gas Litf and also wireline operator in Malaysia

Integrated Buidling Systems Manager, Project Manager, IT Manager, CMMS

Rotating Equipment Engineer with 9 yr Experience

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

I am hard working and dependable Software Engineering graduate with the ability to work well both independently and in a team. i have 3 year international experience in Mud Logging. OIL AND GAS, i can work anytime anywhere to serve my ability for company and i am sure i am the rite person to deserve

laboratory, mechanical, electrical, computer, supervisory and leadership skils

13 Years with Onshore & Off shore, OIL & GAS refinery & Shutdown .

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

Well experienced in Document Controller & Secretarial jobs in Construction and Petrochemical companies in different Gulf countries. Knowledge of operating M.S. Office and Acconex. Currently working as Document Controller in Dubai Metro Rail Project, UAE since 1-1/2 years.

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Safety Supervisor , HSE Supervisor for all oil/gas, Pipeline, Offshore Construction, civil Construction

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out