Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #65616 next resume »»
CONTACT INFORMATION:
If you don"t see contact information, please log in first.

Career History

Self Employed (1986 ¡V Present)
Independent consultant offering project management at the office or field levels both domestically (Canada) and internationally. The following outlines contracts and responsibilities I have undertaken.

Operations Superintendent
Verenex Energy Area 47 Libya Ltd, Tripoli, Libya
(07/2007 ¡V Present)

Promoted to this position to support the Drilling/Completions Superintendent and the Drilling/Completions Manager with the overall management of a 3 rig operation in Libya.
Duties included;
* Frequent visits to field to assess operations. Listen and react to concerns.
Develop go-forward plans.
* Promote safety initiatives and ensure safety compliance. Follow up on incidents/accidents
* Explain and ensure compliance with directives dispatched from office.
* Scouting of new locations.
* Report findings of field trips to management.
* Liaise with service company management and representatives.
* Assume roles and responsibilities of D&C Superintendent and/or D&C Manager as required. One or both roles almost each shift.
* Locate and assess locally available services, material and equipment for suitability.
* Assist D&C Engineer with programming, reporting

Drilling/Completions Engineer
Verenex Energy Area 47 Libya Ltd, Tripoli, Libya
(11/2006 ¡V 07/2007)

A start up Exploration company with first venture operations in Libya.
Duties included;
* The development of drilling and completion/testing programs for a 3 rig operation
(2 drilling, 1 testing) located +/- 400 km south east of Tripoli, Libya drilling wells to +/- 10,000 feet with multi zone testing programs.
* Researching and providing solutions for safety and operational concerns for drilling and completion problems encountered.
* Auditing of service company performance.
* Reviewing and developing a familiarity with active contracts.
* Maintain cost control information as well as drilling curves.
* Working with National personnel
* Assisting Drilling/Completions Superintendent with operational matters.
* Reviewing service company invoices.

Engineering done between wells 1 and 2 allowed the company to reduce drilling problems and reduced drilling days by 40%. Cost control measures allowed more accurate cost estimates and allowed forensic analysis for drilling and completions projects.

Drilling/Completions Consultant
Duvernay Oil Corp, Canada
(08/2005 ¡V 11/2006)

An aggressive medium sized E&P company operating in the "Deep Basin" area of North Central Alberta.
Duties include;
The safe and successful execution of multi-zone gas and gas liquids completions on HPHT wells with an average depth of 3200 meters and up to 7 zones.

Responsible for the safety and direct supervision of operations including;
* Logging and Perforating
* Fracture Stimulation
* Snubbing
* Coiled Tubing operations
* Slickline operations

Tasked with conducting completions operations on these wells "Rigless" to evaluate the economic and operational viability of doing the above noted operations without the use of a service rig.

Drilling Manager
Petro Vietnam, Algiers, Algeria
(03/2005 - 04/2005)

McGinnis, Codd & Associates (MCA) provided engineering services to both domestic (Canadian) and International operators.

Contracted by MCA to work in Algiers, Algeria in the capacity of Drilling Manager for Petro Vietnam during their onshore drilling campaign. Although the title of the position was Drilling Manager, overall responsibility included management of logistics and procurement, geology, engineering and operations.

Tasks included;
* Coordination and management of the aforementioned departments
* Presentations to management and their partners, Sonatrach
* Bidding, Analysis and Evaluation of services.
* Day to day management of rig operations to ensure that the program approved by management and partners was followed.
* Field operations troubleshooting.

Petro Vietnam successfully drilled and completed their minimum required wells (as per contract) during their first venture in to Algeria.

Drilling/Completions Specialist
Newsco Directional, Mumbai, India
(02/2005 - 03/2005)

Contracted by MCA to travel to Mumbai and Duliajan (Assam state), India to assist Newsco Directional in the preparation of a turnkey proposal to drill and complete a number of horizontal oil wells for Oil India.
Duties included;
* Evaluation of current production methods and their viability on a horizontal well application.
* Developing recommendations for production methodology of proposed horizontal wells.
* Well history and production data research.
* Assisting with locating services outside of India.
* Providing casing designs.

Drilling Manager
Centurion Energy/Maretap JV, Tunis, Tunisia
(10/2004 - 01/2005)

Contracted by MCA to work in Tunis, Tunisia as Drilling Manager for Centurion Energy and their JV partner, Maretap on their concession in Tunisia during the 2004 drilling campaign.
Duties included;
* Developing scope and details for proposed drilling prospects for onshore and offshore jack-up projects.
* Development of Request for Quote documents, technical and commercial analysis and evaluation of same

Detailed operations included;
* Preliminary site surveys
* Casing design and procurement
* Identification of pertinent applicable regulations
* Rig selection, assessment and procurement
* Drill string design, BOP design
* Operation cost estimates
* Drilling procedures
* Cement and mud design
* Recommendation and implementation of specialised technology
* Day to day rig operations management
* Preparation of interim and End of Well reports

Programmed a proposed 5200 meter well planned for drilling in 2006.

Drilling/Completions Consultant
Duvernay Oil Corp, Canada
(09/2002 ¡V 09/2004)

An aggressive junior E&P company operating in the "Deep Basin" area of North Central Alberta.

Duties include;
* The safe and successful execution of multi-zone completions on HPHT gas wells with an average depth of 3200 meters and up to 7 zones.

Responsible for the safety and direct supervision of operations including;
* Logging and Perforating
* Fracture Stimulation
* Snubbing
* Coiled Tubing operations
* Slickline operations

Business Analyst ¡V Software Development
Husky Energy Inc, Canada
(10/2001 ¡V 09/2002)
Contracted by Husky Oil to assist with the implementation and integration of a "Well Life Cycle" data capture and reporting software system.

Duties included;
* Auditing existing well data for inclusion into database
* Auditing application for compatibility with client requirements.
* Workflow analysis
* Data conversion analysis and testing.
* Auditing of troubleshooting documentation meant for end user.
* Preparation of test scripts
* Installation and testing of application on a variety of computers and operating systems.
* Training and troubleshooting with end users.

During initial roll out and 5 months following I was tasked with functioning as single point of contact for any and all field computer issues.
The software was successfully rolled out to +/- 70 drilling and completions field personnel with no major down time.

Completions Consultant
Northstar Energy/Devon Canada Corp.
(02/2000 ¡V 10/2001)

Provided field supervision of completion and workover operations on operated wells throughout Alberta. Assigned work on a variety of wells from shallow sweet gas to high pressure and critical sour.

Student
(01/1999 ¡V 01/2000)

Enrolled in a 9 month high intensity computer programming course and earned a diploma in Applied Information Technology.

Operations Manager/General Manager
Mercantile Peru Oil & Gas, Talara, Peru
(02/1997 ¡V 09/1998)

Moved to Talara, Peru to undertake duties as Operations Manager.
Responsibilities included;
* Building a team of production-oriented personnel to operate and optimize production from rod pumping and swab produced wells.
* Working in conjunction with a staff of 14 national engineers to develop reactivation, drilling and completion programs with a view to reducing costs and implementing engineering controls.
* Costs were reduced by up to 50 % and success rate increased by 25%
* Initiating and supervising the introduction of a computerized inventory system.
* Administering and organizing an 80 well reactivation program, 25 well drilling program and production facilities expansion for 1997.
* Supervising the development of technical requests for materials and supplies.
* Supervise the development of AFE's for drilling and completions projects.
* Developing a timeline for the importation of all required services and supplies.

Promoted to General Manager
Responsibilities included:
* Liaison with Government and Regulatory authorities.
* Preparing and administering of budget.
* Initiating the development and use of a computerized accounting system to better manage the business of the company.
* Develop professional development initiatives for administrative and operations personnel.
* Integrating the assets and personnel of another company into the existing company.
* Reducing operating expenses through staff rationalization and improved production controls. Initiatives reduced expenses by 30% within 4 months.
* Coordinating contingency plans, operating procedures, evacuation and health plans for
National and Expatriate personnel during the torrential rain and flooding caused by the
El Nino in late 1997 and early 1998.
o At the height of the rains, with 90% of the wells inundated, production was maintained at 50% of the pre-rain production. No equipment or infrastructure in the field was lost.
o No loss of life and no staff or their families suffered from the diseases prevalent during the crisis.
o Food, water, transportation and basic medical supplies were provided to a village of approximately 650 people situated within the operating area.

Completions Consultant
CanOxy Petroleum ¡V Yemen
(08/1994 ¡V 01/1997)

Supervised completions and workover operations on a rig in the Peoples Democratic Republic of Yemen for CanOxy.
* Responsible for rig, rig personnel, camp, camp labor and support personnel assigned to the rig and camp.
Duties included:
* Supervising the safe and timely execution of well completions and workovers.
* Assisting and problem solving of technical concerns during the planning of completions and workover projects.
* Training and monitoring of Yemeni Nationals in completion and workover operations.
* Developing and maintaining inventory controls.

Operations Superintendent
Czar Resources Ltd, Canada
(08/1993 ¡V 10/1993)

Undertook these duties as Operations Superintendent to allow the incumbent to take vacation.

* Preparing and submitting government forms for local and inter-provincial drilling and completion operations.
* Engineering and programming of drilling and completion operations for horizontal sour oil wells being drilled in remote locations.
* Engineering and programming of drilling and completion operations for directional wells being drilled.
* Preparation of Emergency Response Plans for sour drilling and completion operations.
* Procuring rigs and all support services.
* Maintaining 24-hour availability for all field operations.

Drilling Superintendent/Safety Coordinator
Czar Resources Ltd, Canada
(10/1993 ¡V 03/1994)

Undertook this dual responsibility role for Czar out of their offices in Fort St. John, B.C during the winter drilling season.

Duties included:
* Ensuring all personnel and contractors performed their duties safely and in accordance with current safety regulations.
* Conducting safety audits of field process and rig sites.
* Scheduling of regular safety meetings to promote safety.
* Providing technical support.
* Procuring services and equipment as required for on-going drilling and completions operations for;
„X Horizontal sweet gas wells.
„X Horizontal sour, oil and gas wells. (1% to 5% H2S)
* 24 Hour On-Call for all field operations.

Rig Supervisor
CanOxy Petroleum ¡V Yemen
(06/1991 ¡V 08/1993)

Rig Supervisor on a drilling/workover rig in the Peoples Democratic Republic of Yemen.
* Responsible for the care and control of a 50 man camp, all labor and support personnel including rig and support facilities.

Duties included:
* Supervising the drilling of large diameter surface holes and water wells utilizing hammer bits, stable foam and air.
* Conducting high rate flow tests utilizing Electric Submersible Pumps with complex downhole assemblies for accurate reservoir evaluation.
* Planning and executing Cased Hole Drill Stem Test work utilizing several tubing movement and pressure actuated valves.

Additional Projects

Technical Co-Writer
Winterhawk Petroleum Consulting Services
1989

Co-wrote a drilling manual for the Chinese National Oil Company.
* Used for the training of supervisory and rig personnel.
* Detailed the operation and maintenance of a drilling rig and all associated equipment.
* Written in non-technical English to facilitate translation.

Technical Advisor
Winterhawk Petroleum Consulting Services
1988

Technical Advisor during the production of a video outlining the prevention of oilfield theft.
* Used by government, police agencies and major oil companies.
* Goal of the video was to help personnel recognize and prevent oilfield theft.

Technical Co-Writer
Canadian Energy Research Institute
1986

Technical Co-writer of a comprehensive report presented by the Canadian Energy Research Institute.
* Written for the Federal and Provincial Governments
* Outlined the effects of oil pricing on industry employment levels.
* Used as a guide during the development of incentive programs for the oil industry.

Marketing Representative
Computalog Ltd.
1985

Traveled to Tripoli, Libya to assess markets and logistics for an Open Hole and Cased Hole logging operation in Libya.
* Marketed the services of the company.
* Presented technical overviews of available services to active operators.

1984
Sold completion and production logging units plus support equipment to Aramco Services, Saudi Arabia.
Duties included:
* Technical guidance during the fabrication and assembly of the units in Canada.
* Function testing of all units.
* Preparation and packaging of equipment and spare parts.
* Preparation and disbursement of all related paper work..
* Coordinated shipment of equipment from Calgary via Houston, to Saudi Arabia.
* Traveled to Saudi Arabia to assist with equipment checks.
* Instructed Aramco personnel on the systems and equipment.

Production Logging Supervisor
Gearhart International - Venezuela
1981-1982

Operated a wireline unit on Lake Maracaibo, Venezuela for Gearhart International.
Duties included:
* Preparation and calibration of well logging equipment prior to jobs.
* Collecting and interpretation of Production Log data for clients.
* Supervision of National personnel.

Production Logging Specialist
Computalog Ltd.
1978-1980

Collected data at the Research and Test facilities, Fort Worth, Texas.
* Maintained test facility.
* Analyzed quality of collected data.
* Diagnosed and trouble shot equipment failures.
* Developed production logging interpretation graphs and charts for use by the company.

EDUCATION

1987 - Certified Engineering Technician (Petroleum) - Alberta Society of Engineering Technologists
Awarded certification from this organization following an evaluation of the type and content of my work and achievements.

2000 - Applied Information Technology Diploma - Information Technology Institute
Earned this diploma following the successful completion of a 9 month high intensity computer programming course.

PROFESSIONAL DEVELOPMENT

Languages
* Fluent in Spanish language.
* Working knowledge of Arabic language.
* Working knowledge of French language.

Certificates and Training
* IWCF Combined Surface & Subsea BOP Stack ¡V Supervisor Level
* Second Line Well Control Certificate
* Well Servicing BOP Certificate
* Regulatory Awareness for Wellsite Supervision
* Safety Management for Wellsite Supervision
* H2S Alive Certificate
* Workplace Hazardous Materials Information Systems
* Transportation of Dangerous Goods
* Confined Space Entry
* Safety Oriented First Aid
* Ground Disturbance

1993 Level I Firefighting, Safety Boss
1986 Primary and Remedial Cementing, Canadian Fracmaster
Packer Completion Techniques, Guiberson Oil Tools.
1983 Introduction to Reservoir Engineering, CIM
1981 Blaster's Permits, Alberta and British Columbia.
1980 Production Log Evaluation, Gearhart Industries Inc.
1975 Radiation Handling Certificate, Atomic Energy Commission.
Completion Services Supervisor, Dresser Atlas, Canada

MEMBERSHIPS
Society of Petroleum Engineers (Associate)
Alberta Society of Engineering Technologists

REFERENCES
Available on request.
«« previous resume next resume »»
Search Results (Resumes 751 to 800 of 2722)Go to Search Parameters...
Brief Description
I have 28 years experience in the drilling & completion industry. I have worked as a operations manager, drilling superintendent, drilling consultant, directional & horizontal supervisor. I have 10 years offshore experience. I have hpht, 25000'+, h2s, deviated hole experience
OBJECTIVE To offer total drilling management experience in radial, multi-lateral, horizontal, underbalanced, directional and conventional drilling techniques.
30 yrs oilfield experience, both onshore & offshore working in the Middle East (at present) Libya, Indonesia, Iran, Saudi Arabia and Australia. Have TDS experience and have worked on fully Automatic Rigs. For more information please see full resume.
Mechanical engineer and safety engineer diplomas , I’m looking for a safety position in an oil and gas company worldwide ....available , and able to relocate , preference Africa and Middle east ( UAE, Saudi Arab , Brunie, Qatar, Kuwait , Algeria ...) ,
To obtain a career in the chemical or environmental fields. I have the acquired the experience, education and skills required for a variety of positions.
During 20 plus years of progressively responsible experience in the oil and gas industries, I have worked in many positions, such as transportation, drilling, exploration, production, purchasing, budgeting, and management. In my last position as an Operations Manager.
- Well planning (drilling & completions): casing design, programming, operations supervision – onshore and offshore. - Project management - Expert adviser on wellbore stability and stuck pipe issues. - Quick log interpretation and other wellsite petroleum engineering responsibilities
I have been working in qatar petroleum as senior operator in onshore based
Over 26 years supervisory experience,16 of which are with major foreign oil companies pre-commissioning, commissioning, start-up, operations, training, competency testing, task analysis and procedure generation in the Onshore and Offshore Oil and Gas industry.
Diploma Chemical Engineering. Trained and experienced in Well Operation, Otis Panel, Production & Gathering Station, refinery, petrochemical process operations, Communication skills, Computer education, organizational skills. Giving training to Omani line staff.
8 months running mud motor, 3 years pushing tools, 18 years drilling, 2 years derrickman, 1 year floorhand-certified diesel mechanic
Production Adviser/Relief Superindent: over 20 years exp in the Oil& Gas Industry
Twenty-eight (28) of experience world wide in the drilling of exploration and production wells, also in work-over and completion operations. Looking for either a well site supervisor position or superintendent of operations.
More than 26 years of experience in the Oil & Gas industry, with particular specialisation in Contracts and Procurement disciplines. Braod International experience, good technical and managerial skills, good knowledge of foreign languages.
25+ years of Chemical Plant experience. Veteran. Innovative thinker and problem solver. Excellent communications skills and I work well with others. Limited gas/oil experience, but, a fast learner and looking for a chance to learn new things.
Have gained experience offshore on FPSO with minimum manning policy, hoping to develop this experience further.
Looking for position as Rig Superintendent on DP Vessel or Semi(Worldwide).
20+ years oil/gas experience. Drilling/completions supervisor, environmental/regulatory/safety specialist. Worked in Rockies, Permian Basin, Anadarko Basin and East Texas on wells from 2,000’ to 23,000’.
Worked in oil fields for 22 years - from floors to tool pushing. Am presently looking for a position in the United States or overseas.
Experienced offshore hand with mechanical and electrical background looking to re-enter the oil field. Recently completing a course in Technical Limits, an efficiency program to help manage and facilitate supervisors, and workers alike to improve overall performance of the well program.
Operations Commissioning Petrochemical Oil Gas experience. 29 Years In Industry
To obtain a career in supervision or management with a growth oriented organization that will allow me to utilize my expertise in the areas of retail or safety management and administration.
I have been employed by Chevron for the last 24 years. With the Chevron/Texaco Merger I accepted an enhanced severance package. I have held various senior supervisory positions within Chevron, and I am now seeking a position that would match my skill sets.
Experienced in Natural Gas Processing. Pipeline Construction, Operation and Measurement Supertanker Terminal Operations Supervision.
All phases petroleum supervisor. 25+ years of experience in the oil and gas industry. strengths: rig supervision, completion, workover, production.
Over 17 years pre-commissioning and commissioning experiences with proven experience in working with utility & power plant equipments.
Comprehensive problem solving abilities. Excellent verbal and written communication skills. Ability to deal with people diplomatically, willingness to learn and team facilitator.
Free! A motivated self starter and team player/builder with 30+ years of Canadian and International upstream oil industry experience. Skilled project manager and problem solver. High level of computer literacy.
I have 10 years experience in the oild industry. 5 years as driller and 6 months as Relief Tool Pusher. I amready to go to work as soon as possible. I have my current Well Control and Passport. I have H2S training, Fall Protection, & First Aid
Currently seeking a “Drilling Operations” position , internationally within the upstream petroleum industry
Seismic Data Processing QC, Supervision and Management experience. International experience in Northa nd South America and Europe. Experience with artic data, high-resolution surveys heavy oil suveys, shallow water, TZ, and complex over-thrust data.
Experienced hands-on person, who has worked in GOM, Asia, Middle East, Africa, and Canada. Managing and Optimizing of Multi-Million Dollar Inventories both onshore and offshore.Trained in multiple Procurement/Maintenance Management software systems.
11 Years Exp in Oil Terminal and well versed in Tank Farm and Oil Movement operations
Have several years of offshore experience in oil and gas operations. Responsible for hookups, start-ups, overseeing construction crew, MMS audits and special projects. Experience in trouble shooting problems dealing with production equipment, pneumatics/electrical panels and gas compressors.
Free! field engineer possess floor and field experience in heavy gas turbine engines such as General Electric different model (GE Frame 5, 6, 7 and 9), Rolls Royce, Siemens and Mitsubishi.
I want to improve my skill and knowledge, get good experiences about exploration and production,Drilling Prosses (Over Balance and Underbalance Drilling System), surface production facility and processing plant including Sulfure recovery unit (SRU),Back pressure Valve for safety Rig Drilling and wor
HSE, H2S, Fire fighting, Fire protection, Inspection, Rig or Plant, Off or on Shore
Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor
I'm a Mechanical Engineering Graduate with vast experience in oilfield static and rotating equipment operations and process drawings
Able to operate and maintain well and familiar with typical oil / gas production flowing well, Sub Sea Well and Gas lift well.
Oilfield skills
Looking for Mud logging Geologist Position
Senior Completions / Intervention Lead Engineer with over thirty year’s extensive experience
Petroleum Engineer with circa three years of diversified experience, mainly in well completions, liners, sand control, subsurface safety system, inflatable packers and flow control. Designed well completions, liner hangers, and gas lift system as per client requirements. Run Liner hangers and casedh
Engineer with extensive experience in drilling, completions, workovers, stimulations, design and construction of pipelines, gathering stations, compressor stations, gas plants, oil batteries, tank farms, metering stations, gas sales contracts, senior oil and gas company management
Act as Loading Master during Pre-Loading Meeting
A Chemical / Process / Polymer Engineer with a Masters Degree in Chemical Engineering (performed industrial research on polymer processing) from the University of Waterloo, Canada and 10+ years experience in polymer and natural gas processing industries.
Chemical Engineer, Process Operator,
OFFSHORE PROCESS,FPSO OPERATION,SAFETY AND TRAINING AND WORKOVER OPERATIONS
I'm a diploma holder in Chemical engg with total 8 years of experience in Oil & Gas field, I had worked for 5 years in Relaince Industries ltd in Refinary tankfarm, 1.5 years in ESSAR oil ltd in Refinary tankfarm & presently working in SHELL's LNG terminal at hazira, surat since Oct-2007,
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   [ 16 ]   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Operations;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com