Resume - Looking for Entry Level Job Into Oil Industry

Misco Jobs

Resume #67845

CONTACT INFORMATION:
View contact information...

DATE OF BIRTH 31 MAY 1980
.
MARITAL STATUS Married

SCHOOL ATTENDED Thorney Close Comprehensive School

QUALIFICATIONS English Language,
Mathematics, General Science.

FURTHER EDUCATION Ryhope Training Center
Brick laying

On Site Training for Double glazing Fitter

QUALIFICATIONS NVQ 1 NVQ11 in Brick Work
CSCS CARD IN Double glazing fitting

CARREER SUMARY

1996-1999 RYHOPE TRAINING – NVQ IN BRICK TRAINING – TRAINED AS AN APPRENTICE FOR 2 YEARS AND TRAINED TO ALL ASPECTS ON THE BUILDING TRADE.

1999-2000 TRAINEE ENGINEER – MARKING OUT FOR RAILS TO BE LAID FOR A NEW METRO

2000-2001 LABOUR/TRANEE IN WINDOW FITTER
TRAINED TO RIP OUT AND REFIT WINDOWS AND DOORS, TRIM OFF INSIDE AND OUT DOUBLE GALZING UNITS, FACIALS AND GUTTERING. ALL ASPECTS OF FITTING.

2001 TO PRESENT IN DOUBLE GLAZING FITTING
SUB CONTRACTED TO

2001 TO FEB 2007 P.D. COYNE
FEB – APRIL 2007 ANGLIAN WINDOWS
APRIL – MAY 2007 YORKSHIRE WINDOWS
MAY 2007 TO PRESENT KILBANE

RELEVANT CERTS OPITO APPROVED
SAFETY INDUCTION AND EMERGENCY TRAINING
Offshore Medical Certificate.
PERSONAL PROFILE Lively, enthusiastic individual who can well within small or large teams
Thrives within a pressured environment and disciplined working to goals and deadlinesVersatile and adaptable, accustomed to change
Dedicated, productive asset to any company
I have my own van and tools.
I have liability insurance to cover all aspects of work.
I do not mind being away from home for long periods at a time.
I work well under pressure.
I can be left un-supervised to get on with my work.
I am safety conscious about myself.
I can take and carry out orders.
I can carry my orders out effectively

HOBBIES. I enjoy watching sports, including fishing and wildlife and football.
I am also interested in socializing with friends.

REFERENCE ON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 2461)

Go to Search Parameters...

Brief Description

I am a Metallurgical Engineer with knowledge in Technology Management. I have developed skills either through training or work experience in Failure Analysis, Metallography, SEM, Thermal Treatments, Power Tools, Mineral Processing, Microsoft Office Suite, Costin, Estimates and Business Development.

I have a degree in geology and have also a number of skill sets from the business sector. I have lived abroad and am no stranger to living in remote places & below average living conditions. I have had previous offers for core logging jobs in australia, but was working for another company then.

Geologist

I am Vaka Vasavi, at the verge of finishing my Masters in GIS at UT Dallas. Currently working on my Master Project which will conclude my course work at UTD, at the same time I am looking for an internship/Fulltime position in a organization which would benefit from my GIS knowledge, skills and

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

PDS Administrator

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 GAS Production trains to 4 GAS marine offloading systems

Rigger position

MECHANICAL ENGINEER HAVE MORE THAN 9 YEARS EXPERIENCE WITH WITH RANGE OF EQUIPMENTS . IN MY RECENT JOB, I AM RESPONSIBLE ABOUT SCHEDULING AND PERFORMING TH PREVENTIVE AND CORRECTIVE MAINTENANCE OF TWO VESSELS AND OIL POLLUTION CONTROL EQUIPMENTS .

Quality dozer/blade/excavator operator in all aspects of construction

Geotechnical Engineer specializing in rock/soil engineering and numerical modelling, based in Vancouver, Canada. Looking for a challenging career opportunity worldwide in natural resources sector, civil/mining geotech consulting or academia.

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

BSc + Fire + Safety + Experienced

ACZ Licence. I am looking for a new career and a better future for my family.

B.E (Mechanical) with 3 years of experience in automobile industry (sheet metal), good working knowledge of Pro/Engineer, Pro/intralink and exposure to Catia V5.

Project Control, Corporate Treasury, ERP Application Consultants

Thirty years as city of Winnipeg Fire Paramedic Service working through the ranks to a position of Captain . Knowledge of field and operation within emergency field.Experience in organizing and directing personnel. Extensive training in safety sector as National Construction Safety Officer and Consc

Over 7 Years Military Experience in the Petrolum Supply Specialist Role. Have succeeded at various jobs in Sales, Marketing, Insurance and Mailroom Processing.

I have a cumulative of 5 years field work experience and my experience varies from manufacturing/processing environment to Information Technology and Oil & Gas.

I am a target oriented, highly motivated, hard working and communicative person, I have Leadership skill, I am speak English. In addition to the above qualification, I am also familiar with computer program and have the ability to work in team. I have an Experience In belt system maintenance and equ

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

Experienced construction project manager with heavy background in petrochemical production operations

Electrical Technician

I am seeking a challenging and promising professional career in the field of Electrical Engineering in which I can utilize, practice and build on both the theoretical knowledge I gained through my academic studies and the accumulated practical experience

A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore: - Jack-Up platform (as Barge Master, Rig Mover ) - DynamicPositioning (DP2 Dive/ROV) - Heavy-Lift Constrcution/Offshore Installation/Platform removal/Pile Driving - SEMISUBMERSIBLE Units (as Barge Master)

Result-driven in Civil Engineer with seven (7) years technical experience in Construction of Oil and Gas, Petrochemical, Industrial Oil Petroleum Refinery, LNG trains onshore facilities and Residential/Multi-Storey Buildings Development Projects.

Graduate with Bachelor Degree in Science Surveying and Geomatics (Hons) from Universiti Teknologi Mara Shah Alam

Petroleum Technician

Experienced in Procurement, Supply & Engineering Management

Chemical Engineer. 2 years experience in minerals refinery and processing plant with BhpBilliton Nickel West - Australia. Responsible in production on day to day basis. Familiar with pumping, mass and energy balance, hydromettalurgy, ball mills, hydrocyclones, Hysys, LNG, Gas sweetening process.

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Graduate in chemical and electrochemical engineering one of the unique course offered by central electrochemical research institute in elecrochemical science , having professional expertise in various electrochemical area with CGP of 7.934 looking for a challenging career in reputed organisation .

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

BTech Electronics and Communication Engineer having 4 years experience in Operation and maintenance of Power Substation.Also have Post Graduate Diploma in Advanced Computing.Knowledge of PLC Programming and Applications and SCADA Programming and Applications.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

Looking for Entry Level Job Into Oil Industry

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting

I have excellent administration and communication skills, quick learned and trustworthy

To be part of a strong team of intellectuals saddled with challenging tasks, targets and responsibilities requiring a high degree of dedication in a conducive and friendly environment that upholds the tenet of customer satisfaction without jeopardizing profit and standards.

M.Sc (Bio-chemistry), having 4 years experience and seeking assignments in the field of Effluent treatment Plants ,Water & Waste Water Management,Chemical & Pharma Industries,Laboratories, Educational Institutions,Research Centers,Palm Oil mill effluent and other major applications

Advanced machine operator/ intermediate maintenace technican skills

Heavy Mobile Equipment Mechanic/Welder/Driver

Civil Engineer

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Bachelor of Technology in Polymer Technology :Autocad ,Polymer Testing & characterization,windows,MS office;Innovative and Leadership skills.

Experienced Production Supervisor and Plant Projects

Process Metallurgist with a strong academic background. Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out