Resume - Open Crane Operator and Advanced Rigger

Misco Jobs

Resume #67969

CONTACT INFORMATION:
View contact information...

Open Crane Operator and Advanced Rigger
Personal Data

Year 11 Werribee Secondary College 1986

Full Time Employment Last Five Years

United Group Resources, Moranbah Project Aurora, Queensland.
Crane Operator, June, 2007 – January, 2008.
I was living in the camp accommodation in a FIFO environment. I have been operating a Kobelco 80t Crawler crane, backing up on the 250t Kobelco and other site cranes as required undertaking all manner of construction tasks.

United Group Limited, Ravensthorpe Nickel Project, Western Australia.
Crane Operator/ Rigger, December, 2006 – April, 2007.
I was living in the camp accommodation and working Night shift in a FIFO environment. I had been doing advanced rigging tasks and operating a 55t Tadano mobile slewing crane and Franna's as required.

Westform Rigging and Scaffolding, Olympic Dam Mine, South Australia.
Rigger/ Crane Operator, September, 2006 – November, 2006.
I was living in the camp accommodation and working 12 hours on 12 off in a FIFO environment. I have been doing advanced rigging tasks in the copper smelter and acid plant during the last shutdown and also on the shutdown of Anode Furnace 3 and 4.

Thiess Sedgman Joint Venture, Dawson Mine, Moura.
Crane Operator, November, 2005 – August 2006.
I was living in the camp accommodation and operating a 25t Mac 25 Franna and had been driving as required various slewing cranes under 60t. I was part of the team building a Coal Handling and Preparation Plant. I was also a member of the Emergency Response Team for this site and drove a company bus to and from site everyday.

Williams Cranes and Rigging. General Crane hire, Brisbane.
Crane Operator, July, 2005 - November, 2005.
I was driving cranes for general hire in and around Brisbane. I was responsible for the operation of Franna's 12t up to 25t and Slewing Mobile Cranes up to 55t.

Allfix Australia, Hi-rise façade installation, Melbourne, Victoria.
Crane Operator/ Rigger May, 2002 - May, 2005.
I was involved with all aspects of the installation of the high-rise facades on several projects in the city of Melbourne. The last project I was working on was the Eureka Tower site at South Bank in Melbourne. When I left we were installing facade at a height of 250 meters.

Skills

* Hold O.H.S. Australia Certification in Dogging, Advanced Rigging, Intermediate Scaffolding, Open Mobile Crane, Forklift Trucks, Elevated Work Platforms, Cherry picker truck and Building Industry Health & Safety Induction Course.

* Experienced with mobile all terrain, truck mounted, rough terrain and crawler cranes, Franna cranes, Boom Forklifts, Straddle Carriers.

* Experienced in using & operating heavy machinery e.g.: Trucks, Forklifts, Cranes etc.

* Experienced in working in confined spaces.

* Experienced in working at heights, EWP's & in workboxes.

* Experienced in first aid.

* Experienced in firefighting & light rescue.

* Experienced in machinery removal and installation.

* ASIO cleared for Defence Establishments.

* Proficient in the use and maintenance of breathing apparatus.

* Computer literate – Windows
Word
Excel
Internet

* Able to communicate effectively at all levels, written and verbal, also demonstrated experience at public and group speaking.

* Believe that Cumtomer Service is of paramount importance and act accordingly, giving very high quality of service to clients and employers.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 2540)

Go to Search Parameters...

Brief Description

Computerized inventory and stock manage control to acceptable levels and inventory accuracy & conciliation. Fuel consumption tracking. Etc.

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Management, business, trading, oil and gas, adminstration, HR, petrolium

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Experience: Planning RC & DD drilling - Logging / Surveying & GIS / Sampling / Data modeling. Positions: Offshore geologist / field geologist / Project kimberlite geologist (Namibia & Angola).

I'm a well service / well intervention Supervisor

Open Crane Operator and Advanced Rigger

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

Mechanical Equipment Specialist with 20 years of Heavy Industrial Experience

analyst

BSc Computer Science (Mains :- Computer Science, Physics & Mathematics ),One Month Course in Fire & Safety Engineering from Bharath Petroleum Kochi Refinery,BCFE [Basic Course in Fire Engineering], Done 24 days training in Industrial Fire Fighting from Kerala Fire & Rescue Service (Kerala Fire

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Worked in chemical Industry for 14 years.

P&PCM, MBA, B.Arch

I am qualified as an operator for monitoring pressure, flow, temperature, gas, and liquid pipeline operations including pipeline, wells, refineries, and plants.

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

Operations Supervisor

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

10 Years Working As A Cartographer For QARUN Petroleum Company

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Electration Engineer Trainee

Contract Administrator, Paralegal-PC/Microsoft Proficient

4yrs Oilfield & 6yrs Management Experience

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

Professional career spans 12+ years in field of Construction,contract and project management, strategy formulation (for high spend areas), strategic sourcing and supply chain process reengineering.

Electrical Engineer

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

MBA, experience in Clients relations and mutual fund industry.

For the last five years I have been employed as a Research Technologist in a hydrocarbon laboratory. My background encompasses oil and gas analysis, FDA & cGMP quality control, as well as other types of analysis.

Bachelor degree in Economics(First Class Honours), Associate of the Institute of Certified Cost Management of Nigeria, Associate of the Institute of Certified Economists of Nigeria, National Diploma in Statistics(Distinction)

Millwright/Welder Maintenance

Desired employment / Occupational field Financial & Economic / Project Analyst

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

20 + Years Experienced Heavy Equipment Operator / Haul-Truck Driver Supervisor to Relocate Anywhere. I desire to work for a well established yet growing company.

I am a young energetic Mechanical Engineer with hands-on experience in Upstream Oil and Gas industries and Masters degree in Project Management from National University of Singapore. I came to Singapore to gain the best of knowledge of the industry and the field exposure so as to increase my profess

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Skilled assistant driller can assist using safe relavent techniques to drill and avoid dangerous methods.

Electrical Engineering, Distribution Planning and Engineering, Future Planning for Electrical Load Growth, Study of 11 / 6.6 kV Network for New Projects, Modification of existing 11 / 6.6 kV network to increase reliability

Bachelor’s Degree in Mining Engineering, Faculty: Petroleum Geology and Geophysics, and Chicago Oakton Community College Faculty: Computer Science.

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

Experience in Project management w.r.t Electrical, Electronics, IT and Telecommunications, Mechanical equipments, Oil & Gas, and Civil construction equipments, Automotive Industries, Civil Constructions, Project Management, IT / BPO Services, Food and chemical Industries and service sectors

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out