Resume - Process/Production technician qualified to degree level. Operation experience wi...

Misco Jobs

Resume #68104

CONTACT INFORMATION:
View contact information...

CAREER HISTORY

Sep '07 to present date Production Technician, Petrofac, Point of Ayr Gas Terminal

Responsible for the safe and efficient operation of plant equipment utilised in the removal of hydrogen sulphide and condensates from gas received from the Liverpool Bay gas rigs, before export to Connah's Quay power station.

Equipment used includes gas/liquid, liquid/liquid and low temperature separators, amine absorption and regeneration columns, sulphur recovery unit, gas fired furnaces and heaters, catalytic reaction beds, refridgeration equipment, pressure relief to flare, pig receiver system and chemical injection systems.

Isolate and de-isolate plant equipment in support of maintenance activities. Linewalk and leak test plant equipment after maintenance activities before returning to service.

Perform in-process analysis and adjust process parameters to ensure optimum plant performance.

Nov '06 to Aug '07 Shift Manufacturing Tech. Invista (based ICI, Wilton)

Responsible for the safe operation of continuous process plant equipment producing nylon intermediates using highly flammable hydrocarbons on a COMAH registered plant.

The process uses increased pressure and temperature oxidation reactions, flash cooling, catalysed hydrogenation reactions, phase separations, distillation columns and material transfers.

Trained in the operation of emergency shutdown and fire fighting systems.

Mar '01 to Oct '06 Operating Technician, Nova Chemicals (based Shell Carrington site).

Responsible for the safe operation of four continuous multi-stage polystyrene production lines, manufacturing both crystal and high impact solid polystyrene on a COMAH registered site. At any one time controlling two lines via a DCS platform.

Each production line required the use of reduced and high pressure reactors, electrically and hydraulically driven pumps and motors, air actuated control valves, temperature sensitive catalysts, chilled and cooling water systems, steam boilers, oil heating systems, air compressors and product transfer system.

The DCS utilised pressure, temperature, flow and level control loops.

Controlled the rate of production and product specification according to production requirements following standard operating procedures.

Acted as permit co-ordinator on a rotational basis.

Monitored effluent and process vent emissions following environmental operating guidelines. Monitored receipt and storage of petrochemical starting material.

Involved in plant start up and shutdown operations. Utilise cause and effect information sheets.

Trained new staff in all aspects of the operating technician role. Performed analysis of product quality and carried out first line maintenance.

Liaised with management, technical, instrument, laboratory and maintenance personnel in order to identify and solve plant upsets with minimal disruption to production.

Involved in the Responsible Care program to improve plant safety and efficiency, including participating in hazard/risk assessments.

Isolated plant equipment using company equipment isolation procedures and issue permits to work.

Mar '99 to Mar '01 Shift Supervisor, SynPro Tec Ltd, Manchester

Responsible for the day to day operation of a pilot/small scale batch manufacturing plant producing synthetic organic chemicals used as intermediates in pharmaceutical, agrochemical, cosmetic products, often using new or infrequently used processes.

Trained in emergency response in accordance with COMAH regulations, including nomination as an out of hours, offsite emergency contact.

Involved in the continuous improvement of chemical processes and plant equipment. Implemented new working procedures and documentation systems.

Dec '97 to Mar '99 Production Technologist, Contract Chemicals Ltd, Merseyside

Undertook trials and audited production batch sheets to verify optimum production plant process parameters and assisted in implementing process improvements into standard manufacturing procedures.

Involved in the commissioning of new plant equipment including use of SCADA system.

Supervised plant operators during plant based trials.

May '97 to Dec '97 Shift Analyst, Analytical Department, Zeneca plc, Huddersfield

Analysed process and final product samples from pharmaceuticals, agrochemical and fine chemical plants using HPLC, GC, TLC, and titroprocessors, working to GLP/GMP regulations. Advised operations staff of necessary adjustment required.

1991 to May 1997 Lab Technician, BNFL, (based at Sellafield)

Performed analysis of water used in cooling and boiler systems, following BS5750 procedures, using wet chemistry techniques, UV/visible spectroscopy, AAS and HPLC. Analysed reactor coolant gases for impurities and levels of radioactive isotopes using gas chromatography and graviametric methods.

Undertook practical work, at laboratory and pilot plant scale, to improve plant processes.

QUALIFICATIONS

1996 B.Sc.(HONS) Chemistry, Second Class - University of Central Lancashire, Preston.

TRAINING

2001 to 2006 Participated in responsible care driven training covering topics including manual handling, IPPC environmental guidelines, COMAH emergency response procedures.

2006 Counterbalance forklift truck licence refresher.

2001 Site based fire-fighting awareness.

PERSONAL DETAILS

Date of birth: 7th December 1972 Full driving licence and own car.

Interests include football, swimming, cycling and reading novels and autobiographies.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 2461)

Go to Search Parameters...

Brief Description

Well servicing (Coiltubing, Wireline and Pumping Operations).

Growth with Profit (Marketing, Operations, Sales & Business Development)

Complete knowledge of administrative and managerial best practices for Planning, Sales, Design, Manufacturing, Delivery, Commissioning, Start-up and Warranty of heavy industry goods and services. Two Bachelor engineering degrees and Harvard Business School.

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

Process/Production technician qualified to degree level. Operation experience within petrochemical/chemical/oil&gas industries including DCS panel operations.

Chemical Engineer with MSc. degree in Polymer Science & Technology

B.Sc. (chemistry) 13+ years experiencei in oil/gas &petrochemicals plantoperation. Experience to work with contract resourses(USA), UOP(USA), planttech(india)COSDEN(USA) people in enert entry in vessels for catalyst replacement jobs. DCS /PLC experience, fire trainning, first aid trainning attended

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

I have 5 years Pre-commissioning, Commissioning and Operations experience in

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Exploration, Development, Workover, Deviated Well Drilling Supervisor

Electrical and Electronic background. Experience with ESPs, Completions and Production Engineering

Well Service Supervisor or Coil Tubing Supervisor

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

Presently i am incharge of Utlities area consists of Steam Boilers & Turbines. Specialist in all type of watyer treatments plants.

Water treatment plant operator - laboratory technician in a power plant

drilling Bs, exploraion and production Ms, production optimisation and developement management

MBA/Chemical Engineer with 10 years experience in Oil & Gas plant operation. Expert eperience in commissioning /operation in refinery/petrochemical/Cryogenic LPG terminal/hand on experiance in DCS/quality control/Marketing

Chemical Engineer with 7+ years of experience and possessing commendable skills in operation & control of complex high pressure petrochemical reactions in high capacity LLDPE plant

Worked For Cheveron and other various maritime companys thru Unions as A QMED. Worked as a Pumpman on super tankers as well working for Military Sealift Command. Pumping ballast on all the ships i worked on...

BOILER COMPETENCY C CLASS PASSED. HAVIG GAS TURBINE (26.3 MW) OPERATING EXPERIENCE

I would like to work in Petroleum Exploration Field as a Mud logger

I have UK's HSMP work permit. Master of Science degree in Geology, 1999, University of Karachi. Bachelor of Science degree in Geology, 1998, University of Karachi. Certification in Computer Science, Oracle, Dbase and Basic, 1996, Petromen Training Institute.4 years experience in Oil & Gas industry.

I have qualifications in Mining and Environmental Geology. I have no work experience and require companies that take a stance in developing their employees. I am ready and willing to start from the begining and find my way to the top.

BOILER OPERATION

Seeking a challenging position in the engineering field operation with an organization that provides opportunity to utilize and improve my operational, technical, management, and team work skills while enhancing professional growth.

Engineer, Junior Drilling supervisor, Wokkover supervisor, Engineering Technician.

want to Join a progressive company which can utilize me properly.

I have Master's Degree in Petroleum Geology from Karach University in Dec2000.After being passed out i got internship in Pakistan oilfields ltd one of the largest operating company in Pakistan. since then i am working with BHI as senior mudlogger.

Objective; to receive long term employment in the oil and gas industry, preferably in the downstream refining sector. I bring 13 years multi-faceted oil and gas experience to offer both up and downstream operations. My strongest forte is in refining operations.

13 years in Petrochemical Operations at Hovensa LLC Oil Refinery. (Former Hess Oil Refinery U.S Virgin Island). 230 MW Power Plant, 58 bpd Delayed Coker unit with Gas Plant, 40 bpd Crude Unit.

A Chemical Engineering degree holder, having more than 7 years of experience in off-shore oil field operations including production, maintenance and instrumentation.

management experience of a wide variety of environmental projects including international HSEMS, development and implementation of environmental management systems, development and provision of audits and training courses..

worked as an operation engg, has a very good operational knowledge, result oriented, belives in doing work with available resources.

I'm operator oil&gas production, i have very good experience (09years above), so i have the ability to work under presure and i have the spirit of the teams , these are my differents daily tasks:operator storage& lact meyring system, separation&stablizers; re-run system, process gas, deshydratation,

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

1) Leaderhip. 2) Organised. 3) Decission making

I am holder of a Bsc. in Marine Mech. Eng; Major: Offshore Engineering. My back ground in oil field construction activities (Onshore /Offshore), and and extensive experience in wellhead engineering, maintenance, repairs and testing.

Well cementing specialist with an experience of three years in the field of well cementing. Great knowlege in location safety and

Please Contact ASAP

Over 13 years experience as an Advanced Care paramedic. Extensive remote area paramedic coverage-Pipeline construction and oilfield exploration rig. Helicopter rescue/retrieval.

AIR SEPARATION PLANT Operator

Functioning in a project/program management consulting role for MAXAM and CYANCO Companies on highly sensitive processes. In these assignments, I assembled high-performing teams that delivered a complex project plan ahead of schedule, despite a demanding timeline and aggressive business objectives

A senior-level environmental, safety, security and health professional who has worked in the manufacturing as well as EHS functions for private firms as well as large corporations and consistently contributes to corporate goals. A proven trouble-shooter, problem solver and innovator with a strong t

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out