Resume - 27 Years Crude Oil Refinery and Manufacturing experience

Misco Jobs

Resume #68393

CONTACT INFORMATION:
View contact information...

Accomplishments
In my present position as Compliance Engineer, I created coloured pre-printed Permit to Work templates with hazard identifications and control methods for issuing various jobs. This meant that a permit could be completed within 10 minutes instead of taking up to an hour as these templates already identified hazards and control methods for the jobs and all the PTW receiver has to do is to read the contents of the templates and sign.

As Shut down coordinator during major annual scheduled shut downs at the refineries I worked was the most exciting time I experienced. To be in charge of a Crude Oil Plant with so many operators, contractors and various other personnel involved was a situation that brought the best out of me. I wrote all the shut down procedures for control room operators to shut down the plants safely. Every shut down took us 6 weeks to complete including catalyst reloading or catalyst regeneration on the reactors.

I also successfully extended the life time of the our catalyst (needless to mention very expensive) in our reactors system during normal operation by using a small feed bypass line (a line never used for a number of years despite installed during construction) entering the reactor system between the 2nd and 3rd reactor resulting in the 3rd and 4th reactors working a bit harder than the 1st and 2nd distributing the process evenly over the 4 reactors in series without compromising the product specifications, an achievement I'm very proud of.

FONTERRA BRANDS TIP TOP LTD – AUCKLAND
Compliance Engineer – Fonterra Brands Tip Top Ice Ltd
Auckland and Christchurch

Presently has sole responsibility to coordinate the Fonterra Permit to Work System project at and HSNO, Hazardous Substances and New Organisms – chemical management at main manufacturing plant in Auckland and the Christchurch branch, to ensure hazard identification, job task analyses and controls are put in place prior to any work being carried out on site to ensure personnel, equipment, environment and public safety.

ASSET MANAGER - THERMAL HEAT PLANT
As Asset Manager to ensure that the Heat Plant owned by Meridian Energy exceeds the contractual obligations to their client Winstone Pulp International. Also responsible for overseeing the operational and maintenance activities associated with the energy facility as well as shut down planning and coordination. To Continuous seek improvement initiatives and management of safety of the plant. Responsible for leadership and management of staff on the plant. Contorl room Operations using Scada Computerized system.

SENIOR PROCESS ENGINEER / CRUDE OIL PLANT SUPERVISOR
Responsible for leadership and management of staff on the plant, improving costs, quality and waste reduction, problem solving as appropriate. Maintain high standards of safety within operations and support areas. Shut down coordinator during major annual shut downs. Identification and implementation of continuous improvement initiatives and management of safety, quality and regulatory compliance on the plant. Experienced in plant commissioning/decommissioning,control room operations - TDC 3000 computerised system and maintenance activities.

PROCESS PLANT OPERATOR
Responsible for controlling the process of the Visbreaker and Desulphurization units / plants which encompasses safety, hygiene and equipment maintenance

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 2461)

Go to Search Parameters...

Brief Description

I have twenty five years with Mobil/Duke energy in field and plant. I have three years with Northern Natural Gas as an operator

Over 25 years experience supervising the drillin of deep high pressure wells, both vertical & horizontial

Reliable and safety conscious, 41 Yrs old with 21 years plant operating experience in Oil and Gas Production, Gas Plant And petro-chemical industries within international environment

I am an aspiring and dynamic Process Plant Operations Personnel with supervisory skills and overall experience of about eighteen years in petrochemical industries, possessing a Diploma in Chemical Technology. Background includes supervision/ operation of continuous and batch process plants.

Engineering Graduate( B.Tech. Chemical Engg. – 4 years degree course) with 16 ½ Years Experience in Work Over Operations / Supervisor / Completion

DCS operator/panel operator/plant foreman / supervisor

Experienced Process Operator who has worked on a multitude of Process Plants and with many different types of equipment. Have various qualifications in Industry, highest being HNC in Chemical Engineering. I have experience in DCS control room operations, outside operations.

I have three years shift incharge experience and five years operating experience of PLC / DCS CENTUM CS 3000 Panel, having best control in normal operation, trouble shooting, startup / shut down and Turnaround activities.

I here by submit my application for the Toolpusher position in your esteemed organization. I posses about 19+yrs. rigorous, qualitative experience having been associated with leading oil exploring companies. I have experience in directional drilling & under balanced.

Locate of lines, pigging, maintance, gas flow,

Currently I am employed as a Senior Process Technician in the Luboil Unit at SAPREF (Shell & BP SA Petroleum Refineries) a 180 000 bbls/d refinery situated in Durban on the east coast of South Africa. I have just over eleven years oil refinery experience mainly in the Production/Operations Departmen

Powerplant operations including400/1500psi boiler/steam turbines/gtg/water treating

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

Day Engineer of Ammonia Plant, Shift Coordinator ( FFC-2, Fauji Fertilizer Company Ltd. Sadiq abad Rahimyar Khan ) 2003 to Date ),Shift Engineer Urea plant (2001 to 2002) Ammonia & Utility Plants, DCS operation ( FFC-2 ) (1996 to 2001) ,Pre-Commissioning & Commissioning Engineer Polymer plant, IF

Most of my experience is in the gas field production. I have worked on a variety of gas compositions including 55 Mcm/d with 34000 ppm H2S and W/H pressure 4200 psi; familiar with well completion, actual maintenance and repair of W/H valves and actuators.

OHSAS 18001, ISO 9000, ISO 14001, Operation troubles shootings DCS Control room operations. Plant start up & shut down activities.

I am an accomplished Asset Integrity Manager with the Oil & Gas industry, with extensive experience in the areas of asset integrity, operations, maintenance and offshore support.

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

I am currently unemployed. I was Well Services Supervisor with Total NIGERIA, previously I was working with Total ABK Main office c/o Almansoori, providing well supervision and coordination in Slickline, Well integrity management and Well servicing. I also have 25 years experience as a Slickline Sup

Motivated drilling/completion engineer, with considerable hands-on experience and excellent credentials, seeks opportunity to perform at peak potential for an aggressive company. Has achieved a solid reputation for managing challenging technical operations efficiently and economically.

Master Mariner with experience of LPG/C and LNG/C

Bachelor of Science(chemical) /Diploma in Industrial Safety/Diploma in Process control and Instrumentation

Operation manager/Coordinator Fluids

SUMMARY OF EXPERIENCE: Diversified experience over 20 years in various fields. The first few years of this period included tertiary studies where I successfully completed 2 diploma courses; Management Development Programme, Principles of Production and Inventory Management,

Wellsite Supervision , specializing in Completion and Workovers, I am 49 years of age , in good physical and mental health. I have 28 plus years experience in the Oil and gas services industry with 22 of that being internationally, mainly in the former Soviet Union republics and North Africa

Drilling Supervisor

Consulting from start to completion of oil well, to ToolPushing and Driller, to Supervisor and Foreman.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

I am writing to your goodselves wishing a reply to my present request. I would like to apply for the post of Production Operator or any other Board man . I enclose my resume with the name of referees.

Power plant project, O&M professional

12 plus years experience in the operation of various Hydrocarbon processing units located offshore (production platforms, and FPSO) and EPC company. My current position is that of Snr. Production Operations Lead with Sunlink Petroleum

Wellsite /Operations Geologist with Internation experince more than 18 years with sound operation knowledge on Deep water HPHT , Predrill & Realtime Pore pressure studies with exposure ot OBM & Air Drilling

I have had near 20 years of experience in the marine industry, currently a technical superintendent in a company with accomodation workbarges servicing the oil industry. All these barges are fitted with 8 point anchoring units, have worked on engine driven types such as Skagit & Amcon and electric

I am a Mechanical Engineer from Madras University in the year 1981. I have over 18 years of Offshore oil fields experience in production Operations of oil & gas and water injection.

Monitors meters, gauges and other instruments attached to equipment and makes adjustments whenever necessary

Experienced Permit to Work Co-ordinator with HSE and Operations experience

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

More than 20 years land mark f/R/b to tool pusher

27 Years Crude Oil Refinery and Manufacturing experience

At Present im a lead contol room operator of a 400 mmcf gas processing plant in wyoming

Gas Plant Operator, Process Operator , Control Room Operator

B.Sc. first class with 12 years of experience in petrochemicals/oil and gas field

Machinist for CNC & general. I want to apply for CNC Machinist

dcs panel operation for terminal and plant

Having 13+years of experience in refinery,fertilizer & petrochemical field which includes 5years in india and 8+yearsin kuwait.

-I worked offshore in Nigeria and Brazilia on CCR Operator position

Over Fourteen and half years of experience in Petroleum Refining & downstream process, Petrochemicals and Chemicals in the Field of Continuous Process plant Operations, Troubleshooting and Commissioning. Well versed in Normal Operation and Unit revamps, Gross root & Expansion of Crude Refinery Erect

I an am executive with 24 yrs of experience with success in start up, strategic planning, product management, sales and marketing, cost control, technology transfer of engineering/equipment /turnkey system being part of global cross functional team for strategy building and success in the region.

Twenty five years in managing remote area field construction and logistical operations through out Asia. Construction of air strips, heli-pads, camp facilities, drilling location. Subsea Fiber Optic cable landing operations and post lay burial operations on and off shore.

Dear sir, I would like to submit my application form for a suitable post of production engineer. Here is my CV below. If you want other document or information, please let me know.

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out