Resume - FELONY conviction disclosure! Experienced metrologist, industrial electronics re...

Misco Jobs

Resume #69577

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
Significant specialized military training and extensive real world experience have resulted in excellent qualifications for calibration, test equipment, industrial electronics and computer network maintenance and repair related positions within the private sector.

Have possessed a Secret Security Clearance, and have received military commendations for outstanding performance of duties. Dedicated, hard-working professional with demonstrated technical abilities, attention to detail and solid communication skills enhancing interpersonal relationships with supervisors, peers, and subordinates alike. Anxious to become affiliated with a progressive firm capable of utilizing previous background to mutual advantage.

PROFESSIONAL EXPERIENCE

RESIDENTIAL CONSTRUCTION WITH VARIOUS CONTRACTORS 11/03 - PRESENT
Wilmington, N.C. area
Currently working for past year with local subcontractor on all phases of remodeling and addition. Started out installing seamless gutter, did some production framing, spent some time in siding and exterior trim, installed some custom stairs, and a little bit of roofing.

INDUSTRIAL ELECTRONIC SERVICE/REPAIR/CALIBRATION/ETC. 1/94 – 10/03
The Triad, N.C. area
During this period I performed just about every known maintenance action on just about every known piece of industrial electronics and test equipment for four different repair houses in the greater Triad area. A list of equipment and manufacturers I've supported would be simply exhaustive. While the majority of the work was in-house bench repair I also performed on-site factory field service calls.

RESIDENTIAL CONSTRUCTION WITH VARIOUS CONTRACTORS 1/93-12/93
Wilmington, N.C. area
General residential construction, framing, roofing.

PRECISION MEASURING EQUIPMENT LABORATORY TECHNICIAN 1/91-6/92
Incirlik, Turkey for Vinnell, Brown & Root
Performed as metrology technical representative for Vinnel, Brown, & Root in Air Force PMEL in support of Rapier missile system contract overseas. Overhauled, modified, repaired, calibrated, and certified test, measurement, and diagnostic equipment(TMDE), including laboratory standards and automatic test equipment. Assisted technicians and users in troubleshooting, testing, and maintaining TMDE. Used TMDE to perform voltage, current, power, impedance, frequency, temperature, and physical/dimensional measurements.

NETWORK INSTALLER/SYSTEMS ANALYST 5/88-12/90
Oklahoma City, OK based for Network Solutions Inc.
Performed LAN integration involving the installation and debugging of network cards with TCP/IP based software into IBM compatible PC's. Installed and troubleshot IEEE 802.3 broadband and baseband LAN hardware including cabling, splicing, amplifiers, equalizers, modems, bridges, and translators at various AFRES locations.

CALIBRATION/SERVICE TECHNICIAN 7/87-12/87
Huntington Beach, CA for ElectroMetrology Corp.
Performed calibration/repair on electronic, electrical, and physical test equipment from various manufacturers. Included on-site work.

JET ENGINE TEST CELL SERVICE TECHNICIAN 10/86-6/87
Santa Ana, CA for Dynalectron Corp.
Troubleshot, overhauled, repaired, and maintained electronic, electrical, hydraulic, and mechanical equipment in support of A4, F4, F18, and C130 aircraft engine, hydraulic, and instrument test stands throughout the 3rd MAW.

PRECISION MEASURING EQUIPMENT SPECIALIST 1983-1986
Iwakuni, Japan and El Toro, CA for United States Marine Corps
Primarily involved in the calibration/repair of precision measuring equipment. Prepared routine reports on the results. Other responsibilities included determining the nature of calibration/repair to be performed in accordance with user demands, current procedures and design specifications, as well as ordering replacement parts, accessories or change kits, through applicable publications and supply documents.
Held collateral duties of Technical Publications Librarian in charge of maintenance of over 900 technical publications using database software to maintain inventory and Test Equipment NCO, responsible for lab standard maintenance and timely calibration. Served as Night Crew Supervisor as required.
Awarded Naval Sea Service and Good Conduct medals, Meritorious Promotion to Lance Corporal for PMEL school honor graduate, Meritorious Mast for outstanding performance as TPL NCO, and Honorable Discharge.

EDUCATIONAL BACKGROUND

Maud High School; Maud, OK Diploma 1982
Basic Electronics and Electricity; NAS Memphis, Millington, TN 1983 (honor grad)
Precision Measuring Equipment Laboratories; Lowry AFB, Denver, CO 1983 (honor grad)

HOBBY

I am an avid Linux enthusiast. A programmer gave me a Redhat 5.? disk 7-8 years ago and I have been poking at OSS since and dumped Microsoft several years ago. I can install, operate, and network most distributions available. I would welcome an opportunity to acquire some programming skills as it is the one area I feel limited in.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 2461)

Go to Search Parameters...

Brief Description

I am skilled in providing/developing HSE advice, HSE policies, accident/incident investigations, safety inspections, HSE training, Risk Assessments, emergency response/ evacuation procedures. I have obtained the National NEBOSH Certification in UK and the NISP - HSE certification in Nigeria

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Management, business, trading, oil and gas, adminstration, HR, petrolium

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

I'm a well service / well intervention Supervisor

Open Crane Operator and Advanced Rigger

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

analyst

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Worked in chemical Industry for 14 years.

P&PCM, MBA, B.Arch

I am qualified as an operator for monitoring pressure, flow, temperature, gas, and liquid pipeline operations including pipeline, wells, refineries, and plants.

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

Operations Supervisor

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

10 Years Working As A Cartographer For QARUN Petroleum Company

Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Electration Engineer Trainee

Contract Administrator, Paralegal-PC/Microsoft Proficient

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

A dynamic professional with over 10 year of experience in Project Planning, Cost Control, Estimation, Quantity Surveying, Co-ordination and execution of MEI&P Projects. Proficient in Primavera Project Planner V3.1 & 6.0, Office XP/2000 and In-house soft wares for Client / Sub-contractor Billing

Electrical Engineer

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

For the last five years I have been employed as a Research Technologist in a hydrocarbon laboratory. My background encompasses oil and gas analysis, FDA & cGMP quality control, as well as other types of analysis.

Bachelor degree in Economics(First Class Honours), Associate of the Institute of Certified Cost Management of Nigeria, Associate of the Institute of Certified Economists of Nigeria, National Diploma in Statistics(Distinction)

Desired employment / Occupational field Financial & Economic / Project Analyst

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

20 + Years Experienced Heavy Equipment Operator / Haul-Truck Driver Supervisor to Relocate Anywhere. I desire to work for a well established yet growing company.

I am a young energetic Mechanical Engineer with hands-on experience in Upstream Oil and Gas industries and Masters degree in Project Management from National University of Singapore. I came to Singapore to gain the best of knowledge of the industry and the field exposure so as to increase my profess

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Bachelor’s Degree in Mining Engineering, Faculty: Petroleum Geology and Geophysics, and Chicago Oakton Community College Faculty: Computer Science.

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

I am a holder of first class honours in Mining Engineering from UMat, Ghana,. Knowledgeable in the Microsoft Office Suite (Microsoft Word, Excel, PowerPoint, Access). I am also familiar with some General Mining Packages such as; SURPAC AutoCAD, and WHITTLE. I am a fast learner with the zeal to learn

Field sales representative collection/ credit investigation drafting edge

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out