Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #70361 next resume »» CONTACT INFORMATION: View contact information... Qualification Summary I am experienced with instrumentation and control, both in plant and sales, design and commissioning. I have experience in many industries including boilers and power generation, food and dairy, water and waste water, paper and pulp, plus others. I am qualified as a field service representative, sales engineer, engineering technician, I&C technician, system integrator, technician, DCS technician, HVAC engineer or technician, and computer technician. Experience 2006 to present Fagen Inc. Commissioning Engineer Startup and commissioning of ethanol plants built by Fagen and engineered by ICM. Included all aspects of plant commissioning including loop checkout, configuration, equipment commissioning, training. 2004 to 2006 Cal Energy, a MidAmerican Energy Company. Calipatria Ca. I&C/DCS Technician Instrumentation and DCS support for 13 generating units in 6 geothermal power plants located in the Imperial Valley, Ca. Supporting Foxboro I/A DCS running on Sun Unix platforms, Rosemount Delta V DCS running on Microsoft NT4 operating systems, Woodward, Triconix, and Mitsubishi governor control systems and Bently Nevada temperature and vibration monitoring systems. Responsibilities included DCS repair, maintenance, data backups and programming, PLC trouble shooting and repair, maintenance and configuration of RTX plant data logging systems and well field SCADA systems. Using all the above systems along with Hathaway event data collection systems I was responsible for identifying causes of turbine trips and supplying supporting data and documentation. Installed, configured and maintained database and hardware for Druck documenting calibration system. 2001 to 2004 Champion Systems, Jamestown N.C. HVAC control system engineer All aspects of commercial HVAC control system engineering and design from bid preparation to submittal including hardware specification. Included control system logic programming and graphic screen configuration of Delta Control DDC building control software, and control system logic design for chillers, boilers, air handlers, cooling towers and pumping systems. Also supervised field network installation and performed system checkout and startup of BacNet based Delta Controls DDC systems with OrcaView software installed and configured on Windows XP operating systems. 1998 to 2001 Systemation, Fairport N.Y. Systems Integrator, engineering technician Formed applied services division of Systemation with another individual. Focus was system integration for municipal water and waste water treatment plants. Systems used Modicon PLC's, Opto22 I/O and Citec software running on Microsoft NT4 server/operating systems. Services included panel design and fabrication, installation, configuration, calibration, start up and commissioning of systems. Provided factory trained field service for the sales division on Foxboro instrumentation and calibration services for flow metering devices. 1985 to 1998 Total Control System Services, Inc., Varysburg N.Y. President, founder and primary business manager. Manufacturer's representative for several major lines of instrumentation. Provided repair, calibration, maintenance, installation and start up of instrumentation and control systems in New York and Pennsylvania with additional customers scattered from New England to North Carolina. Provided technicians for plant shutdowns and outages. Primary customers were water and waste water treatment plants, paper mills, food processing plants, hardwood lumber drying operations, and various other applications. My involvement included general business management, sales, system design, supervision installation, start up and calibration of instrumentation. Sale, design, installation and servicing of data telemetry and SCADA radio based systems. 1978 to 1985 The Foxboro Co., Buffalo N.Y. Field Service Representative, Sr. Field Service Representative, Systems Analyst Provided field services for entire Foxboro product line. Supervised installation and calibration of instruments. Specialized in power system and boiler control system start up and commissioning for utility and industrial applications. Hardware experience included Foxboro DCS systems, electronic and pneumatic process control instrumentation and systems, and analytical instrumentation. Experience includes Water and Waste Water, Paper and Pulp, Chemical, Food and Dairy, Refineries, Foundries, Steel works, and many other various applications. Licenses F.C.C. General Radio Operator license F.C.C. General Mobile Radio Service license (Old F.C.C. First Class Commercial license) F.C.C. Amateur Radio License Advanced Education A.A.S. Electrical Technology, Erie Community College, Williamsville, N.Y. Additional Classes Invensys Triconix System Maintenance Foxboro I/A System Maintenance CiTec software configuration Delta Controls OrcaView software configuration Eckhardt control valve sizing and specifying school View contact information... «« previous resume next resume »» Search Results (Resumes 1801 to 1850 of 2722) Go to Search Parameters... Brief Description CURRICULUM VITAE Petrophysicist Excellent communication skills, resourceful, effective manager of human & material resources I have 20 years experience in fire safety, prevention and investigation, hazmat safety and operational and fire fighting experience of which 10 years were in a supervisory position as an experienced fire officer onshore. I am currently working as a safety advisor and rig medic for two years. Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor / Senior Process Technician / Marine Terminal Supervisor, SIMOPs Coordinator / PTW Coordinator US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii) I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded 12 years of experience on Intergraph EDMS/CAD System, specially PDS & Smart Plant products administration; at present working as EDMS Engineer in Sabic, Saudi Arabia since April-2001. I am going to be released by end of 2007; please find my CV attached herewith. Captain looking for a challanging position shore based as Marine/HSE Superintendent- Manager. I am an unlimited Master Mariner and I have recently achieved a MSc in Marine Operations and Safety Management. In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need. Warehouse Management I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic. Process engineer / production supervisor in oil/gas/petrochemical company. Radio and Communications 30 years in worldwide Operations, Sales, Engineering (Cementing Specialist) & Management with leading international service companies - principally Dowell Schlumberger & BJ Services. Position held : Production Technician Have sound understanding in Geology. Graduate in Geology. Doing Post Graduation(final year) in Geology. Done field work. Computer-friendly. I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees. I believe my 4 years studying in Universiti Teknologi PETRONAS will be of great value should I join your company. Throughout the learning process, I was exposed to the task and responsibility in the field of technical and theoretical especially in mechanical field. 24 years in oilfiled \ Safety Rep.\ EMT Strategic thinker and forward, proficient at working with financial controls, experienced in QHSE, Operations audit, breath of Oilfield services and technical knowledge. Power engineer with post graduate diploma in thermal power plant engineering. Handling emergencies and restoring the plant stability in short time. Trouble shooting the problems in a short span. Logistics, Procurement and Materials Manager (Supply chain) Experienced Design Engineer A solid background in project controls, project coordination, project scheduling, and records management with over twelve years combined experience in these areas. Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics. A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget. Background includes the military, law enforcement, and international security management experience. Education includes a B.S. in Justice Studies, Master Safety Administrator (MSA) certification, and Emergency Medical Technician (EMT) certification. I have a diverse environmental experience derived from both industrial and international development sectors, from the corporate level to the field level -- over a wide range of environmental aspects and capacities. Currently eager to return to engineering roots. Contracts & Global Procurement Manager, Change Agent, Systems Initiation, Strategic Sourcing, Seasoned Negotiator, Proven Organizational & Team Leadership, Collaborative Mgmt. Style, Broad knowledge of OEMs & Suppliers, Contractor Oversight, Systems & Procedures, Middle East Mega-Project Experience. An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp I am a mining engineer and also has a masters degree in urban and regional planning. Buyer/Planner Skilled in Inventory Management, Cost Reduction, Sourcing and Negotiation I am a pet. eng. working as drlg rig supervisor for petrobel in egypt. To resume a career in the slickline / wireline area (or other associated areas) in the oil and gas industry. To be considered for further slickline / wireline training, so as to provide your company with the asset of a well trained, reliable and intelligent employee. He has more than 25 years of experience; from his current work in hydrogeological and hydrochemical assessment, environmental monitoring, and capacity building. He has managed many projects as well as acted as team leader on various project components. ESP, PCP, SRP Application Engineer NEBOSH Certificate availabe. About 9-10 years practical experience in construction, operation, maintenance as HSE Advisor and Coordinator. Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement Software Developer .NET, Java SQL Instrumentation I&C DCS Technician 6 Years in Power Generation, Steam Generation(HRSG) & Desalination (MSFE). An Experienced HSE Supervisor having worked with many Multi national companies and being recognised by those companies for the excellent job done. The Clients include Exxon Mobil, Single bouy Moorings (SBM), Qatar Gas II, British Petroleum (BP), Anadarko, Saudi Aramco, ARCO Dubai, DPC, RAKGAS, etc. 3 years in Oil & Gas industry. Oil refinery plant supervisor. Contracts Manager Commissioning BSc, 10 years field/management experience in pipeline integrity, pipeline inspection, direct assessment, risk models, project management, surveys, non destructive testing etc. Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors I have been working in the oilfield for about 8 years. I am currently looking for a Battery Operating job. I am willing to move anywhere. I am looking forward to hear from you. Thank You. Please read my resume attached. Project Controls / Project Services / Business Management Project Management / Production Control First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   [ 37 ]   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Change search parameters... CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com