Resume - I am working with Reliance Industries Ltd. [ Refinary Division ] since 2001. My ...

Misco Jobs

Resume #71278

CONTACT INFORMATION:
View contact information...

DATE OF BIRTH: 03/07/1975

MARRITAL STATUS: MARRIED

SEX: MALE

NATIONALITY: INDIAN

LANGUAGES KNOWN: ENGLISH, HINDI, GUJARATI,

EDUCATIONAL QUALIFICATION:

* BACHELOR OF SCIENCE [CHEMISTRY]
PASSED IN YEAR APRIL ¡V 1995.

PROFESSIONAL QUALIFICATION:

* 2nd CLASS BOILER ATTENDANT CERTIFICATE OF COMPETENCY FROM STATE AUTHORITY.

WORK EXPERIENCE:

SR. NO. EMPLOYER

PRAGATI CHEMICALS LTD
PRODUCTION CHEMIST
01/06/1995
22/05/1997
POLYMER RESIN

SARJAK CHEM LTD.

MARDIA CHEMICALS LIMITED

RELIANCE INDUSTRIES LIMITED
[REFINERY DIVISION-JAMNAGAR]
PRODUCTION SUPERVISOR

PROCESS SUPERVISER

PANEL EXECUTIVE
01/06/1997

17/08/1999

17/03/2001
13/08/1999

13/03/2001

TILL DATE
POLYMER RESIN

CAUSTIC CHLORINE

PETROLEUM REFINERY

PROJECT (COMMISSIONING) EXPERIENCE:

I was involved in successful precommissioning/commissioning & Startup of
Unsat LPG Merox Treating Unit (Cap.:-60000 BPSD) Technology by UOP,
Hydrogen Manufacturing Unit (Cap.:- 181TPD) Technology by M/S LINDE, Germany.
Followed by following steps.

* Review of PFD, P& ID, and equipment datasheet.
* Going through plant specific operating manual and standard operating procedure manual
* Loop punch list preparation & dilution of punch list.
* Precommissioning & commissioning activities like hydrotesting, flushing, leak test, drying, final box up, purging, acid pickling etc.
* Checking Fire and Gas Detection System and also fire water deluge system on various pumps and fin fans
* Plant start up activities like hydrocarbon inventory, oil flushing, cold circulation, long circulation etc.
* Furnace refractory dry out & start up.
* Inter lock loop checking
* Plant normalization, optimization & demo run (performance run)
* Plant normal shutdown & emergency shutdown.

PRESENT WORK PROFILE:

I am working as a PANAL OFFICER/EXECUTIVE in following units which has DCS of FOXBORO I/A Series 50 & PLC system.

1] UOP designed SAT/UNSAT LPG Treating Units with capacity of 60000 BPSD mainly used to remove H2S by treating LPG with Lean Amine 35 wt% & RSH by NAOH
2] UOP designed Naphtha Hydrotreater Unit, Cap.: 29000 BPSD
3] LINDE {GERMANY} designed HYDROGEN MANUFATURING PLANTS [Three Train] having capacity of 181 TPD.

MY JOB AND RESPONSIBILITIES IN STEADY PLANT ARE AS FOLLOWS

„« Continuous monitoring of throughput
„« Continuous visualize of plant on DCS panel.
„« Note down panel readings and cross check with field. (I.e. LG/TG/PG etc.)
„« Monitoring the smooth and safe operation of rotating equipment like pump, compressor, fin-fan cooler, and heater, etc.
„« Pump & Compressor change over / isolation for maintenance.
„« Lighting of burners using BMS & Controlling of furnace operation.
„« Controlling process parameter as per SOP & SOC from DCS.
„« Communication between interplant & inside plant for smooth operation of plant.
„« Maintain the record for the future/past shut down job.
„« Ensuring strict compliance with safety procedure, work permit procedure.
„« British Safety Council [BSC] checklists fill up periodically. & Safety Audit checking. Other job instructed by shift incharge.
„« Punch points list out & rectified as per P& ID, OTHER DRAWINGS.
„« Reporting to shift superintendent.

I have done start up, shutdown and handle emergencies several times
Successfully giving full regards to safe work practices.

VARIOUS EQIPMENTS HANDLED INCLUDE:

* Multistage Centrifugal LPG pump of 366KW rating [Make: Ingersoll Dresserrand]
* Diaphragm pumps of Capacities ranging from 0.4LPH to 1360LPH.
* Liquid full Absorbers, Extractors & Strippers.
* Single casing two stage Centrifugal Compressor for RFG [Make: Demag Delaval] of 3.5 MW having capacity of 22 TPH of RFG.
* Top Fired Balanced Draft Reformer [Make: M/S Selas Fluid Processing Corp. USA] with 288 tubes & 84 burners. Heat duty of reformer is 195 MMKcal/hr.
* Process Gas Boilers & Steam Generator [Make: M/S Sruthers, USA] both combine capacity to produce HP Steam to tune of 130 T/Hr @ 44.0 kg/cm2 pressure & 392 deg.cent. temperature.
* Pressure Swing Adsorption System. The flow rate through this system is 1,20,000 NM3/hr. of Reformate gas.
* Flue Gas Blower [ID Fan] Cap.: 260000 kg/hr, Combustion Air Blower [FD Fan] Cap.: 19400kg/hr, [Make: Howden]

TRANING PROGRAMME INCLUDES
* Undergone various training modules designed by Reliance, Jamnagar covering all the Process Details/ Operational Training.
* Undergone FIRED HEATER WORKSHOP, FIRE & SAFETY and FIRST AID training imparted by Health Safety and Fire Dept. in Reliance Industries Ltd. at Jamnagar.
* Involvement in certification of ISO9001, ISO14001, OHSAS18001
* Training programme on safe work permit system & On & Off site emergency plan.

PROFICIENCY OF COMPUTER:-
I have knowledge of Windows operated system like Microsoft Word, Excel, Power points, Lotus notes and LIMS (Laboratory Information and Management System) etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 2717)

Go to Search Parameters...

Brief Description

Well Planning, Log Interpretation, Geosteering of horizontal - deviatedated - vertical wells. Excellent userof IT Application Software.

Well Testing with Data Aqusition Supervisor with 10 years experience in Schlumberger and MB petroleum compaqny.

16 years in Oil & Gas Offshore/Onshore production cum Process operations

Professional Engineer, Degree (AMIE Mechanical), with (14 years of International and domestic experience) in operations of large thermal, gas and combined cycle power plant in India, Dubai and Sudan

Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.

DCS Operator for Fractination/Distillation of Fatty Acid,Distillation of Glycerin,Pretreatment of Oil,Splitting Column,Pretreatment of Glicerin Water,Boiler,Steam Turbine,Oil Thermal Heater,Hydrogen Production by Steam Reformer and Methanol Reformer

I am well trained to handle terminal operations, stores / materials management and Engineering / Maintenance activities related to Oil terminals / Petroleum retail outlets. I am 38 years old and have no problem in relocating to a suitable location / posting.

Drilling Foreman / Engineer (onshore) with 14 years on-site drilling supervision experience and 5 years engineering/planning experience (office).

I have robust bases in the quantitative and qualitative expertises of oil productions raw product and refined, the controls of expeditions by pipe, vessels or lorries. This experience(experiment) allows me to transpose my knowledge in sectors of industry as the mining extraction.

With 7 years of rich experience in Plant Operations, Production. Presently working with Niko resources Ltd., as a Lead Production Operator.Functional expertise in handling the production operations with key focus on bottom line profitability by ensuring optimal utilization of resources.

Production supervisor/production operator/ on job trainer

Experianced Offshore Rigger,Ab seaman,200t captain with USA work Visa

Possessed sound knowledge of reservoir simulation and high proficiency in use of reservoir engineering softwares such as Eclipse, Saphir,Peep,Mbal. Possessed an integrated knowledge of well test design and interpretations.

Stores Executive, SAP working invironment, Diploma in Mechanical Engineering, Graduate Diploma in Materials Management

Knowledgeable in Hazard Identification and Risk Assessment.

B.Eng in Chemical Engineering; Diploma in Mud (Drilling Fluids) Engineering.

Bilinhual: Spanish / English, Computer Literate, International Experience.

Well engineering, daily drilling operations supervision, services coordinator

SENIOR PLANT OPERATOR

Responsible for liaising with customer representatives on completion designs, hydrostatic calculations & tubing movement simulations (Cyberstring/WellCat), work planning, and procedures.

Responsible, highly motivated, active and knowledgeable employee who has a wealth of drilling experience for your company.

I HAVE 5 YEARS EXPERIENCE AS PRODUCTION OPERATOR AND I HAVE COMPUTER SKILLS(ICDL) AND GOOD SPEAKING AND WRITING ENGLISH LANGUAGE

I am a successful experienced large pulp and paper industry production supervisor with extensive knowledge working in a high paced, no errors environment. I believe my experience would transfer over well contributing to be proactive in company and personal growth.

20 years experience in Production/Operations onshore and offshore. Ex Marine Engineer officer.

Engineer with 14+ solid years of domestic onshore and offshore O&G experience; drilled or lengthened 30+ horizontal wells; expertise in cost control, field practices, safety training, RRC permits and reporting

plant operations/project management in power, petrochemical industry

I am working with Reliance Industries Ltd. [ Refinary Division ] since 2001. My responsibility is Panel operaton.

Coil Tubing/ Petroleum Engineer/Supervisor )

I have 15 years experience inpetrochemical plant.

Professional B.S. in Mechanical Engineering, with 18 years of experience at production fields in onshore and offshore areas and Power Generation Facilities. Turbomachynary and Rotating equipment, performance diagnosis, nondestructive inspection techniques, asset management and RCM

I am Process Operator with more than 8 years experience in Petroluem, Fertilizers, Petrochemical include Commissioning Experience with Multinational Engineering Companies.

Attorney specializing in Land and Oil/Gas Law

Faculty of Science, Cairo.B. Sc. Chemistry (Grade Good).

Operations Manager, Barge Master, Barge Captain, Master Mariner, Rigging and Scaffolding Supervisor, Crane Operator.

Ops., Eng. and Field Service Manager: experienced in technical, project and operations management; strong and extensive record in managing engineering & operation personnel teams; implementing from start to finish of corporate technology programs provided to diverse clients around the world.

See resume body

SUMMARY Over 25 years international experience in engineering and supervisory/management positions in the exploration and production of oil and gas for offshore and land drilling/coil-tubing/work over/completion operations.

25 years experience operator / contractor positions willing to relocate status: single

To gain a position that will utilise my knowledge and skills gained through extensive professional experience.

I’m a Power Control Systems Operations Specialist with 20 years operational / supervisory expertise and experience in High Voltage distribution / generation. I’m available for immediate placement, willing to relocate and I will make myself available at your convenience for an interview.

I have worked in different parts of the world in management positions and field operations.My strengths lie in my ability to communicate and work with people of different cultures and producing a team to reach the common goal of excellance by not reducing quality over quanity.

My duties as a Rig Mechanic have included the installation, repair, maintenance, and commissioning, of the rig and all equipment associated with, and involved in the drilling operation.

logistics supervisor, supply chain, rig manager, transportation dorector

Geological Asset Manager

Mining geologist

26 Years of Rotating Equipment, Mechanical Engineering Expertise gained in Oil and Gas Field Construction, Operation, Production, Reliability, Installation, Commissioning and Maintenance. Offshore, FPSO, and also Onshore Facilities experience. Rotating Equipment /Maintenance Engineer

Oil Industry Business Builder

LOGISTICS, SHIPPING, BILLING, SAFETY OFFICER

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

Excellent experience in the oilfield, having worked as Rig Manager for 3 1/2 years , working on Top Drive Telescopic Doubles, scissor sub and Super-single rigs.Good communicator, speak fullest Spanish excellent people skills and works well with others

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out