Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #71599 next resume »»
CONTACT INFORMATION:
View contact information...

Summary

Active DoD security clearance beginning 2006, current US passport, and U.S. Navy veteran. Accomplished Analytical Chemist in leadership role with 22 years of domestic and international experience at refineries, chemical agent destruction facilities, and environmental remediation sites. Priority and urgency driven with a successful record of scientific performance. Expert in gas chromatography and continuous emission monitoring with an emphasis on the analysis of chemical agents and explosives, refinery and natural gases, and raw and finished petroleum products. Manufacturer training on theThermo Fisher TSQ Quantum Access Triple Quadrupole LCMS. Strong mechanical aptitude with excellent trouble-shooting and information technology skills. Solid competency in verbal and written communications that include the creation of and contribution to the preparation of technical papers and Standard Operating Procedures.

Work Experience

Noblis (previously Mitretek Systems), Senior Staff 2005-Present
Falls Church, VA
Analytical chemist and technical lead providing operational support at an OCONUS site. Eliminated an unnecessarily complex process and introduced a standard one that dramatically improved efficiency and productivity, and modified a flawed technique to produce reliable data. Evaluated neat chemical agent management plans and interpreted construction regulations for the new US Army Medical Research Institute for Chemical Defense (USAMRICD) at Edgewood MD. Reviewed chemical agent processing and monitoring plans for ACWA Bluegrass and Pueblo Chemical Agent Pilot Plants (BGCAPP and PCAPP). Evaluated decontamination processes and recommended changes to improve performance and mitigate out of control conditions for the NSCMP Ton Container Decontamination Facility (TCDF) and Ton Container Cut and Clean Facility (TCCCF). Collaborated on an updated review of reactive coating technologies for self-decontamination of chemical and biological warfare agents.

Geomet Technologies, Senior Chemist 2002-2005
Gaithersburg, MD
Technical Lead and Project Manager for $700K analytical instrument support effort at Kobe Steel's chemical warfare remediation sites at Samukawa and Kanda, Japan. Saved Geomet $26K in equipment sales to client. Laboratory Manager and Lead Air Monitoring Chemist for the Mobile Analytical Support Platform (MASP) used to support the Rapid Response System (RRS) operations at Fort Richardson, Anchorage AK. Completed network upgrades to mass spectrometers and ancillary equipment, reviewed and modified analytical procedures, and organized MASP activities for routine analyses of air and waste samples using GC/MS, Minicams, other instrumentation, and wet chemical methods. Thermo Fisher TSQ Quantum Access Triple Quadrupole LCMS training.

Separation Systems, Petroleum Application Chemist 1997-2000
Gulf Breeze, Florida
Designed, modified, constructed, and tested complex, multi-dimensional Agilent 6890 gas chromatographs equipped with FID, TCD, and Sievers SCD and proprietary software for analysis and characterization of crude oils, natural gases/liquids, finished gasoline, chemical intermediates, feedstock, and refinery gases using prescribed ASTM and GPA methods. Analysis experience includes Refinery Gas Analysis of compressed gases and liquids to C20; Simulated Distillation per ASTM-D2887; simultaneous analysis of permanent gases and C1-C6 saturated and unsaturated hydrocarbons; Benzene and Toluene in Gasoline per ASTM D-3606; Alumina plot column analysis of C1-C8 Hydrocarbons; determination of C1 to C4 Alcohols and MTBE in Gasoline per ASTM D-4815; determination of RON and MON by PIANO analysis of finished gasoline; and chromatographic determination of heating value and %Sulfur. Installed analytical instruments and trained laboratory personnel at refineries and research centers in the US, South America, Mexico, Canada, and Korea. Completed analysis requests and testing in support of research and sales, attended technical conferences for sales support and presentations, and responded to customer application, repair, maintenance, and trouble-shooting inquiries.

USEPA Gulf Ecology Division, Analytical Laboratory Manager 1994-1997
Gulf Breeze, Florida
Working as a contractor to the USEPA with Avanti Corporation, reorganized a deteriorating laboratory to eliminate a 3-year backlog of analysis requests. Analyzed estuarine water, sediment, and tissue in support of USEPA toxicological research and monitoring of OC and OP pesticides, PCBs, semi volatiles by Method 8270, and metals by ICP, mercury by CVAA, plus automated GPC sample preparation. Connected, expanded, and standardized PCs running HP terminal emulation software, spreadsheet, and word processing software for data collection, reduction, and reporting. Wrote SOPs, implemented QA/QC, and began routine reporting schemes to EPA containing data summaries, method descriptions, references, and electronic data.

Midwest Research Institute, Staff Chemist 1990-1994
Kansas City, Missouri
Responsible for CEM and GC projects at hazardous waste facilities, refineries, chemical and industrial processors, and incinerators, including gathering and interpreting data; project management encompassing both technical and administrative/budgetary functions; preparation of reports and proposals for clients; and selection, design, and evaluation of associated resources. Implemented hardware and software changes to the Continuous Emission Monitoring system that integrated standardized data collection, reduction, and reporting. Identified, investigated, and evaluated new applications of analytical techniques (Fast GC, CEM, FTIR, and IMS) to characterize organic emissions from stationary sources.

CH2M Hill, Analytical Chemist 1988-1990
Montgomery, Alabama
Operated and maintained Finnegan 4000, 4500, and 5100 floor model mass spectrometers equipped with SuperIncos software used for USDWA and SW-846 analysis of VOCs, SVOCs, chlorinated pesticides and PCBs in water and soil. Also completed analysis of chlorinated phenols and PAHs by GC-FID, and THMs, EDB, and chlorinated pesticides by GC-ECD.

Chemical Waste Management 1985-1988
Emelle, Alabama
Operated and maintained gas chromatographs and other ancillary equipment for the characterization of hazardous material for disposal at the largest hazardous waste disposal site in the country.

Education

BS Chemistry, 1985 Florida State University

Graduate Student in Computer Science University of West Florida
CS graduate student from August 2000 to December 2001, 3.1 GPA. Completed courses in software engineering, C++ and Data Structures, Discrete Math, operating systems, microprocessors, and database management using SQL.

Cisco Certified Network Apprentice (CCNA) Pensacola Junior College
Completed four semesters in an accelerated program concurrent with graduate classes at UWF, GPA 4.0

C Programming Series Certificate, University of Alabama in Huntsville
* Fundamentals of C: Basics of program development using C syntax and structure. Data definitions, file IO, functions, and generic algorithm implementation.
* Fundamentals of C++: Understanding of object-oriented programming on the latest compilers and systems. Practical experience designing and using classes and objects effectively in classroom examples.
* Visual C++ for the Windows OS: Introduction to the Visual C++ development system and use of the Microsoft Foundation Classes (MFC).

Presentations and Papers

"Parameters for the Evaluation of the Fate, Transport, and Environmental Impacts of Chemical Warfare Agents in Marine Environments" (Submitted to ACS, "Chemical Reviews" for publication) Mitretek Systems, January 2007. Bizzigotti, Castelly, Hafez, Smith, and Whitmire

"Characterization of Selected Ton Containers Decontaminated at the Pine Bluff Ton Container Decontamination Facility, Chemical Analysis of TC Solids, Wipe Samples, and Air Samples" prepared for Edgewood Chemical and Biological Center, Aberdeen MD by Mitretek Systems, February 2006. Cutler, Faramarzi, McDonald, and Whitmire

"Cut and Characterize Sampling and Analysis Plan (CCSAP) for Ten Ton Containers delivered to APG-EA from PBTCDF" prepared for Edgewood Chemical and Biological Center, Aberdeen MD by Mitretek Systems, October 2005.

"Pine Bluff Ton Container Decontamination Facility, an Evaluation of the Decontamination Process." prepared for Edgewood Chemical and Biological Center, Aberdeen MD by Mitretek Systems, June 2005. Baker, Cutler, Faramarzi, Hafez, McDonald, Star, and Whitmire

"Accelerated Detailed Hydrocarbon Analysis using Hydrogen Carrier", presented at the Gulf Coast Conference, Galveston TX Sept 1999

"Extended D2887 Simulated Distillation: Column Selection and Practical Application", presented at the Gulf Coast Conference, Galveston TX Sept 1998

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1151 to 1200 of 2461)Go to Search Parameters...
Brief Description
Oil and gas exploration consultant with twenty years worldwide experience seeks project, contract, or position
I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future
A qualified Mechanical Engineer with 10 years of diversified experience in Pipeline and Plant Installation and commissioning as well as Polymer production and Structural Repair of components.
Planning, implementation and supervision of exploration activities in the field
Environ and social impact expert, sustainable development project planner, monitoring and evaluation, stakeholders mgt, computer literate, B.Ag econs, M.sc, Ph.D (Rural sociology)
BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.
Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.
I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.
Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.
I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.
I have more than 7 years experience in Offshore and onshore rigs in Pearsian Gulf and west and south of iran as drilling supervisor in Exploration, Workover and development wells and 1 year in AFD project as drilling Engineer, I familiar with high tech drilling tools such as power drive, auto trac
Retail supermarket management operations: employee relations, customer service, safety, inventory levels/ordering, profit/loss, legal requirements, building maintenance
Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.
Bachelor in Petrochemical Engineering from Dr. B. A. Technological University, Lonere, India with first class distinction in the year 2000.
Field Engineer - UBD
: 8 yers experience in pre-commissioning & commissioning and normal operation of refinery and petrochemical operation
Engineer with land and offshore oil and gas experience. Diverse knowledge of safety, drilling rigs, drilling equipment, casing, down hole expertise, completion, workovers, coil tubing, production, operations and cost control.
I'm a Lead Mechanical Technician with over 15 years experience with a major Oil and Gas Company and with considerable background in production engineering work. Served a mechanical engineering apprenticeship with a diploma in process engineering.
Cost Controller with strong accounting background. Over 2 years experience as cost controller and 14 years as accountant with multinational companies. Technical skills include preparation of project cost control plans, budgets and forecasts, cost tracking, cost and revenue analysis etc.
I am a qualified fourth class power engineer , who is quite mechanically inclined. I able to work well independently or in a team atmosphere. I am a hard worker who is happy to take on new challenges. I am good at troubleshooting problems , and am a very safety conscious worker.
Pipeline Commissioning, Maintenance & Decomissioning Engineer
Experienced Safety & Security management professional with 21 years of experience and benefitted from ISO, NEBOSH and military background. Management experience with large workforce.
I am a high-energy enthusiastic and dependable individual who excels in challenging and competitive environments.
qualification: bachelor degree in mechanical engineering, skills: Spares Planning, Man power planning Breakdown & Cost reduction by Productive maintenance/ Preventive maintenance. Working in team for achieving the targeted goals of organization. .
A highly motivated, professionally determined Petroleum Engineer with more than four years working experience with oil and gas exploration and production Company. Presently working with Petroleum Exploration (Private) Limited and independently handling production activities from all wells .
Mariner (Oil) with over 10 years of high quality shipping experience, now available and armed with Australian MBA, Six Sigma Green Belt, ISO 9001 Lead Auditor Certification, plus all other valid STCW'95; courses.
Installation, Operation and Maintenance Engineer (Mechanical)
International analytical chemist, expert in gas chromatography and continuous emission monitoring with an emphasis on the analysis of chemical agents and explosives, refinery and natural gases, and raw and finished petroleum products.
Field engineer in ge oil and gas
12 + Years HSE experience, 27 + years overall experience on International Oil & Gas projects, dedicated professional with a hands on approach to maintaining the highest possible levels of safety. Effective organizational and good training skills; Experienced in onshore & offshore Middle East; Asia
Experience in Oil & Gas Production and Petrochemical (Ethylene Plant)
Diploma of oil industry, hi diploma computer programing Many courses were taken in Training & development Department to improve work ability.
Worked in all phases of the industrial plants. In commisioning, start up and debotlenecking. As a process engineer, with experiencie in process, production, facilities and process control systems. Supervised group of 12 people, implement ISO 9000/1400, Osha 18000, economic evaluations and management
Chemical Engineer with 3 years Experience need a suitable job in Petrochemical/Chemical field
To become employed as a Process Operator
TO SECURE A POSITION IN WHICH MY EXPERIENCE AND SKILLS AS A REFINERY/CHEMICAL PLANT PROCESS TECHNICIAN WILL BE OF VALUE TO YOUR ORGANIZATION.
Ambitious, enthusiastic and career-conscious, I am keen to acquire new skills and form part of a successful team. I would like to travel and apply the skills learnt during my Geophysical Sciences degree. Seeking to embark on a long and successful career in geophysics.
To pursue an excelling career in an organization that provides challenging and responsible opportunities where my analytical and functional skills and abilities will be an asset.
Mainenance Operation Engineer.Experienced/ exposed to the activites like, QA/QC,SMS,ISM,ISO 14001 auditing,Environmental Regul's,ISPS and Insurance survey's.Trained and certified to Work in Dangerous cargo (Crude oil carrier) ships.Various kind of fire fighting system and techniqs are known.
I’m a Geoscientist with over 5 years of experience in the areas of: Seismic Exploration and Operations and Subsurface Geology in the field of Oil and Gas Exploration. I have master’s degree in Geophysics (Seismology) and Bachelor’s degree in Geology.
Drilling & work Over Supervisor, Master degree, 5 years experience in Offshore & Onshore operations
I’ve worked offshore in the South Pars gas reservoir in Iran as a Drilling and Production Engineer on board the Sagadril-2 /SPD-10 & Sagadril-1 /SPD-11
Senior Telecoms Technician, radio, satellite, rigger, cisco, networking, cabling, management, hf, vhf, uhf, microwave, tracking, it skills, wireless
5 years of experience as Drilling Engineer for Major Operator company in Denmark (North Sea Project) and as Drilling Supervisor for operator company in Turkmenistan.
PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER
I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.
Environmental, permitting, regulatory compliance work. Mining, power plants, and transmission permitting work. Academic background in range science and ecology. Reclamation experience. Operations, corporate, and international experience.
HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection
An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s
Seismic Data Processing (Up to PSTM, using Promaxtm &Vistatm),Quality control of Seismic Data Acquisition (using Promaxtm & Vistatm).
1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   [ 24 ]   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50  
Seach Parameters

Change search parameters...
CATEGORIES: Operations;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com