Resume - A qualified Mechanical Engineer with 10 years of diversified experience in Pipel...

Misco Jobs

Resume #71683

CONTACT INFORMATION:
View contact information...

Qualification:
* BE. Mechanical from NED University, Karachi, 1998

Professional Experience:

* Project Engineer at Pakistan Aeronautical Complex, Kamra for Overhaul/ Maintenance of Structural Parts of Airframe of F-7 Aircraft of PAF Since Feb 2004 4 yrs

* Project Planning Engineer at S. Zia-ul-Haq & Sons (Pipe line Installation)
- Installation of 8" dia x 14.5 km cross-country Gas Export Pipeline, at OPI Naimat Basal, Pakistan.
- Relocation and commissioning of 50 mmcfd gas processing plant at OPI Naimat Basal, Pakistan Feb 2002 to Feb 2004 2 yrs

* Manager Operations at SG Fiber Ltd (Polyester Yarn Manufacturer) Jan 1999 to Feb. 2002 3 yrs

Training at British Steels, UK
December 1997
General overview and hands-on experience of repair activities and technology of Flogates Limited and KSR International at British Steel plants and rolling mills. Following were the major plants visited in addition to the other small downstream factories in South Wales and England.
* British Steel -Scunthrope works
* British Steel -Llanwern, South Wales
* Avesta SMACC- Sheffield
* Flogates Ltd. - Chesterfield
* KSR International - Chesterfield

Training Included:
* BF-3 re-line at BS Llanwern, Newport, South Wales. Hands-on Training on Repair of Gate Valve Sets and allied equipment
* Casting Refractory lining and preparation of the surface for Carburizing in furnace
* Assembling and testing of Pneumatic/ Hydraulic Controls, Seals and pre-loads
* Detailed overview of Vacuum Degassing of 300-Ton Ladles at BS Scunthrope
* Repair of Refractory lining of an Arc furnace at BS Aldwork, Sheffield
* Repair and assembly of IPV bottom purging Valve at BS Aldwork, Sheffield

Technical Skills
Structural Repair of Airframe Components

* Process Planning and Layout Designing
* Project scheduling
* Human Resource Planning and Management
* Production Management
* NDT Analysis

Cross Country Pipeline Design/ Analysis and Installation:

* Preparation of Material Specifications according to API 5L and others
* Selection/ procurement and certification of equipment and machines
* Selection of route and preparation of Alignment Sheets, Plan Profile drawings with consultants
* Conducting Welding Procedure/ Welder Qualification Tests - API 1104/ ASME B31.3, Sec. VIII/ IX
* Conducting detailed surveys for ROW, Crossings and Bends
* Welding Inspection of Line pipes according to API 1104/ ASME B 31.4
* Installation/ Inspection of Joint Coatings according to NACE/ SSPC Standards
* Lowering of Pipelines
* Preparation of Field Bends
* Open cut/ Thrust Bored Crossings under Canals, Roads and Railways
* Inspection and Pigging of Pipelines
* Hydro testing of Plant Piping and Pipeline

Erection and Installation and Commissioning of Gas Processing Plant as per ASME B 31.8

* Preparation of P & I and Isometrics
* Preparation of layouts and foundation details
* Erection of vessels

Heating Ventilation and Air Conditioning/ Refrigeration:

Air purification, electrostatic separation, Multi pressure systems, Cold Storage units, Chillers, Blast Freezers, Absorption refrigeration, System Design and Development

Polymer Processing

PTA, Poly condensation, Melt Spinning, Drawing/ Texturing, Warping/ Sizing, Twisting

Design Fabrication and General Maintenance

* Valve Design/ Instrumentation and Maintenance of Pumps, Compressors and other rotary equipment
* Steel Shells and Storage tanks (API 650)
* Insulation and Cladding

Software Proficiency

* Solid Modeling and analysis using Mechanical Desktop, AutoCAD, CATIA, Ansys, ProE
* Project Planning using MS Project, Primavera
* Software Development using MS Access, SQL, Visual Basic, HTML

AGE: 38 years

MARITAL STATUS: Married

PASSPORT NO: E-752492

CURRENT TAKE HOME SALARY: (Basic) Rs.13000 + (Allowance & Other Benefits) Rs.22000 app

EXPECTED TAKE HOME SALARY: US$ 5000 neg. + Benefits as per policy

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 2492)

Go to Search Parameters...

Brief Description

Seeking full time employment with an oil company who needs a Loader Operator.

Safety Engineering professional with Oil and Gas Exploration and Production background, seeking a position as HSE Engineer in Offshore O&G Industry.

I speak English , Spanish and Russian language.

Morethan 11 years experienced HSE Professional. Holder of NEBOSH international General certificate and Diploma in mechanical and Industrial Safety. Worked with Oil and Gas, Civil and marine Projects.

Well testing technician

Working in the oil&gas industry since last 15 years(11y ears in abroad) working as a Sr. Commissioning operator.

Geologist

A chemical engineer with 30+ years successful track record in oil & gas, EPC and chemical industries in India and abroad seeking contract jobs or assignments

In my 23+ years working in the geothermal fields in the Philippines, I have developed skills engineering, management, administration, safety and other disciplines. I feel that I am qualified for any geothermal job.

Title: Senior Geophysicist

Operations Manager, Strategic Planning, R&D, Business Development, Budgeting, Forecasting, Lean Manufacturing Leader

AUTOMOBILE SALES MANAGER; FORMER U.S. ARMY STAFF SERGEANT, PETROLEUM SUPPLY SPECIALIST WITH LOGISTICAL BACKGROUND

I WISH TO APLLY FOR THE POST of a Field Engineer. Every other Information about me are contained In my cv below

Present Assignment: Specialist – MTBE Operations Department MTBE Malaysia Sdn. Bhd.(From April 2001 – Till date) (a wholly owned subsidiary of Petronas Malaysia)

I have worked on oil and gas rigs for 8yrs. I have worked floorhand, motorman, Derreks, asst driller. I know how to work on motors and diesel motors. I know how to weld.

Oil and gas exploration consultant with twenty years worldwide experience seeks project, contract, or position

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

A qualified Mechanical Engineer with 10 years of diversified experience in Pipeline and Plant Installation and commissioning as well as Polymer production and Structural Repair of components.

Environ and social impact expert, sustainable development project planner, monitoring and evaluation, stakeholders mgt, computer literate, B.Ag econs, M.sc, Ph.D (Rural sociology)

Wire Line Manager

Ph.D. Geologist with five years experience

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

I have more than 7 years experience in Offshore and onshore rigs in Pearsian Gulf and west and south of iran as drilling supervisor in Exploration, Workover and development wells and 1 year in AFD project as drilling Engineer, I familiar with high tech drilling tools such as power drive, auto trac

Dear sIr,I am ammonia operator who has 6 years experience as field operator and DCS operator in Ammonia Plant 1200 MTPD Kellogg Brown Roots Process.

Interface and Collaborate with Project Manager, Lead Engineers on development, planning and implementation Of Safety Guidelines and Procedure Manuals for New Hires

I’m looking for a career in the oil industry, working on the rigs. I have always been interested in oil and I am a practical person.

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

Bachelor in Petrochemical Engineering from Dr. B. A. Technological University, Lonere, India with first class distinction in the year 2000.

Field Engineer - UBD

: 8 yers experience in pre-commissioning & commissioning and normal operation of refinery and petrochemical operation

Engineer with land and offshore oil and gas experience. Diverse knowledge of safety, drilling rigs, drilling equipment, casing, down hole expertise, completion, workovers, coil tubing, production, operations and cost control.

I'm a Lead Mechanical Technician with over 15 years experience with a major Oil and Gas Company and with considerable background in production engineering work. Served a mechanical engineering apprenticeship with a diploma in process engineering.

Cost Controller with strong accounting background. Over 2 years experience as cost controller and 14 years as accountant with multinational companies. Technical skills include preparation of project cost control plans, budgets and forecasts, cost tracking, cost and revenue analysis etc.

I am a qualified fourth class power engineer , who is quite mechanically inclined. I able to work well independently or in a team atmosphere. I am a hard worker who is happy to take on new challenges. I am good at troubleshooting problems , and am a very safety conscious worker.

Pipeline Commissioning, Maintenance & Decomissioning Engineer

Experienced Safety & Security management professional with 21 years of experience and benefitted from ISO, NEBOSH and military background. Management experience with large workforce.

I am a high-energy enthusiastic and dependable individual who excels in challenging and competitive environments.

Mariner (Oil) with over 10 years of high quality shipping experience, now available and armed with Australian MBA, Six Sigma Green Belt, ISO 9001 Lead Auditor Certification, plus all other valid STCW'95; courses.

Key skills: Sales Admin & Support, Procurement, Supply chain & Computers

Installation, Operation and Maintenance Engineer (Mechanical)

Free! International analytical chemist, expert in gas chromatography and continuous emission monitoring with an emphasis on the analysis of chemical agents and explosives, refinery and natural gases, and raw and finished petroleum products.

Field engineer in ge oil and gas

12 + Years HSE experience, 27 + years overall experience on International Oil & Gas projects, dedicated professional with a hands on approach to maintaining the highest possible levels of safety. Effective organizational and good training skills; Experienced in onshore & offshore Middle East; Asia

Experience in Oil & Gas Production and Petrochemical (Ethylene Plant)

Diploma of oil industry, hi diploma computer programing Many courses were taken in Training & development Department to improve work ability.

Worked in all phases of the industrial plants. In commisioning, start up and debotlenecking. As a process engineer, with experiencie in process, production, facilities and process control systems. Supervised group of 12 people, implement ISO 9000/1400, Osha 18000, economic evaluations and management

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out