Resume - AIR SEPARATION PLANT Operator

Misco Jobs

Resume #72016

CONTACT INFORMATION:
View contact information...

EMPLOYMENT RECORD

INDUSTRIAL GASES COMPANY INC. ( INGASCO, INC. )
A TAIYO NIPPON SANSO GROUP
Banay-banay 1st San Jose, Batangas
Philippines

Position: AIR SEPARATION PLANT Operator
Date: April 2007 to present
Focus: Provides a high level of expertise and know ¡V how in AIR
SEPARATION PLANT operation.

„« Functions as the Shift Supervisor ( in his absence): rest day-off, vacations leave and Holidays.
„« Operates MMG15500 AIR SEPERATION PLANT (capacity @ 100000Nm3/day) and MG5000 NITROGEN LIQUIFACTION PLANT (capacity @ 120000Nm3/day) @ high efficiency; to produce Liquid Oxygen, Liquid Nitrogen and Liquid Argon @ acceptable quality. To maintain plant machine and equipment in good operating conditions.
„« Operates control panels @ control rooms by taking reading of the units and follow through / attend to recorded abnormalities or readings beyond parameters.
„« Responsible for local, DCS & Delta ¡V V operation of equipment, compressors, refrigeration unit, driers, heat exchangers, rectifying columns, DE-OXO unit, expansion turbine, heaters, cooling water system and other balance of plant.
„« Review historical lists of reports and alarms turned ¡V over by the Outgoing Duty Shift Supervisor / ASP Operator & makes necessary actions on abnormalities found.
„« Give instructions to Assistant Plant Operator whenever there is start ¡V up, shutdown & other adjustments to be made & check on the field.
„« Performs duties on a three ¡V shift basis.
„« Trains Assistant Plant Operator as part of personnel training & development.
„« Performs other related functions as maybe assigned from time to time.

Position: Assistant Plant Operator
Date: March 2003 to April 2007
Focus:
„« To operate of ASP / NLP in accordance with the standard operating procedures and manuals.
„« Perform in ¡V process & finished & product testing.
„« Report to Plant Operator / Shift Supervisor any machine / equipment abnormality, corrective actions & adjustment made.
„« Perform preventive and corrective maintenance work on machineries & equipments of the plant.
„« Records machine performance & adjustments under taken in the log sheet / log book.
„« Perform cooling water monitoring & treatment.
„« Charge PBC & lorry trucks.
„« Performs other tasks that assigned by immediate superior.

Thermo ¡V Multi Technology
236 S. marques St., Ph. 3 Gatch. II, Subd.
Philippines

Position: CADET ENGINEER
Date: November 2002 to February 2003
Focus:

„« Assist in maintenance & fabrications of boilers.
„« Visits & inspects project sites.
„« Prepare reports & recommendation of set ¡V up & other related materials of each visited site.
„« Performs other related function as maybe assigned from time to time

EDUCATIONAL BACKGROUND

TERTIARY:

TECHNOLOGICAL UNIVERSITY OF THE PHILIPPINES
Ermita, Manila
Bachelor of Science in MECHANICAL ENGINEERING
1998 - 2002
LICENSED MECHANICAL ENGINEER

SEMINAR / LECTURES ATTENDED

CHEMICAL SAFETY SEMINAR
INGASCO, INC., Batangas Training Room
Banay ¡V banay 1st San Jose, Batangas
October 30, 2006

SAFETY AWARENESS ORIENTATION
INGASCO, INC., Batangas Training Room
Banay ¡V banay 1st San Jose, Batangas
February 20, 2006

Product KNOWLEDGE & SAFE GAS HANDLING SEMINAR
INGASCO, INC., Batangas Training Room
Banay ¡V banay 1st San Jose, Batangas
June 28, 2005

ISO AWARENESS & ORIENTATION SEMINAR
INGASCO, INC., Batangas Training Room
Banay ¡V banay 1st San Jose, Batangas
March 10, 2004

COMPUTER EXPOSURE

ƒæ Ms Word
ƒæ Ms Excel

CHARACTER REFERENCES
Will be provided

PERSONAL DATA
Birthday: 12 August 1980
Civil Status: Single
Height: 5'10"
Weight: 190 lbs
Religion: Roman Catholic
Provincial Address: Kalibo, Aklan

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 2500)

Go to Search Parameters...

Brief Description

Please Contact ASAP

Over 13 years experience as an Advanced Care paramedic. Extensive remote area paramedic coverage-Pipeline construction and oilfield exploration rig. Helicopter rescue/retrieval.

AIR SEPARATION PLANT Operator

Education qualifications: July 2005 - B.Sc of chemistry & geology

I am a chemical diploma holder and having 02 years apprinticeship as plant operator from fertilizer (Ammonia Plant) FFBL and having round about 06 years oil and gas processing plants experience.

Functioning in a project/program management consulting role for MAXAM and CYANCO Companies on highly sensitive processes. In these assignments, I assembled high-performing teams that delivered a complex project plan ahead of schedule, despite a demanding timeline and aggressive business objectives

A senior-level environmental, safety, security and health professional who has worked in the manufacturing as well as EHS functions for private firms as well as large corporations and consistently contributes to corporate goals. A proven trouble-shooter, problem solver and innovator with a strong t

I am working as a Executive Engineer in SIEMENS PAKISTAN LTD IN Engineering, Construction & Maintenance Department (Oil and Gas Projects). Currently working on a Project of Lasmo ENI Pakistan Limited working as a field engineer & had gained a experience of Construction of Structure & Piping.

BS in Petroleum Geology.

Twenty-two years experience in detailed FEED - mechanical, thermal and process design of pressure vessels, direct fired process heaters, hot oil heaters, boilers, pressure pipework, heat exchangers, reactors, incinerators, furnaces and associated ancillary equipment for petrochemical plants.

Key Technical Skills

Drilling Fluids Engineer / Consultant with expertise in all drilling fluids including Silicates, Glycols and syntetics. Expertise in deep water, ERD and HPHT enviroments. Skills in operations, coordination, tendering, well site, marketing and presentation

IIT Chemical Engr with 23 yrs exp in Sales & Marketing of Downstream Petroleum & Petrochemical Products in Fortune-500 Oil & Gas Company

Three years apprentiship as plant operator in pakistan oilfields ltd

More than 6 years experience in Oil and Gas Production field. And Educational Qualification is Diploma in Mechanical Engineering

Communicates well at all levels, high integrity and personal commitment.Good organisation and leadership skills.

Work Over and completion for onshore rig

Pre sales consultant, product consultant, business analyst

APICS (CPIM) certified, Graduate diploma in Production Engineering

Petrochemical Process Operator dealing with Polypropylene and Polyethylene production. More than ten years experiences with processing, treating materials, handling of product, pre-commissioning, commissioning activity and start-up the new plant.

EXPERIENCED MARINE SUPERINTENDENT - MASTER MARINER, FPSO / TANKERS / SHIPYARD / OFFICE BASED

Was involved in the pre-commissioning of Utilities system through close liaison with construction and subcontractor personnel.

14yrs oil and gas experience covering pipeline pigging operations, pipeline inspection activity, fpso production operations in crude oil plants, water reinjection plants, gas reinjection plants, gas dehydration plants, produced water handling and discharge, safety management and implementation

Experienced truck pusher, driver manager, frac. tanks and vacuum trucks

More than 30 years of experience in Control & Instrumentation field, out of which 28 years in a leading Engineering Consultancy organization MECON Ltd. (Govt. of India Undertaking) in Steel, Non-Ferrous, Chemical, Petrochemical & Power

Sir, as I am working since couple of decades in oilfield both onshore and offshore I have come across all sorts of jobs related with mobile land and offshore rigs, jackup self elevated platforms, barges heavy lift ships upto 2ooo ton crane capacity, engines cat, GM, cummins, mudpumps,bop,X" valves

PRODUCTION PLANNER,PRODUCTION CONTROL 25+YEARS EXPERIENCE

B, Tex/ch chemical engineer having experience in Oiland gas with 14 years

HSEQ manager, management system development, auditing, safety case development

Very good experience in the mechanical maintenance of various oil fields, gas companies and refineries. Familiar with day to day maintenance planning, shutdown planning , CMMS and IPP syatems.Familiar with Primavera P3-e, MS Project, SAP-R3, MAXIMO&TEROMAN. Budget preparation&cost control

Machanical & Auxiliary Operator power plant in Wartsila 18V46 & 20v32 Engines Exhaust Gases Boilers, Aux. Boilers, Oily Water Treatment, Membrain Water Treatment & Wesfalia Separators &11Kv cable installation Drill jumbos shotcrcat equipment & submersible pumps working in the Excavation and Linin

Training

To put my best possible efforts by applying my professional qualification and expertise in order to enhance the image of the organization in which I am working.A challenging position requiring creative and innovative approach to Oil industry , Quality control of sales oil, Crude oil process, Laborat

I am a Diploma Mechanical Engineer and am an oil & Gas production / plant operator, having Ten Years experience. Now I am working for OXY (Occidental Petroleum of Qatar ltd) and QP as Well Completion Assistant and Well-head Operator through SOS (Specialized Oil Services)

3rd Class Power Engineer with sour gas and oil operating experience. Currently involved in start-up and commissioning large hydrocarbon upgrader.

Diploma in Petro-Chemical Technology

10years of in depth and rich experience with various reputed organizations; currently serving at Essar Oil Ltd, Vadinar Refinery.Possess domain expertise in plant operations (Air separation plant)/safety/Pre-Commissioning & Commissioning including conceptualization, planning and execution of project

I have Bachelor Dagree in Chemical Technology and have 6 year working experince in refining field in operation

NQF, National Qualification Forum, Qualified as Production Artisan Grade 4

experienced professional seeking work as facilities engineer

Capt Amit Bhandari, DPO. Experienced on offshore supply and deep sea anchor handling vessels. 220 T bollard pull. Carried out towing operations, rig moves, pipelaying assistance. Holding DP courses and certification

Working at Syncrude Upgrader, operating hydrotreater units for 2.5 years. Working on turnaround projects, catalyst changeouts, start up and commissioning. I have a 4th class Power Engineer certificate as well as a Process Operator Technician certificate.

Commissioning engineer of C2-cracker plant, Operation engineer of c2-cracker plant,operation engineer of gas refinery and SRU

IT- Co ordinator,Help-desk manager

Engineer / Supervisor Oil Industry upstream production, maintenance & construction. Large field oil production supervision, light & heavy crude oil, well ops & monitoring. Tank farm & ppln construction. Budgeting & Contracting Eng

Seismic data Interpretation is a complex yet challenging aspect of geophysical sciences. Getting this work write not only requires patience but needs a knack of enthusiasm and adventurism along with a sense of responsibility. Same experiences you will find in my CV.

A Mechanical Engineer who’s very fortunate, always in jobs that were challenging. Resourceful, analytical and detail-driven individual with capabilities in completing multiple tasked with competing deadlines. Aggressive in identifying and resolving inefficient operational processes.

Chemical Engineer with 10 yrs 4 months experiences in Refinery Operations, Process, Commissioning, hazop and safety

Offshore Crane Operator currently seeking equivalent position w/ proven potential for advancement to BCO

Looking for work opportunities preferably in the area of Completions database administration/Punchlist/Handover. Work experience of over 10 years with 5 years in the Oil and Gas commissioning sector. My skills are multi-tasked mostly in project documentation and completions database administraton.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out