Resume - Process Engineer with specialisation in oil and gas upstream design.

Misco Jobs

Resume #72210

CONTACT INFORMATION:
View contact information...

Present Company Mott MacDonald & Co LLC, Muscat, Oman
Nationality Indian
Year of Birth 1983
Profession Process Engineer
Specialisation Process Design for Oil & Gas
Total Experience 3 - 4 Years
Year of joining Firm May 2006

Qualifications:
* B.E. Chemical from Shivaji University in the year 2005 with First class.
* Diploma in Chemical Engineering from MSBTE (Maharashtra State Board of Technical Education) in the year 2002 with First class.
* Undergone 6 month training from Institute of Professional Training & Research, Thane - India in 2005. Program included hands-on experience through project-work on the subjects of Plant & Project Engineering, Process Engineering, and Engineering Packages, Heat & Material Balance etc.

Key Work Experience:

Process Engineering Industry Professional with 3-4 years of experience in Oil and Gas consultancy.

1. Preparation of Process Design Packages for Oil & Gas and Chemical Industries with wide exposure to process engineering activities covering the following:

- Front End Design involving activities like separator sizing, preliminary line sizing, flare load calculations, sterile area calculations; preparations of reports such as drains philosophy, isolation philosophy etc.
- Understanding philosophy for Pre-commissioning and Commissioning to indicate Flushing loop and Air-leak test loop on P&ID.
- Compressor settle-out calculations.
- Process Review and Flare Study for flare system adequacy check involving Flare network study and PSV back pressure calculations.
- Gross fluid pipeline steady state and transient analysis (surge calculations) using software-PIPELINE STUDIO (TGnet for gas pipeline & TLnet for liquid pipeline)
- Flare network hydraulics.
- Two phase relief valve calculations.
- Preparation of Process Flow Diagrams and P&ID's.
- Preparation of Process Data sheets of Instruments which includes Control valves, Relief valves, Flow Instruments, Restriction Orifices, Breather valves etc.
- Tank sizing calculations.
- Preparation Isolation and drains philosophy; Operating, control and safeguarding philosophy.
- Preparation of EORD (Engineering and operations reference document) giving operating envelope for equipments such as pumps, separators etc.

2. Worked in PDO's one of the important Enhanced oil recovery (EOR) project – Marmul Polymer Flooding.

3. Worked in PDO's one of the important Enhanced oil recovery (EOR) project – Nimr-C Full Field Water Injection Project.

4. Attended Design Review, HAZOP and IPF review for Marmul Polymer Flooding Project and Nimr-C Full Field Water Injection Project.

Career Objective:

To obtain a challenging and demanding job in Chemical Process Industry that will further enhance my knowledge, skills and carrier growth

________________________________________
Career Summary:

Jan'07 – Till date Mott MacDonald & Company L.L.C (Oman)
Junior Engineer - Process

May'06 – Jan'07 Mott MacDonald Consultants (India) Pvt. Ltd.
Junior Engineer - Process

June'05 – May'06 Process System Engineers Pvt. Ltd.
Junior Engineer - Process

Professional Experience:

Jan'07 – Till date Mott MacDonald & Company L.L.C. (Oman)
Junior Engineer – Process
May'06 – Jan'07 Mott MacDonald Consultants (India) Pvt. Ltd.
Junior Engineer – Process

Working as Junior Process Engineer and involved in following key process engineering activities like.

* Hydraulic Calculations (Line sizing, Pump sizing etc.) for Non-Newtonian Fluid (Pseudoplastic).
* Preparation and updation of Piping & Instrumentation Diagrams.
* Preparation of Process Datasheets for Equipments such as tanks, pumps, chemical injection skids etc.
* Preparation of Process Datasheets for Instruments such as flow meters, relief valves, breather valves, control valves etc.
* Hydraulic Calculations in a spreadsheet format.
* Preparation of Safeguarding Memorandum.
* Preparation of EORD (Engineering and Operations Reference Document).
* PSV sizing calculations.

Projects handled as under:

* Process Review and Flare Study for flare system adequacy check for Petroleum Development Oman.
Project consisting flare system adequacy check for new flare load. Activities done under this project were: calculation of backpressure on PSV's in the flare network and flare header sizing calculations.
* Al Ghubar Water Disposal Pumps Replacement project for Petroleum Development Oman (PDO).
Project consisting demolition of existing pumps and installation of new pumps. Activities done under this project were: preparation of P&ID's, PSFS, safeguarding memorandum, existing breather valve adequacy check. Proposing different phases of demolition and construction so as to minimise period of plant shutdown to execute the project. Attended Design review.
* Moleeta – Oil Field Development
Front End Design involving activities like separator sizing, preliminary line sizing, flare load calculations, sterile area calculations; preparations of reports such as drains philosophy, isolation philosophy etc.
* Nimr-C Water Injection Project.(In progress)
Pipeline hydraulics using PIPESIM modelling software.
Atmospheric Flare – capacity calculation, Preliminary flare stack sizing, KO drum sizing.
Calculated Blanketing gas requirements of the facility.

* Marmul Polymer Flooding (Enhanced oil recovery) Project - In Progress.
PDO's (Petroleum Development Oman) one of the important Enhanced oil recovery project consisting of Polymer injection in water disposal wells to enhance crude oil production. EPC contractor is SNF Floerger, France. Involves two areas viz. 1) Polymer preparation plant 2) Water treatment plant.
Design activities done under this project mainly includes: Material balance, Flowline Hydraulics of non-newtonian fluid (Pseudoplastic), Preparation of P&ID's, datasheets, safeguarding memorandum, Blanketing gas network analysis, EORD's, Sterile area and dispersion calculations using Shell-fred software (Fire release, radiation, dispersion hazard consequence modelling package), calculation of Instrument air, process air and nitrogen requirements of polymer plant.
Hydraulic steady state analysis of pipeline using PIPESIM software.
Attended Design review and IPF review for the project.

Jan '05 – May '06 Process System Engineers Pvt. Ltd.
Junior Engineer - Process

Worked as a junior Process Engineer and was involved in all process engineering activities as under:

* Indicating Flushing loops and Air-leak test loop on P&ID's.
* Designing and sizing of various equipments like pumps and heat exchangers.
* Sizing of P.S.V. according to A.P.I.- 520.
* Vendor Drawing Review and Discussion/ Co- ordination of the same along with the vendor and departments like piping and layout.
* Preparation of Process Datasheets for control valve and flowmeters.
* Hydraulic Calculations in a spreadsheet format
* Utility equipment sizing calculations
* Preparation of Control narrative, Sequence Flowchart, Cause & Effect Charts, etc.
* Interacting with Clients.

Projects handled as under:

* Bunduq-Gas Reinjection Project.
Activities carried under this project involves: Understanding philosophy of pre-comissioning and commissioning, P&ID mark-ups for indicating flushing loops and air leak test loops.
* I.R Acid Plant
Activities done are: preparation of P&ID's, pump head calculations, line sizing calculations, process data sheets etc.

________________________________________
Software skills:

* Conversant with ASPEN HYSYS
* Shell FRED 4.0 Hazard consequence modelling package to study 'Fire, Release, Explosion & Dispersion' of toxic & flammable gases for various cases such as relief / draining from pit, etc.
* Pipeline – steady state and transient analysis, surge calculations using PIPELINE STUDIO (TGnet and TLnet software).
* PIPESIM-Hydraulic network study/analysis.

Codes and Standards known:

* Shell Design Engineering Practices (DEP's).
* American Petroleum Institute (API) Standards.
* National Fire Protection Association (NFPA).
* Petroleum Development Oman Standard practices (SP), Guidelines (GU) and Engineering Reference Documents (ERD's).

References:

Two references are as below.

Mr. Amar Naik
Principal Process Engineer
Mott MacDonald consultants (India) Pvt.Ltd
Mumbai,INDIA
+91 30835177
amar.naik@mottmac.com

&

Mr. Sameer Narsapur
Senior Process Engineer
OPQL,Operations Support
Doha,Qatar
+974 4459256
sameer_narsapur@oxy.com

Passport Details:

* Passport no. – F 8897798
* Date of issue – 11/07/2006
* Date of Expiry – 10/07/2016
* Place of issue – Thane, India

Personal skills:

* I am very passionate about my career & eager to further develop my skills in the various activities of a Chemical Process Industry.
* Given opportunity I can adapt very quickly & prove my worth in the company.
* I am mentally very strong & love challenges in life.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 2478)

Go to Search Parameters...

Brief Description

Process Engineer with specialisation in oil and gas upstream design.

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Data Management position in a growth-oriented

Professional contract negotiator & administrator

Work over supervisor, fishing specialist, slick line coordinator, well testing coordinator, wells technician

Responsible for industrial safety aspects, envoirnment protection, fire prevention, control / monitor initiate risk assessments, modification / maintain fire & safety system & equipment.

College Degree: Bachelor degree in Geophysics(Geology college-Geophysics Branch),

Drilling Engineer, Drilling Supervisor

Post grdaution - MBA (Finance), Graduation - BE ( Mechanical Engineering) with Power and Steam Generation Projects, Operations and Maintenance Experience

Rigging & Heavy Lifting, Computer,Autocad.Microsoft Office Spread Sheets.

11 years of experience in Managing Technical and QHSE in various Multinational Petroleum Refining and Marketing companies, including Shell and TOTAL and worked with their senior management in launching various projects and initiatives in the company.

SAP MM, PM

Project Manager Deepwater, Regulatory Compliance

I am currently the ESP / VSD Supervisor for Encana-Ecuador in the Tarapoa field. I have extensive ESP experience with all lines of equipment and most lines of surface equipment.

Experience on board American FPSO, experience on board two VLCC steam tankers, Familiar to work with multinational crew, My rank in class is the second highest position, Bachelor degree of marine engineering

I am a highly motivated individual who works hard and is seeking to gain experience in the oil and gas sector. I have been challenging myself on upgrading my education so that I may have the best possible chance to attain employment in this field.

Ten years experience as product planner/supply scheduler for Eastman Kodak Company in the clinical instrumentation division. MRP APICS Certification. Additional knowledge in Shop Floor Control, Capasity Management, Inventory Control. Worked closely with engineering, purchasing, assembly control.

I am seeking a position in your esteemed organization, Hawk Petroleum Inc. for Sales, Marketing, Trading of Petroleum Products in South East Asia (Indi)

PETROLEUM (PRODUCTION ) ENGINEER

Free! I began working in the oil and gas industry in 1993 at the age of 17. Since then I have worked very hard to continually improve my knowledge and abilities, and have recently been promoted to Production Foreman at the age of 31. All of my experience has been in offshore California.

Mud logging, drilling planning, drilling operations, production operations, mud engineering, drilling and production monitoring.

Stanford MBA, BSc, (Mechanical Engineering); Seasoned Oil & Gas professional with 14-years international leadership experience in engineering, project management, procurement and contracting, and commercial activities

Geotechnical engineer with offshore foundation design analysis

Lead Instrumentation Technician

Experienced in a wide range of wireline services on Baker Atlas equipment, including operations in Azerbaijan, Kazakhstan, Uzbekistan, Thailand, Qatar, U.A.E (Abu Dhabi), Kuwait, KSA and Singapore Remotes. A strong educational background. Knowledge of Open Hole and Case Hole Logs, WL and TCP perfora

Highly experienced project professional with broad engineering, maintenance and construction experience. Competitive by nature with a consistent focus on the “Bigger Picture”. Outstanding track record and highly adept at managing high-criticality maintenance and construction projects.

Developed a Polypropylene laboratory single handed from scratch to an operational lab

Young enthusiastic Engineer (B.Tech Hons.;IIT - Kharagpur) just graduating with 120+ days of field experience in drilling , safety and scheduling. Good computer skills and a diverse course content in college.

Working in the field of GIS and Remote Sensing for the last four years with an MNC in India. Interested to work in oil and gas sector and interested to use my experience in this sector.

I am Mechanical Engineer with first class career Record. I have 4 years Exp in the power Sector. I have Boiler Proficiency Certificate, which is essentials for Boiler Operation.

Having exposure in erection, commissioning, operation and maintenance of Utilities & Power Plants like Gas turbines Power Plant ,Wartsila Diesel Power Plants, High pressure steam Boilers , Steam Turbines, Preatment Plants of Raw Water and Chlorination system , Clarifloculators , DM Water Plants,

I work for around 20 years in the field of Control Room&Field Operator for Polymerisation Fiber Plant in Indian Organic Chemicals Ltd Manali Chennai, 16 Years Exp CONTROL ROOM PRODUCTION ZEOLITE Plant Operator in Oman Chemical Industries Company (S.A.O.G. At Sultanate Of Oman Muscat, 4 years exp

Extensive experience in Health, Safety and Environment both in the onshore and offshore projects. Over 15 years practical experience as a field staff and Project Execution Management. Oversee a host of Platform Revamps and Retrofit works, flow lines construction, hot taps and dredging operations.

Thermo-Energy Engineer

I am a dynamic, reliable and autonomus person who like working in team. Over the past years, I have demonstrated a lot of leadership. I enjoy new challenges. My previous experiences helped me to discover new fields and acquire a methodic way of working. I possess a strong sense of responsibility. M

IFP-SCHOOL: PETROLEUM ENGINEER OBJECTIVES Armed with a strong technical background in OIL&GAS well construction (Drilling, Wire-line, Production) and attached to the field, I want to orient my career to well and operations Engineer.

Diploma engineer in Chemical Technology with over 16 years experience in Production Operations of Oil & Gas fields, Refinery and Petrochemical industries. Presently, working as General operator in Gas Production, Processing, Transmission and Re-injection facilities of Qatar Petroleum-QP.

Senior Engineer in plant operations & maintenance of power plant & other utilities equipment with a substantial background in the power and water industry.

With a Petroleum Engineering degree and more than 12 years experience in E&P industry

Diploma Chemical Engineer with 13 years of experience in Petrochemicals(Ethylene/propylene/Ethane/Propane/Gasoline),Gas(LNG,Natural Gas, Refrigerant),Wiped Film Evaporator, Filter, Filter-Dryer etc

Design engineer, Process Engineer ,Mechanical Engineer(entry level position)

Expert level in phosphate processing technology-PA,PPA,Feed phos,STPP,P fertilizers TSP,MAP/DAP

Seeking a position where years of Operational management, sales, marketing and management experience will add value to operations. "A position in sales and marketing where my talents can be utilized to increase market share and company profits while pursuing new opportunities for career challenges w

I have over five years of oilfield experience. I am a highly motivated person who is able to contribute as a team player and also work independently under pressure using my own initiative. I possess excellent communication, listening, and presentation skills .I am also a strong leader and organizer.

Broad experience of oilfield infrastructure, water,sewage treatment , gas turbine stations, oil pipelines, rig sites, industrial building, housing, earthworks, rail & general civil, mechanical & electrical works in UK, Africa & Asia. Project and Site Management in a variety of challenging locations

PIPING PDS DESIGNER

EXPERIENCED HEALTH/MEDICAL PHYSICIST-ENGINEER-SCIENTIST

MBA graduate with 5 years experiences in oil and gas industry (4 years in the field operation and 1 year in the financial evaluation of oil and gas projects)

Professional career spans 16 years in field of contracts and procurement management, strategy formulation (for high spend areas), strategic sourcing and supply chain process reengineering.

Oil market analysis, oil pricing mechanism/simulation and modelling, forecasting, market research, oil industry management, downstream oil industry facilities monitoring, fuel quality monitoring and evaluation, project management, project proposal preparation, oil and gas project evaluation,

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out