Resume - Prepare shift report to Shift Supervisor for the working activities based on dat...

Misco Jobs

Resume #72288

CONTACT INFORMATION:
View contact information...

Place/Date of Birth: Rembang,16 Juni 1982
Nationality: Indonesian
Religion: Moslem
Marital Status: Single
Height / Weight: 170 cm / 55 kg

FORMAL EDUCATION

2005 ¡V 2008: Institute Teknologi Pembangunan Surabaya
1998 ¡V 2001: SMUN. 1 Cepu
1995 ¡V 1998: SMPN. 3 Cepu
1989 ¡V 1995: SDN. Tambak Romo I, Cepu

COURSES ATTENDED

March 12-17, 2007: the Class one of Operator Boiler by Depnaker
July 10-12, 2005: Reverse Osmosis plant by Metito
August 2003: Plant And Panel Operator Petrochemical / Oil and Gas by
Pusdiklat Migas Cepu

WORK EXPERIENCES

1. PT. Trans Pacific Petrochemical Indotama (TPPI) Multinational Company
Refinery and Aromatic Plant UOP Technology

Line of Business: Refinery and Aromatic.
Product & Capacity: - P-Xylene
- Xylene
- Benzene
- Toluene
- Light Naphtha
- Kerosene
- Gas Oil
- Mix Xylene
- Heavy Aromatic
- Reformate
- Residue
Position: Operator Utility.
Working Period: 3 years (Maret 2005 to Present)

Responsibilities area:

1) 2004 ¡V 2005, At the Project Supervising the contractor's working
„X To prepare of standard Operating Procedure (SOP) for PreCommissioning, Commissioning, and Start up of off Site Utility.
„X Checking of piping installation and Instrumentation as per P&ID and Isometric (Punch out of lines).
„X Inspection of Columns Internal, SWRO (Sea Water Reverse Osmosis), Deaerator, Boiler, HRSG, Combustion Turbine Generator, Sour Water Stripper, Cold Box, Tanks before Boxing up.
„X To recheck all of contractor's work in according to the project schedule and design (Erection, Piping & Equipment Acceptance).
„X To recheck process engineering flow diagram, piping & Instrument Diagram, Vessel Entry, Work permit and Chemical Store.
„X To advise management on new policies for engineering inspection and techniques for condition monitoring, reliability and life expectancy of Off Site Utility plant equipment.
„X To follow system established policies and professional engineering standard.

2) 2006, On Start Up, Involved activities of Pre Commissioning and Commissioning, such as: Flushing of lines, Steam Blowing, Cooling water line flushing, Hydro Test of equipment along with connected piping, Water Run test of pump, Safety Valve Popping Test, Vessel Internal Inspection, Cold & Hot Acid Trial, Interlock Test of DCS, Heating Up, Making of SOP System and Trial Production.

3) 2006 ¡V at present, On Commercial Production
„X To manage the dedicated area of responsibility of OSU facility person in shift basis in accordance to the agreed planning prepared by OSU Shift Supervisor.
„X To organize my team to meet the OSU objectives within my area of responsibilities.
„X To develop my team member capabilities to meet the operation team member to be capable in operating the facility, also as first line SHE/Emergency Response Team, facility inspector and quality control.
„X To conduct trouble shooting in case problem occurs or recommendation for problem solving including process/operation improvement.
„X To prepare and update the operating philosophy, procedure, instruction together with operation Plant Engineer for the OSU Facility.
„X To maintain and ensure the reliability of the OSU Facility.
„X To set up the productivity to meet the (Aromatic, Tank & Marine and Infrastructure) customer's demand.
„X To administer any problems/incident/accident, identify and provide trouble shooting and/or problem solving guide to the Operation Shift Personnel or assist the Technical Department.
„X To check and verify that the works, schedule and procedures area implemented in proper manner.
„X To prepare shift report to Shift Supervisor for the working activities based on data received from subordinates.

4) Utility Plant o Power Generation.
„X Combustion Turbine Generator, 3 X 21 MW, Type MS 5001, manufactured by Nuovo Pignone, Italy
„X Emergency diesel generator, manufactured by PT. Trakindo with capacity 3 X 1.5 MW
„X Fuel Oil and Fuel Gas System. Fuel Gas Booster Compressor, manufactured by MAN Turbo with capacity 2 X 9 T/h o Steam Generation.
„X Aux Boiler (1 X 90 T/h), Heat Recovery Steam Generation/HRSG (3 X 75 T/h) manufactured by PT. DKME.
„X Boiler feed water pump with capacity 3 X 250 T/hr, 2 turbine driven and 1 motor driven
„X Steam condensate system
„X Deaerator and accumulator drum with capacity 585 T/hr
„X Steam letdown station (HP-MP-LP) with pressure 43 Kg/Cm2, 17 Kg/cm2 and 3.5 Kg/cm2
o Water Treatment Plant with capacity 4 X 50 M3/h, (Demineralized, Polisher and Neutralization Package Manufactured by PT. Metito)
o Treated Cooling Water Closed loop system (4 X 6000 M3/h) 2 turbine driven, 2 motor driven and 12 units of Plate & Frame Heat Exchanger (PFHE)
o Sea Water intake (4 X 7000 m3/hr), type submerged pump) 3 motors Driven, 1 turbine driven o Electro Chlorination Unit / Sodium Hypo chlorite Generator o Waste Water Treatment Plant, manufactured by PT. Kormac Pratama o Sour Water Stripper, manufactured by PT. Sanggar Sarana Baja.
o Incinerator package, manufactured by PT. Kormac Pratama o Instrument Air / Plant Air, 4 X 5000 Nm3/h, manufactured by FS Elliot Company.
o Flare (Main flare with capacity 1800.000 kg/hr and Utility Flare with capacity 785.000 kg/hr) manufactured by John Zink o Nitrogen Plant with capacity 3000 Nm3/h, high purity 99.90% gaseous nitrogen (GAN), O2 content 5 ppm and 200 Nm3/h liquid nitrogen (LIN), Manufactured by United Air Product

3. Unit Pengolahan Minyak dan Gas Pusdiklat Migas Cepu Multinational Company

Line of Business: Oil and Gas
- Product & Capacity:
- Pertasol
- Kerosin
- Gasoil
- Residu
- wax
- Fiber
Position: Proses Operator. Report to Shift Supervisor.
Working Period: 1 years (October 2004-2005)

Responsibilities area:
1) To in charge and responsible for the smooth and safe operation of Proses and ensure understanding of problem & solution to Unit Process
2) To direct and coordinate the activities of the plant with objectives of achieving production targets and assuring safety of plant machinery and personal.
3) To handle of various unit operations, such as, Boiler, Air Compressor, Separator, Heater/Furnace, Evaporator, Cooler, Fractination Coloum, Heat Exchangers, Pumps, Tanks,, and Field Operation & Troubleshooting.
4) To make production daily report and write analytical method & technical report and always concern safety work.
5) To make weekly report and monthly report of Unit Process
6) To study plant operation, emergency manual and procedure shut down/start up.
7) To continue monitoring quality product & reliability equipment from Unit Process.
8) To implement plant modification work in accordance with established procedures and approval plan.
9) To originate system/plant modification to improve safety, reliability, efficiency and productivity.

10) Unit Process
1.Feed exploration from Ledok, Kawengan, Nglobo, Wonocolo,kinds of crude oil: paraffin and naphtain.
2.Capasity Unit Process 300 M3

3.Product: Gas, Pertasol, Kerosin, Gasoil, Wax, and Residu.

Additional o English pasif.
o To understand of HAZOP (Hazard Operability).
o To understand of JSA (Job Safety Analysis).
o Have Basic Petrochemical Training for Mental & Discipline at Komando Latihan Marinir Surabaya Indonesia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 2492)

Go to Search Parameters...

Brief Description

Senior Professional Geologist

Business Development Executive with over 7 years of experience

Attended Service Training for Stack/Process Gas Analysers at M/s SICK Maihak AG Hamburg,Germany (5.09.05 to 9.09.05) for Models S700 Series .(NDIR,Paramagnetic,Thermor,Finor)

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

At the present time, I am working as assistant unit controller at PT. PowerGen Jawa Timur ( Private Power Project Phase II Coal Fired Thermal Power Plant 2 x 610 MW ).

I am a Quality Health and Safety Management Consultant with more than 16 years experience in Middle East . I am a Lead Auditor for ISO9001:2000; ISO14001:2004 and OHSAS18001:2007. Apart from this I am NEBOSH-UK Certified HSE Advisor . Has rich exerience in evaluating Management systems

Highly Skilled Civil Engineer

Training/HR Professional, Accredited Vocational Assessor with experience in the areas of Performance Consultancy, Personnel Development, Recruitment, Competence Based (NVQ) Training Systems and Certification, Training Needs Analysis and Evaluation within Oil/Gas, Nuclear, Defense and Railway Industr

manager/worhop/service/electrical

Senior management professional with extensive experience in Management & Operations of IT & Telecom Networked Infrastructure and Systems, Managed Services, Information Security, Process Modeling, SAP Implementation, Consultancy etc across industry segments.

MWD/LWD Field Service Engineer (4 yrs), Drill Bits Evaluation & Sales Engineer (2 yrs)

Technical assistance, as control system field engineer (speedtronic MKV specialist), during installation of two Gas Turbine model PGT-25-DLE compressor driving. Training, as control system field engineer during performance test of Steam Turbines and Centrifugal compressors also training course on Ga

I am Electronics and Communication Engineer and I have more than Three and half years experience in marketing and business development in Dubai and Indian subcontinent.

4 years experience in Land Logistics and Petroleum Transportation Handling

I have been in the construction industry for 16 years. 7 years in in the Drywall trade, all phases, including owning a Drywall Company. I have framed houses, poured concrete, and been a general laborer. Most recently I have been in the glass industry. Estimating, ordering, installing and managing.

Project Manager, BPO Mobilization Lead, SAP Consultant, ERP tool Administrator

IT/Business/Analytical professional with experience in the Gas, Safety, and Welding industries as well and inventory planning and forecasting in the auto industry.

Amos RAST Database builder, PMS Engineer, Marine Engineer Liscensed, Support, Maintenance, Planning

I am an experienced medic, with some 16 years offshore experience in the offshore Oil & Gas industry, both on floating and fixed installations in the UK sector of the North Sea, ROV construction and support and, most recently, offshore wind farm construction vessels off the UK coast.

Offshore/abroad experience

Safety & Environmental Specialist with excellent knowledge and experience. Please refer my resume with complete details available.

Experienced Ops Engineer

Petroleum Engineer, 4 years industry experience in Logging, reservoir and drilling fluids.

Performing the day-to-day maintenance activities of the oil and gas plants in coordination with DCS Technicians and Sr technicians.

Programming VB6, ASP,COBOL,Oracle,MS SQL server,MS Access, Lotus Notes R5,

Senior Process Operator

Well site supervisor with southeastern New Mexico/West Texas drilling experience. Experienced with PDC bits, High pressure, Drilling with brine and weighted mud, Lost circulation/ seepage issues, Have current well control card. I am a safety leader and apply my knowledge to every task.

Electrical Engineer with 16 years experience in the field of Electrical & Instrumentation. Engineering and Project Management

„« Project Erection & commissioning in Pidilite Industries Ltd, Vapi ¡VGujarat having FOXBORO DCS (Micro I/A Series ) as control system.

CV for AutoCAD Operator, Document Controller & Technical Assistant

Yokogawa DCS & Instrumentation professional with over 13.11 years of Experience entailing achievements in Erection, Installation, commissioning & Maintenance of DCS & Field instrumentation systems

High School Graduate- Entry Level

Graduate in chemical engineering having 11 years of expereince in Projects and Production.In depth knowledge in Sulphuric and Phosphoric acid technology for production and implementation of projects.Having overseas experience for handling project activities.

A versatile, adaptable and confident person who has gathered a range of knowledge and skills through practical experience in a range of different sorts of jobs.

Deep knowledge of refinery process, engineering development and construction expertise. I have experience as Plant and Project engineer in the direct coordination of the execution of the work during start-up, commissioning and operation stage, control of contracts, administration and engineering.

MDT field specialist

Bachelor Degree & especial training in Plant Operation from Institute of Engineering & Technology (National Fertilizer Corporation) Pakistan

Worked in Honeywell Automation india Ltd as Engineer. Trained in Honeywell Automation India Ltd for DCS EXP R210,SCADA,PLC

Field Engineer , 2 years experience with Schlumberger Wireline.

I have 2 1/2 years experience in the pumping industry working as an acid and cement pumper operator and 4 1/2 years experience as an acid and cement supervisor. I am knowledgeable in acidizing primary and remedial cementing. I am looking forward to furthering my career internationally.

Diverse technical back ground including hydraulic power plant technician ,fresh water analyst, pump mechanic, maintenance coordinator, maintenance mechanic, and valve installation repair

Instrumentation

Ability to identify the client’s needs, to provide an intervention of quality, to encourage human development and to train junior consultants. The developement of my communication and natural leadership skills help me to innovate and to implement new ideas.

I attended German Malaysian Institute & Malaysia Komax Institute. Besides I attended Helicopter underwater Escape Training, Safety Survival Course for nature of work purposes.

Great Technical and problem solving skills

I am a Chemical Engineering graduate having 17+ years experience in the field of Safety, Occupational Health &Environment.

Mechanical design engineer (Prepare Design & Development plan for new product)Bachelor of Engineering (mechanical)

38 years old, Civil Chemical Engineer 4 years of experience in operational activities in Chemical Mining Industry, including leaching process management, SX and special chemical process.

LOOKING FOR JOB IN ANY POSITION

Prepare shift report to Shift Supervisor for the working activities based on data received from subordinates.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out