Resume - Senior Systems Analyst experienced in managing cross-functional projects with a ...

Misco Jobs

Resume #7285

CONTACT INFORMATION:
View contact information...

Senior Systems Analyst experienced in managing cross-functional projects with a high focus on customer satisfaction seeking a challenging position as a Project Engineer/ Manufacturing/ General Engineer.

* Led and assisted offshore-teams in developing and deploying LabVIEW software programs for data acquisition and control of test systems within the Cat Electronics business unit.
* Generated over $ 500,000 in new business opportunities as part of business development responsibilities.
* Swiftly built rapport based on customer trust through sincerity and product knowledge.
* Skilled analytical thinker, adept at hitting the ground running and delivering cheaper, better and faster solutions.
* Highly organized accompanied with superior communication skills and the ability to interact with individuals at all levels of the organization.

-MS in Industrial Engineering, West Virginia University, May 2001, financed 85% of tuition fee.
-Diploma in Information Systems and Management, Aptech Institute, 1998
-Bachelor of Engineering, cum laud, University of Mysore, Dec. 1998.

EXPERIENCE

- CATERPILLAR INC (Client); Satyam Computer Services Limited,
May 2001- Present

Project Engineer/ Systems Analyst, Oct. 2003- Present

* Currently developing "best practices" for maintaining a media management system and database for Caterpillar's online sales.
* Part of steering committee that is currently implementing a sophisticated search engine to enable online sales of Caterpillar's products.
* Publications consultant for an entire product group's PSK catalog.
* Worked with suppliers to develop business requirements for an e-commerce application to enhance hardware parts sales.

Senior Software Engineer/ Development Engineer, May 2001- Oct. 2002

* Speed Sensor Test System- Led the development of a Test System used to characterize speed and timing sensors and test them for their endurance. Developed software process model and translating process specifications into automation software requirements. Test parameters measured- signal amplitude, frequency output, phase-shift, pulse width of the signal at varying air gaps, temperature and speeds (RPM).Developed "best practices" for the complete life cycle of an instrumentation application.

* High Pressure Sensor Test System- Designed & developed a high accuracy test system (LabVIEW) to automate calibration of high precision, high-pressure analog, frequency and PWM sensors. Project completed well within budget and on time. Used MS Project, & Visio to accomplish cradle to grave planning and project cost tracking.

* ROPS- Developed a system to calculate the test force applied on a vehicle's cab and acquire stress data from the cab's structure in a highly dynamic environment. Conducted simulation testing for the functional fidelity of the displacement transducers.

* Pressure Switch Endurance Test System- Designed and developed a
Universal test system (LabVIEW) to monitor and control the test of high and low-pressure solenoids.

* Gear Roller Test Machine- Maintained system that provides interface to Allen Bradley PLCs which monitored and controlled nine gear roller (endurance) test machines.

- NATIONAL INSTITUTE OF OCCUPATIONAL SAFETY AND HEALTH (NIOSH) May2000-
Apr. 2001
Graduate Engineer, (Part time during MS program)
Led and assisted a cross-functional team in the design and development of a prototype dynamometer used to measure muscular forces in rodents.
Mechanical design and electrical drawings developed using AutoCAD 2000.
Data acquisition system built using NI products and software developed using NI's LabVIEW 5.5

- TRIVENI ENGINEERING INDUSTRIES LIMITED., Dec1998- July 1999
Trainee Engineer,
Assisted in System Integration and commissioning of a SCADA system in a gear manufacturing industry.

- L. G. B. ROLON, Oct. 1997- Oct. 1998
Project Associate, (Internship)
Designed an automatic locking mechanism that led to approximate savings of 22% of operating costs for a Rotary retort electrical furnace.

- Technical Skills: Industrial Automation (using LabVIEW, PLCs), AutoCAD (R14, R15, 2000& LT), MS Office, Lotus suite

(123, Notes), some Visual Basic & C, Windows 9x, 2000.

- Other: Project Management skills, strong organizational, and interpersonal skills.

**Open to international travel and/ or relocation.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 2685)

Go to Search Parameters...

Brief Description

Experienced in deep excavations for 20 years, specializing in sewer and water and installation of large diameter pipe, as well as Mass excavation and Heavy Highway work.

CA, CIA, CPA

Senior Instrumentation & Control and Telecom-SCADA Engineer

Water Survival, Safe Gulf, Trained in CPR and First Aid, Rigging Certifications

ITI in Instrument Mechanic, diploma in Electrical Engineering 5th Sem, working in Procter & Gamble Company

Instrumentation & Commissioning Analyzer Engineer

Innovative thinker with broad-based expertise in human resources, and business development.

Welding and electrical and management and mining class 32 hour certified fork lift operator

Free! DYNAMIC PROFESSIONAL - MASTER OF SCIENCE - CONSTRUCTION SAFETY COORDINATOR - PROJECT MANAGER -ADVANCED FIRST AID, SAFETY, & RESCUE

In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.

Hardworking, easy learner,..... Bachelor of engineering in instrumentation

Engineer, MWD, LWD

To secure a position in Environmental Health and Safety (EHS) Compliance with an established organization utilizing my 20 years of EHS skills, knowledge and experience.

20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.

I have a master degree in Chemistry and post graduates in International Law and Ecology. I have worked as an HSE specialist for more then 13 years.

Oracle Functional Consultant with over 10 years of experience in the Finance domain

I hold Higher National Diploma in chemical Engineering, from Kaduna Polytechnic. My skills are; water treatment processes, safe chemicals handling,process valve control, Pumps operations, safety (HSE), Chemicals preparation, Process monitoring, Instrumentation, Chemical cleaning, etc

Chemical Engineer with experience in proeudction and enigneering

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

A Process Instrumentation diploma holder with 14 + Years Experienced in MNC EPC and Client side as E&I Inspector, presently working in Maersk oil Qatar and deputed in india and oman. seeks suitable opening.

Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan

Operations Supervisor - Overseas experience

Environmental Consutlant/ Management - International Experience

I'm working in Pakistan PTA Plant (ICI). I have one year working experience.

Field Project Manager (Crosswell Seismic). Highly motivated, enthusiastic Borehole Seismic Project Manager with 11 years of wireline and seismic experience. Successfully managed numerous projects in diverse locations around the world.

I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial

Chemical/Process/Project/Field Engineer/Chemical/Process/Project/Field Engineer

HSE Specialist

Operations, coordinations, MIS, Advanced Excel, Customer service

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

Senior Instrumentation Specialist / Designer

Incharge for operation and maintenace of Diesel Generators and Aux. boilers. And also responsible for inventory and requistion management for these eqpts. In total i have 3 years of sailing exp. Presently sailed as 3rd engr. Recommended for promotion by senior engineers.

Working as Commissioning/project engineer in Kim Heng Shipbuilding & Engineering

been in oil field for 2 years, been in some type of managment for over 7 years

Project Planning, Scheduling and Forecasting, Progress measurement and reporting, Man-hour tracking and control, Project Control, Project and Maintenance Management/Planning/Scheduling. HND Computer Science, EMsc Project Management

SIR I am mechanical engineer,if my qualifation are suitable for any job please contact me.i can give good results and new method for doing any work.

Diverse experience in the fields of failure analyses, corrosion of steels, protective coatings and paint film systems, welding and materials selection, complemented by a strong background in mechanical engineering. Excellent communication and organization skills, dedicated to quality and accuracy wi

CCNA, CCVP ,C, C++, HTML, DHTML, ASP, JavaScript 1.2, Java 1-2, CGI-PERL, MS Office, MS Exchange Server, windows, Windows NT 4.0, windows 2000,2003,SQL Server, MS Access

Geologist

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

MSc Engineerign Geology, experienced in geotechnical engineering designs and SI

Senior Systems Analyst experienced in managing cross-functional projects with a high focus on customer satisfaction seeking a challenging position as a Project Engineer/ Manufacturing/ General Engineer.

As a compboss experiouns 5 years in pipeline contracting company

Strong communication and leadership attributes. Have led more than 20 commissioning/start-ups on chemicals plants in numerous countries.

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

Materials and logistics supervisor and controller.Warehouse and Inventory supervisor.

Rotating Equipment Engineer, Maintenance Engineer, Vibration Engineer, Reliability Engineer, Mechanical Engineer

Logistics, Technology, Transport and Management Professional

Over 10 years in the environmental industries with planning skills, I currently manage over 20 staff involved in a variety of projects focussing on land management, sustainable land use projects, visitor information, media liaison and implementation of national objectives for federal government.

6++ years experiences of Yokogawa & Honeywell DCS

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out