Resume - 11 + years in oil & gas sector, process & operation expert. Master of technology...

Misco Jobs

Resume #73763

CONTACT INFORMATION:
View contact information...

Objective
To aspire for a responsible, challenging and rewarding position

Professional Profile
* Fully Skilled Professional with 11+ years of industrial experience in the field of Process Design, Technical Service, Petroleum Refinery Operation, Emergency Handling, Up-gradation/Preparation of Operating/Turndown/Process Safety Procedures, Quality Control Management, Analysis by Hysis, HAZOP and Risk Assessment, Plant Troubleshooting, Energy Survey and Modifications for Performance Enhancement, etc. Presently working with BAPCO, Bahrain as a technical and operation assistance for hydro processing plant

Accomplishments
BAPCO, Bahrain
* Service from 21st Sept'2007 to till-to-date
* Operational and Technical assistance to improve plant performance & conservation of energy
* Review, update and maintain procedures & schedules for safe & trouble-free operation
* Analysis of Plant performance using PI Process Book and HYSIS
* Plant Troubleshooting and remedial actions to achieve on-specification products
* Assistance in day to day operations, i.e., chemical consumption, PPE, technical survey, etc.

Numaligarh Refinery Ltd
* Service from 7th Jan'1999 to 20th Sept'2007
* Full involvement in Project, Commissioning and Operation of Hydrogen and Hydrocracker Plant
* Review, update of Process Manual, PFD, P&ID, Emergency Procedure, Fire & Safety Regulations
* Preparation of punch list, expedite for early job execution
* Did many troubleshooting and modification jobs during plant start-up
* Gave many energy conservation ideas and helped in implementation thru MOC
* Helped in HAZOP study, Risk Evaluation and Remedial Action
* Trained field and panel operators about Plant Operation, Technical Know-how & Industrial safety
* Member of NRL Engineers technical forum
* Efficiency calculation of reactor, pump, compressor, heat exchanger, fractionators, heaters, etc.
* Preparation of daily reports, process capability, specific energy consumption, fuel loss, etc.
* Involved in commissioning activities of Utilities like ETP, Water Treatment, etc.
* Worked with Technical Service Department for around three years
* Full involvement in Revamp Project pre Evaluation and process calculation
Bureau of Energy Efficiency (Productivity Council, Chennai, India)
* Awarded with Certified Energy Manager in year 2005

BPCL (Bharat Petroleum Corporation Limited, Mumbai, India)
* Service from 4th Apr'2005 to 30th Sept'2005 in deputation
* Successfully commissioned of Hydrogen, Hydrocracker and Sulfur Recovery Plant
* Trained Operators, prepared operating manuals, reviewed P&ID & corrected ESD Logics
* Involved in activities like equipment commission, Heater dry-up, Catalyst Loading, Sulfiding, etc.
* Assisted in Equipment performance evaluation, guarantee test run etc.
* Handled many emergency situation

PDIL (Projects & Development India Limited, Noida, Delhi, India)
* Service from 7th Nov'1997 to 6th Jan'1999
* Development of PFD and P&ID, Cost Estimation, Uses of Codes & Standards, process design
* Technology Evaluation and Selection
* Familiarity with API, ASTM, ASME, NACE, BS Codes & Standards.

Expertise

Process Design
* Line Sizing Control & Relief valve Sizing
* Distillation Column Pump Hydraulics
* Heat Exchanger Calculations Use of simulation software
* Review of PFD & P&ID * Technology Evaluation & Selection

Technical Service
* Plant Troubleshooting * Analysis of Plant Performance
* Corrective & Remedial Course of Action * Daily Operational Activities
* Reactor conversion Calculation * Unit Material Balance
* Co-ordination with Vendor * Data Collection & System Survey for Energy
* MOC Evaluation and Implementation * Assistance for Operational Excellence
* HAZOP Study * Energy Conservation Drives & Schemes
* Revamp Study * Safely related survey and audits

Plant Operation
* Plant Commissioning * Preparation of Operating Procedures and Schedules
* Start-up/shut-down activities * Emergency Handling
* Permit System * Knowledge of DCS
* Quality Control Actions * Daily Operational Activities
* ESD & PLC knowledge * Familiar to Plant Safety Regulation & Standards
* Training to operator * Job notification and maintenance follow-up

Experiences
Process, Commissioning and Operational Experiences are highlighted here:

* During the project stage of Hydrocracker units the following problems faced which can provide lots of experience so that the mistakes are not to repeat in future projects, like
* Reactor internals, bubble caps developed cracks. Metallurgy problem
* Reactor feed pumps spillback control valves (Y-type) fixed in wrong directions.
* CHPS sour water line faced back pressure. Design problem.
* Underground CBD system crosslink with FCBD system.
* Hydrocracker GTR failed. Wrong feed analyzed in pilot plant study
* Low pressure nuts & studs were replaced due to inferior quality, project mistake
* Plenty of Leaks in high pressure line flow orifice flange spare plugs
* Frequent rod packing failure of Kobelco make make-up H2 compressor
* Failure of feed filter (German make) 3-way valves
* Sea water cooler (surface condenser) frequent fouling problem

* Some of the commissioning and operation bottlenecks & emergencies of hydrocracker, hydrogen plant (NRL, BPCL & BAPCO) experienced and learned are, like
* Fire in fractionators fin fan due to no reflux as the line choked with congealed VGO
* No reaction in 2nd stage reactor at SOR condition, design problem
* Rising temperature pattern in reactors from SOR
* Limitation in 2nd stage reactor furnace from the first start-up, design problem
* No flow in one of 2nd stage reactor feed pumps spillback Control Valve, unknown reason
* Frequent seal failure of Ebara make reactor feed pumps
* 2nd stage reactor bed DP high (2 times in 6 years)
* Fouling of naphtha vaporizer, difficulty in cleaning due to fixed tube sheet
* Frequent loader valves failure of wet off-gas compressor, condensate carry over
* Fouling of HP exchangers, HPNA build up due to full conversion, no bleed
* REAC fin fan fouling, external air side, rectified by chemical cleaning (detergent foam)
* Frequent failure of injection water pump, packing failure, loader valve/dampner damage
* No flow in one of reactor quench lines, Reverse welded, arrow marked wrongly
* RGC turbine low performance, hydrogen plant steam drum internal damage
* Too much hammering and leakage in LG condensate system, no insulation as per P&ID
*
* Technical support service to Hydrocracker unit in preparing material balance, fuel consumption, specific hydrogen consumption, evaluation of reaction conversion percentage parameters, like
* Process data collection for licenser
* Calculation of reactor conversion like, X (T*), X(RCP), PPC, Hydrogen partial pressure
* Determination of reactor ageing (fouling) and time to replace catalyst
* Calculation of specific energy consumption of process unit, production cost
* Calculation of fuel consumption & oil loss
* Material balance calculation of process units

* Some useful process modifications as per MOC which led to considerable energy saving, like
* Step-less loading system (Hydrocom) of make-up compressor
* Replace warm-up (UCO) of 1st stg feed pump by filtered feed to improve capacity utilization
* Install 3rd injection water pump to avoid NH3 by running two pumps on continuous basis
* Diversion of UCO to diesel product
* Interconnection of Dedicated HSD oil to normal HSD route in unit limit to have CV facility
* Full utilization of HPRT(High Pressure Recovery Turbine)
* CLPS gas KOD (knock out drum) to facilitate condensate separation
* Off-gas comp and CLPS line drain to flare as a safety measure, eliminates H2S hazard
* Waste heat recovery of heaters, generation & superheating of 110 psig steam
* Insulation & tracing of Khuff gas (Fuel Gas) line to heaters to improve efficiency
* Insulation & tracing of HVGO line from tankage to HCU unit limit to conserve heat
* One spare naphtha vaporizer (HE) kept to avoid down time
* Recovery of H2 from refinery fuel gas which is around 30% rich in H2
* Flare gas treatment and recovery of fuel gas

* Some Troubleshooting activities needs to be highlighted for future reference and knowledge, like
* 2nd stage reactor conversion problem, high NH3 in recycle gas
* Low kerosene smoke point, high aromatic feed to 2nd stage, high CAT
* Condensate carry over with sour gas to SRU, no individual flaring provision during upset
* Condensate carry over with CLPS off gas to PSA, no KOD, no dedicated PSA

* Some of process analysis done using simulation software are following,
* CLPS section study for determining scope for maximizing production of LPG
* Fluid properties and its depressurization study.
* Crosschecking equipment and process parameters with respect to design calculations.

* Some workouts relevant to process design
* Familiar with codes & standards required start process design
* Line sizing, pressure drop & velocity limitation
* Pump hydraulic Power, NPSH, head, shutoff head and BEP calculation.
* Heat Exchanger Pressure drop and heat duty calculation
* Control valve and Relief Valve design.
* HPRT – Head, Horsepower
* Compressor- Polytrophic and Adiabatic head, Horsepower, Efficiency

* Assistance to technical service for gathering data to study the viability of modifications or revamps
* Use of exaquantum & log books for DCS data and laboratory test results
* Bottlenecks to be faced to implement a new system, some trial run methods
* Calculations and analysis relevant for production of Euro-diesel
* Hydrocracker revamp for capacity augmentation to treat straight-run diesel
* Study for Reactor catalyst replacement and sulfiding

Computer skill

* Process simulation software: Hysys
* Engineering application user end: SAP, DCS Data acquisition software exaquantum, PI Process
* Application: Microsoft office, Internet Access and WEB Browsing,
* Platforms: Windows 98/2000/XP/Windows Vista
* Programming Language: FORTRAN, Dbase, C++, Visual Basic etc.

Education

* University of Calcutta
M. Tech., Chemical Engineering, Specialization-Petrochemicals & Petroleum refinery Engineering, 1997, First Class, 75%, University College of Science & Technology, Calcutta
* University of Sambalpur
B. E. in Chemical Engineering, 1993, First Class, 60%, Regional Engineering College, Rourkela
Total 61 days vocational training Refinery and Steel Company (Fertilizer Section)
GATE qualified for getting sponsorship for Master of Technology Course
* Assam Higher Secondary Education Council
Higher secondary, 1988, Second Class, 58%, Cotton College, Guwahati, Assam
* Board of Secondary Education, Assam
High School Leaving Certificate, 1986, First division, 76%, Higher secondary School, sarupathar

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 2461)

Go to Search Parameters...

Brief Description

Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.

Wide experience in oil/gas exploration (off-shore, land, in-house, in the field, & onboard) *12 Yrs.*. INTERESTED: posts with responsibility, challenges, that utilise my skills and expertise, like: marketing, HR, recruitment, client rep, managerial (exploration /E&P),..**This list is NOT exclusive.

I am working in Power Plant from last 12 Years as a Instrument and Control Technician.

Plant Operator

Rover operator

BTS EXPLIOTATION OF PETROLEUM .ALGERIAN OF PETROLEUM INSTITUTE.

About 5+ years’ extensive training and experience in Oil and Gas Refinery Environment on the field of Safety and Operations including LPG Facility.

B.E, (Mechanical Engineering),April 1994, University of Madras. Diploma in Computer Applications. 14 Years in Oil / Gas fields - SR.PRODUCTION OPERATOR

Senior Cased Hole Wireline Engineer

Chemcial Engineer With +12 Years experince

Materials Coordinator

QC / WELDING INSPECTOR (STRUCTURAL)

I have 12 years of experience in oil and gas field operations. I've handled various responsibilities from exploration stage of field to upgradation of production to 65000 BOPD. Attached below is resume.

Over the past 14 years in the oil industry i have worked from ground up on drilling rigs. roustabout , floorhand ,motorman , derrickhand , driller , and my past employment for the past 4 years has been operations superintendent with duties pertaining to drilling ,workover and production.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitoring. I have a bachelors degree in mechanical engineering

Above 12 years experience in the process Industry. Conversant with software packages like windows, Hextran, PI, Lims, Simulator and BAAN. Worked in various capacities in the operation of Petrochemical operation. Loading, Sulfiding and technical support to refinery unit operations

8 yrs.exp in the commissioning and operation of gasturbines, boilers & all other utilities in a big power plant and fertlisers company

14 years of experience in managing all phases of Operations, including purchasing, inventory control, transportation, budget preparation and execution, staff development and regulatory compliance. Experience held in manufacturing, Oil/Gas, transportation and chemical industries.

Senior Drilling Engineer & Supervisor

11 + years in oil & gas sector, process & operation expert. Master of technology in chem engg

WSS,WSE,WSI, experience on remote,land, desert, harsh environments. Experienced in exploration, oil,gas, appraisal, horizontal well drilling, Experience on all mud types,fishing, sidetracks, well control. Managed many multinational operations. Mentoring junior engineers. Strong QHSE commitment.

I am a Chemical Engineer working in petrochemical co. at Saudi Arabia.

Offshore and onshore experienced engineer looking job in oil and gas field

Oil and Gas Professional with expertise in Operations and Finance developed over a seventeen year period in foreign countries

Highly competent, experienced HSE professional seeks overseas project

looking for Directional Driller or MWD Operator Job

Process operator/technician. Had experience and knowledge in process operation, both in petrochemical and oleochemical industries

Port Captain

Excellent geosteering experience for horizontalizontal, deviatedated vertical wells. Excellent userof PASON, Mudware, TVD, Ozi Explorer and Ryon Directional - Wintrak systems. Have passion of learning and swiftly using new computer applications and technology. I am willing to travel.

Drilling engineer, Drilling supervisor, Mud and Cement supervisor and Mud and Cement engineer

Chemical plant operator, 17 years experience, 4 years as plant controller.

Area Maintenance Static Supervisor

Over twenty-six years experience in the Oil Industry. The last sixteen years involved in pre-commissioning, commissioning, startup, and continuous operation

*17 Years In Methanol/Ammonia Production *Control Room Operator (DCS/PLC) *Supervisory Experience *Computer Literacy *First Response/Firefighting Experience *Safety Committee Member *Training Of Junior Personnel *Startup/Commissioning Experience

Information Manager with over 20 years experience in Oil & Gas engineering

Total 4+ years experience in chemical, Petrochemical, Specialty chemical, involving duties such as smooth running of the plant preparing daily/monthly report, achieve the production target, Yield and improving Quality with in safety ,ISO 9001-2000 Standards

Experience in HPHT well completion, Single Trip Multizone Gravel Pack, Expandable Sand Screen completion, well testing, slickline

I have worked in the oil & gas drilling industry for over 19 years and possess a unique blend of experience and knowledge of how the industry works.

Respected sir, I am NCVT 3 year technical exam passed in plant operation & minor maintenance. Presently I am working in Reliance Refinery Jamnagar, India, in FCC complex and taking charge in propylene recovery unit and shp-tame unit.

Carrying out surveys of plant & buildings in relation to existing or proposed instrumentation and controls. Writing of reports.

Bachelors of Mechanical Engineering (89%, A+) (2003-2007)

Senior Cement Supervisor cross-trained in Acid and Fracturing Stimulation. More than 11 years experience in the well service industry, combining strong supervisor skills with a mechanical background to positively contribute to the company’s excellence in Well Service. Proven history in improving o

Familiar in process control operation with Honeywell TDC-300DCS and Fox Pro. System.Can operate all plant auxillaries and utilities.Can do mechhanical trobleshooting/repair of all plant equipments.

QC-Inspector-(Welding)

Well Site Drilling/ field & HSE Engineer

DATTARAM Scholarship for highest aggregate marks in Geology during three years graduation.

20+years wide variety of experience willing to work anywhere

I have 27 + years experience in Oil/Gas/Power Generation & as On Job Trainer

OIL AND GAS OFFSHORE OPERATION and PRODUCTION SUPERIVISOR/SUPERINTENDENT

Operations, Drilling and workover technical, 26 Years experience in oil and gas industry, experience work in the jungle and some off shore.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out