Resume - AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (...

Misco Jobs

Resume #74152

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION:
Nationality: Nigerian
Birth date: 1st October, 1980
Gender: Male
Marital Status: Single

CAREER OBJECTIVE:
Seeking job opportunity in the field where my educational background and training will be put to practice and further development, and also to become a professional in a professionally managed organization, which can provide challenging assignments.

WORK EXPERIENCE:
October 2006 to August 2007
AJAOKUTA STEEL COMPANY LIMITED
Kogi State, Nigeria
Engineer, NYSC

Oxygen Plant Rehabilitation.
Monitoring of heater for regeneration of Silica gel
Filling of regenerators with Basalt stones
Production of pearlite for cold box.
Replacement of gaskets, carrying out of leakage test on flanges, cleaning and washing of oil filters for compressors.
Cleaning and Sand blasting of vessels for the storage of oxygen.
Changing of electric motors for the valves.
Changing of worn out bolts and nuts from the pipes and changing of lubricating oils in gear box.
General repair works.

July 2004 to December 2004
GEMINI PHARMACEUTICALS NIGERIA LIMITED
Lagos State, Nigeria
Industrial Trainee

Microbial Analysis of raw and finished products in accordance to NAFDAC standards.
Production of Tablets and creams (nifegem, sabresten,ciprogem)
Demineralization of water for production of drugs.

EDUCATION:
2000 to 2005
ENUGU STATE UNIVERSITY OF SCIENCE AND TECHNOLOGY
Enugu State, Nigeria
Degree: Bachelors in Engineering
Major: Chemical Engineer
Second Class Honors-Upper Division

TRAINING:
MAY 2008 EL-DEMUZ GLOBAL CONCEPT
ASPEN – HYSYS (proficiency in Chemical Process modeling and simulation)
OIL CHARACTERIZATION
PROPANE LOOP REFRIGERATION
REFRIGERATED GAS PLANT
GAS GATHERING
TWO STAGE COMPRESSION
NGL FRACTIONATION TRAIN
ACID GAS SWEETENING WITH DEA
NATURAL GAS DEHYDRATION WITH TEG
REPORTING IN HYSYS
GENERAL APPROACH ON REVAMP PROJECT IN HYSYS.

JUNE 2008 SHELL PETROLEUM DEVELOPMENT COMPANY & NIGERIA INSTITUTE OF
SAFETY PROFESSIONALS
HEALTH, SAFETY AND ENVIRONMENT (HSE) COMPETENCE TRAINING FOR FOREMEN, PLANT OPERATORS AND ENGINEERS.

UNDERGRADUATE PROJECT/DESIGN:
Beneficiation of Agbaja (Kogi State) iron ore (Undergraduate project)

A design of a plant to produce 17x 103 tonnes of concentrated nitric acid per annum for military use. (Undergraduate design)
COMPUTER SKILLS:
MATLAB
AutoCAD
Microsoft office
PROFESSIONAL MEMBERSHIP: S.P.E (Society of Petroleum Engineers) NO: 3149944
SCHOLARSHIP:
Federal Government Scholarship on CGPA
INTERESTS:
Reading motivational novels, playing and watching football.

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 2461)

Go to Search Parameters...

Brief Description

I am skilled in providing/developing HSE advice, HSE policies, accident/incident investigations, safety inspections, HSE training, Risk Assessments, emergency response/ evacuation procedures. I have obtained the National NEBOSH Certification in UK and the NISP - HSE certification in Nigeria

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Management, business, trading, oil and gas, adminstration, HR, petrolium

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

I'm a well service / well intervention Supervisor

Open Crane Operator and Advanced Rigger

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

analyst

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Worked in chemical Industry for 14 years.

P&PCM, MBA, B.Arch

I am qualified as an operator for monitoring pressure, flow, temperature, gas, and liquid pipeline operations including pipeline, wells, refineries, and plants.

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

Operations Supervisor

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

10 Years Working As A Cartographer For QARUN Petroleum Company

Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Electration Engineer Trainee

Contract Administrator, Paralegal-PC/Microsoft Proficient

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

A dynamic professional with over 10 year of experience in Project Planning, Cost Control, Estimation, Quantity Surveying, Co-ordination and execution of MEI&P Projects. Proficient in Primavera Project Planner V3.1 & 6.0, Office XP/2000 and In-house soft wares for Client / Sub-contractor Billing

Electrical Engineer

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

For the last five years I have been employed as a Research Technologist in a hydrocarbon laboratory. My background encompasses oil and gas analysis, FDA & cGMP quality control, as well as other types of analysis.

Bachelor degree in Economics(First Class Honours), Associate of the Institute of Certified Cost Management of Nigeria, Associate of the Institute of Certified Economists of Nigeria, National Diploma in Statistics(Distinction)

Desired employment / Occupational field Financial & Economic / Project Analyst

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

20 + Years Experienced Heavy Equipment Operator / Haul-Truck Driver Supervisor to Relocate Anywhere. I desire to work for a well established yet growing company.

I am a young energetic Mechanical Engineer with hands-on experience in Upstream Oil and Gas industries and Masters degree in Project Management from National University of Singapore. I came to Singapore to gain the best of knowledge of the industry and the field exposure so as to increase my profess

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Bachelor’s Degree in Mining Engineering, Faculty: Petroleum Geology and Geophysics, and Chicago Oakton Community College Faculty: Computer Science.

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

I am a holder of first class honours in Mining Engineering from UMat, Ghana,. Knowledgeable in the Microsoft Office Suite (Microsoft Word, Excel, PowerPoint, Access). I am also familiar with some General Mining Packages such as; SURPAC AutoCAD, and WHITTLE. I am a fast learner with the zeal to learn

Field sales representative collection/ credit investigation drafting edge

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out