Resume - Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Managemen...

Misco Jobs

Resume #74620

CONTACT INFORMATION:
View contact information...

SUMMARY: My experience covers in excess of ten years in the offshore energy industry, both domestic and international. I have held positions as Project Coordinator, Service Representative, Team Leader, Senior Technician, and Shop Technician/Machinist.

EDUCATION: Weatherford Junior College, PC Basic Programming, 1990
Texas State Technical College, A/C and Refrigeration Technology, 1991

PROFESSIONAL
EXPERIENCE:

2006 - 2008 TWACHTMAN SNYDER & BYRD, INC., HOUSTON, TEXAS
Project Coordinator - Responsibilities included providing project management for decommissioning of platforms in the Gulf of Mexico, project support and coordination among all departments of the Corporate Office, Louisiana based personnel, appointed Subcontractors / Vendors for all operations, collecting well and pipeline data, and assisting in the development of P&A procedures.

2002 - 2006 VALKYRIE COMMISSIONING SERVICES, INC., / WEATHERFORD
INTERNATIONAL INC. HOUSTON, TEXAS
Service Representative – Supervised a team of 5 to 15, as well as assisted in offshore and onshore projects specializing in pipeline preparation such as cleaning, hydrostatic testing, flooding, gauging, leak testing, etc. Additional duties included creating and submitting daily project an operational reports covering personnel performance, project status, and cost control. I functioned as on-site HR coordinator conducting quarterly and annual performance evaluations on all team members. HSE duties included insuring that all team members adhered to all applicable safety regulation as dictated by corporate management, as well as other agencies such as MMS and USCG.

1999 - 2002 TYCO VALVES AND CONTROLS, STAFFORD, TEXAS
Assembler / Machinist - Disassembled, cleaned, inspected, reassembled and tested valves by utilizing complex component maintenance manuals and blueprints. I worked with the Training and QA departments in training new personnel and development of bi-annual quality assurance audits. Coordinated with the Engineering Department in the development of new high precision valves and controls and interfaced with management and clients to insure that such projects were completed within the required time line.

1996 – 1999 FMC CORPORATION, STEPHENVILLE, TEXAS
Technician / Machinist – Worked closely with the QA department to assure that new valves were properly assembled and tested. When FMC divested the Crosby and Omni valve product line, I coordinated with the shop management staff to insure a smooth transition from FMC to TYCO Valves and Controls.

Project History and References on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 2461)

Go to Search Parameters...

Brief Description

I am skilled in providing/developing HSE advice, HSE policies, accident/incident investigations, safety inspections, HSE training, Risk Assessments, emergency response/ evacuation procedures. I have obtained the National NEBOSH Certification in UK and the NISP - HSE certification in Nigeria

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Management, business, trading, oil and gas, adminstration, HR, petrolium

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

I'm a well service / well intervention Supervisor

Open Crane Operator and Advanced Rigger

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

analyst

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Worked in chemical Industry for 14 years.

P&PCM, MBA, B.Arch

I am qualified as an operator for monitoring pressure, flow, temperature, gas, and liquid pipeline operations including pipeline, wells, refineries, and plants.

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

Operations Supervisor

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

10 Years Working As A Cartographer For QARUN Petroleum Company

Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Electration Engineer Trainee

Contract Administrator, Paralegal-PC/Microsoft Proficient

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

A dynamic professional with over 10 year of experience in Project Planning, Cost Control, Estimation, Quantity Surveying, Co-ordination and execution of MEI&P Projects. Proficient in Primavera Project Planner V3.1 & 6.0, Office XP/2000 and In-house soft wares for Client / Sub-contractor Billing

Electrical Engineer

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

For the last five years I have been employed as a Research Technologist in a hydrocarbon laboratory. My background encompasses oil and gas analysis, FDA & cGMP quality control, as well as other types of analysis.

Bachelor degree in Economics(First Class Honours), Associate of the Institute of Certified Cost Management of Nigeria, Associate of the Institute of Certified Economists of Nigeria, National Diploma in Statistics(Distinction)

Desired employment / Occupational field Financial & Economic / Project Analyst

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

20 + Years Experienced Heavy Equipment Operator / Haul-Truck Driver Supervisor to Relocate Anywhere. I desire to work for a well established yet growing company.

I am a young energetic Mechanical Engineer with hands-on experience in Upstream Oil and Gas industries and Masters degree in Project Management from National University of Singapore. I came to Singapore to gain the best of knowledge of the industry and the field exposure so as to increase my profess

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Bachelor’s Degree in Mining Engineering, Faculty: Petroleum Geology and Geophysics, and Chicago Oakton Community College Faculty: Computer Science.

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

I am a holder of first class honours in Mining Engineering from UMat, Ghana,. Knowledgeable in the Microsoft Office Suite (Microsoft Word, Excel, PowerPoint, Access). I am also familiar with some General Mining Packages such as; SURPAC AutoCAD, and WHITTLE. I am a fast learner with the zeal to learn

Field sales representative collection/ credit investigation drafting edge

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out