Resume - Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engi...

Misco Jobs

Resume #77423

CONTACT INFORMATION:
View contact information...

Personal Data

Date of Birth: 23-10-1985
Age: 24
Sex: Male
Nationality: Indian
Marital Status: Single

Holder of valid UAE (GCC), Indian Driving License.

Holder of Valid Indian Passport ¡V valid till 2014.

Fluent Languages

English, Hindi and Malayalam
Language Comfortable

Tamil
AMBU THOMAS
PROFESSIONAL QUALIFICATION:(INSTRUMENTATION ENGINEER)
„« B-Tech in Electronics and Instrumentation (Instrumentation Engineering) from Federal Institute of Science And Technology (FISAT), Mahatma Gandhi University,Kerala,INDIA (June 2007).
„« Distributed Control System (DCS) and Programmable Logic Controllers (PLC) Certified training from YOKOGAWA India Ltd.
PRESENT STATUS & EXPERIENCE( 1 Year ):
„« Working as a Junior Engineer at Abu Dhabi Oilfield Services (ADOS)-Abu Dhabi, UAE in FARRIS Safety Relief Valve, FISHER Control Valves, Spares & Regulators division.
„« Worked as a Trainee Instrumentation Engineer at Fertilizers And Chemicals Travancore Ltd.(FACT) Kerala-INDIA, during Shut Down period in Petrochemical Division.
NATURE OF WORK:
Working as a Junior Engineer, my responsibilities are
„« Sizing Calculation & Selection of Relief valves, Control valves & Regulators.
„« Provide technical guidance, Clarification for technical quires, advice design changes for construction, commissioning, operation, review of P&ID, engineering for oil & gas production and EPC facilities.
„« Preparation of Data Sheet as per specification and Standards for Valves, Detailed instrument design on valves, Bill of material, GA Drawings, Recommended Spare parts list, ITP (QA/QC) and various check lists.
„« To carry out inspection at various stages of FAT. These stage include various functional test, Pop test, Hydro test, Seat leak test. etc.
„« Preparation of Technical & Commercial bid for evaluation.
„« Knowledge in international standards & recommended practice used in Oil & Gas industry.
„« Knowledge in DCS, PLC, P&ID diagram, Instrument diagram, Trouble shooting of control valve.

Worked as Trainee Instrumentation Engineer for a period of 6 months in FACT (Petro Chemical Division) during Shutdown Period.
* Responsible for all control and Instrument System Maintenance activities like troubleshooting, calibration testing and effective utilization of material in day to day preventive Maintenance and shutdown Maintenance etc for ensuring continuous reliable and efficient operation of all control and instrument system in the plant. Scheduling and execution of daily and monthly plant calibration and inspection of different instruments.

Achievements
„X Best performance in ADOS.
„X Won prizes in district level.
„X Best Football player in the year 2002.
„X Member of football team in school and college.
„X Representative in School and College.

Hobbies

„X Riding
„X Music listening
„X People Networking

EDUCATIONAL QUALIFICATION:
* Bachelor Degree in Electronics & Instrumentation Engineering (2003-2007) from Federal institute of science & Technology affiliated by Mahatma Gandhi University with 66%.
* Intermediate (Plus 2) in science from Nava Nirman Public School (CBSE) with 64%.
* SSLC (10th) from Mary Matha School (State Board) with 74%.
OBJECTIVE:
To be associated with a progressive organization that gives scope to learn and constantly improve my knowledge and skills, and to be the part of a team that dynamically works towards the growth of the organization
PROFILE:
„« Enough energy & poise to carry large work load consistently.
„« Good inter personal communication skills.
„« Comprehensive problem solving abilities.
„« Ability to adapt to changes.
COMPUTER LITERACY:
„« Working knowledge in
* Windows 98, Windows XP
* MS Office and other related software
* Programming in C,C++
TECHNICAL TOOLS:
„« Lab view
„« Matlab
„« DCS(CENTUM 3000/1000)
„« PLC

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 2685)

Go to Search Parameters...

Brief Description

I am a GRADUATE MECHANICAL & CERTIFIED COST ENGINEER possessing 20 years of diversified experience in Petrochemicals, Refining, Chemical, Fertilizer, Oil & Gas with various multinational companies in Pakistan, Bahrain & Saudi Arabia in the fields of Project control, Cost & Contract Management, Plant

I have worked as a Tour push onshore Venezuela and as a driller offshore Qatar. I am now working as a drilling consultant here in Canada.

Administration , Accounting and Human Resource experience

Young Reservoir Engineer with 4+ years of experience. Areas of expertise include: PTA, reservoir simulation, waterflood management, sand management, naturally fractured reservoirs, calssical RE methods, etc.

Steel Worker, Machinest, Inspector,Hardworker

PIPE DESIGNER, More than twenty-five years experience in Technical drafting, piping and equipment hands on field work in the Chemical Manufacturing environment.

Skillful in instrument field devices like transmitters & positioners & control valves & switches speed and vibration sensor.

Logistics and Supply Chain Management, Well, organized, Good Communications, P/L and Budgets, Remote Site setup and management, Warehousing, Maintenance, Procurement and subcontracts, Transportation, Multi-cultural environments, Management of multi-locations.

PhD chemical engineering, 15 years experience as operations and academic teaching

Derrickman with Strong Petroleum Engineering education background.

I am a high technician in gas exploitation (plant operator), I am working now for BP in Algeria at in salah gas. I will accept all regions.

Offshore Field Engineer Pipeline Electrical Automation Mechanical

I have been in the oil and gas industries for 13 years doing project coordinations and managing maintenance of equipments

Free! A young resilient Mechanical Field Engineer with the drive to undertake challenges and a Expertise in Supervising safety,mechanical maintenance,including pumps and turbines,spares and material control as well as managing projects

Experienced Equipment and Packaging Field Service Technician seeking a position in Technical, Mechanical, or Packaging Field.

Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills

PhD Offshore Dev.: Currently in Houston, TX helping in upstream equipment procurement; experiences with Oil Services Co. and in research/teaching petroleum engrg courses; had done reservoir/well modeling; fluent in English/Russian; available as an intl. Marine Surveyor (Inspector) trainee staff

Warehouse exp looking for a change

Undergone training in Industrial Automation using PLC & SCADA

Heavy Lift Manager

2D / 3D Design Consultant, 13 years Oil & Gas Experience starting with 4 year mechanical apprenticeship. Having worked in Aberdeen, Scotland and Oslo, Norway on surface and subsea production equipment (EDP, LRP, BOP, Xmas Trees, etc).

Total working experience 06 years. DCS operator with 06 years of diversified experience in the field of petroleum refining industry. Have been performing shift duties at Attock Oil Refinery, at Naphtha hydrotreator & Catalytic Reforming unit as Control Room Operator. Well versed with the

I am seeking a position in the field of Environmental clean-up. I would be an asset to your company because of the fact that I am a dedicated individual and recently obtained my bachelors degree in Management from the Indiana University School of Public and Environmental Affairs.

6 years experience of Project Management & Execution, Construction Supervision & Quality Surveillance in the Field of Power, Oil & Gas – Pipe Lines with confident communication and Planning Skills.

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Onshore oil gas pipeline construction, coating, testing, commissioning and start–up; pigging / intelligent (in – line) inspection; pipeline maintenance / maintenance management; good knowledge related to pipeline detail design, route selection, alignment sheets and relevant international standards

Understanding regulatory information, Organized, Efficient

Honour degree holder, project management, project manager, ship repair manager, singapore shipyard

Project Management/Operations

Gas turbine performance, turbomachinery design, CFD, CFX, MS Excel, AutoCAD 2007, MATLAB, Unigraphics, UNIX, LINUX, Gas turbine simulation and diagnostics, Aerodynamics of compressors

WellSite Supervisor

Experienced process control professional skilled in both Onshore and Offshore Oil/Gas operations. Worked in the UK and overseas. A versatile team player with excellent organisational and interpersonal skills. Proven record in Construction, Commissioning and Start up projects.

Warehouse/Supply Management,/Logistics co-ordination and purchasing skills.

OBJECTIVE Seeking career opportunities in challenging environment of the upstream sector of oil and gas industry, where my skills and result oriented analytical approach can be utilized effectively for organizational profitability and personal growth.

Work experience Education Additional information Skills Abilities Hobbies

I am working with Engro Chemical Pakistan Ltd., since start of 1999, as a Chemical Plant Operator at Urea Unit, and wish to join else where in the world.

Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engineering or Operation side job

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.

Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.

Five years increasing responsibility and leadership in Power Plant, Analytical Chemistry, Mechanical Operations and Maintenance. Expert in the fields of Water Sampling , Maintenance Planning, and Record Audits

ROV Pilot Training, BOSIET, HUET. Offshore Medicals, STCW 95

Machinist,C.N.C. / Manual 20+yrs. experience

Chemical Engineer, Project and Quality-Security-Environmental Management

Bachelor of Chemical Engineering and Bachelor of Geology degrees, over 10 years field experience in the oil /gas industry around the world. Worked offshore and onshore. Valid IADC Supervisors Wellcap certificate. Vaild OPITO offshore card.

I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

All aspects of mineral processing plant construction

3 yrs Oil and gas production operator

Safety Management Diploma, Health and Safety at Work Certificate,Medic,Aviation,Military

High - educated, experienced construction engineer. 10 years construction experience in civil building, high voltage electric lines, substations. Company management, team management, consulting.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out