Resume - Carrying out surveys of plant & buildings in relation to existing or proposed in...

Misco Jobs

Resume #77867

CONTACT INFORMATION:
View contact information...

Qualification:
Degree in Instrumentation and Control,
University of Bucharest, 1986
Industrial High School of Automatics, 1979
Personal skills:
* Self reliant, reliable self starter
* Team worker with good Supervisory skills
* IT skills – Word, Excel, etc.
* Pre-commissioning, Commissioning and Start-up
* Maintenance planning
* QA / QC activity
* Experience in risk and hazard analysis

Instrumentation experience:

* Circa 30 years work experience (10 years Middle-East / Africa)
* I & C Engineer – Oil and Gas Industry
* Field experience in construction & commissioning
* Installation of all instruments & control equipment
* DCS, PLC- System installation
* Configuration and loop test
* Plant Maintenance Supervisor / Engineer
* Wide knowledge of process instrumentation and control
* Supervision of I & C subcontractors

Nov.2006- at present

Company: AMEC UK
Location: Libya
Position: Instrument Engineer - working for the Client Zueitina Oil Co.

Responsibilities:
Overall construction – installation activities and commissioning support of the following Zueitina projects:
* Fire Protection and Alarm System at 103D
* Instrument Upgrade- New Control System for Gas Injection Train 3 & 4 at 103D
* Instrument Upgrade- New Control System for Compressor 23K6 at 103D
* Siemens Gas Turbine – New Power Pack 2 units at 103A
* Siemens Gas Turbine – New Power Pack 2 units at 103D

My duties include:

* Carrying out surveys of plant & buildings in relation to existing or proposed instrumentation and controls. Writing of reports.
* Liaison with Operations & Maintenance staff, as per Construction Manager instructions.
* Checking of project related drawings & documents for compliance with site requirements.
* Inspection of project materials, including impulse piping, cables, enclosures, and all related fixings, labels, brackets, frames, terminations, etc. which have been supplied by Contractors or directly purchased by the Company. Inspection of storage conditions for materials.
* Following the construction works on site, and checking status reports and progress reports which the Contractors have prepared. Inspecting the finished works and advising the Construction Supervisor of any instrument related problems, and of possible techniques for resolving these problems. Testing and Calibration equipment and procedures.
* Familiarisation and compliance with Company rules and procedures.

May 2006- Oct.2006

Company: JGC Middle East FZE
Project: Dolphin Onshore Facilities Project Ras Laffan Industrial City, Qatar
Position: QA / QC Instrument Inspector
Responsibilities:
* Reviewing of all ITP's/QCP/Method Statement/ Material Approval prior to project plan preparation.
* Coordinating project plan with Construction Supervisor. Review of AFC drawings.
* Weekly meeting concerning the activities scheduled as per the project plan, and the resources (man / materials / equipment) required to carry these out.
* Assigned to Review all Subcontractor Technical Documentation prior to circulation or submission to Client.
* Ensuring instrument works complied with project specifications, company procedures, method statements and quality assurance and control documentation (strictly implementing the ISO 2000 and ISO 9000).
* Supervising and monitoring the inspection on-site and calibration, to meet project deadlines.
* Monitoring all subcontractor activity prior to start of Instrumentation Workload.
* Scrutinized every area to be inspected prior to RFI by the main Client.
* Witnessing repair and calibration of instrumentation, and commissioning of the following equipment: Smart Flow, pressure, temperature, level transmitters, different control valves, pressure gauges and Fire & Gas alarms.
* Analogue and digital controllers Fire&Gas detection/protection systems,
* ESD (Emergency shutdown), Pneumatic and hydraulic shutdown panels and control systems.
* Project Duties included review of loop folders for final acceptance by the QA/QC Dept. before transferring to Commissioning.
* Inspection of vendor skids before final acceptance by client.
* On-site audits of subcontractor.
* Following all safety practices and procedures and correcting of unsafe work practices
* Fully conversant with relevant International (ANSI, ASTM, API, BSI, IP, ISO, IEC, IEEE, SPs / ERDs and DEPs), etc. standards.

Oct. 2005 – February 2006

Company: JAPAN GAS CORPORATION (J.G.C)
Location: SOHAR REFINERY COMPANY / SOHAR - SULTANATE OF OMAN
Position: Instrument engineer
Coordination of Instrument Punch List between sub-contractor and Client. Also coordination between sub-contractor regarding the Inspection and Test Reports documentation related to instrumentation.

April 2005 – September 2005
Project - Bu Hasa facilities Development Project, Abu Dhabi –UAE
Company - Abu Dhabi Company for Onshore Oil Operations
Contractor - Snamprogetti, Italy
Client - ADCO
Position -Instrument /Automation engineer
Supervising and coordination of engineering, construction, pre-commissioning activities for instrumentation.

July 2004 - March 2005

KINGDOM SAUDI ARABIA-Aramco-Berri gas plant-
Position - I & C Engineer
- Construction, pre-commissioning, commissioning and maintenance during start-up.

October 2003 – June 2004
SIRTE OIL COMPANY- LIBYA- Attahaddy gas field
Instrument engineer – Commissioning and start-up team –DCS-ABB 2000.

May 2002 – April 2003
TSKJ BONNY ISLAND (NIGERIA LTD)
Instrument supervisor. Construction and installation of instrument and electrical equipment – switchgear and MMCI, pre-commissioning and commissioning, loop check of different types of instruments, and corrective action. DCS systems-FOXBORO, PLC, and SCADA. Maintenance during Pre-start-up activities (operational Tests) and normal operation.

February 2002 – May 2002
QATAR PETROLEUM – NGL 4 PROJECT DUKHAN.
Instrument supervisor
Employee of SNAMPROGETTI for pre-commissioning, commissioning and start up of GTG Nuovo Pignone; MARK -V; DCS systems –HONEYWELL, TDC 3000.

August 2001 – February 2002
TSKJ BONNY ISLAND (NIGERIA LTD)
Instrument supervisor. Construction and installation of instrument and electrical equipment – switchgear and MMCI, pre-commissioning and commissioning, loop check of different types of instruments and correction, DCS systems.-FOXBORO.

May 2000 – August 2001
ASTRA Refinery, Ploiesti, Romania
Instrument dispatcher responsible for coordination of maintenance activities at the Refinery.

May 1999 – May 2000
CHROME CONSORTIUM, PORT HARCOURT REFINERY, NIGERIA
Instrument supervisor
Directly involved in the specific works of Turn Around Maintenance and Rehabilitation Project. Performing maintenance works on instrument and control equipment, including metering devices, automatic valves, safety devices, fire detection. Detailed daily reports and analysis on the maintenance works executed, following up the observance of workplace safety regulations, working in close collaboration with other skilled personnel: mechanical, electrical and operation staff. Proposing improvement on maintenance modification, recommending materials and tools and actions required for proper execution of the instrumentation duties.

April 1998 – April 1999
ASTRA Refinery, Ploiesti, Romania
Instrument dispatcher responsible for coordination of maintenance activities at the Refinery.
Familiar with various kind of instrumentation equipment, like: TAYLOR, FOXBORO, HARTMAN & BRAUN, CROWCRONE, MASONEILLAN, FEA, SHIMADEN, YOKOGAWA, FISHER ROSEMOUNT, etc. Also participating in different activities for the electric and electronic equipment for automation of machine tools.

December 1996 – March 1998
TELFORD INTERNATIONAL ltd and ANSALDO COMPANIES
UNITED ARABIC EMIRATES, MIRFA POWER AND DESLINATION PLANT
Instrument supervisor
Controlling the installation of the instrumentation and control equipment, and supervising the related commissioning. Working together with specialists of ANSALDO ENERGIA and HARTMAN BRAUN companies. Also collaborating in the control and start up of the analysis systems, such as: analyzers of water oxygen content, carbon monoxide and carbon dioxide analyzer, and water conductivity analyzer.

1991 - 1996
ASTRA Refinery, Ploiesti, Romania
Instrument dispatcher
Following up repair and maintenance work schedules associated with the instrumentation and the refinery plants, including the machine tools workshop.

1988 - 1990
BASRAH PETROCHEMICAL COMPLEX, IRAQ
Instrument foreman
Involved in control of the regulating loops associated with the pyrolysis plant, chlorine plant, and low and high-pressure polyethylene. Participating in the commissioning of the plants and maintenance stage. Also working in the workshop for repair of instrument electronic equipment. Liaison with American, English and Iraqi specialists of LUMMUS Company.

1987 – 1988
PETROMIDIA SA CONSTANTA, ROMANIA (Petrochemical works)
Instrument foreman in pyrolysis plant
Participating in pre-commissioning, commissioning and start up of the plant.

ASTRA Refinery, Ploiesti, Romania
Instrument repair workshop, instrument electro-mechanic
Responsible for repair and maintenance of transducers and recording apparatus. Ensuring the service activities and control equipment of the following plants: CDU & VDU, gas fractionation, hydro fining of mineral oils, oils de-asphalting. Also performing repair and maintenance activities for the electric and electronic equipment for automation of machine tools.

1974 – 1986
DERO LEVER SA PLOIESTI ROMANIA (Détergent factory)
Instrument electro-mechanic for instrument repair workshop.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 2726)

Go to Search Parameters...

Brief Description

Respected sir, I am NCVT 3 year technical exam passed in plant operation & minor maintenance. Presently I am working in Reliance Refinery Jamnagar, India, in FCC complex and taking charge in propylene recovery unit and shp-tame unit.

Carrying out surveys of plant & buildings in relation to existing or proposed instrumentation and controls. Writing of reports.

Bachelors of Mechanical Engineering (89%, A+) (2003-2007)

Responsible for the process of Liquidated Damages – Post Order Services;

Familiar in process control operation with Honeywell TDC-300DCS and Fox Pro. System.Can operate all plant auxillaries and utilities.Can do mechhanical trobleshooting/repair of all plant equipments.

QC-Inspector-(Welding)

Well Site Drilling/ field & HSE Engineer

DATTARAM Scholarship for highest aggregate marks in Geology during three years graduation.

20+years wide variety of experience willing to work anywhere

I have 27 + years experience in Oil/Gas/Power Generation & as On Job Trainer

OIL AND GAS OFFSHORE OPERATION and PRODUCTION SUPERIVISOR/SUPERINTENDENT

Operations, Drilling and workover technical, 26 Years experience in oil and gas industry, experience work in the jungle and some off shore.

7 months Trainee at the International Institute for Geo-Information Science and Earth Observation (ITC), The Netherlands. Educational assistant first-year practical “Rocks, Maps and Profiles” '02, Part-time field assistant '99-'01. Member of the board of the Geological Society of Utrecht,'99-'00

I am a certified Marine Chief Engineer with substantial experience on board container vessels and bulk carriers as Second Engineer. I am a trustworthy management level engineer officer with the necessary knowledge and skills for the proper operation, maintenance and repair of different machinery

Develop, plan, co-ordinate, conduct, and provide follow-up, for safety and fire training courses for all personnel, contractors and visitors to the company's facilities and also directs and controls the activities of the Company EHS/EMS

Driller

Demonstrated expertise of well logging services and wellsite operations for both wireline and LWD. Expertise in the application and interpretation of the most advanced technology such as magnetic resonance logging and formation testing and sampling.

Technician in production of hydrocarbons

Highly Skilled Professional

Dear Sir, I am a Geologist, Presently I am working with Sperry Sun Drilling Services (a Halliburton Company) for PDO (Petroleum Development Of Oman).

Experienced directional driller with 26 years drilling rig experience seeking new opportunities.

Seasoned Drilling Sup't - Onshore - with 15 years experience as a Drilling Sup't. 20 years of international experience. 18 years in the Middle East. A logical and systematic problem solver. A cooperative and friendly colleague. English is my mother tongue, but also moderately fluent in French.

A dedicated professional with excellent technical, management and inspection skills. I maintain strong supervision, training and motivation abilities. Acknowledged as a dynamic performer with a high level of initiative and commitment to quality. A team player with superb communication skills.

Production Operator with 6 yrs exp in Petrochemical,Oil & Gas fields

Operations Manager with 13+ years oil and gas experience. Experience in operations, Hr issues, Safety, contracts, budgets etc. Vast experience in Wireline, Slickline, braided line, electric line, coil tubing & completions/workovers. Exp in jackups, drilling boats, fixed platforms & land rigs.

Experienced in all aspects of the following: -

I have valid IWCF Well Control, Sea Survival Certificate, Fire Fighting, and H2S. I am self-motivated and willing to work hard, pro active, have a good interpersonal communication skill, good leader ship and I can work individually or in team

I have 4 year of plant operator experience. I hold a valid 4th class power engineering certificate with part A of the third class conplete. I have SAGD and upgrading refinery experience which gave me amounts of skills required in this field of work.

I am a hard working, friendly, and loyal individual. I strive to learn new things, and am always up to the challenge of the ever changing oil and gas industry. I have been a Coiled Tubing Supervisor with Halliburton for 7 years.

I am computer literate, possess good interpersonal and communication skills, available for team work and always have the zeal to achieve whatever goals set

To put my best possible efforts by applying my professional qualification and expertise in order to enhance the image of the organization in which I am working

REsume for Petrophysics or Geoscience Tech

Foreman on Oil Jobs

I am a Chemistry graduate having fifteen years experience from petorchemical and ammonia plants. At present I am working as a shift chemist in Saudi International Petrochemical Company. Previously I was worked in Madras Fertilizers Ltd as Senior Lab Analyst. Kindly consider my resume.

Overall In-Charge for all Catering Operations at the Installation, Cost & Waste Control, Menu Planning, General Housekeeping for in and out of Accommodation and living Quarters, Providing Laundry Services, Practice of Safe & Environment Garbage Disposal, Mobilizations of crew and job rotation, etc.

Logistics 10+ years experience including: Commercial (Mining) project logistics; Humanitarian aid ; and, Military. Transportation & Distribution management; Warehousing; Purchasing. Fluent in both English and French; and computer literate.

To obtain a position in the offshore oil & gas drilling industry which best utilizes my extensive mechanical skills and background while providing for career advancement. Currently residing in Fort Collins, CO, and in process of relocating to the Houston, TX, metropolitan area.

I AM EXPERIENCED ELEVEN YEARS IN OIL AND GAS, SR.PRODUCTION OPERATOR ONSHORE AS WELL AS OFFSHORE IN MULTI NATIONAL COMPANIES. I AM LOOKING FOR A BETTER APPORTUNITY,PRIOR FOR ME JOBS POSTING 28/28.

I am a female Geologist. I obtained my Msc from Oxford Brookes University, and am computer literate.

B.Sc Computer Sc,MBCS,MCPRN,MBA(In View), Oracle Database Admin, Microsoft Office 2003 & 2007 Suite, Unix, User, System ad Application Support, Data-Center Administration

loaded chemical into varies transports for georgia gulf.

M. Sc., Chemical technology, Polytechnic Institute of Bucharest, working overseas as Panel(DCS)/field operator in Gas Plants, LNG, PP plant.more of them in Nigeria.

Window 98, Millennium, XP, Word, Excel, Access, PowerPoint, Microsoft Project, Adobe Acrobat, Package for Artificial Rising (Flow System, Pipe Phase, Pcpump, Rod Star, Nabla, Perry,DIM, Asad) , Financiers Software, Administration Software, Statistical Software, etc,

EMPLOYMENT WITH Eni ,Bhit Gas Field Pakistan (Italian Oil & Gas Company)

Project leader and technical manager for heavy crude

Since 1995, I have worked as a Planning Engineer / Maintenance Planner in Oil & Gas Industrial, both on offshore and onshore terminal, worked for ARCO, BP and CNOOC companies. Response for Opertioans and Maintenance work activities, good at CMMS-MAXIMO, MS Project, P3 Project Planner.

working in Malaysia ( far east) from 3 and 1/2 yrs. Looking for jobs in oil & gas fields . In field operators or panel operators position with better salary as a long term contract basis preferable in far east or middle east.

My Nine years and Six months of experience , I have exposure in Power & Utilities. I have hands on experience for Gas Turbines, Steam Turbines, D. M. Water Plant, Plant & Instrument Air Package comprises of Dryer and Compressors, Raw Water Treatment Plant, Cooling Tower, and OSBLs.

Team Leader Shift Supervisor, Trainer: Operation at Refinery Processing Plants, Remote Oil & Gas Production Field and High Pressure Systems at NGL Processing Facilities LPG Plant including Petroleum & Petrochemical Utilities. Professional member MInstLM & MCMI UK, MBA Prod. Ops. Management, BSc, BA

Planning, market analysis, oil pricing mechanism/simulation and modelling, forecasting, market research, oil industry management, downstream oil industry facilities monitoring, fuel quality monitoring and evaluation, project management, project proposal preparation, oil and gas project evaluation,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out