Resume - QHSE Assistant with 4 years experience, 8 years in the Oil & Gas Sector, advance...

Misco Jobs

Resume #8004

CONTACT INFORMATION:
View contact information...

Objective
Looking for a Looking for a Position related to the QHSE Activities within the Oil and gas Sector to build up on my previous Experience.

Personal Information

Marital Status Married
Military Status Finally Exempted
Nationality Egyptian
Date Of Birth May 22, 1971

Qualifications and Work History
Weatherford Services Free Zone - Egypt
QHSE Technical Assistant Maadi - Egypt April 2003 until Now
Responsible for the HSE activities beside Develops and implements quality assurance standards for all the Company Locations in Egypt, processes, and controls. Develops methods for inspection, testing, sampling, and training. Evaluates Service capabilities, Statistics and recommends improvements. Assist in developing quality assurance policies and procedures in addition to performing the Internal Audits.
HSE and Quality Control Assistant Maadi - Egypt April 2000 – April 2003
Document all current work processes within their area of responsibility and compile related records and documents into sequentially numbered Job Files.Assist assigned Supervisors as required with organizing pre-shop, in-process and outgoing inspectionsReview contents of the Job file to confirm that the product is in agreement with the customer's requirements and conforms to the established quality standards and specificationsEnsure that inspection records, control charts and maintenance records prepared or required by assigned Supervisors are maintained and accessible during the work process.Assist assigned Supervisors as required regarding equipment that requires calibration and that it is identified, documented and maintained according to specified standards.Assist assigned Supervisors as required regarding maintaining the clear identification of equipment and it's inspection statusAssist assigned Supervisors as required regarding receipt of and dispatch of equipment to and from customer locations.Coordinate activities of maintenance staff and the Supervisor to help ensure correct procedures are understood and followed.Report all non-conforming activities and equipment to the assigned Supervisor Compile quality feedback data and quality history sheets as requestedCoordinate with assigned Supervisors to help ensure that equipment is not allowed to leave the premises below the desired standardPerform other various duties assigned by supervisor within the physical constraints of the job.

Sahara Petroleum Services Company / Syria - SAPESCO
Quality Assurance Assistant Dier Ez-Zoor - Syria April 2000 – October 2002
-To assist workshop supervisors in the various processes involved in maintaining company equipment according to established Quality Assurance procedures and processes. -Process all necessary documentation as required by the Workshop Supervisors
CAM Supervisor Dier Ez-Zoor - Syria May 1998 - April 2000
* Responsibility is running the Computer make-up Analyzer (CAM) or the Power Tongs during the Completion, Casing and Bucking Operations. * Operate the Tubing and Casing Bucking Jobs in the Company or Client Workshops.
Core Eng. Dier Ez-Zoor -Syria March 1999 - April 2000
* Responsibility is running core jobs for SHELL Syria Development Department (SSDD), Al-Furat Petroleum Co. (AFPC), Dier Ez-Zoor Petroleum Co. (ELF) and Syrian Petroleum Co. (SPC) * Design the Core assembly and BHA (cooperation with the Client Rep.). * Assemble and disassemble the Core Equipments - CorPro Designs, UK. * Operate the Coring by the related Parameters. * Finalize the core recovery (cooperation with the Rig Site geologist). * Fully responsible for Coring Stock control & replenishment orders.
Contract Eng. Dier Ez-Zoor - Syria May 1996 - April 1998
* Responsibility was inspecting, assembly and disassembly the Hydro-mechanical jars [DJ6] and Shock Tools [ST5] -Cougar Tool Inc. Designs, CANADA. * Several W/S activities in addition to Following up the fishing tools redressing. * As well as structuring a computerized data base for AFPC Drilling Movable Equipment on Microsoft Accesses and continuously updated it according to Actual utilization.
P.G.S. Tensor Geophysics Middle East
Geophysicist Naser City - Free Zone Oct., 1995 TO April, 1996
* Seismic Data Processor, Passing through 2-D and 3-D data Processing Steps * Worked on INTEL IPCS 860 using UNIX Operating System (Specially in 3-D Marine Data), VAX 8650 using VMS Operation System, DISCO Package and Ovation System. * Writing the Status, Weekly Report and Time Line Sheets on the PCs by using Windows Programs.
SUNRISE Group [Custom Clearance Japanese Co.]
Cargo Operator Agoza - Giza March, 1995 TO Oct., 1995
Cargo Operator in both Export and Import Sections.
Agriculture Economic Researches Institute [AERI
Samples Operator Dokki - Giza October, 1994-Mar., 1995

QHSE Training Courses Attended Statistical Quality Control Egypt 2004
Auditor / Lead Auditor (attendance) Egypt 2003
Safe Start Algeria 2003
First Aid Egypt 2002
Emergency Response Syria 2000
Dehydration Case Syria 1999
NORM Syria 1999
H2S Syria 1998
Berthing apparatus Syria 1998
Defensive Driving Syria 1997
Handling and stepping Syria 1997
First Aid Syria 1996
Fire Fitting, Syria 1996

Language Skills Arabic: Mother Language. English: Capable of Business conversations. French: Capable of Simple Conversations and reading

Academic Qualifications Cairo University
Bachelor of Science - Geophysics Giza Egypt November 1994
ICL
MCP - Microsoft Certified Professional Giza Egypt March 2001
MCSE - Microsoft Certified Systems Engineer Giza Egypt August 2001
MCDBA - Microsoft Certified Data Base Administration Giza Egypt July 2001
Oracle DBA - Oracle Database Administrator Giza Egypt October 2001
Computer Skills Microsoft Office 2000 Programs (WinWord, Excel, PowerPoint and Access)[Expert]. Graphics and Designing Software (Adobe PhotoShop, Corel Draw and AutoCAD)[basic]. Visual Basic Programming Language (AUC)[Basic] HTML and Web Page Design (IBM)[Basic] SQL (ICL)

Coordination and Administration Assistance Skills * Planning maintenance programs in cooperation with the supervisor. * Following up the ISO 9000:2000 filling system. * Issuing the technical Reports regarding to Failures or complain points. * Material handling and rejection procedure implementation. * Following up the strict implementation of workshop safety policies and the personnel safety working attitudes. * Stock control, replenishment orders and Monthly Stock Status Reports.* Tool Movement documentation, Utilization records and Performance statistics.* History cards, Utilization records and Performance statistics.* Monthly Service Invoices and Operation Reports.* As if & when required personnel shift schedules and bonus / overtime control.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 2494)

Go to Search Parameters...

Brief Description

Providing technical review and recommendation for peers. Knowledge in Project Managemant, HYSYS. Training in ISO 9001:2000, OHSAS, ISO 14001:2004

If you are looking for a dedicated, hardworking, honest, dependable employee who can think “Out Side the Box”, see further into the future than the end of his nose and is a dedicated team player - your search may be over.

Safety/Env (HSE) post sought (Will also accept Quality related positions) Reliable/Flexible/Language proficient - Willing to work worldwide, available from May 2008

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

25 yrs mining experience. Engineering. Operations. Supervised heavy equipment. Team player. Give job 100%. Quick learner. Show respect to all individuals. Represent employer with professionalism. Impeccable attendance & safety. Open to international positions

I have had experience in most forms of drilling, workovers and stimulation. I have limited coil tubing experience, but have a good working knowledge. I am used to working overeseas with people whose first language is not english.

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

To obtain a supervisory / team leader position in the diesel mechanic field with an actively growing company in the oil & gas, trucking, marine or mining industries. I also desire to apply my supervisory skills to improve company profitability while enhancing customer and employee satisfaction and

GIS analyst , GIS Developer , GIS Trainer SDE administrator , GIS Data manager

Extensive experience in supervision and inspection of structural and architectural works for high rise buildings, residential, commercial, industrial, roads and bridges and large infrastructure with an over all responsibility for successful and timely project delivery

A competent and enthusiastic hydrogeologist with 4+ years of experience in the field of earth science. Specialises in dewatering, recharge and groundwater management projects. Has experience in project management, river basin management plan, drilling and pumping test supervision,

Computer software as: Office - AutoCAD- mechanical desktop - working model + fluent in speaking, reading, writing English & Turkish + Farsi is my native language+ Azeri is my mother tongue

I am a Chemical Engineer with Masters in petrochemicals and polymers. Problem analysing and solving capabilities supported by strong technical background and enhanced by effective communication skills are my major competencies.

Diploma in Chemical Engineering and 11 yrs. of experience of refinery and petrochemical plant operation as a field/panel operator.

Free! Sales, Communication, Customer Relations, Computer Operations, Microsoft Office, Equipment Transport & Operation, Interpersonal Skills, Extreme Procurement, Project Management/Planning, Quality Control, Quality Testing, Chemical Analysis, Troubleshooting, Problem solving, Safety, Hazmat, Hazardous C

Manager / Supervisory position in the field of Administration, Personnel, Finance Accounting, Business

QS/ISO 9000, FMEA/ Control Plan/PPAP

Professional Engineering,construction & Commissioning of electronics and pneumatic Experience types of instruments such as transmitters, pr. switches, control valves, RTD's Leveltroll, I/P converters, mass flow meters,

I have over 19 years of experience working in the Petroleum Pipeline Industry doing a variety of roles. Until very recently, I have been on a special assignment as a “Lead Project Inspector” on a new Pipeline Delivery Facility, but also have other additional managerial & supervisory responsibilities

Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance

D.M.E, Autocad 2D&3D handling all high-tech machineries

15-years of experience as Document Controller for vendor & design documentation in gas and oil industry.

Seeking assignments in Process Control Instrumentation, Analyzers, Maintenance and Erection-commissioning with a growth oriented organization of repute.

7-years High School. Experience covers surface and subsurface production maintenance operations, onshore and offshore facilities’ maintenance, engineering projects execution, drilling equipment maintenance, planning and training aspects in various supervisory and management roles.

Gas turbine controls mark

Excellent team working skills, Excellent negotiation skills, capable of working under pressure and meeting deadlines, high quality customer service skills, and high quality communications skills

2 years experience in power plant chemist, 3 years experience in industrial water treatment, well known water chemistry and corrosion chemistry, process and troubleshooting

Sales manager , marketing manager, consultant Masters in business administration MBA

Health safety and environment officer

Geothecnic, environmental, hydrogeologic, operation

CADD DRAFTSMAN

Self stater and takes full charge of enterprise

Experienced and innovative operation & maintenance engineer with technical leadership in commissioning & operation and maintenance activities, quality achievement, reliability, efficiency, customer service and cost reduction goals. High level of management skills with outstanding leadership and

Service Support/ Product Support Heavy Equipment Maintenance Manager

1992 entrances as professional soldier into the Austrian federal-army, after conclusion of the necessary courses 1996 takeover as official. 1998 graduations of the NCO-course. Special training in the telecommunications-area for shortwave and ultra-short-wave as well as data-radio.

Chemical engineer with more that 6 yrs of experience in the field of process and projects

Site Manager, Supervisor, Commissioning, Start up, Troubleshoot,

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

Experienced with pumps, fans, turbines and compressors and all support equipment

12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc

QHSE Assistant with 4 years experience, 8 years in the Oil & Gas Sector, advanced PC Skills and Statistical Techniques.

Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation

Wealth of experience gained within an International Company in all aspects of Wireline, LWD, well placement and ‘geosteering’ in both onshore and offshore projects. To secure employment within a challenging exploration or developmental role to fully utilise six years of field experience.

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

Chemical Engineer with Environmental Engineering experience

Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased

Senior Mechanical Engineer, Bachelor Of Engineering

I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.

Operations Manager or Shift Supervisor in a Power Plant

Rigging/Heavy Lift And Transport

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out