Resume - PhD in Chemical engineering with lots of laboratory experience including, but no...

Misco Jobs

Resume #80150

CONTACT INFORMATION:
View contact information...

Objective: Seeking a Research and Development Position with Emphasis on Creative Solutions to Renewable Energy, Process Engineering and Materials Synthesis

Current Research:
* Heterogeneous Catalysis with respect to Nanocatalysts synthesis and Applications
* Chemical Synthesis with respect to Reactor designs and Characterizations
* Drug Delivery
* Biofuels with concentration on Biodiesels and Ethanol fuel cell
* Hydrogen Production (electrochemical and photoelectrochemical)
* Energy Conversion (stationary and automotive devices).

Education:
Doctorate of Philosophy, Chemical Engineering, Fall, 2008
University of South Florida, Tampa, FL, USA

Dissertation: Endurance Materials for Hydrogen Sulfide Splitting in Electrolytic Cell

Graduate Certificate, Material Science and Engineering; September 2008
University of South Florida, Tampa, FL, USA

Master of Science, Chemical Engineering; Fall 2004
North Carolina Agricultural and Technical State University, Greensboro, NC, USA

Honors Thesis: Heterogeneous Catalytic Acylation Reactions in Supercritical Carbon Dioxide for Manufacture of Pharmaceutical Intermediate

Bachelor of Science, Chemical Engineering; August 1999
University of Lagos

Honors Thesis: Power Consumption of Mixing Impellers in Homogeneous Fluid

Group Plant Design: A Chemical Plant to Manufacture 30, 000 Metric Tones per Year of Methyl Ethyl Ketone (MEK)

Skills
Computer: Six Sigma, Microsoft Office, Matlab, LabView, SAS, Chemdraw, PSPICE, Comsol Multiphysics

Lab: Design of Experiment (DOE), Sonifier, Glovebox, chemical handling, lab safety and inventory management, Fourier Transform Infrared (FT-IR) spectrometer, Ball Mill, Gas Chromatography (GC), BET Analysis(Physisorption with nitrogen gas and Chemisorption with hydrogen gas), Thermal Programmable Detector (TPD: Autosorp Software), Impedance Spectroscopy, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Simultaneous DSC and TGA (SDT), Gas Permeation, XRD, SEM-EDS, GC/MS, Demonstrated knowledge of OSHA and environmental regulations

Special: Ability to work both independently and as a group

Research Experience:
Clean Energy Research Center (CERC) in affiliation with Department of Chemical and Biomedical Engineering, University of South Florida

PhD Accomplishment
As an employee of the Clean Energy Research Center (CERC) in affiliation with the Department of Chemical and Biomedical Engineering, University of South Florida, I did the following:

* Prepared and wrote comprehensive technical research reports for the United States Department of Energy (DOE)

* Project management and co-prepared research proposals

* Developed and formulated a novel anode nano-electrocatalyst metal composite which has high catalytic active area to enhance the electrochemical cell kinetics in splitting of (100 %) hydrogen sulfide content feed gas.

* Designed and fabricated an electrolytic cell apparatus for hydrogen sulfide splitting; an apparatus for monitoring and control of hydrogen sulfide, sulfur (similar to sulfur compartment in sulfuric acid battery) and hydrogen flow

* Developed a novel approach to enhance the ionic conductivity of cesium hydrogen sulfate, a solid inorganic crystal whose proton conductivity increases by four orders of magnitude at elevated temperatures, by applying process modeling technique and by mechano-chemical pulverization method.

* Designed an array of experiments, using statistical factorial experimental design, to examine the effects of different electrocatalysts applications, electrolyte thicknesses and voltage inputs on the current density and performance of the system

* Designed and implemented a LabView program used for the entire process

* Successfully applied the apparatus fabricated to split (100 %) H2S content feed gas electrolytically to two saleable products- hydrogen and sulfur. The process was also operated in fuel cell mode to generate electricity, water and sulfur

* Examined the factors that affect electrolyte thickness such as, permeability and mechanical integrity

* Carried out system optimization, process scale-up and economic analysis capable of reducing the cost of sulfur production section of the integrated gasification combined cycle (IGCC) power plants and other related oilfield applications

MS Accomplishment
* Successfully developed, designed and applied both batch and plug flow reactors in the production of pharmaceutical intermediate (4-Methoxy-acetophenone). The design process incorporated the application of heterogeneous catalysis (zeolites) and the use of supercritical carbon dioxide as solvent.

Teaching Experience:
* Instructor Chemical Engineering Junior Laboratory: Supervised and instructed students in laboratory techniques (Fall 2008)

* Teaching Assistant Chemical Engineering Senior Laboratory: Co-designed experiments and supervised students (Spring 2008)

* Teaching Assistant Chemical Engineering Thermodynamics, Fluid Mechanics and Heat Transfer: Graded homework, prepared answer solutions, assisted students individually for help on homework and projects, facilitated review sessions, proctored and graded mid-term exams (Spring 2004- Fall 2007)

Industry Experience:
Dow Corning Corporation, Greensboro, NC
Production Intern (June 2001-August 2002)

* Performed material handling analysis for quality control purposes, and application of LabView software in the manufacture of antifoam, lubricants, compounds and grease

* Co-prepared batch record and production run sheet

* Acquired knowledge of process plant operation, participated in plant operation and maintenance

* Participated in new product scale-up and equipment troubleshooting

* Application of statistical process control using SAS program in production processes

Provisional Patent:
"Electrolytic Decomposition of Hydrogen Sulfide using Cesium Hydrogen Sulfate Thin-Membrane", Filed October 2007

Selected Publications
* Elias Stefanakos; Burton Krakow; Jonathan Mbah, "Hydrogen Production from Hydrogen Sulfide in IGCC Power Plants", (DOE Information Bridge), http://nsdl.org/resource/2200/20080812094136518T

* Jonathan Mbah, Burton Krakow, Elias Stefanakos and John Wolan, "Electrolytic Splitting of H2S Using CsHSO4 Membrane" J. Electrochem Soc., 155 (11) E166-E170 (2008)

* Jonathan Mbah, Burton Krakow, Elias Stefanakos and John Wolan "A Study on H2S Permeability of CsHSO4 Membrane", International Journal of Hydrogen Energy, Volume 34, Issue 5, Pages 2460-2466, (March 2009)

* Jonathan Mbah, Burton Krakow, Elias Stefanakos and John Wolan "Influence of High Energy Planetary Milling on the Ionic Conductivity of CsHSO4", Electrochem. Solid-State Lett., Volume 12, Issue 7, pp. E12-E16 (2009)

* Jonathan Mbah, Eric Weaver, Sesha Srinivasan, Burton Krakow, John Wolan, Elias Stefanakos, "Low Voltage Electrochemical Hydrogen Production by SO2 Scavenge Process", J. Electrochem. Soc., under editorial review, (2009)

* Jonathan Mbah, Sesha Srinivasan, Burton Krakow, Elias Stefanakos and John Wolan, "Synthesis, Structural, Microstructural, Surface, Optical and Catalytic Properties of CoS2 Nanoclusters for the Electrochemical Hydrogen Production", Chemical Society Review, In Preparation

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 2725)

Go to Search Parameters...

Brief Description

Experienced with pumps, fans, turbines and compressors and all support equipment

HSE Engineer with Quality experience, consultant, Mechanical Engineer

Procurement Management, Project Manager, Expeditor, Logistics, Scheduler, Material Manager, Buyer, Purchaser, Contract Administration, Bilingual Spanish, Pricing and Biding, Quality Assurance

12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc

Procurement Purchasing Logistics Inventory Control Contracts Negotiations

Security Executive with massive corporate and international exposure. Expert in Afrcan matters and have massive and extensive security network in Africa.

I am a South African currently living in Ghana. I am looking for opportunities in Finance. I have extensive experience from working in Nigeria and Ghana.

Principal Consultant, BSc (Hons). MSc. DIC. 8 Yrs experience in Contaminated Land assessment and Remediation.

QHSE Assistant with 4 years experience, 8 years in the Oil & Gas Sector, advanced PC Skills and Statistical Techniques.

Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation

Wealth of experience gained within an International Company in all aspects of Wireline, LWD, well placement and ‘geosteering’ in both onshore and offshore projects. To secure employment within a challenging exploration or developmental role to fully utilise six years of field experience.

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

Chemical Engineer with Environmental Engineering experience

HSE Remote Safety Medic, Offshore Medic, Emergency Medical Technician, Safety Officer

Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting

Mechanical engineer with two years exp in water treatment plant. Proficient in Autocad

Maintenance Planner - Mechanical Engineer

Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased

Senior Mechanical Engineer, Bachelor Of Engineering

B.E – Ceramics & MBA, having with 12 years of experience in an integrated Steel Plant Projects & Maintenance of Refractory -Applications/Installations/Selections/Inspections in India and Abroad

I am a multi tasker. I can handle working in harsh conditions. I don't mind getting out of the equipment to help the team. I am willing to relocate and/or travel to wherever the company needs me.

I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.

PhD in Chemical engineering with lots of laboratory experience including, but not limited to design of experiment. Cummulative GPA 3.52. Specialized in electrochemical synthesis.

Operations Manager or Shift Supervisor in a Power Plant

I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse

MWD / LWD Field Service Engineer . Versed in all Positive Mud Pulse, Electro-Magnetic (EM), Wired Pipe Technology (IntelliServ), MCLS, MWD probe and collar based tools. Knowledge of Directional Drilling principles, and downhole vibration management.

I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.

Master in mechanical engineering (ENIT)

Project Management / Engineering Coordination / Process Engineering / Business Development

Experienced in deep excavations for 20 years, specializing in sewer and water and installation of large diameter pipe, as well as Mass excavation and Heavy Highway work.

CA, CIA, CPA

Senior Instrumentation & Control and Telecom-SCADA Engineer

Water Survival, Safe Gulf, Trained in CPR and First Aid, Rigging Certifications

ITI in Instrument Mechanic, diploma in Electrical Engineering 5th Sem, working in Procter & Gamble Company

Instrumentation & Commissioning Analyzer Engineer

Innovative thinker with broad-based expertise in human resources, and business development.

Welding and electrical and management and mining class 32 hour certified fork lift operator

Free! DYNAMIC PROFESSIONAL - MASTER OF SCIENCE - CONSTRUCTION SAFETY COORDINATOR - PROJECT MANAGER -ADVANCED FIRST AID, SAFETY, & RESCUE

In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.

Hardworking, easy learner,..... Bachelor of engineering in instrumentation

Engineer, MWD, LWD

To secure a position in Environmental Health and Safety (EHS) Compliance with an established organization utilizing my 20 years of EHS skills, knowledge and experience.

20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.

I have a master degree in Chemistry and post graduates in International Law and Ecology. I have worked as an HSE specialist for more then 13 years.

Oracle Functional Consultant with over 10 years of experience in the Finance domain

I hold Higher National Diploma in chemical Engineering, from Kaduna Polytechnic. My skills are; water treatment processes, safe chemicals handling,process valve control, Pumps operations, safety (HSE), Chemicals preparation, Process monitoring, Instrumentation, Chemical cleaning, etc

Chemical Engineer with experience in proeudction and enigneering

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

A Process Instrumentation diploma holder with 14 + Years Experienced in MNC EPC and Client side as E&I Inspector, presently working in Maersk oil Qatar and deputed in india and oman. seeks suitable opening.

Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out