Resume - 6++ years experiences of Yokogawa & Honeywell DCS

Misco Jobs

Resume #80309

CONTACT INFORMATION:
View contact information...

KEY QUALIFICATION:
„«6++ years jobs experiences in overseas & domestic projects.
„«Working experience in engineering work and site work (startup & commissioning) for oil & gas, power plant (steam turbine), petrochemical industry as well as pulp & paper.
„«Working experience in control system design, troubleshooting jobs hardwire & software design.
„«Ability to work independently as well as a team, to keep self motivation, hard worker & eager to learn something.
„«Hands on experience working with Honeywell Experion PKS & Yokogawa Centum CS3000 DCS.
„«Hands on experience working with Honeywell Process History Database (PHD).
„«Hands on experience working with Yokogawa Plant Resource Manager (PRM)
„«Hands on experience of Pro-Safe RS (Safety control system), F&G system.
„«Experience in many variety of Foundation Fieldbus devices configuration such as: Fisher, Vega, Smar, Ohmart, Foxboro Level Tranmitter, Yokogawa, E&H, Dresser, and Siemens.
„«Experience in OPC & TCP/IP communication.
„«Experience in Profibus, Modbus communication & configuration.
„«Experience in CCTV (software & hardware) installation & troubleshooting.
„«Hand on experience working with Fire Alarm System & Building Automation System.
„«Good knowledge in Field Instrument such as Control Valve, Sensor Transmitter, I/P Converter.
„«Good knowledge of PLC (Programmable Logic Controller)
„«Good knowledge of instrumentation, measurement, PID control tuning, pneumatic system and P&ID drawing.
„«Good knowledge of networking system.
„«Good knowledge of Pro-Safe RS (Safety control system), F&G system.
„«Familiar with Standard Operation Procedure (SOP), hot change over.
„«Familiar and good ability to operate personal computer program such as Autocad 2007, Microsoft Project, Windows 2003 Server, Visio Technical and the other application.

DETAIL EXPERIENCES:
Yokogawa Saudi Arabia Company April 2007- Present
I was hired as DCS Engineer to be responsible for DCS startup & commissioning post project engineering.

Main Responsibilities:
„«Support in the F.A.T. (Factory Acceptance Test) depending on the situation with each project.
„«Involve in the Project Hand-over between Engineering and Start-Up team.
„«Involve engineering during detail design and engineering stage.
„«Inspection of system during unpacking.
„«Installation of DCS system
„«Pre- Power-On test
„«Loop-check and commissioning of system & project (including supervision of instrumentation construction crew).
„«Troubleshooting in DCS system (hardware & software) during loop checking activities.
„«Logic/HMI modifications corrections and/or enhancements as necessary
„«Support the DCS Site Planning and Scheduling.
„«Informal on-site training.
„«Assist in documentation- activity logs, reporting, and mark-up of as-built drawings etc.
„«Provide technical advisory services during pre-commissioning instrumentation checkout, during the initial powering of the control consoles and process units, during commissioning, and during initial plant operation and tuning.
„«Design site modification.

Main Project have been handled:
oOlefin Plant HOFCC, PetroRabigh, Saudi Arabia as Startup Engineer Nov 08 ¡V present
Responsible: - Support EPC (JGC Saudi Arabia) for startup activies.
- Site modification (logic, control sequence)
- Provide technical advisory services during initial plant operation and tuning oPolymer Plant HDPE/BUTENE-1, PetroRabigh, Saudi Arabia as Lead DCS EngineerSept.07 ¡V Oct 08
Responsible: - Support FAT execution
- Created FAT report.
- Scheduler & Planner for SAT activities.
- Execute Site Acceptance Test activities.
- Mark-Up drawing for as built documents.
- Responsible for checkout of power supplies, initial power up of DCS processors and operation stations, and loading DCS system software
- Support EPC (Tecnimont Saudi Arabia) for Commissioning Activities.
- Support loop checking, (troubleshooting at DCS Hardware & Software).
- Ensuring the Assigned Project is managed and delivered to technical satisfaction.
- HMI display and hardware I/O assignment modification oHawiyah Gas Plant, Saudi Aramco, Bahrain May ¡V Aug 07
Responsible: - Coordinate with sub contractor during panel termination.
- Loop checking
- Pre FAT & FAT execution

PT. Honeywell Indonesia (Jakarta) Sept. 02- Mar 07
I was hired as DCS Engineer to be responsible for Service & Project Execution in Petrochemical, Oil & Gas, Power Plant, Pulp & Paper.

Main Responsibilities:
„«Hardware design, panel layout, panel internal wiring, subsystem communication.
„«Design HMI for Plant Automation based on P&ID
„«Design Guide & Model, Preparation of automation system, instrument loop drawing & wiring diagram
„«Design Application, Logic & Sequence Implementation based on Process Description, P&ID & logic diagram
„«Create project progress report & monitoring to prepare progress meeting, review & evaluation.
„«Supervision subcontractor during FAT/SAT installation.
„«Start up, Commissioning and Post Project Support & maintenance

Reason for Leaving:
Looking for another challenge and experience in overseas company.

Main Projects/Services have been handled:
* Boiler Power Plant Project at IKPP Perawang, Indonesia, as DCS Engineer
Responsible: Setup/Startup DCS System, create application block builder base on control logic diagram or process description, test Loop from DCS display to field instrument, wiring supervision on site, configure GE Fanuc Versamax I/O & make HMI Display

* Petrochemical project ¡V Petrocentral Gresik, as DCS Engineer
Responsible: Build block application, build Display base on P&ID and link to DCS Server, configure DCS Honeywell Experion PKS, build I/O assignment base on I/O loop list, make engineering documents & supervisory site installation.

* Reinstrumentasi Kilang UPII SeiPakning project¡VPERTAMINA UP II, as DCS Engineer
Responsible: Build display base on P&ID and link to DCS Server, configure Honeywell Experion PKS, build I/O assignment base on I/O loop list, configure C200 I/O assignment, build application block, make engineering document, supervisory site installation, startup & commissioning SAT/FAT & build PHD (Process History Database) Shadow-Buffer configuration.

* Chemical Plant Project at Bukit Muria Jaya PM#2, Indonesia, as DCS Engineer
Responsible: Build Display base on P&ID and link to DCS Server, configure Honeywell Experion PKS, build logic base on I/O assignment, configure GE Fanuc I/O, FAT (Factory Acceptance Test), make engineering document & supervisory site installation

* PT. Indah Kiat Pulp & Paper PM#3 in Perawang, Indonesia, as PHD Engineer
Responsible: Build PHD (Process History Database) software, configure Oracle 9 & etc, setup tag no. & display, setup connection to Honeywell DCS, setup connection to ABB system using FTP & give operator & engineering training.

* PT. SPN at WTC Mangga Dua Jakarta, Indonesia, as Site Manager
Responsible: Project planning control and make project schedule, coordination meeting with the customer & others contractor, project weekly meeting, supervisor the technician when installed CCTV & Access Card System, make as built drawing & document, give operator & engineering training.

COURSES/TRAINING:
July 1-3 2007: Fundamental Foundation Fieldbus, Yokogawa Middle East, Bahrain
November 13 - 17 2006: Honeywell DCS Experion PKS, Bangkok Thailand.
March ¡V May 2004: MX Proline Specialist at Honeywell Measurex, Ireland
December 2003: CISCO BCSMN at Inixindo, Jakarta
November 2002: Fire Alarm System Programming at Honeywell, Singapore
March ¡V May 1999: PLC OMRON, Puslitbang KIM LIPI Serpong

INTERESTS:
Badminton, Hiking and Travelling

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 2726)

Go to Search Parameters...

Brief Description

Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan

Operations Supervisor - Overseas experience

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

Environmental Consutlant/ Management - International Experience

I'm working in Pakistan PTA Plant (ICI). I have one year working experience.

Field Project Manager (Crosswell Seismic). Highly motivated, enthusiastic Borehole Seismic Project Manager with 11 years of wireline and seismic experience. Successfully managed numerous projects in diverse locations around the world.

I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial

Chemical/Process/Project/Field Engineer/Chemical/Process/Project/Field Engineer

HSE Specialist

Operations, coordinations, MIS, Advanced Excel, Customer service

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

Senior Instrumentation Specialist / Designer

Incharge for operation and maintenace of Diesel Generators and Aux. boilers. And also responsible for inventory and requistion management for these eqpts. In total i have 3 years of sailing exp. Presently sailed as 3rd engr. Recommended for promotion by senior engineers.

Working as Commissioning/project engineer in Kim Heng Shipbuilding & Engineering

been in oil field for 2 years, been in some type of managment for over 7 years

Project Planning, Scheduling and Forecasting, Progress measurement and reporting, Man-hour tracking and control, Project Control, Project and Maintenance Management/Planning/Scheduling. HND Computer Science, EMsc Project Management

SIR I am mechanical engineer,if my qualifation are suitable for any job please contact me.i can give good results and new method for doing any work.

Diverse experience in the fields of failure analyses, corrosion of steels, protective coatings and paint film systems, welding and materials selection, complemented by a strong background in mechanical engineering. Excellent communication and organization skills, dedicated to quality and accuracy wi

CCNA, CCVP ,C, C++, HTML, DHTML, ASP, JavaScript 1.2, Java 1-2, CGI-PERL, MS Office, MS Exchange Server, windows, Windows NT 4.0, windows 2000,2003,SQL Server, MS Access

Geologist

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

MSc Engineerign Geology, experienced in geotechnical engineering designs and SI

Senior Systems Analyst experienced in managing cross-functional projects with a high focus on customer satisfaction seeking a challenging position as a Project Engineer/ Manufacturing/ General Engineer.

As a compboss experiouns 5 years in pipeline contracting company

Strong communication and leadership attributes. Have led more than 20 commissioning/start-ups on chemicals plants in numerous countries.

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

Materials and logistics supervisor and controller.Warehouse and Inventory supervisor.

Rotating Equipment Engineer, Maintenance Engineer, Vibration Engineer, Reliability Engineer, Mechanical Engineer

Logistics, Technology, Transport and Management Professional

Over 10 years in the environmental industries with planning skills, I currently manage over 20 staff involved in a variety of projects focussing on land management, sustainable land use projects, visitor information, media liaison and implementation of national objectives for federal government.

6++ years experiences of Yokogawa & Honeywell DCS

Highly motivated Ph.D. Chemist with a broad range of skills looking for a position that involves challenge and innovation.

A seasoned, highly organized construction professional with over 39 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in all major industries worldwide

Unlicensed Engineer, Diesel Mechanic

Instrumentation supervisor - QP refinaries, Qatar

QA/QC Project Execution Engineer With more than 3 yrs of experience in construction industries

16 years experience as a Safety professional and Paramedic, NREMT-P, Texas EMT-P, Colorado EMT-P, ACLS, ITLS, PEPP, CPR

Any related to GIS

Project Manager, Business Systems Analyst, and Information Developer

Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering

I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

My wish would be to integrate a team of safety, contractor or in the respective specialty . My family circumstances having found stability durable. The formation that I received in this field pushes me to gain this environment in which I smell myself much more at ease. Indeed, the hostile sec

Good at learning and implementing, target oriented, flexible and can work under any conditions

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

Fitter Including Machining and Diesel Fitting

Supply Chain and Customer Service Manager - Looking for relocation in Australia or Africa.

A globally-certified procurement professional with extensive Asia-Pacific experience

LPG/LNG Operations - Bottling & Bulk Supply & Distribution, Project Management, Primavera & MS-Projects

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out