Resume - PLC,SCADA,HMI/MMI,DCS,Temperature Instruments

Misco Jobs

Resume #81239

CONTACT INFORMATION:
View contact information...

Summary

„« 3 years of core experience in the field of Industrial Automation and Control with technical skills in Installation, Commissioning of Programmable logic controllers and development of SCADA

„« Has been with Simplex Solution Ltd, Hyderabad, India as Instrumentation & Control Engineer.

„« Work Profile: Development of SCADA (Supervisory Control and Data Acquisition) using GE-Fanuc software.

„« Hardware/Software Up gradation of MARKV Controller for Gas/Steam Turbines

„« Able to create and read logic and flow diagrams for program design, Programming, simulation. And testing, and start-up.

„« Programming of Allen Bradley PLC using, Ladder Logic Master Software and Installation and Commissioning of GE-Fanuc PLC.

„« Provide technical, maintenance and fault diagnostic support for all Programmable Logic Controller (PLC) based control, safety and data acquisition systems.

„« Basic concepts of Pipe Flow Software ¡V version 4.05.

Professional Qualification

Master's in Computer Science from University of Northern Virginia-Manassas-Virginia (2007-2008)
With (GPA:-3.45/4.00)

Bachelor's Degree (B.E.) in Instrumentation Engineering From Osmania University
(2001- 2005) with I Division (GPA:-3.67/4.00)

Diploma in Electronic & Instrumentation Engineering
From State Board of Technical Education and Training (S.B.T.E. &T.), Hyderabad, Andhra Pradesh.
(1998-2001) with First Division (GPA:-3.45/4.00)

PROFESSIONAL EXPERIENCE

1) Client: HB Technologies Inc, PA August 07 ¡VMarch 08
. NET Application Developer

Description: This is a web based application mainly deals with the generation of the reports and Data process for the Patient information throughout their 117 hospital facilities. This gives complete information about patient, previous history and treatment taken. The software caters to both the patient as well as the administrative aspects of the hospital. Web Reports were developed using ASP. Template Control is used to collect the parameters for search criteria and passed on to the stored procedures to query the database. Perform XML Web Services to retrieve the provider information requested by the client.

Responsibilities:
* Responsible for developing ASP.NET pages using C# in VS.NET2005
* Worked closely with the executive team and end users to capture requirements
* Involved in designing and developing the GUI for the user interface with various controls (Grid View, Repeater, Data List Controls, Validation Controls etc)
* Strong use of User controls to allow optimal code reuse.
* Responsible for Implementing Role based security.
* Extensive use of JavaScript for client-side validation.
* Used ASP.NET Ajax Controls like Update Panel, Update Progress Control.
* Use of ADO.NET (sql Connection, sql Command, sql Parameter, sql Data Reader, and sql Data Adapter classes) to create Data Access Classes.
* Responsible for SQL Server Stored Procedures, Triggers and Indexes.

Environment: C#.NET, ASP.NET 2.0,Visual Studio 2005, ADO.NET, VB.NET, ASP.NET AJAX 1.0, XML, MS-SQL Server 2000/2005, Web Services, Web Parts, HTML, Java Scripts.

2) Client: GE Power Controls, GE-Hyderabad, India July 06 ¡V Nov 07
Title: <I> TO <HMI> Up gradation
Software: Cimplicity, TCI.
No of Projects Done: 3

Description: The Software/Hardware up Gradation of MARKV Controller for the Gas/Steam Turbines. It includes Hardware and Prom ordering, Modification of logic sequences, developing SCADA for Different HMI i.e. Control room server, Local room server, Viewers. This HMI operator interfaces will provide full HMI Server control, monitoring and maintenance functions for Gas/Steam turbine units located in remote places in plant. Testing the whole software by connecting with the MARKV Controller trainer Kit.

3) Client: Warangal Rice Mill, Warangal, India Jan 06 ¡V Jun 06
Title: Rice Mill Automation
Software: Codesys (Messung), SCADA
PLC: Messung Nexgen 5000

Description:
This project deals with automating a Rice mill unit using PLC & SCADA. In brief the control is made available in three modes viz., Auto, Semi Auto, and Manual.
Auto: The entire process is controlled through PLC & SCADA
Semi auto: The process has 80 motors which are controlled by PLC in Auto mode, where as in Semi auto mode 20 selected motors are controlled manually by micro switches provided on the mimic panel and the rest are controlled by PLC.
Manual: Manual enables the operator to take over the control of the whole process manually.
The entire project had 288 Digital inputs and 192 Digital Outputs.

4) Title: Vacuum Baking Oven, Hyderabad-India July 05-Dec 05
Client: NFC
Software: Versapro 2.03, Cimplicity 5.5
Hardware: PIII, GE-Fanuc PLC

Description: Vacuum Baking oven mainly used to bake 4000 tubes. These tubes are baked under vacuum of up to 60*10-5 to avoid oxidation reaction. The process includes vacuum baking oven, roots pumps, roots blower, diffusion pumps which are controlled by electrical switchgear panels. Pirani-cum-penning gauges and thermocouples are monitoring the vacuum and temperature of the chamber respectively. The temperature is maintained by PID Controllers through Thyristor Drives. The whole process is controlled and monitored by GE Fanuc PLC and Cimplicity SCADA software from PC. SCADA system controls the vacuum and temperature, Scaling of feed back analog values, leak rate calculations, communications between PID Controllers and PLC's, PID Profiles loading and report generation.

Technical Skills

Undergone intensive training for programming of following Technologies at Advance Training Institute for Electronics and Process Instrumentation, Govt of India ¡V Ministry of Labor, Hyderabad, A.P
* Allen Bradley PLCs o Model: SLC 500
o Software: RS Logix 500.
* Siemens PLCs o Model: Simatic S7-200
o Software: Step 7 ¡V Micro/Win 32.
* Messung PLCs o Model: Nexgen 5000
o Software: Codesys o Scada: Wgot 32
* GE Cimplicity Scada 5.5 and 6.1
* AC/DC Drives:
1. Configuration of Excellent AC & DC Drives
2. Configuration of Control Technique Drives

* Industrial Sensors
* Field Instruments
* Transmitters
* Controllers
* E-P, P-E convertors
* Final Control Elements
* Recorders-Pneumatic & Electronic

TECHNICAL SKILLS:

Programming Languages C#, VB.NET, ASP.NET, C, ASP, VB
Scripting Languages Java Script, VB Script
Markup Languages HTML, DHTML, XML/XSD, XSL/XSLT, CS
Query Languages PL/SQL, T-SQL, XML Query (XQL), Stored Procedure
RDBMS MS Access, SQL Server 2000/2005
Operating Systems Windows 2000, XP,VISTA, NT 4.0, MS-DOS

REFERENCES

* Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 2721)

Go to Search Parameters...

Brief Description

Two years of oilfield experience as floorhand, relief motorman and relief derrickman

5 years Exp in Artificial lift design and operations , production optimization , equipments sales and proposals

19 years of experience as a Camp / Accommodation-Facilities Management (Staff Welfare Operation and Maintenance) in Oil & Gas, EPCC, Company (Road & Bridge, Electro-Mechanical Contractor.

6 years of experience as Drilling Engineer for Major Operator company in Denmark (North Sea Project) and as Drilling Supervisor for operator company in Turkmenistan.

Planner, scheduler, Teamwork, time manangement, lead, excellent communnication

Twenty five years experience in ten manufacturing sites with four integrated major and three independent oil companies. Responsibilities include Unit Operator through Refinery Manager, and span operations, maintenance and technical departments. Steady promotion and career growth.

LPG,NAPHTHA,FUEL OIL, AMMONIA STORAGE TERMINAL AND UNLOADING FROM SHIP IN CALTEX-SPIC LIMITED,INDIA- LPG,AMMONIA STORAGE TERMINAL. UNLOADING FROM THE VESSEL USING RMCA UNLOADING ARM.

I'm Algerian, 37 years old 15 years experience in oil and gas field

Three Years Diploma holder in Mechanical with 5-years experience in an Oil & Gas E&P Inc. as "PRODUCTION OPERATOR", Seeking prospect to utilize my knowledge, experience, skills and exceptional ability for the post of "PRODUCTION/FIELD/PROCESS/FACILITY OPERATOR" in an Oil and Gas organization.

SAP knowledge,Material engineer,controller.Thorough knowlege of Isometric drawing,fabrication,material manual,and inventory.oil and gas field,gulf and offshore experience.

Monitor Equipments and Products to ensure the Plant runs smoothly

I have completed my graduation in mechanical engineering and parallel to that i did a diploma in industrial safety ( distance mode) . I am looking for a job in oil field as a trainee graduate engineer in the drilling department to begin my career as a drilling engineer

An MBA Finance with strong knowledge of Hedge Accounting and Derivatives valuations and experience with a Big 4 and Financial Software company.

Crawler Crane Operator

Air Separation Operator with 10+ years in the cryogenic field. Started in the Marine Corps and now working for a major bulk gas supplier, operating a 400 ton liquifier.

Fully qualified analytical chemist. 4 1/2 years experience in the offshore industry on a FPSO, offshore Angola. Recently promoted to supervisor.

I already have an expirience as a M/LWD Field Engineer during my internship program.

Over 6+ years experience in Content Management. Professional Proofreading, Editing, Writing, Documentation using various editing tools as Framemaker, Latex, MS-Word.

: 25 Years experience inLicensor selection for SRU / DCU/ HCU /FCCU/ DHDT/CRU units

I am petroleum engineer having more than six years working experience in oil and gas exploration and production company

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

Hard working, Honest, Reliable

My major responsibilities are Core Photography, Core Slabbing ,Core reservation and Storage Services ,Lithology rock description ,Real time monitoring of drilling parameters, preparation of formation evaluation logs, identification and classification of samples

Offshore Installation Manager with 25 years experience in the Oli and Gas industry

Development of Lab analysis procedure using ASTM, APHA, UOP & Shell reference methods to minimize the cost.

Deepwater Completions Consultant

5 years experience in obtaining Leases, title searching, etc...

Has the experience and skills required to manage, supervise, handle and monitor all job related aspects of Safety, Health and Environmental protection. Capable and knowledgeable in the process, development and application of different Safety measures that are vital in Offshore & Marine Safety,

Panel Operator or Senior Operator

Experienced New Technology Key Account Manager

PLC,SCADA,HMI/MMI,DCS,Temperature Instruments

Drilling Engineer with experience in drilling and completions operations in Saudi Arabia and South America (Exploratory wells, H2S and gas wells, directional and vertical wells up to 17000 ft)

I have thirty eight (38) years in the oil and gas industry as a Landman. During my career I have worked in over thirty (30) states here in the United States. At this point in my career I would consider myself a "Senior Landman."

Production plant operator

Supervisor, Health, Safety and Environmental. Responsibilities to include: asset management; quality, health and safety initiatives; implementing innovative solutions to practical problems; motivating and development of personnel.

MSc. Eng. (Canada); 17 years experience; Photogrammetry, Surveying, Mapping (all production aspects), GIS (ArcGIS/ArcSDE, MGDM); Production/Project Management, Software Development; System Design, Data Integration, Support, Training, Research, Geomatics

Offshore Experienced

I had more than 12 years experience in field of Instrumentation, through Maintenance, Project Engineering, Construction, Commissioning and Start up of Oil and Gas and Petrochemical Plant. (Off Shore and On Shore)

Experienced Refinery Operator

I have experiences gas plant, good skill, attitude and knowledge about the production process in Gas Company. I had experiences with acid gas (CO2 & H2S) removal by potassium carbonate absorption and MDEA absorption system, Regeneration absorbent, Dehydration unit, Gas chilling & Liquefaction unit.

M.TECH. in Applied Geophysics, Acquisition,Processing & Interpretation of Seismic data, 3-d modelling of subsurface,petrophysical interpretation,Attribute extraction,synthetic generation, Software Testing.

Advanced Process Control and Optimization: Multivariable Control Modeling, Inferential Modeling, APC Online tuning and commissioning and step testing. Product Honeywell Profit Suite. Process experience: VDU, heater pass balance and MSDW/HDT

Petroleum Engineering from Pune University/Sub Surface Open Hole Data Digitizer and Processor/Well testing, Sand filtration, Slickline/Production Technologist

I'm Geophysicist with 3 years field experience

11 years experienced field QC/Geophysicist, polish citizen, MSc diploma in physics, 2D and 3D land seismic prospect design, infield data processing - up to the time migrated 3D volume, shallow refraction and up hole programs, QA/QC of all aspects of seismic data acquisition.

Total Experience : Eleven years in Refinery & Petro-Chemical Industry

Dear sir, I have experience of unit start ups, shutdowns and commissioning. I have eleven years experience as a petrochemical operator. I have recently been working for a catalyst company which has included installing trays and filters etc.

One year of site investigation experience including gas & water monitoring, soil/water sampling/testing, drilling supervision (Rotary, Shell & Auger, Window and Non-window sampling), trial pit supervision, logging (BS: 5930). Also factual and interpretative report writing.

Graduated Professional Chemical Engineer I have many years project engineering experience and this in a number of positions and countries.

Environmental, permitting, regulatory compliance work. Mining, power plants, and transmission permitting work. Academic background in range science and ecology. Reclamation experience. Operations, corporate, and international experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out