Resume - Level 1 OGPO looking for work in northeastern B.C.

Misco Jobs

Resume #83537

CONTACT INFORMATION:
View contact information...

OBJECTIVE
I am looking to obtain an entry level position within your company. I am willing to relocate, travel, or stay in camp. I am a good trouble shooter and a hard worker and can adapt to work in any weather conditions. I hope to obtain a career within your company for many years to come.

EMPLOYMENT
Pure Energy
Production Testing Operator Sept. 08 – Present

As part of pure energy's production testing division I was responsible for the safe operation of a pressure vessel. As part of the job scope for testing I was responsible for monitoring the p-tank and wells during all phases of completions, this meant recording pressures and fluid levels within the p-tanks and on surface. I also am familiar with inline work, frac recovery, stimulation, snubbing, rig work and coil tubing work. I was also responsible for maintaining the p-tanks and all test equipment including line heaters, flare stacks and incinerators, manifolds and chemical injection equipment. I am experienced in the use of Barton meters and vortec meters, texsteam chemical injection pumps, and ESD systems.

Marcal Energy,
Field and facility operator Mar. 07 - Oct. 07

As a gas plant operator I worked for CNRL (Canadian Natural Resources Limited). I was operating a 6% sour site with a compressor, heat string, liner heater, and a glycol dehydrator. My duties included taking readings of the site along with the compressor and making sure it was all running smoothly, as well as keeping all support gear for the plant running. I also I operated 12 well sites. I was responsible for the daily upkeep of these sites including pigging of lines as well as keeping all chemicals for injection into the well topped up and produced fluid hauled out daily, Also log sheets on all wells and the compressor were to be emailed to our lead operator as well as the area foreman. I was responsible for the optimazation of all of our wells by using SCADA or ZEDI programs and am familiar with how they work. I am comfortable working under air and don't mind working alone. As operator we had to maintain these shacks and plants in accordance with the AEUB regulations.

Halliburton, Wellhead Isolation Tools Division 2005 - 2006
OPERATOR Hinton, AB

World renowned Halliburton hired me as one of the nine employees' for their WIT department. WIT (wellhead Isolation Tools) isolates the wellhead from treating fluids and pressures. I have learned outstanding trouble shooting and maintenance skills. I have also insured the integrity of their multi million dollar oilfield equipment.My duties included: The maintenance and rebuilding of our isolation tools. As well as maintaining of a 20 ton crane on a tri-drive Picker truck. Preparing the truck and tools for upcoming jobs. Dealing with consultants and company men.

Education

Harry Collinge High School
Grade 12 Diploma
2000-2005

Oil and Gas Production Operator Level 1 Certificate.
Currently enrolled in oil & gas production operator level 2 through NAIT.

Tickets
Class 3Q License
∙ H2S Training
∙ St. John First Aid & Level A CPR
∙ Petroleum Safety Training
∙ ATV safety training
∙ Ground Disturbance level 2
∙ WHIMS
∙ TDG (Transportation of Dangerous Goods Ticket)
∙ Fall Protection Training
∙ Wellhead Boom Truck Operator Apprentice Certificate
∙ OFA level 3 first aid w/ Alberta Endorsement
General Oilfield Driver Improvement course

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 2700)

Go to Search Parameters...

Brief Description

12 Years on offshore industry working with subsea installation of equipments (manifolds, suction piles, PLETS etc) and flexible lines in shallow and ultra-deepwater; subsea connections; pull-ins; remote and dive assisted interventions; inspections, maintenance and subsea repairs; stand alone equip

WITH profil of graduted technician in electromecanichs and an hight experience in petrochimical industry

Chem Analyst - Laboratory Technician

Working as Petroleum Engineer since 17 years. Engineer, Supervisor and Manager roles in drilling, wellcompletion, production and workover operations in oil and gas E& P .

Experienced oil and gas operations manager with proven record of production optimization, safety and personnel development. Experience in pipelines, gathering, compression, NGL, amine, automation, shale as well as conventional oil and gas operations including drilling, completions and workovers.

Type 65 wpm, Microsoft Excel, Microsoft Word, QuickBooks Enterprise, PowerPoint, Delorme XMap, excellent phone skills, highly organized work habits, accounts receivables, accounts payables, reconciliations, volume discrepancies, allocations, etc.

I am an enthusiastic dedicated person. I have the ability to work alone or in a team environment to complete any given task with utmost care and competency. Ensuring that all tasks are properly planned, to achieve the highest level of safety as so the tasks can be execute incident free

Time served Mechanical fitter with 20+years experience on a variety of petro-chem processes.DCS control room operator. PPO2 in processv technology. Nvq3 in mechanical fitting.

Project oriented, cost cutting manufacturing professional with 15 years of progressive experience in Procurement, Materials Management and Project Management. Specializing in Supply Chain management to include outside processing. Completed APICS certification courses in 2002. Passport obtained in

Free! I am an electrical engineer with over six years of professional experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, Computer Systems, and SCADA systems. Officially certified in Project Management by the PMI.

Diploma of Associate Engineer (Electrical) Working in boc gases as E&I shift engineer.

§ Over 12 years experience in offshore well cum process platforms in the Oil & Gas processing industry. § Extensive experience in production planning & process control room operations

ROV Supervisor with 15 years experience.

Dear Sirs, As you can see on my resume, all my experience is on Marine and Oil related Bussines, if any additional information is needed, please do not hesiate contact me.

Operate fractionation plant, lean oil extraction plant, refigeration plant, instumentation work, maintenance work.

I have total 24 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinary production supervisor, oil terminal incharege etc. I worked on various International companies.

Inlet gas system,TEG Regeneration and Treating system,Amine Regeneration and Treating unit..

Oil Drilling & Production (Quality-Inspection & Maintenance and Auditing)

HSE Training,Risk Assessement,Management,Field Safety,Loss Prevention

Level 1 OGPO looking for work in northeastern B.C.

Petroleum Geologist with 20 years international experience

stat engineer (oil and gas exploration) , drilling rig move fishing

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

Special Skills in DCS Operations

Electrical/Controls/Instrumentation Engineer, Commissioning and Design.

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.

Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.

U.S Navy Aviation Gas Turbine Jet Mechanic

Acquisition and title research

Having more than 9 years of experience in petrochemical, oil & gas process plants and utilities. Having experience in commissioning, pre-commissioning activities in Field, DCS & SCADA. (FOXPORO & Emerson Delta-V Systems)

33+ years in the oil and gas service industry. His portfolio includes (but is not limited to) field operations and supervision, sales, marketing, business development, and management.

Familier with oil refining process an simulations:HYSYS,Flare net - Familiar with CDU (Crude Distilation Unit) /VDU (Vacume Distilation Unit) /HCU (Hydro Craker unit) /NHT,Unifiner,CCR /LPG /VBU (Visbreaker Unit) /AMINE /SWS (Sure Water Stripper Unit) /SRU (Sulphur recovery unit)

Wireline senior field engineer

Proven General Manager, Asset Manager, M&A Evaluator/Negotiator

Drilling Engineer & Manager (on & offshore with deep water) some completions

I have total 9 years experience as production/process operator in the petrochemical industries.

Sales and Operations Officer targeting Productivity and Organizational Development

Production Engineer with strong IT skills and over 6 years experience in oil and gas production engineering and operations, with expertise in surface operations, plant start up, well services, planning, training, HSE coordination and community liaison.

British MSci petroleum geology 1998-2002

Well Service Supervisor or Coil Tubing Supervisor

Degree from "College for chemical technologies".

Solid organizing and planning skills

I have 2 years’ experience within the Upstream oil and gas industry. This has afforded me the opportunity to develop a good knowledge and understanding, of a Production background. I have recently gained a NVQ level 3 in Process operations and would like the opportunity to enhance my experience.

Monitoring production and running diagnostics on well performance, maintaining flow lines, scheduling and supervising wireline/swabbing programs, optimizing plunger lift systems, monitor pressure and flow readings, identify any safety or environmental issues.

Experienced Assistant Driller with 5 + years drilling in Wyoming for Nabors Drilling.

I have 8 yers exp in oil ands gas terminal opertions

To pursue a challenging position which enables me to utilize my communication and technical skills in providing professional knowledge and support to the Oil and Gas and Energy industry

I am currently working for Aker Kvaerner as a Production Technician on the Tiffany platform in the North Sea for the client CNRI UK, in the Tiffany, Toni and Thelma fields. Previous to this I was a CCR/production technician for Maersk Contractors on the FPSO Curlew a 50,000bbl/day vessel in the Shel

I have over 15 years in the production field and consider myself a specialist. I am confident that I can prove to be an asset to your company. I am an “out of the box” thinker, capable of solving problems on all levels.

Directional Drilling Engineer with 8 years of experience working with an important International Oil Service Company, also experience in MWD / LWD, directional well planning and directional drilling services coordination. High motivated, QHSE oriented

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out