Resume - 20 Years in Land seismics as field Geophysicist, assistant crew manager and Inst...

Misco Jobs

Resume #84283

CONTACT INFORMATION:
View contact information...

Age: 40
Nationality: South African
Languages: English and Afrikaans
Health: Very Good
Education: Matric with university exemption

Work experience:
Geoseis (Joint venture between Geco and Genmin in South Africa)
1989 to 1992, Worked as a data processor in the processing centre
1993 to 1997, Worked on crew as Field Geophysicist
Western Geophysical
1998 to 2000, Worked on crew as Senior Field Geophysicist
WesternGeco
2001 to 2002, Worked on crew as Senior Field Geophysicist
2003, Worked as START school instructor in Jebel Ali and Oslo
2004 to 2006, Worked on crew as Chief Field Geophysicist
2006 to 2008, Worked as Assistant Party Manager
2008 to date, Working as Land Geophysics Instructor, Abu Dhabi
Countries Worked in:
South Africa, 1989 to 1994
Botswana, 1994
Mozambique, 1995 and 1998
Egypt, 1998 and 2005 to 2008
Algeria, 1999
Oman, 1999
UAE, 2000, 2003 to 2004 and 2008 to 2009
Saudi Arabia, 2000 to 2001
Yemen, 2001
Chad, 2001 to 2002
Libya 2005
Terrain types worked in:
South Africa, Urban, bush land and savannah
Botswana, Savannah
Mozambique, Tropical
Egypt, Desert, subkha, delta and transition zone
Algeria, Very high sand dunes
Oman, Flat gravel plains
UAE, Big sand dunes
Saudi Arabia, desert and subkha
Yemen, Big sand dunes
Chad, Bush land
Libya, Flat plains and subkha
Recording Systems:
Aram 24
IO II
IO Image
Sercel 388
Sercel 408
WesternGeco Q Land system
Ancillary Systems:
Pelton ShotPro
Abem Terraloc seismograph
Oyo seismograph
Software used:
OMEGA 1.83 processing software
OMEGA 2.1 processing software
SPECS project design and management software
Imanage project design and management software
Testify source and instrument testing software
Pelton vibrator QC software.
ViewQC 32 source analysis software
Source types:
Vibroseis
Explosives
Gun Boat
Types of projects worked on and responsibilities:
Almost all of the work done in South Africa, Botswana and Mozambique was 2D work while all of the contracts I have worked on in Northern Africa and the Middle East have been 3D designs except for Chad which was 2D work.
While working in the processing center in South Africa, I was fully involved with processing and had no input at all in the acquisition phase.
As a field geophysicist, my main task was to ensure the integrity of the data and monitor the source effort performance. In the later years as senior and chief geophysicist, there was more emphasis on the design side and also how to best meet the client's objectives when faced with obstructions like oil field facilities, rivers, urban developments and the like.
I was not involved with the initial design from a bidding point of view, but once the contract has been awarded, then taking the pre-plot and converting it into a working model with offsets and infills to meet coverage and offset criteria was part of my responsibility.
I was also involved with processing the data up to field cube on all 3D projects. In Chad,
Yemen and Oman, the level of processing was increased to final migrated sections.
Two of the contracts undertaken during my time as Assistant Party Manager were dual source contracts. One was a small transition zone job on the Sinai Peninsular using vibroseis and gunboat while the second one was a flush drilling explosive and vibroseis job in the Fayoum Delta of Egypt.
As an Instructor in Abu Dhabi I was tasked with training field Geophysicists in three levels. (Basic, Intermediate and Advanced)
The basic training was aimed at Junior Geophysicists and focuses on the daily quality control tasks including source QC, instrument testing, creation of final SPS and other similar tasks. The Intermediate training focused on field level data processing while the
Advanced training covered survey design and project management.
Miscellaneous:
I have a full understanding of the following source techniques.
Slip Sweep
Maximum Displacement sweep
Independent Simultaneous Source
QHSE:
I have the full suite of QHSE certifications (53 QHSE training certifications) as per the Schlumberger guideline

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 2721)

Go to Search Parameters...

Brief Description

To provide leadership and capacity-growth in E&P Consulting (Technical Support Operations & Business Development) using cutting-edge Applications-technology skills, Information Technology & Information Management.

Engineering Graduate( B.Tech. Chemical Engg. – 4 years degree course) with 16 ½ Years Experience in Work Over Operations / Supervisor / Completion

I have over 30 years offshore experience and of those have worked in a senior position 25+ years, have worked in a senior position on some large scale sub sea completions worldwide, I have very good equipment knowledge and are looking for a shore base position with logistics or projects.

Over 35 years Drilling, Africa, ME, Russia, USA

SUMMARY I have been involved in the Drilling and Work over Industry for the past 26 years. With experience on Tender and Drill Ship & land rigs, both Mechanical and Electrical, ranging from 6,000 to 20,000 feet, as well as Sea crest and

Senior HSE advisor

I here by submit my application for the Toolpusher position in your esteemed organization. I posses about 19+yrs. rigorous, qualitative experience having been associated with leading oil exploring companies. I have experience in directional drilling & under balanced.

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

I am a Master Mariner, presently serving as Senior Master on Crude/Product Oil Tankers of Dynacom Tankers Management

Highly motivted, energetic,and judicious professional looking for employment with diversified corporation for long term employment. Strong attributes include proficiency and multi-tasking. Able to respond to global assignments and enjoy working in a multi-cultural environment.

OHSAS 18001, ISO 9000, ISO 14001, Operation troubles shootings DCS Control room operations. Plant start up & shut down activities.

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Presently working on board a Jack-up rig in Qatar (Noble Rig) since October, 2007 as SAFETY TRAINING SUPERVISOR (STS). 11 months worked on board same Jack-up rig in Qatar Offshore (Noble Rig) as Radio Operator / Trainee Safety Officer.Passed with Credit, NEBOSH INTERNATIONAL GENERALC

Piping Superintendent/Supervisor/Field engineer (PMT preference) Civil Engineering Diploma

Working as a field operator in NGL Fractionation Unit , Gas treating unit by MDEA, regeneration of amine and SRU Claus Process Unit for precommissioning, commissioning start up and operation. Operating knowledge of pressure and atmospheric distillation, furnaces for sulphur production, amine

Motivated drilling/completion engineer, with considerable hands-on experience and excellent credentials, seeks opportunity to perform at peak potential for an aggressive company. Has achieved a solid reputation for managing challenging technical operations efficiently and economically.

20 Years in Land seismics as field Geophysicist, assistant crew manager and Instructor

rig manager / toolpusher

Horz. Under balance Drilling is my best value.

Bachelor of Science(chemical) /Diploma in Industrial Safety/Diploma in Process control and Instrumentation

Over ten (10) years of extensive hands-on and supervisory experience in Operations and Maintenance, control and optimization of plant equipments, systems and procedures, control room and local operations of Diesel Power Plants operating through PLC - programmable logic controller. (Wartsila 18V32

Operation manager/Coordinator Fluids

sr mechanical engineer

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Lease Operator with 20+ years experience in Oil and Gas Operations.

I´m WSG, I´d worked in Mud logging services & Geochem Lab in Brazil more than 8 years, my last 3 years working in Argentina as WSG

28 safe years in the oi and gas/petrochemical industries. Worked in commissioning jobs throughout Canada and I am seeking an international placement with 28/28 rotation onshore

iadc certified drilling supervisor with 25 years experience in the oil & gas industry. Strong knowledge of all aspects of drilling in both horizontail & verical wells

My skills as a drilling foreman are Drilling, Work Over, Completion and Safety. I have 40 years of oilfield experience. I have an up to date Well Control Certification.

Looking for and Field Operating Position / Production Coordinator, Can also Well Service

I am writing to your goodselves wishing a reply to my present request. I would like to apply for the post of Production Operator or any other Board man . I enclose my resume with the name of referees.

Power plant project, O&M professional

12 plus years experience in the operation of various Hydrocarbon processing units located offshore (production platforms, and FPSO) and EPC company. My current position is that of Snr. Production Operations Lead with Sunlink Petroleum

I am a Mechanical Engineer from Madras University in the year 1981. I have over 18 years of Offshore oil fields experience in production Operations of oil & gas and water injection.

Experienced in land operations on small and large rigs. Team player. Works well in simultaneous operations to maximize results for the client. Speaks Spanish as well as mother language of English.

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

Safe, Reliable, Cost effective Supervision with 23 years experience

Hands-on Operational Management of Exploration & Development activities using Best Practices and BPI management skills.

Field Superintendent / Projects Start-up Leader with 30 years experience in onshore and offshore oil and gas production operations. Experience gained in working for major Oil Companies covering surface production operations, planning and training aspects

I have high energy level and eager to learn new skills ,I am very organized person and in my entire job I have organized my activity and other people activity.I can take responsibilities ,I am a customer focused and I have always met my deadlines.

Gas Plant Operator, Process Operator , Control Room Operator

Drilling supervision 13 yrs, 2 yrs DST, 16 yrs rig experince,12 yrs drlg. HPHT to 5000 m, short radius to long reach hz wells,cementing, fishing,coring,side tracks,re entries,tool setting,well control, sour to critical Sour 20%,Exp in completions,Supervision in Guatemala,Sudan,Nigeria,India,Canada.

Highly skilled and client motivated commissioning/operations technician able to work to Superintendent level and oversee many different nationalities of staff.

34 years in oil industry, toolpush and wellsite supervisor

Visionary professional with 11 years Operation experience in Oil and Gas plant, Petrochemical and Cryogenic plants

I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline

dcs panel operation for terminal and plant

Oil and Gas Production Operator, Lead Operator, workovers, Construction,inspections, repairs, trouble shooting, meter calibration, azcom, Hazmat, Confined spaces, Firefigting, water susvival, T-2, Dot, elicopter afety and fueling

I have a good management skills and experiences in various areas of operations. I am particularly aware of the Operation / construction / Commissioning and start up for Oil and Gas industries.

Over Fourteen and half years of experience in Petroleum Refining & downstream process, Petrochemicals and Chemicals in the Field of Continuous Process plant Operations, Troubleshooting and Commissioning. Well versed in Normal Operation and Unit revamps, Gross root & Expansion of Crude Refinery Erect

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out