Resume - Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engin...

Misco Jobs

Resume #84693

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
1. M.Sc. MECHANICAL ENGINEER (1982)
2. MBA (2009)
------------

Key Skills Summary:
1. Mining and Construction Equipment maintenance and repair management.
2. Petrochemical plant equipment maintenance and repair management.
3. Business analysing, evaluation capacity and plant development for new product.
4. Design and development of new product for manufacture.
5. Design and development tooling and fixtures for new product mass manufacture
6. Automation and speed up manufacturing process
7. Manufacturing process development and control.
8. Program and project management.
9. Cost estimation and control
10. Procurement and vendor management
11. Stakeholder and senior management communications
12. Tender and bid management
13. Technical design and documentation
14. Plant control and safety systems
15. Quality assurance systems ISO-2005.
16. Global operation strategic management implementation.

WORK EXPERIENCE:
------------
01/10/2008 – 15/06/2009

E+PC Engineering & Projects Company (PTY) South Africa
The AVENG Group
Division: Mineral Processing & Industrial

Contract Position: Lead Mechanical Engineer

Projects: Langer Heinrich Uranium Namibia

* Risk assessment for mechanical engineering deliverables
* Review mechanical engineering packages and report for rectifications to originator
* Multidiscipline inter phases checking and review after discipline engineers corrections
* GA drawings review and report for change note to be generated
* Mechanical Engineering Execution plan creating and review previous one for revisions
* Mechanical design criteria creating and review previous one for revisions
* Standard mechanical equipment specification creating, review and revision previous one
* Initiating IDC for all mechanical documentations related to a project
* Construction site assessment in mechanical engineering areas
* Identification, highlighting and recommendation to a Project and Engineering managers for the risk areas to be reviewed.
* Creating list of drawings for Engineering manager required for basic engineering documentation.
* Basic engineering documentation review and initiate IDC and revisions
* Initiate meetings between design office supervisors and discipline engineers
* Control of mechanical engineering deliverables for the project
* Adjudication vendor's technical and commercial proposals and report to a Project manager.
* Creating RFQs and requests for technical proposals and GA drawings from vendors and communication on key mechanical engineering issues with vendors.
* Review detail engineering WBS and reports for additional documentation if required
* Review and initiate changes to WBS for mechanical equipment deliverables in accordance with vendors schedule
* Planned alternative action to archive delivery of mechanical engineering services in accordance with project plan.

01/02/2008 – 01/10/2008

TENOVA – Pyromet South Africa – Italy - Russia
TENOVA Group

CONTRACT POSITION: Senior Projects Engineer – Deputy Project Manager for CIS Region and Russian Federation
(Report to the Group Projects Director)

Project: Revamping Nickel Smelter for Norilsk Nickel Polar Division in Russia
(Value: Started as R 1 billion with extension to R 2, 5 billion)
Customer: NORILSK NICKEL (NN), MECHEL

Service and duty:
* Mining smelters and metallurgical plant assessments in CIS countries
* In accordance with customer requirements lead technical proposals creation review and translations.
* Lead presentations to the Customers in Russia.
* Create Project Plan.
* In accordance with project contract schedule create and control planning activity WBS, Gantt chart etc.
* Project budget cost verification and implementation control plan.
* Together with QA manager create QA Plan.
* Project implementation risk assessment review
* Control and review design and development of basic engineering for the project.
* Control of compliance all project's engineering documentations with Russian Federation norms and standards such as GOST and SNIP.
* Lead engineering review meetings with the Customers.
* Project detail engineering control and review management.
* Managing construction technical documentation presentation and approval by Customers
* Managing procurement activity for the project to meet delivery dates.
* Control manufacturing activity for the project and progress review reports.

01/06/2007 – 01/02/2008

JOY MINING MACHINERY (South Africa)
JOY GLOBAL Inc. (USA) Company

CONTRACT POSITION: Product's Engineer – Project Manager

Project: Dust control for underground coal mines in South Africa (Value: approximately R 10 million).Feasibility study project for improvement scrubber system on Joy Mining Machines operating in South Africa.
Customer: Anglo – Coal
* Design and development of test facility for testing Joy Scrubbers
* Erection and commissioning tests results evaluation and recommendations for Joy Design office in head squatter USA for design new scrubber system, which will complied with South African health and safety regulations (2005) for underground coal mining.
Service and duty:
* Underground mining machinery design and development.
* Projects engineering.
* After market product support.
* Old designed machines upgrading.
* Re-builds sales order creating and control.
* Dust control in underground mining research and development project leader.
* Project Management.

01/10/2006 – 01/06/2007

ZEPPELIN INTERNATIONAL(GmbH) – ZEPPELIN UKRAINE MINING
EXPATRIATORY MINING CONTRACT
CONTRACT POSITION: Caterpillar Regional Product Support Manager
(Report to General Director of Zeppelin Ukraine)

Project: Supply and MARC (Maintenance and Repair Contract) development for Caterpillar fleet for MITTAL STEEL new mining operation in Ukraine
(Value: approximately R 1 billion)
Customer: MITTAL STEEL GLOBAL (U.K.)
Service and duty:
- New mining development mechanization consultant.
- Calculation productivity and quantity of required Caterpillar machines for the operating fleet in accordance with customer mining applications.
- Translation all technical documentation from English to Russian and presentation all advantages Caterpillar product across competitive market shear products in the world.
- Review of all new orders configurations for Caterpillar machines before ordering from Caterpillar factory in USA.
- Caterpillar product's support expertise.
- Technical advising and assistance Zeppelin Service managers with MRO (Maintenance, Repair, Overhaul) for the full range of Caterpillar models.
- Recommendations to General Director and Service managers about CRC (Component Rebuild Center) functions and necessity for creation one in the region.
- Caterpillar MARC (Maintenance And Repair Contract) development.
- Advance training on Caterpillar software such as Caterpillar Builder and Caterpillar Calculator.
- Technical and engineering consultancy regional service managers for trouble shooting on Caterpillar machines.

01/10/2003-01/10/2006
GIRLOCK BRAKES S.A. (Pty) Ltd., Johannesburg, South Africa
(TRW Group) (Leading in automobile brake technology)

PERMANENT POSITION: Senior Mechanical Engineer – Project Manager.
(Report to C.E.O)

Project: Design and development full set of tooling for new product development such as dram brake components manufacture such as brake shoe for new models development, adjusters, levers, back plates, dust shields and other automotive components.
Customer: TOYOTA Japan, NISSAN Japan, TRW Global
(Value approximately R 50 million)
Service and duty:
* Design and development full set of tooling for new product development such as dram brake components manufacture such as brake shoe for new models development, adjusters, levers, back plates, dust shields and other automotive components.
* New design concepts introducing and development industrial tooling for the localization projects.
* Projects costing and control.
* Testing and tryouts of new tooling.
* Correction and producing the samples of new product for approval by OEM (Original equipment manufacture).
* Liaison with tooling manufacturing companies as well as tool steel suppliers and heat treatment control.
* Planning and QA/QC on new developed tooling.
* Project Management.
Project manpower capacity under my management: 10 toolmakers, 1 foreman,
1 technician, 1 draftsman, 2 machine setters.
And 6-sub contract companies with average of 100 employees.

01/02/2002-01/10/2003

BARLOWORLD-EQUIPMENT Johannesburg, South Africa
CATERPILLAR Africa
DIVISION: Mining Equipment

PERMANENT POSITION: PROJECTS MECHANICAL ENGINEER

Service and duty:
* Maintenance planning for servicing earth moving equipment.
* Design and drawing of new mechanical components for manufacture.
* Control of manufacturing implementation of new mechanical and hydraulic parts for Caterpillar machines.
* Installation control of new components.
* Start up and testing expertise.
* Failure analysis. Problem solving. Report writing.
* Developing and implementing new maintenance and repair process.
* Audit suppliers of components.
* Handling of customer complaints, warranty claims and implement /recommended corrective action.
* Repair organization of the fleet. Responsible for maximum fleet availability on time.
* QA and Safety codes of practice implementation.
* Customer Support Agreements Analyses for all mining sites in Southern Africa.
* Analyses financial data using latest MS EXCEL, corrections and reports generation.
* Submitting reports to the financial management.
* Sites Audit.
* Creating budgets for machines for all fleet in South Africa according to MARC (Maintenance and repair contracts).
* WBS (work brake down structure) creating for all projects in Southern Africa as per Caterpillar machines family.
* Budget, cost and revenue analyses and reports generation for all sites in Southern Africa.
o Projection Assumptions regarding interval, cost, duration and labor hours that Customer Support Agreements Analyses uses to project future cost, duration and labor hours.
o Components change out Management analyses projections and reports.
* Analyses Mechanical Availability, Utilization, Fuel Consumption, Payload.
* Budget Cost vs. Actual analyses and reports.
* Residual Value in Components for each machine at the end of contract determination.
* Contracts Cash flow and Contracts Investment Analysis and reports.
* Residual Value in Components for each machine at the end of contract determination.

01/01/2000 – 01/01/2002

AIRGAS COMPRESSORS South Africa, Johannesburg
AERZEN Group

PERMANENT POSITION: Manufacturing Manager – Petrochemical Plant Equipment Projects Manager

Joint venture with Krupp Engineering GmbH
Project: Revamping Polifin South Africa after explosion.(Value approximately R 50 million AIRGAS portion)Project: Erection of Compressor house for Anglo – platinum smelter
(Value approximately R 50 million AIRGAS portion)
Customer: Krupp Engineering GmbH

Service and duty:
* Head of production and manufacture department for manufacture compressors and root blower units for industrial pipelines and customer applications.
* Process plant projects equipment supplier for Polyfin Plant, Petrochemical industry.
* Control of process plant equipment installation and projects managing for Polyfin Plant (SASTECH S.A).
* Projects QA/QC documentations and expediting.
* Create and control all projects documentations on PC electronically as per ISO 2001 and SASOL QA.
* Design and development equipment and components for local manufacturing.
* Manufacturing drawings checking and approval.
* Cost control and projects cost estimating.
* Quotations draw, tenders placing liaison with customers and contractors.
* Audit and selecting components sub-suppliers for multi millions Rand projects.
* Production planning. Projects planning and scheduling manufacturing process and delivery time to construction site.
* Certifications of vessels under pressure together with authorized inspections and making documentations on it for approval by SASOL QA and mining (MIQS) and customers engineering departments. Gas systems audit and commissioning of systems under pressure.
* NDT Tests analyzing and approval for vessels under pressure.
* Vessels under pressure design and development for production based on prototype from Germany.
* Project Management.

Production department manpower capacity under my management: 5 artisans, 1 foreman, 2 boilermakers, 1 draftsman, 5 assemblers of new machines on line.
And 6-sub contract companies with average of 50 employees.

01.08.1996-01/01/2000

TURBOREP – Demag De Laval Southern Africa, Johannesburg, South Africa.
Mannesmann Group
SIEMENS Power Generation Global

CONTRACT POSITION: Turbo machinery Mechanical Engineer

Projects: Gas Turbines and DEMAG turbo - compressors power unit design, erection and commissioning
Various GAS Turbines houses Global projects (value from R10 to R100 million projects)
Customer: Rand water board, Anglo-Gold, AMPLATS, SASOL, POLIFIN, NATREF
Service and duty:

* Re-design turbo-machinery and hi-speed rotating components for manufacture and installation presently running machines worldwide.
* Checking and correcting drawings.
* Reverse engineering.
* Modular structuring turbo-compressors and turbines.
* Design valves and an accessory for existing turbo-machines.
* Design gearboxes for rotating equipment.
* Modification of components for re-placement and spare parts.
* Design white metal bearings for high speed rotating equipment.
* Create manufacturing and maintenance process for repair machines.

01.02.1994-01.08.1996

ELCA ENGINEERING (PTY) Southern Africa, Vanderbijlpark, South Africa.
The GHH Group
DEPARTMENT: TURBINES & TURBO-COMPRESSORS

CONTRACT POSITION: Rotating Equipment Mechanical Engineer

Projects: Gas Turbines and DEMAG turbo - compressors power unit design, erection and commissioning
Various GAS Turbines houses Global projects (value from R10 to R100 million projects)
Customer: Rand water board, Anglo-Gold, AMPLATS, SASOL, POLIFIN, NATREF

Service and duty:

* Old mining equipment re-designs for refurbishment.
* Re-design all type of damaged and used industrial turbines and turbo-compressors for complete re-manufacture and re-installation.
* Involved in design of Heat exchangers and Vessels under pressure.
* Making manufacturing drawings for turbo-machinery components such as: impellers, shafts, turbo-blades, white metal bearings, couplings, balance pistons, H.P. seals, nozzles, all type of valves and pumps, interstage diaphragms, installation frames.
* Modular and re-structuring industrial turbo-compressors and turbines.
* Maintaining procedure creating for repair turbo-casings.

02.01.1992 – 01.02.1994
MOURIK (PTY) Southern Africa.
MOURIK Inc. Holland

CONTRACT POSITION: OIL – GAS (Downstream) PROJECT ENGINEER.

Project: Sectional Revamping SASOL -2 South Africa
(Value approximately R 100 million)
Customer: SASOL
Service and duty:
* Design and build up automatic combustion machine for cleaning petrochemical plant by high-pressure water technology, such as Heat exchangers and Vessels under pressure for SASOL - 2
* Design and build hydropower packs for special equipment for construction.
* Supervise start up, implementation of equipment in action as well as corrections.
* Setting up equipment in action and training operators.
* Project Management.

RSA South Africa

01.05.1987 – 01.10.1991

UKRAINIAN NATIONAL CONSTRUCTION MACHINES MANUFACTURE RESEARCH AND DEVELOPMENT ROADS CONSTRUCTION TECHNOLOGY INSTITUTE. (ACADEMY OF SCIENCE AND RESEARCH USSR), Kiev, Ukraine

DEPARTMENT: NEW EQUIPMENT DESIGN PROJECTS, IMPEMENTATION AND INSTALLATIONS FOR NEW BUILDING TECHNOLOGY MECHANIZATION.

PERMANENT POSITION: PROJECTS LEAD MECHANICAL ENGINEER.
Service and duty:
* Design, research and development equipment for building and maintenance national roads.
* Process plant mechanization for roads building material manufacture in East Europe, Far-East, Central Asia and Middle East.
* Design, research and development machines and equipment for concrete re-moving and transportation with re-surface and re-enforcing by high pressure water technology.
* Design, research and development HP nozzles, accessories for HP pumps, valves, guns, piping and combustion equipment for concrete re-moving and re-enforcing by high pressure water technology.
* Working on PhD dissertation for solving World wide problems of cavitations of water processing up to 2000 BAR pressure in the piping circuit and closed vessels under high pressure.
* Design, research and development equipment to use water as a cutting tool for concrete removal, re-enforcing, concrete bridges maintenance and steel industry.
* Design, research and development mechanical components for hydro dynamics improvements of turbines working in hydro power stations as well as turbo-vanes structure for centrifugal pumps in research process of water power and property.
* Project Management.

01.09.1982 – 01.05.1987

UKRAINIAN NATIONAL DEPARTMENT OF MECHANIZATION AND MECHANICAL ENGINEER'S SERVICES FOR AGRICULTURAL MACHINES DEVELOPMENT, NATIONAL DISTRIBUTION OF MACHINES AND EQUIPMENT. (Named as "National Selhoztechnica") Kiev,Ukraine

DEPARTMENT: NATIONAL AGRICULTURE MECHANIZATION AND INDUSRIAL DISTRIBUTION.

DIVISION: KIEV REGIONAL MACHINERY MAINTENANCE AND INDUSTRIAL DISTRIBUTION.

PERMANENT POSITION: REGIONAL ENGINEERING MANAGER //01.09.1985 – 01.05.1987//
Service and duty:

* Managing Team of engineers, technicians and parts warehouse staff.
* Development and implementation departmental procedure and system of standards.
* Development and implementation maintenance and repair technology.
* Planning maintenance and control.
* Divisions warehouse equipment's spare parts minimum stock control.
* Stock takes managing.
* Planning and approval minimum stock for the year.
* Control planned distribution of spare parts and components to the branch countrywide.
* Administration and HR selection for the projects.

In 1986 our division team were heroically stand by day and night and supply rescue teams at Chernobyl nuclear power station disaster!
Department manpower capacity under my management:
Directly reported to me in the office: 3 mechanical engineers, 1 PA, 2 warehouse managers, 7 warehouse supervisors, 1 forklifts department manager, 12 warehouse workers.
Reported from 25 branches in Kiev region:
25 site engineers region wide, 50 workshops foreman region wide and 25 technician.
25 warehouse managers.
#Reason for leaving: PhD Dissertation

EDUCATION & CERTIFICATION:
- 06/2006 – 06/2009 MBA (Master's degree in Business Administration)
UNIVERSITY: MILPARK BUSINESS SCHOOL (South Africa)

- UNIVERSITY: WITS South Africa, Johannesburg – CAMBRIDGE LANGUAGE COLLEGE (1 YEAR)
GRADUATED IN 2006, A BUSINESS ENGLISH COMMUNICATION.

- 1977 – 1982 FULL TIME LIVE IN
- UNIVERSITY: Moscow State University of Agricultural Engineering
GRADUATED IN 1982, Master's in Science of MECHANICAL ENGINEERING
------------
NATIONALITIES: South African Citizen; Citizen of Russian Federation
Work permits: Russian Federation, Ukraine, CIS countries, Canada in process
Business Communication Ability:
ENGLISH – FLUENT
RUSSIAN – FLUENT
UKRAINIAN – FLUENT
GERMAN-BASIC
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 2721)

Go to Search Parameters...

Brief Description

I am a dedicated and hardworking Materials Coordinator / Controller with an excess of 10 years experience in oil and gas industry.

Enviromental Geological Engineer and Regulatory Affairs Manager

I am an environmental professional with 20+ years of experience in private industry, county government and non-profit marine research. Areas of expertise include management and development of technical and non-technical staff; development of outreach programs, budget planning and management.

M.Sc. (Geology),Reservoir Simulation, PVT analysis, EOR, WSO, Data Management, Reservoir Field Operations, Well Test Analysis, Material balance, Field monitoring.

I have long work experience in both tech and service related positions. Such as liner man on the countryside, - an all-weather work, -digging and raising telephone piles. Connecting telephones and represented company in peoples homes.

Geologist

Process modeling simulation using "ASPEN HYSYS".,Pipe line design, sizing and optimization with relevant safety requirements,Knowledge of Codes & Standards, Piping engineering

Award-winning, highly accomplished and motivated professional with over all four years of proven track record of rapport-building, resourceful problem-solving, communication skills, also with substantial experience in Techno-managerial capacity.

male, 28 age years old. I have worked for Schlumbeger as Coiled tubing Field Engineer from 2000-2003. Now I work in Malaysia as a Coiled tubing consultant for Schlumberger.

Experience Cementing supervisor with most training abroad

I would like to work as Process/Project Engineer/ Instrument and Control system Engineer in the oil & gas, Water, Paper, Mining, Food, Sugar, power plant, railway department or any other industry where I can utilize my extensive skills and experiences in a range of industries.

Construction Manager in Harbour and river construction, Offshore construction, Marine works, Land fall pipe installation, Dredging, Post trenching, Pipe laying, Tie in, Diving

I have attented Nigerian breweries one year technical training and i obtain necessary engineering skills in my studies as well in my higher school of learning

- Skilled Control Panel Operator and Area Operator

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

PP with 9 years industry experience in Niger Delta, GOM and North Sea provinces. Both studies and operations oriented in core PP skills ranging from quick look/detailed and field reviews. Input to well proposals, workovers and FDP’s. Worked with Shell, Halliburton, BP and Baker Hughes

I am seeking a position that maximizes the education and experiences that I have attained during my time at USMMA and working for Tidewater. The leadership, seamanship and engineering, dynamic positioning, human relations, and adaptation skills that I have developed, make me an ideal candidate.

Seeking full time employment with an oil company who needs a Loader Operator.

Safety Engineering professional with Oil and Gas Exploration and Production background, seeking a position as HSE Engineer in Offshore O&G Industry.

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Scolecodontologis specialist

I am a loyal, hard working team player and enjoy exceeding targets. I continually persevere to achieve the best possible results in what I do and am motivated by achieving and being successful. OOW Deck II/1 (CoC)

Well test supervisor

Well testing technician

Working in the oil&gas industry since last 15 years(11y ears in abroad) working as a Sr. Commissioning operator.

I am engineering graduate in Mechanical from Shadan College Of Engineering, JNTU, India having around 7 years of experience in the field of Electronics/Mechanical related with Projects/Maintenance. I joined Saudi Perfume and Cosmetics Industry-Jeddah, one of the largest manufacturer of perfume.

Instrument Supervisor

Over 20 yrs of exp in upstream O&G. 7yrs offshore, from construction of offshore platforms, hook up and commissioning through to start up and steady state production. Strong HSE focus (previous role in charge of offshore platform), strong hardware completion and handover exp. LNG experience.

I WISH TO APLLY FOR THE POST of a Field Engineer. Every other Information about me are contained In my cv below

Present Assignment: Specialist – MTBE Operations Department MTBE Malaysia Sdn. Bhd.(From April 2001 – Till date) (a wholly owned subsidiary of Petronas Malaysia)

I have worked on oil and gas rigs for 8yrs. I have worked floorhand, motorman, Derreks, asst driller. I know how to work on motors and diesel motors. I know how to weld.

Oil and gas exploration consultant with twenty years worldwide experience seeks project, contract, or position

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Environ and social impact expert, sustainable development project planner, monitoring and evaluation, stakeholders mgt, computer literate, B.Ag econs, M.sc, Ph.D (Rural sociology)

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

I can work floors, motors, and derricks.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

All qualifiations are posted on my resume exept that i have a passport.

Enthusiastic, results-oriented geologist with experience in mineral/oil & gas leasing programs

Service, Manufacturing, & Equipment Manager (General Mgr / Operations Mgr)

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Retail supermarket management operations: employee relations, customer service, safety, inventory levels/ordering, profit/loss, legal requirements, building maintenance

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

Measurement & logging while drilling operations with steerable tools; Drilling services ƒæ Logging while drilling with resistivity tool in deepwater operations ƒæ Logging while drilling with Neutron and Density tool, use of Radioactive sources ƒæ

Field Engineer - UBD

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out