Resume - Experiences as QA/QC inspector and Welding in the Inspection sector at various ...

Misco Jobs

Resume #84731

CONTACT INFORMATION:
View contact information...

EXPERIENCES AND EXPERTISE

INSPECTION, TESTING AND CERTIFICATION
1.Capable in Quality control of fabrication, installation, quality control/assurance of non-destructive test for oil & gas production, Floating Production Storage Offloading FPSO, off shore platform, pressure vessels, heat exchanger, boiler, pipeline, piping welding inspection, OCTG inspection, Wellhead & Christmas tree inspection.
2.Capable for technical review of document, WPS, drawing and field inspection of pressure vessels, storage tank, process piping, pipeline, flow line and off shore platform.
3.Familiar with international standard and codes such as: American welding Society (AWS), American society of Mechanical engineer (ASME), American Petroleum Institute (API), ANSI, British Standard, NACE and other codes.
4.Capable to operate non-destructive test non-radiation and interpreting film of Result Radiographic test

MANAGEMENT SYSTEM
Development, review, implementation and auditing of:
-ISO 9001:2008, Quality management system latest edition
-OHSAS 18001:1999, Occupational health and safety management system
-Indonesia Industrial Safety and Health regulation Ministry of Manpower requirement No. Per 05/MEN/1996, Health and Safety management system (SMK3)

PROFESSIONAL SOCIETY MEMBER:
-Singapore Welding Society member No. SWS ¨C F 2191
-Certification Body for Indonesia Inspection Company Association (BS-APITINDO) as Assessor

PROFESSIONAL TRAINING & SEMINAR ATTENDED:
-CSWIP 3.1 certification course on 13 to 18 April 2009 TWI UK - TWI Sea Kuala Lumpur waiting result and certificate.
-Quality Management System QMS ¨C Upgrading ISO 9001:2008 by ISC ¨C RABQSA Australia, February 2009. Cert. No. QM-09237
-STOP ( Safety Training Observation Program) conducted by HSEQ Prosafe Production Services
-PTW Permit to Work training in FPSO installation by Prosafe Production Services Pte.ltd
-BOSIET including EBS, Fire fighting & Self rescue and HUET with EBS conducted by SMTC Global Singapore approved OPITO
-Train to Trainer course by DTT Malaysia and DUJ Batam June 2008
-Improving Quality of Welding Based on International Standard (International Institute of welding ¨C IIW Guidelines) by Germany Welding Institute Mannheim and University of Indonesia.
-Internal Audit Quality Management System ISO 9001 Training, Conducted by PT.GKS
-Internal Audit OHSAS 18001:1999 Occupational Health and Safety Management Systems conducted by PT.GKS
-Radiographic Interpretation Course CSWIP 3.4
TWI Kuala Lumpur August 28 thru Sept 1, 2006, Certified as CSWIP 3.4 Inspectors
CSWIP CERT. NO. 26527
-Awareness ISO 9001: 2000, By Velosi International Sdn Bhd, Malaysia, August 21, 2005
-Expediting In house Training, October 2003, MODY INTER INDONESIA
-Welding Inspector Course, July 14 to September 14, 2002, Certified as Welding Inspector
-Magnetic Particle Testing Re-certification, August 22, 2002,Certified as MT Level II (two) ASNT Inspector
-Ultrasonic Theoretical and Practical Course for All Configurations, September 12 to 27 1994, Certified as UT Level II (two) All Configuration ASNT.
-Magnetic Practical Testing Training Course. November 29 to Dec 11, 1993,
Certificate and Certified as MT Level II ASNT Inspector.
-Dye Penetrant Testing Training Course for Industrial Application, October 25 to Nov 10, 1993, Certified as Dye Penetrant Level II ASNT Inspector

JOB DESCRIPTION:
Job Description which were become responsibility before, during and after commencement of the project include and not limited:
* Attending Pre-Inspection Meeting / Kick off Meeting
* Material Inspection
* Performed Welder Qualification Test and Procedure Qualification Test
* Inspection of Fit Up
* Recording of welding parameter
* Welding visual inspection
* Dimensional check
* Monitoring fabrication structure, mechanical equipment, pressure vessels, various piping both onshore and offshore
* Inspection, monitoring and witnessed NDT, Positive Material Identification (PMI), Function Acceptance Test (FAT), Chemical cleaning, Hydrostatic Test, Blasting and Painting.
* NDT supervision including review radiographic films
* Monitoring PWHT including review PWHT chart
* Review calibration certificates of equipment used
* Reviewed Test package and final dossier for Structural and Piping.
* Issued Non Conformance Report during fabrication (if necessary)
* Issued Punch List
* Preparation of QA/QC Documentation

WORK EXPERIENCES:

PROSAFE PRODUCTION SERVICES Pte. Ltd
International Business Park - SINGAPORE
August 2008 to Present
POSITION ; Quality Control Supervisor report directly to Project Quality Manager

Duties
* Supervision in quality control matter for fabrication and hook up of mechanical equipment, piping, welding and structural.
* Develop necessary project inspection procedure, quality procedure and maintain company Quality document
* Coordinating and monitor all project inspection activities and quality control both onshore and off shore.
* Ensuring that the personnel who are allocated to their specific areas work in accordance with the safe working / HSE procedure.
* If Necessary conduct vendor assessment and inspection to make sure both vendor and equipment which fabricated meet company requirement

QA/QC Job Responsibilities.
To supervise and perform inspection, monitoring, verification, review and witness test according technical specification, applicable standard / code and procedure / work instruction meet client requirements.
Type of Equipments: Compressor module, Process and Separator module, Glycol Module, MCC module, Filter Skid and Fuel Gas Skid.
PROJECT ASSIGNMENT
-As QA/QC Supervisor Espoir Ivoirien FPSO Upgrade Project phase 1, Ph. 2 and Ph. 3. As per DNV classification, ASME VIII, ASME B 31.3, AWS D1.1 and Client specification.
IVORY COAST ¨C WEST AFRICA.

PT. BUREAU VERITAS INDONESIA
Jakarta ¨C Indonesia
June 2008 ¨C August 2008
POSITION ; Inspector representative
Duties
¡ñ Inspection according correspondence requirement
¡ñ Maintain client relation
¡ñ Undertake any other activities and any other reasonable job, as directed and required by Bureau Veritas

PROJECT ASSIGNMENT
-As Client Representative on behalf TOTAL E&P Indonesie for Gas Fuel Package Tunu North Ph. 11 fabrication as per ASME VIII and Client specification at SM0E & Profab Batam.
-As Client representative ENI Australia for Pressure Vessels Black Tip Project as per Australian standard AS 2885.1 applies for design & fabrication code of Pig receiver at PT Heat Exchanger Indonesia Batam.

PT. DUA UTAMA JAYA
Batam ¨C Indonesia
Nov. 2007 to June 2008
POSITION ; Senior Inspector, Inspection coordinator, Welding Engineer
Officials Duties
Directly Report to Operation Manager.
¡ñ Coordinating all inspectors and monitor all Projects inspection activities and quality control.
¡ñ Maintaining all document control system in company.
¡ñ Coordinating all inspection activities being under taken in their areas.
¡ñ Ensuring that the personnel who are allocated to their specific areas work in accordance with the safe working / HSE procedure.
¡ñ If Necessary and recommended as Client representative at site or fabricator.

QC Responsibilities.
To perform inspection, verification, review and witness test according technical specification, applicable standard / code and procedure / work instruction meet client requirements.

PROJECT ASSIGNMENT
-As Client Representative Inspector on behalf Prosafe Production Services Pte. Ltd for Espoir Ivoirien Project 183-V056, Module and Pressure Vessels (Separators, Glycol Contactor, Suction Scrubber and Piping) fabrication as per DNV classification, ASME VIII, ASME B 31.3 Power Piping and Client specification at Profab and Transalindo Batam.
-As QC Project coordinator for Lifting test Heat exchanger cooler SU TU VANG Jord International Pte Ltd.
-As Third Party Inspector MIGAS for WPQT and WQT Total Tunu Phase 11 & 12 Construction and fabrication of structural as per AWS D1.1, Total spec. GS STR 301, GS STR 201 and Migas regulation at Sembawang Marine Offshore Engineering, Batam

PT. GERBANG KRENINDO SAKTI
Jakarta ¨C Indonesia
Dec. 2006 to Oct. 2007
POSITION: Senior Inspector and Operation Manager
Official Duties:
Directly Report to Operation Director.
¡ñ Coordinate all inspectors and monitor all projects inspection activities and quality control.
¡ñ Maintaining all document control system in company.
¡ñ Coordinating all inspection activities being under taken in their areas.
¡ñ Ensuring that the personnel who are allocated to their specific areas work in accordance with the safe working / HSE procedure.

QC Responsibilities.
To perform inspection, verification, review and witness test according technical specification, applicable standard / code and procedure / work instruction meet client requirements.

PROJECT ASSIGNMENT
-As TUV Rheinland Indonesia Inspector Representative for Schneider Kessel Germany of Waste Heat Recovery Boiler at Asahi Mas Chemical Plant as per EN 12952 ¨C EN 12953 and Pressure Equipment Directive.
-As Third Party Inspector MIGAS for WPQT and WQT Total Tunu Phase 11 & 12 Construction and fabrication of structural as per AWS D1.1, Total spec. GS STR 301, GS STR 201 and Migas regulation at Sembawang Marine Offshore Engineering, Batam
-As Third Party Inspection for fabrication of casing servo Hydraulic Pump Jatiluhur Power Plant
-As Third Party Inspector for TUV Rheinland Indonesia, for Resistance Blast film glasses Inspection for Germany International School, Indonesia Project.
-As Third Party Inspector for TUV Rheinland Indonesia, Certification & Inspection for Germany International School Installation, Indonesia Project.

PT. JAVA VELOSI MANDIRI (Velosi Int'l Sdn Bhd)
Jakarta ¨C Indonesia
March 2005 to November 2006
POSITION: Senior Inspector & Operation Manager
Officials Duties:
Directly Report to Operation Director.
¡ñ Support for all operational of Jakarta office, technical and administrative support to projects including correspondence with client, vendor and world wide Affiliation Company.
¡ñ Coordinating all inspectors to monitor all inspection activities and quality control.
¡ñ Maintaining all document control system in company.
¡ñ Coordinating all inspection activities being under taken in their areas
¡ñ Ensuring those inspectors are aware of all quality requirements for each project are in possession or have access to ensuring that inspectors progressively inspect fabricated items and seek approval by the client / third party for systematic sign off.
¡ñ Ensuring that the inspectors monitor receiving activities to ensure compliance with procedural and client requirement.
¡ñ Ensuring that the personnel who are allocated to their specific areas work in accordance with the safe working / HSE procedure.

QC Responsibilities.
To perform inspection, verification, review and witness test according technical specification, applicable standard / code and procedure / work instruction meet client requirements.

PROJECT ASSIGNMENT
-As Inspection Coordinator for BP Tangguh DCU 0065, Oil Country Tubular Goods, Wellhead Equipment and X-Mas Tree Drilling Equipment Project. As per API 5CT and API 6A
-As QC Client Representative / seconded Behalf Biothane Asia Pasific BV Netherland for BP Zhu Hai EGSB Settler fabrication include FRP Filter. As per AWS D1.1 & client spec.
-As QC Representative Coordinator / seconded behalf Hyundai Engineering for pressure Vessels Suban Phase 2 Conoco Phillips project. As per ASME sect. VIII and Client spec.
-As Client Inspector representative KOC for OCTG project at Imeco Inter Sarana batam, Hydrill Csg 22 7/8 R3.
-As Client Inspector Representative /seconded for Pressure Vessel inspection for KBR Escravos project. As per ASME sect. VIII and Client spec.
-As QC Client Representative / seconded behalf Goro Nickel Australia for Fiber glass Reinforced Pipe Vinylester Piping Systems Project as per 15 LR App. B, ASTM D2583, D2584 and client specGCT01-000-8440-SP006
PED (Pressure Equipment Directive)
-As QC Client Representative behalf Biothane Asia Pasific BV Netherlands for EGSB Settler fabrication include Fiberglass filter As per AWS D1.1 & client spec.
-As Client Inspector Representative for Pressure Vessel inspection for Agip KCO Kazakhstan, Petrofac JI 176 Kashagan Development project. As per ASME sect. VIII and Client spec.

PT. MODY INTER INDONESIA (Moody international)
Jakarta ¨C Indonesia
February 2005 to March 2005
POSITION: QA/QC Inspector
QC Responsibilities.
To perform inspection, verification, review and witness test according technical specification, applicable standard / code and procedure / work instruction meet client requirements.

PROJECT ASSIGNMENT
-SHELL REFINERY GEELONG AUSTRALIA Ltd as Client inspector Representative/seconded for Catalyst Cooler E 5311 A Fabrication,. As per Australian Standard AS/NZS 1210 Specification for Pressure Vessels, Client Spec. DEP.31.22.10.32 GEN. Vendor Jord' International Australia
-Merla sakti Abadi as QA/QC inspector for Kodeco Energy Ltd. Gas Delivery Expansion Hook Up project onshore and off shore. As per ANSI B 31..3 Process Piping Specification.. Location KE-5 CPP Central Process Compressor Madura offshore North East Java Sea

Responsibilities as QC Inspector
- Performed QC activities in accordance to Project Quality Plan, Inspection Test Plan, Manufacturing Travelers and ensuring that the manufacturing process is in compliance with Code, Technical Specs, Standard and Drawing requirement.
- Performed Incoming Material Inspection and report its status
- Performed material and welding traceability check and witness transfer of marking
- Performed painting inspection and witness for make sure the applicable procedure.
- Witness and review all test required such as witness hydro test and review NDT report.
- Co-ordinate inspection activities with third party/surveyor/client rep/authorized inspector for witness/hold point inspection as per quality plan/inspection test plan or travelers.

PT. CITRABUANA INDOLOKA - INTERTEK
Jakarta ¨C Indonesia
July 2004 to December, 2004
POSITION: QC Inspector

QC Responsibilities.
To perform inspection, verification, review and witness test according technical specification, applicable standard / code and procedure / work instruction meet client requirements.

PROJECT ASSIGNMENT
-Rekayasa Persada Joint venture Rekayasa Industri ¨C IKPT as client inspector representative for Kujang Plant 1B Ammonia ¨C Urea Bridges Strengthening Structural Project as per AWS D1.1 structural specification, Cikampek ¨C West Java
-Sekayu Bina Drilling as Inspector supervisor for drilling rigs hoisting and equipment certification including air compressors and pressure vessels as per API 617, API 8A-8C, API 11C and ASME VIII. Cirebon-West Java
-Dharma Subur Satya as QC/ NDT inspector for Migas Crane & heavy Equipment Certification for BP Tangguh. As per AWS D1.1 Structural Specification.

PT. MODY INTER INDONESIA (Moody International)
Jakarta ¨C Indonesia
January 2003 to June 2004
POSITION: QC Inspector
QC Responsibilities.
To perform inspection, verification, review and witness test according technical specification, applicable standard / code and procedure / work instruction meet client requirements.

PROJECT ASSIGNMENT
-Shell Eastern Petroleum Pte. Ltd Singapore as client inspector representative/seconded for Air Cooled Heat Exchanger HDS4 REVAMP PROJECT as per ASME VIII. Vendor Jord international c/o PT. Surya Besindo Sakti Cikande, Serang ¨C Banten, Indonesia
-J Ray Mc. Dermott as client inspector representative for Total Peciko project BDF Platform structural as per AWS D1.1 structural specification, vendor Punj Lloyd Indonesia c/o CHC Cigading Habeam Cilegon ¨C West Java.
-Chicago Bridge and Iron (CBI), Dubai ¨C UAE as client inspector representative for Nigeria LNG plus pipeline support shoes project as per AWS D1.1, vendor Binder Engineering ¨C Australia C/O Binder Indonesia.
-Technip Coplexip c/o Technip Indonesia as client resident inspector representative for Conoco Phillips BBSD Project, Malong 22 ¨C MBF - 001 Slug Catcher Skid fabrication as per ASME sect. VIII pressure vessels specification at Sanggar Sarana Baja, Jakarta.
-Spie Capag Lucas JV, Adelaide ¨C Australia as client inspector representative for Pressure vessels Horizontal gas filter Sea Gas Pipeline lorna Minerva ¨C Adelaide Australia project, vendor Jord International c/o Surya Besindo Sakti Serang - Banten
-Conoco Phillips as Client inspector representative for Block B Subsea Development Belida project various valves inspection at Crane Indonesia, Cikarang West Java.
-Kellogg Joint Venture, UK England as client inspector representative for project pipeline pipe support, PTFE slide plate and acoustic plate of Nigeria LNG plus, Egypt-Damietta segas project, Binder Engineering ¨C Australia C/O Binder Indonesia, Bekasi ¨C West Java.
-Technip Coplexip Paris ¨C France c/o Technip Indonesia as client representative inspector for Conoco Phillips BBSD material receiving verification at PT. IMSF Jakarta.
-PT. Mc Dermott Indonesia as client inspector representative for various project at Jakarta Area such as Valve Inspection at PT. Crane Indonesia, Chatodic Protection Inspection at PT. Southern Tri Star, Cikarang

PT. RIZKY ALDITA NURAGA
Bogor ¨C Indonesia
March 1997 to 2002
POSITION ; QC Inspector / NDE Coordinator
PROJECT ASSIGNMENT
-PT. SOUTHERN TRISTAR, for Clough Offshore West Seno Deep Water Project
-PT. PATRA DRILLING CONTRACTOR Balikpapan ¨C East Kalimantan.
-PT. BINDER INDONESIA, Bekasi for Kellog Joint Venture Nigeria LNG, Chicago Bridge and Iron project

PT. BUDIKARYA NASTITI
Jakarta ¨C Indonesia
January 1996 to Dec. 1996
POSITION: NDT Level II Multidiscipline Inspector

PROJECT ASSIGNMENT
-Coordinator for Pressure vessel Re-Certification PT. ATLANTIC RICHFIELD INDONESIA (ARCO) East Area North West Java Offshore

PT. BIXINDO UTAMA
Surveyor and Inspection Services
October. 1992 to Dec. 1995
POSITION: NDT Level II Multi discipline Inspector
QC / NDT Level II Inspector for various project such as PT PAL for Arco CCO Monopod platform project, Patra drilling contractor for Unocal East Kalimantan, Nippon Steel Batam, Mc Dermott Indonesia Batam, Barata Indonesia Surabaya and ARCO Indonesia North West Java Offshore.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 2726)

Go to Search Parameters...

Brief Description

Drilling Engineer, Drilling Supervisor

Post grdaution - MBA (Finance), Graduation - BE ( Mechanical Engineering) with Power and Steam Generation Projects, Operations and Maintenance Experience

SAP MM, PM

HSE Learning/Development Professional seeking position in an industrial setting.

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

* Stand watch and fire boilers kept logs, made reports as required.

Experience in Oil and Gas Industry, Marine, Certifications, and more

I have grinding experience, forklift driving license, welding experience, I have a G.E.D. Strong, Hard worker, easy to train for the right job. Goal oriented and a very driven person wanting to suceed.

As Field coordinator at BHPBilliton Suriname explorations (Aluminium) for 3.5 years i have had various safety,basic first aid and devensive driving training. TOLOV and Basic firefighting as well. Furthermore was i responsible various HSE related field tasks.

I am currently the ESP / VSD Supervisor for Encana-Ecuador in the Tarapoa field. I have extensive ESP experience with all lines of equipment and most lines of surface equipment.

Highly Trained Manager

I have served as the catalyst for successful Operations, Production, Projects, Technical Support, Client Relationship Management and Team Management, complimented by Bachelor’s Degree in Engineering (B.E) – Electrical & Electronics , Bachelor of Science (B.Sc) in Physics & Six sigma –Green belt

Experiences as QA/QC inspector and Welding in the Inspection sector at various International & national Company. Employment within the Oil & Gas, Power Plant, Structural Steel, Pipe Mill, Floating Production Storage Offloading FPSO (Offshore), Platform Modification (Offshore), Refinery and Pressure

Accounts Payable & Receivables, Bank Reconciliation, Debtos and Creditors Reconciliations, Corporate Taxation, Defereed Taxation, Part of Reporting, Inter Companies balances

Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients

Drilling Supervisor - 17 years Drilling Experience - 7 years International Experience - Safe and Efficient

I am seeking a position in your esteemed organization, Hawk Petroleum Inc. for Sales, Marketing, Trading of Petroleum Products in South East Asia (Indi)

Proficient or familiar with a variety of engineering/design softwares and office tools including Flexcom, Mathcad, Autocad,Abaqus,FS2000, Windows, UNIX, Linux, Sun Solaris, Microsoft Office tools, Open-office tools, C,C++, Java, Fortran and Perl

Safety Professional

I am flexible, reliable, company oriented, team player. I am fluent in French as well as English and I have learn Spanish.

PETROLEUM (PRODUCTION ) ENGINEER

I began working in the oil and gas industry in 1993 at the age of 17. Since then I have worked very hard to continually improve my knowledge and abilities, and have recently been promoted to Production Foreman at the age of 31. All of my experience has been in offshore California.

M.Sc Energy Economics and B.Sc Petroleum Engineering. Currently working as a Petroleum Economist, have a cumulation of 7 years in the Oil and Gas industry, 3 years + in the Upstream sector and 4 years in the Downstream Sector. Strong spreadsheet skills and intermediate level PEEP user.

Lead Instrumentation Technician

In 2002, I graduated with a Diploma in Marine Engineering. I worked as Marine Engineer on board merchant vessels and also in the shipyard as a Project Engineer. I stopped work to pursue my BEng. (Hons) in Mechanical Engineering. I am well versed in engineering softwares and EPCC procedures.

DEPOT OPERATIONS,LOGISTICS,ACCOUNTS RECEIVABLES/PAYABLE,PROCUREMENT-6YEARS

Bsc honours geophysics - geophysiscist

Experienced in a wide range of wireline services on Baker Atlas equipment, including operations in Azerbaijan, Kazakhstan, Uzbekistan, Thailand, Qatar, U.A.E (Abu Dhabi), Kuwait, KSA and Singapore Remotes. A strong educational background. Knowledge of Open Hole and Case Hole Logs, WL and TCP perfora

I work very well with little supervision, and am very good at completing tasks. I am looking for a career with a fast growing company, I have experience in a number of different areas, and am a very hard worker.

Highly experienced project professional with broad engineering, maintenance and construction experience. Competitive by nature with a consistent focus on the “Bigger Picture”. Outstanding track record and highly adept at managing high-criticality maintenance and construction projects.

Developed a Polypropylene laboratory single handed from scratch to an operational lab

Young enthusiastic Engineer (B.Tech Hons.;IIT - Kharagpur) just graduating with 120+ days of field experience in drilling , safety and scheduling. Good computer skills and a diverse course content in college.

Working in the field of GIS and Remote Sensing for the last four years with an MNC in India. Interested to work in oil and gas sector and interested to use my experience in this sector.

I am Mechanical Engineer with first class career Record. I have 4 years Exp in the power Sector. I have Boiler Proficiency Certificate, which is essentials for Boiler Operation.

My Q-HSE management experience spans more than 20 years and includes a broad spectrum from that of worker, public safety officer and emergency responder to educator, consultant and civilian contractor to both construction and general industry clients, including 21 months in Afghanistan.

Prepare all tools for next program,such as Bit.Bit Sub.Cross Over.DC.DP.Slips.Casing.Etc. maintenace and stored back properly.Watch all Equipment work properly and if something we don't expect occure I have to fix it or mentioned it to autorizhed person.Give hand to driller and manage all crew.

I’m graduated from University Technology Petronas in Mechanical Engineering (B.Eng.Hons). I have 2 years of experience as a Project Engineer and Safety Supervisor.

I am a graduate of petroleum engineering,Compile daily drilling reports in the rig during drilling operation and ensures corrective measures on issues identified by any department are carried out. Monitoring pressure, temperature and flow rate gauge(s) on process equipments.

HSSE Management System Coordinator / Sales / International Buyer

11 years of heavy equipment operation and supervisory experience

RPL Certified* Landman with an MBA and background in Project Management

Having exposure in erection, commissioning, operation and maintenance of Utilities & Power Plants like Gas turbines Power Plant ,Wartsila Diesel Power Plants, High pressure steam Boilers , Steam Turbines, Preatment Plants of Raw Water and Chlorination system , Clarifloculators , DM Water Plants,

I work for around 20 years in the field of Control Room&Field Operator for Polymerisation Fiber Plant in Indian Organic Chemicals Ltd Manali Chennai, 16 Years Exp CONTROL ROOM PRODUCTION ZEOLITE Plant Operator in Oman Chemical Industries Company (S.A.O.G. At Sultanate Of Oman Muscat, 4 years exp

Bachelors Degree in Mechnaical Engg. Profesional Certification as Chief Engineer on board Motor Ships. Thirty Eight (38) years of Marine & Offshore (Oil & Gas )Engineering projects

Experienced Directional Drilling Consultant

GIS Analyst and Mapping Specialist, Geotechnician, Landman

Living Quarters, offshore accommodation, modular buildings, upgrades, conversions, new builds

Free! Offshore Maintenance Experience

Thermo-Energy Engineer

I am a dynamic, reliable and autonomus person who like working in team. Over the past years, I have demonstrated a lot of leadership. I enjoy new challenges. My previous experiences helped me to discover new fields and acquire a methodic way of working. I possess a strong sense of responsibility. M

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out