Resume - Drilling Supervisor. Mud and Cement Supervisor.Drilling Engineer.Mud and Cement ...

Misco Jobs

Resume #84891

CONTACT INFORMATION:
View contact information...

Date of birth: November-11-1968.
Place of birth: Medrissa – Tiaret - Algeria.
Age: 41 years.
Nationality: Algerian.
Marital status: Single.
Gender: Male.
Military duties: Cleared from 1995 till 1997 (Algerian army).

Education
September 1987- July 1992: Drilling engineer from the Algerian Petroleum Institute.
Key Experience
15 years on shore oil industry experience.
Horizontal and vertical well operations.
Extensive horizontal well experience.
Exploration and development well experience.
Experience with Drilling Planning and Data Management softwares.
Project of my higher education:
September 1991-July 1992: Proposal of a type of drilling fluid for the reduction of reservoir damage.
Certification
IWCF: International Well Control Forum.
Supervisor level from the SONATRACH-AMT-FOR- DRMD centre.
Expiry date: September 2008.
HSE: IOSH1: HSE certification first level from the Corporate University Robert Gordon University and Algerian Petroleum
Institute.
IOSH2: HSE certification second level from the Corporate University Robert Gordon University and Algerian Petroleum
Institute.
Training
Drilling training with TOTAL.
Drilling fluids training with BHI (Baker Hughes Inteq).
Cementing training with Schlumberger Dowell.
Cementing training with BJ.
Drilling fluids training with ENSP/DFF.
DIMS, COMPASS, StressCheck and Wellplan training with Landmark Graphics Corporation (Halliburton).
Professional experience
From 1992 up to now: Employed by SONATRACH, the main Algerian Oil Company; on its on shore rigs.
2004-up to now: Drilling supervisor.
2000-2004: Drilling fluids, Waste management and cementing engineer.
Drilling engineer, Well planner and DIMS instructor.
1997-1999: Mud and Cement supervisor.
1992-1995: Drilling supervisor.
Computer skills
Microsoft products
Running and using the following products:
Windows, Word, Excel, PowerPoint, Access and Outlook.
Landmark products
Running and using the following softwares:
DIMS, Data Analyzer, Data Checker, DIMS mail and DIMS Communications.
Compass, Wellplan and Stress Check.
BJ products
Running and using the following product:
Welltemp and CemFacts.
Schlumberger products
Osprey Risk, Osprey Reports, CemCade and Gas Migration Advisor.
Internet
Using internet.
Languages
Arabic: Written and spoken, native.
French: Written and spoken, excellent.
English: Written and spoken, average.
Other
Driving license.
Availability
Immediate.
Centre of interests
Sport, reading.
Additional information:

Drilling engineering (Drilling and Mud/Cement Engineering): From the conceptual phase to the completion for both wells (Development and Exploration wells, vertical and deviated wells). Please see below for more details.
Drilling supervision: For both wells (Development and Exploration wells, vertical and deviated wells). Please see below for more details.
Mud and cement supervision: For both wells (Development and Exploration wells, vertical and deviated wells). Please see below for more details.
Mainly worked with:
- Oil based mud; Water based mud (Salt Saturated Mud) and Spud muds. Heavy muds up to 2.20 SG.
- Extended (Bentonite) cement, neat cement, heavy cement, lite cement, gas block cement...etc
Waste management: Evaluation of the trials made by the waste management service company.
DIMS: I have trained my colleagues DIMS for a while.
Drilling Softwares: As it is clearly stated above, I can run the softwares listed above.

Drilling Engineer (Drilling and Mud/Cement Engineer):
-Acting as the focal point for the team: The geologist, the cementing engineer, the mud engineer, the directional engineer, the drilling superintendant…etc.
-I was mainly responsible of the following tasks:
Development of drilling programs for horizontal and vertical wells:
Review of the offset wells (Problems encountered in these wells, solutions adopted …etc.)
BHA design, bit selection, Casing design …etc.
Calculations and analysis of Hydraulics, torque and drag…etc.
Development of cementing programs:
Centralizer programs, Drag analysis…etc.
Cement design, pressure profile (pore pressure and frac pressure considerations), temperature considerations…etc.
Development of drilling fluids programs:
Drilling fluids design, expected volumes…etc.
Expected mud weights, hole cleaning…etc.
Updating the drilling programs (New drilling program: Side track after an unsuccessful fishing: Inclination, Azimuth…etc.)
Well abandonment and suspension program.
Generating the end of well reports.
Problems investigation.
Fishing operations.
Follow up of the activity of the rigs:
Follow up of the drilling progress.
Log quality control and exploitation of the results:
Caliper logs.
CBL-VDL-USIT-CAST-V logs.
SONIC logs…etc.
Coordination with the service companies.
Best practices and lessons learned.
Proposal studies and feasibility studies.
Member in the standardization committee.
DIMS Instructor.
Elaborating the pick lists for DIMS.
Evaluation of the waste management trials done on the rigs.
Follow up of the costs.
Service quality meeting.
Daily morning meeting.
Prespud meeting.
Auditing the laboratories (Mud laboratories and Cement laboratories).
Updating databases…etc.

Well planner: Especially for exploration wells.
Rig:
Which rig is available for the next platform (well) (According to performance...etc.)?
Access to the rig:
How are we going to access the rig (the routes…etc.)?
Will it be necessary to move the centreline of the well (Consider the centreline of the well situated on a dune (sand dune)?
Water:
From where are we going to feed the rig with water?
In case of water trucking:
How many trucks do we need?
What kind of truck do we require?
Cementing company:
Which cementing company are we going to choose?
Does the cementing company have a base in the region where are we going to drill the hole or not?
Is the "call out" option available? And if not do we need an amendment?
New mini base:
Will it be necessary to establish a new mini base (for the mud products, casings, jars...etc.)? …etc.

Drilling Supervisor:
-Acting as the focal point for the team: the rig manager, the geologist, the logging engineer, the cementing engineer, the mud engineer, the directional engineer, the drilling superintendant…etc.
-Follow up and management of the operations as a drilling supervisor for deep wells, horizontal wells and vertical wells using Kelly drilling or Top drive drilling:
Decision maker for usual and unusual situations.
Ensuring there is no compromise on safety or environmental standards.
Responsible for the day-to-day on site planning and execution of drilling activities.
Resolving drilling problems: stuck pipe, lost circulations…etc.
Performing: kick drill, BOP test, Shoe bond test, Formation integrity test, Casing test…etc.
Casing running and cementing and liner running and cementing.
Discussing contingency plans.
Casing remedial jobs (Injectivity test, squeeze cement…etc.).
Platform acceptance.
Rig acceptance.
Daily drilling reporting.
Operation risk assessment.
Incident reporting.
Non productive time reporting.
Document control and ticket control.
Log quality control and exploitation of the results:
Caliper logs.
CBL-VDL-USIT-CAST-V logs.
Prespud meeting.
Prejob safety meeting.
Daily morning meeting.
Instructions to rig manager, mud engineer, directional driller, cementing representative…etc.
Inventory check and its update (Back up bits, nozzles, casing spools, mud products…etc.).
Requirements to base (Jars to backload, Casing to provide… etc.)…etc.
Mainly responsible that the work is done according to plan (Safety and Cost)

Mud and Cement supervisor:
(Mainly worked with:
-Oil based mud, Water based mud (Salt Saturated Mud) and Spud muds. Heavy muds up to 2.20 SG.
-Extended (Bentonite) cement, neat cement, heavy cement, lite cement, gas block cement...etc.).

Acting as the focal point for the team: the rig manager, the cementing engineer, the mud engineer, the drilling superintendant…etc.
Follow up and management of the operations as a Mud and Cement supervisor:
Mud lab acceptance.
Cementing unit acceptance (pressure test, shut off check, tank to tank check…etc).
Responsible of the management of the drilling fluids:
Building mud, anticipating on operations…etc
Quality check of the programs
Mud programs and cementing programs.
Cementing calculations (Quantity check, volumes check…etc.)
Casing and liner cementing.
Tank management (Build mud in this pit, Build the next section mud in that tank, dilution from the other tank, displace from this tank during cementing…etc.).
Mud contamination treatment.
Daily drilling fluids reporting.
Cementing reporting.
Resolving drilling fluids and cementing problems.
Operation risk assessment.
Non productive time reporting.
Inventory check and its update (Mud products…etc.).
Instructions to rig manager (Screen change, tank cleaning…etc.).
Instructions to mud engineer (Build mud, dilution rate, adding additives…etc.).
Requirements to base (Products to backload, Necessary additives for the lab…etc)…etc.
Log quality control and exploitation of the results:
Caliper logs.
CBL-VDL-USIT-CAST-V logs.
Mainly responsible that the work is done according to plan (Safety and Cost).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 2717)

Go to Search Parameters...

Brief Description

09 years of experience in an oil refinery as field operator at coke handling unit with Kuwait National Petroleum

As you find below in my CV, I have many years of experience in the petroleum Industry, operationally and administratively. I am educated to college level in petroleum technology. I speak four Languages these support my excellent communication

Work over and completions well site supervisor - 18 years in industry

Automation, Instrument and Control Engineer Manager

Service Supervisor with 15 years experience

Feild operation,panel operation of petrochemical company(Gas to liquid) over 10 years experience.I have good knowledge about permit system,safety,fire fghting,start up and shut down,process safety management,P&ID,PFD

I have held the position of Permit to Work Coordinato for nearly 4 years now. My background is in the pre-commissioning, commissioning and start-up of oil and gas facilities. This was preceded by 9 years of oil and gas plant operations experience.

Senior Drilling Supervisor for 12 years. 19 years in oil industry. •Enthusiastic, determined, adaptable and focused with a good sense of humor. •Excellent management and team working skills, experienced in a wide range of cultures and environments.

To obtain a job in the in the Oil and Gas Industry that will challenge my abilities.

I am an experienced Senior Petro-chemical Fire Officer currently employed by Sembcorp Utilities (UK) Limited with an interest in advancing my career with new challenges and experiences in Operational Emergency Response.

BSc in General Geology, 2001 (Banha University - Egypt)

QUALIFICATION: High school certificate with science in 1991 from Sargodha Pakistan Higher secondry school certificate with pre-Engineering in 1993 from Sargodha Pakistan Technical training:One year apprentice ship from NFC institute of engineering and technology Multan Pakistan After completion of i

I have more than 8 years of experience as Electrical and Control Engineer for Oil & Gas, Petrochemical and Metal Industry , I commision 760 KM long Crude oil Pipeline and was responsilbe for commissioning of more than 50 pumping and Compression stations and thier related field instrumenst.

Oil Movements & Shipping Field Operator

Can setup run &standardise petroleu testing lab. Familiar with all petrleum product testings, full acquainted with ISO-9002 Quality assurance system & with MS Office & email/internet applications. Accredited as Petroleum Inspector from IFIA, UK. Neatness, accuracy, thoroughness in work

Myself Sanjay Kumar working as Onboard Processing Geophysicist(ProMAX) with Global Geophysical Services, Houston, USA for 3D OBC , EDA and NM Tapti project, ONGC, India

Understanding of drilling and well servicing. Proficient well optimizer, Proficient pipefitting, Mechanically Inclined, Computer competent, punctual.

Operates processes in the plant and handled control room DCS or PLC, mostly equipment such waste gas treatment plant, waste water treatment plant, chiller, air compressor, kneader, calciner, cooling tower, furnace and knowledge in the tank farm activities, some analysis required in the process

Control Room Operator (DCS)Honeywell Chief Operator/Step-up Chief Operator Honeywell TDC2000/3000/Plantscape Refinery Unit Trainer - Classroom/OJT Technical Writer/Author (Procedures) Refinery Unit Start-up/Shut Down Commission New Equipment/Processes Precommissioning Coordinator Safety

Dear Sir/Madam: My goal is to obtain a entry level position in a drilling crew in offshore, anywhere around the world.

10 YRS EXP IN TERMINAL OPERATIONS

Engineer of a oil & gas plant & pipelines (Exploitation, design & construction)

To ensure the correct operation of gas gathering, compression and treatment plant. day to day control of the operation of the compression station, fire fighting system, look after the ESD system, round the clock shift operation activities of the large complex of compressing natural gas, review sche

Rig manager workover/completions/well site supervisor

Project Management and Processes; PRINCE2 Methodology and Processes; Microsoft Project; Microsoft SharePoint Technologies; Design and Architecture; Migration Projects (2003 to 2007); Branding and Customization (Masterpage); Site and Lists Definitions

Iam an innovative, dedicative, initiative and dynamic HSE person. I have experience 15 years in HSE OIL and Gas Industry, especially in develop HSE Management System, Environmental Management System ISO 14001 and Contractor HSE Mnagement System.

Process / Systems / Operations

Drilling Superintendent - Senior Drilling Supervisor, International Positions Only

Objective: To share knowledge on Best Practices on Health, Safety and Environment (HSE) in the development and implementation of HSE Management System and promote a culture of Continuous Improvement.

I have extensive experience in Production Operations in the oil and gas industry.

Experience in Exploration and Development Geology, having involved in exploration of new areas and Enhancing of Oil Recovery in the fields of Northern Potwar Deform Zone and Middle Indus Basin of Pakistan. Day to day duties include studying the current reservoir properties via interpretation of geop

Oil and gas Utilities Senior Operator, start up, power plant shift enginner

Master Degree Of Science Major In (( Synthesis of cascaded refrigeration systems)), *PUBLICATION:F. Rabea, S. aly and M. awad," Fuzzy approach for cascade Refrigeration Synthesis ", HYDROCARBON PROCESSING March 2008.VOL.87 NO.3,** HYSYS PROCESS SIMULATOR , Word – Excel – Power pointInternet,windows*

Logistics /Material Controller

I have the professional experience, training background and track record for which you are searching. In addition, I am motivated and enthusiastic team player who would appreciate the opportunity to contribute to your company’s success.

Batchelor Degree, Chemistry with 17 years of exeperince in Process Industry

HSE/Safety Officer NEBOSH CERTIFIED

INTERNATIONAL ENERGY, OIL, AND GAS INDUSTRY EXECUTIVE

Wellsite Geologist onshore and offshore drilling rigs.

I am a Petroleum Engineer with BSC degree. I am working at Oasis( Waha) Oil company for about 14 years. I worked in many section drilling & Workover as Company man on rigs, supervisor at Waha office, Production operator, foreman, Prod Supvr. 28 weeks Drillg & Prod. in U.K, 4 weeks Hor. Drlg Canada

Graduate in chemistry having 17yrs experience in the field of refinery operation including 12yrs overseas experience,currently working SaudiAramco-ExxonMobil refinery in yanbu,saudi arabia,having experience in precommissioning,commissioning and start up of the refinery, looking for a suitable job.

Experienced Managment support as commercial manager,contract administration

I have four Years of experience in Desert at the Yemen. 1. Maintenance automatic systems at the Oil &Gas Field, Oil &Gas processing, pipelines and terminals.Maintenance CAMP equipment. 3. I make the orders on spare parts for Equipment.

Working as Mud Engineer in MI - Dubai from March 2007.

Drilling Supervisor. Mud and Cement Supervisor.Drilling Engineer.Mud and Cement Engineer.

Flexible, skilled mechanical engineer, specialised in high safety Operations like the Ariane 4 Launcher Assembly, Team leader, excellent English and French, search for job from Companies interested to increase business abroad

PETROLEUM ENGINEER, WORK OVER SUPERVISOR, WELL SERVICE, FACILITY ENGINEERING, WELL TESTING, ARTIFICIAL LIFT, ONSHORE/OFFSHORE OPERATIONS

Offshore and land rig maintenance(18years experience, mechanical & electrical). College Grad. Naval Nuclear Power - Mechanical Operator - Submarines Diesel overhauls on CAT D-399's (27). Many SCR schools and numerous technical schools.

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I¡¦m seeking a challenging position as a Drilling Supervisor.

Manager HSE, HSE Advisor with 9.1 Years Experience in Petroleum Development Oman, Reliance Industries Limited (E&P) (Oil & Gas Field Offshore & Onshore, Civil Construction Field)

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out